Hostname: page-component-788cddb947-t9bwh Total loading time: 0 Render date: 2024-10-15T15:41:55.170Z Has data issue: false hasContentIssue false

Low-profile high gain circularly polarized CRLH transmission line inspired antenna with artificial magnetic conductor for wearable applications

Published online by Cambridge University Press:  18 November 2022

Mohammad Hussain Abbas
Affiliation:
Department of ECE, UIET, Maharshi Dayanand University, Rohtak, India
Shamsher Singh
Affiliation:
Department of ECE, UIET, Maharshi Dayanand University, Rohtak, India
Ankit Sharma
Affiliation:
Department of ECE, Galgotias College of Engineering and Technology, Greater Noida, India
Deepak Gangwar*
Affiliation:
Department of ECE, Bharati Vidyapeeth's College of Engineering, New Delhi, India
*
Author for correspondence: Deepak Gangwar, E-mail: er.deepakgangwar@gmail.com

Abstract

In this work, a compact, wideband, circularly polarized wearable antenna is proposed using asymmetric coplanar strip feeding for wireless health monitor applications in the ISM frequency band. The proposed antenna consists of a composite right/left transmission line (CRLH TL) inspired structure to achieve compactness and a rectangular ring slot is created in the metallic ground to enhance the CP radiation of the antenna. A 5 × 5 artificial magnetic conductor unit cell-based metasurface is designed which is operating at 2.4 GHz as a ground plane for the CRLH-based CP antenna. Implementation of AMC-based metasurface as a ground plane results in enhancement of radiation characteristics of CRLH TL antenna. The proposed antenna has a small footprint of 50 × 50 mm2 with measured impedance bandwidth of 2.3–3.2 GHz. The 3 dB axial ratio bandwidth of the proposed antenna is 2.36–2.78 GHz with peak gain of 5.89 dBi. Simulation and experimental results show that proposed AMC-based antenna is robust in terms of structural deformation. Further, to validate the performance of the antenna for biomedical applications, we have simulated the proposed antenna with human phantom model. The proposed antenna exhibits stable scattering and radiation characteristics with the phantom body environment and due to the inclusion of AMC structure, the proposed design satisfies maximum specific absorption rate value given as per the IEEE standard safety guidelines.

