This paper assesses new commercial opportunities in space. The main conclusion is that spaceplanes can reduce the cost of human transport to orbit sufficiently for large new commercial markets to develop. Combining the reusability of spaceplanes with the high traffic levels of space tourism offers the prospect of a thousandfold reduction in the cost per seat to orbit. The result will be airline operations to orbit involving dozens of spaceplanes, each capable of one or two flights per day. These low costs will make possible a rapid expansion of space science and exploration.

The prototype of a small orbital spaceplane, needed to trigger this line of development, could be developed in about six years at a cost comparable to one or two flights of the Space Shuttle. It might be possible to progress from this prototype to airline operations within ten years, given a massive development effort.

This paper describes the development and validation of a high fidelity simulation model of the Bell 412 helicopter for handling qualities and flight control investigations. The base-line model features a rigid, articulated blade-element formulation of the main rotor, with flap and lag degrees of freedom. The Bell 412 HP engine/governor dynamics are represented by a second-order system. Other key features of the base-line model include a finite-state dynamic inflow model and lag damper dynamics. The base-line model gives excellent agreement with flight-test data over the speed range 15-120kt for on-axis responses. Prediction of off-axis responses is less accurate. Several model enhancement options were introduced to obtain an improved off-axis response. It is shown that the pitch/roll off-axis responses in transient manoeuvres can be improved significantly by including wake geometry distortion effects in the Peters-He finite-state dynamic inflow model.

The feasibility of using neutrally-buoyant (or fully-buoyant) airships for passenger and cargo transportation is investigated. The drag coefficients of rigid and non-rigid airships are deduced from flight data. Comparisons are made with empirical drag formulas and previous wind tunnel data. Some general trends for airship drag are derived. The mass breakdown of non-rigid airships with hull volumes up to 35,000m3 is analysed using parametric equations. The maximum feasible airspeed and useful load carrying capacity of projected airships are calculated. ‘Specific productivity’ is found to be lower than values achievable with fixed-wing aircraft, but ‘fuel-specific productivity’ is found to be competitive, confirming results of a previous NASA study. The use of gaseous hydrogen and fuel cells is briefly discussed.

Lean techniques are having a major impact on aerospace manufacturing. However, the cost and value of aerospace (and many other) products is determined primarily in product development. Migrating lean to engineering processes is ongoing in the industry, and a subject of study at the MIT Lean Aerospace Initiative. This paper summarises findings to date, with references to both research literature and successful implementation examples. To implement lean engineering, a three-part approach is needed: Creating the right products, with effective lifecycle and enterprise integration, using efficient engineering processes.

Although test rig data exists for ¼ circle turning vanes, the actual performance of these vanes once installed in a wind tunnel, and the extent to which test rig results are replicated, is rarely known. This paper compares pressure loss coefficient and velocity profile data from a vane test module with measurements taken in the low speed wind tunnel described in Ref. 1.