Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-24T16:17:32.026Z Has data issue: false hasContentIssue false

Leaching Studies of Non-Metallic Materials for Nuclear Fuel Immobilization Containers

Published online by Cambridge University Press:  26 February 2011

M. Onofrei
Affiliation:
Atomic Energy of Canada Limited, Whiteshell Nuclear Research Establishment, Pinawa, Manitoba ROE 1L0, Canada
D. K. Raine
Affiliation:
Atomic Energy of Canada Limited, Whiteshell Nuclear Research Establishment, Pinawa, Manitoba ROE 1L0, Canada
L. Brown
Affiliation:
Atomic Energy of Canada Limited, Whiteshell Nuclear Research Establishment, Pinawa, Manitoba ROE 1L0, Canada
F. Stanchell
Affiliation:
Atomic Energy of Canada Limited, Whiteshell Nuclear Research Establishment, Pinawa, Manitoba ROE 1L0, Canada
Get access

Abstract

The leaching behaviour of various ceramics was studied as part of a program to evaluate their potential use as container material for very long term containment of nuclear fuel waste under conditions of deep geologic disposal.

Samples of four grades of Al2O3, stabilized ZrO2, TiO2, a cermet (70% A12O3 - 30% TiC) and porcelain have been leached in deionized distilled water, Standard Canadian Shield Saline Solution (SCSSS), and SCSSS plus 20% Na-bentonite under static conditions at 100°C for periods up to 120 d.

The results of these ongoing leaching experiments suggest that the controlling features of the ceramic leaching process were leachant composition, and the presence and concentration of ions in the solution capable of preferentially precipitating on the ceramic surface, i.e., silicon, Mg2+, Ca2+, etc. Weight losses were determined after leaching. The initial leach rates showed a dependence upon ceramic purity and the processing used to prepare the ceramics, as well as the leachant composition. Also, it was apparent that the decrease of leach rates with time occurred as a result of the ceramic components in the leachant approaching their saturation limits.

Type
Research Article
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Boulton, J. (Editor), “Management of Radioactive Fuel Wastes: The Canadian Disposal Program,” Atomic Energy of Canada Limited Report, AECL-6314 (1979).Google Scholar
[2] Cameron, D. J., “Fuel Isolation Research For The Canadian Nuclear Fuel Waste Management Program,” Atomic Energy of Canada Limited Report AECL-6834 (1982)CrossRefGoogle Scholar
[3] Nuttall, K. and Urbanic, V. F., “An Assessment of Materials For Nuclear Fuel Immobilization Containers,” Atomic Energy of Canada Limited Report AECL-6440 (1981).Google Scholar
[4] Fullam, H. T., “Use of Ceramic Materials in Waste-Package Systems for Geologic Disposal of Nuclear Wastes,” PNL-3447 (1980).Google Scholar
[5] Mattson, E., “Corrosion Resistance of Canisters for Final Disposal of Spent Nuclear Fuel,” in Scientific Basis for Nuclear Waste Management, Vol. 1, Plenum Press, NY., pp 271281 (1978)Google Scholar
[6] Mattson, E., Ed., “Aluminum Oxide as an Encapsulation Material for Unreprocessed Nuclear Fuel Waste - Evaluation from the Viewpoint of Corrosion.” KBS 80-15 (1980).Google Scholar
[7] Smailor, E., Storch, W. and Engelke, H., “Corrosion Studies of Non-Metallic Inorganic Materials for HLW Packaging Design,” KfK 3438 (1983).Google Scholar
[8] Sargent, F. P., “Applied Chemistry and Geochemistry Research for the Canadian Nuclear Fuel Waste Management Program,” Atomic Energy of Canada Limited Technical Record, TR-149 (1982).Google Scholar
[9] Hayward, P. J., Doren, F. E., Cechetto, E. V. and Mitchell, S. L., “Leaching Studies of Natural and Synthetic Titanite & Potential Host for Wastes From the Reprocessing of Canadian Nuclear Fuel” in, Canadian Mineralogist, Vol. 21, pp. 611623 (1983).Google Scholar