Type
Antenna Design, Modeling and Measurements
Copyright
© The Author(s), 2022. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Haga, N, Saito, K, Takahashi, M and Ito, K (2009) Characteristics of cavity slot antenna for body-area networks. IEEE Transactions on Antennas and Propagation 57, 837843.CrossRefGoogle Scholar
Halland, PS and Hao, Y (2012) Antennas and Propagation for Body-Centric Wireless Communications. Artech House, https://uk.artechhouse.com/Antennas-and-Propagation-for-Body-Centric-Wireless-Communications-Second-Edition-P1466.aspxGoogle Scholar
Zu, H-R, Wu, B and Zhang, Y-H (2020) Circularly polarized wearable antenna with low profile and low specific absorption rate using highly conductive graphene film. IEEE Antennas and Wireless Propagation Letters 19, 23542358.CrossRefGoogle Scholar
Arif, A, Zubair, M, Ali, M, Khan, MU and Mehmood, MQ (2019) A compact, low-profile fractal antenna for wearable on-body WBAN applications. IEEE Antennas and Wireless Propagation Letters 18, 981985.CrossRefGoogle Scholar
Pei, R, Leach, M, Lim, EG, Wang, Z, Wang, J, Wang, Y, Jiang, Z and Huang, Y (2020) Wearable EBG-backed belt antenna for smart on-body applications. IEEE Transactions on Industrial Informatics 16, 71777189.CrossRefGoogle Scholar
Joshi, R, Hussin, EFNM, Soh, PJ, Jamlos, MF, Lago, H, Al-Hadi, AA and Podilchak, SK (2020) Dual-band, dual-sense textile antenna with AMC backing for localization using GPS and WBAN/WLAN. IEEE Access 8, 8946889478.CrossRefGoogle Scholar
Sambandam, P, Kanagasabai, M, Ramadoss, S, Natarajan, R, Alsath, MG, Shanmuganathan, S, Sindhadevi, M and Palaniswamy, SK (2020) Compact monopole antenna backed with fork-slotted EBG for wearable applications. IEEE Antennas and Wireless Propagation Letters 19, 228232.CrossRefGoogle Scholar
Gao, G, Yang, C, Hu, B, Zhang, R and Wang, S (2019) A wide-bandwidth wearable all-textile PIFA with dual resonance modes for 5 GHz WLAN applications. IEEE Transactions on Antennas and Propagation 67, 42064211.CrossRefGoogle Scholar
Foroozesh, A and Shafai, L (2011) Investigation in to the application of artificial magnetic conductors to bandwidth broadening, gain enhancement and beam shaping of low profile and conventional monopole antennas. IEEE Transactions on Antennas and Propagation 59, 420.CrossRefGoogle Scholar
Zhu, S and Langley, R (2009) Dual-band wearable textile antenna on an EBG substrate. IEEE Transactions on Antennas and Propagation 57, 926935.CrossRefGoogle Scholar
Raad, HR, Abbosh, AI, Al-Rizzo, HM and Rucker, DG (2013) Flexible and compact AMC based antenna for telemedicine applications. IEEE Transactions on Antennas and Propagation 61, 524531.CrossRefGoogle Scholar
Zhang, Y, von Hagen, J, Younis, M, Fischer, C and Wiesbeck, W (2003) Planar artificial magnetic conductors and patch antennas. IEEE Transactions on Antennas and Propagation 51, 27042712.CrossRefGoogle Scholar
Kern, DJ, Werner, DH, Monorchio, A, Lanuzza, L and Wilhelm, MJ (2005) The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces. IEEE Transactions on Antennas and Propagation 53, 817.CrossRefGoogle Scholar
Ashyap, AYI, Dahlan, SHB, Zainal Abidin, Z, Abbasi, MI, Kamarudin, MR, Majid, HA, Dahri, MH, Jamaluddin, MH and Alomainy, A (2020) An overview of electromagnetic band-gap integrated wearable antennas. IEEE Access 8, 76417658.CrossRefGoogle Scholar
Mantash, M, Tarot, AC, Collardey, S and Mahdjoubi, K (2016) Design methodology for wearable antenna on artificial magnetic conductor using stretch conductive fabric. Electronics Letters 52, 9596.CrossRefGoogle Scholar
Yan, S, Soh, PJ and Vandenbosch, GA (2014) Low-profile dual-band textile antenna with artificial magnetic conductor plane. IEEE Transactions on Antennas and Propagation 62, 64876490.CrossRefGoogle Scholar
Gao, G, Zhang, R-F, Geng, W-F, Meng, H-J and Hu, B (2020) Characteristic mode analysis of a nonuniform metasurface antenna for wearable applications. IEEE Antennas and Wireless Propagation Letters 19, 13551359.CrossRefGoogle Scholar
Ramadan, M and Dahle, R (2019) Characterization of 3-D printed flexible heterogeneous substrate designs for wearable antennas. IEEE Transactions on Antennas and Propagation 67, 28962903.CrossRefGoogle Scholar
Kim, S, Ren, Y, Lee, H, Rida, A, Nikolaou, S and Tentzeris, MM (2012) Monopole antenna with inkjet-printed EBG array on paper substrate for wearable applications. IEEE Antennas and Wireless Propagation Letters 11, 663666.CrossRefGoogle Scholar
Agarwal, K, Guo, Y and Salam, B (2016) Wearable AMC backed near endfire antenna for on-body communications on latex substrate. IEEE Transactions on Components, Packaging and Manufacturing Technology 6, 346358.CrossRefGoogle Scholar
Rizwan, M, Khan, MWA, Sydänheimo, L, Virkki, J and Ukkonen, L (2017) Flexible and stretchable brush-painted wearable antenna on a three-dimensional (3-D) printed substrate. IEEE Antennas and Wireless Propagation Letters 16, 31083112.CrossRefGoogle Scholar
Catarinucci, L, Chietera, FP and Colella, R (2020) Permittivity-customizable ceramic-doped silicone substrates shaped with 3-D-printed molds to design flexible and conformal antennas. IEEE Transactions on Antennas and Propagation 68, 49674972.CrossRefGoogle Scholar
Alemaryeen, A and Noghanian, S (2019) On-body low-profile textile antenna with artificial magnetic conductor. IEEE Transactions on Antennas and Propagation 67, 36493656.CrossRefGoogle Scholar
Lai, J, Wang, J, Sun, W, Zhao, R and Zeng, H (2022) A low profile artificial magnetic conductor based tri-band antenna for wearable applications. Microwave and Optical Technology Letters 64, 123129.CrossRefGoogle Scholar
Khajeh-Khalili, F, Shahriari, A and Haghshenas, F (2021) A simple method to simultaneously increase the gain and bandwidth of wearable antennas for application in medical/communications systems. International Journal of Microwave and Wireless Technologies 13, 374380.CrossRefGoogle Scholar
Kumar, A, De, A and Jain, RK (2022) Circular polarized two-element textile antenna with high isolation and polarization diversity for wearable applications. International Journal of Microwave and Wireless Technologies, 19. doi: 10.1017/S1759078722000332.Google Scholar
Lin, Z, Liu, R, Wang, X, Zheng, H, Wang, M and Li, E (2020) Metasurface: changing polarization from linear to circular for airborne antenna. AEU-International Journal of Electronics and Communications 116, 153086.Google Scholar
Liu, R, Zhang, K, Li, Z, Cui, W, Liang, W, Wang, M, Fan, C, Zheng, H and Li, E (2021) A wideband circular polarization implantable antenna for health monitor microsystem. IEEE Antennas and Wireless Propagation Letters 20, 848852.CrossRefGoogle Scholar
Ameen, M and Chaudhary, RK (2020) A compact circularly polarized antenna using CRLH inspired transmission line and coupled ring resonator. AEU-International Journal of Electronics and Communications 121, 153238.Google Scholar
Ameen, M and Chaudhary, RK (2019) Metamaterial-based wideband circularly polarised antenna with rotated V-shaped metasurface for small satellite applications. Electronics Letters 55, 365366.CrossRefGoogle Scholar