The Vela pulsar (J0835$-$4510) is known to exhibit variations in Faraday rotation and dispersion on multi-decade timescales due to the changing sightline through the surrounding Vela supernova remnant and the Gum Nebula. Until now, variations in Faraday rotation towards Vela have not been studied on timescales less than around a decade. We present the results of a high-cadence observing campaign carried out with the Aperture Array Verification System 2 (AAVS2), a prototype SKA-Low station, which received a significant bandwidth upgrade in 2022. We collected observations of the Vela pulsar and PSR J0630$-$2834 (a nearby pulsar located outside the Gum Nebula), spanning $\sim$1 and $\sim$0.3 yr, respectively, and searched for linear trends in the rotation measure (RM) as a function of time. We do not detect any significant trends on this timescale ($\sim$months) for either pulsar, but the constraints could be greatly improved with more accurate ionospheric models. For the Vela pulsar, the combination of our data and historical data from the published literature have enabled us to model long-term correlated trends in RM and dispersion measure (DM) over the past two decades. We detect a change in DM of $\sim$0.3 $\mathrm{cm}^{-3}\,\mathrm{pc}$ which corresponds to a change in electron density of $\sim$$10^5\,\mathrm{cm}^{-3}$ on a transverse length scale of $\sim$1–2 au. The apparent magnetic field strength in the time-varying region changes from $240^{+30}_{-20}\,\mu\mathrm{G}$ to $-6.2^{+0.7}_{-0.9}\,\mu\mathrm{G}$ over the time span of the dataset. As well as providing an important validation of polarimetry, this work highlights the pulsar monitoring capabilities of SKA-Low stations, and the niche science opportunities they offer for high-precision polarimetry and probing the microstructure of the magneto-ionic interstellar medium.

We present a demonstration version of a commensal pipeline for Fast Radio Burst (FRB) searches using a real-time incoherent beam from the Murchison Widefield Array (MWA). The main science target of the pipeline are bright nearby FRBs from the local Universe (including Galactic FRBs like from SGR 1935+2154) which are the best candidates to probe FRB progenitors and understand physical mechanisms powering these extremely energetic events. Recent FRB detections by LOFAR (down to 110 MHz), the Green Bank Telescope (at 350 MHz), and Canadian Hydrogen Intensity Mapping Experiment (CHIME) detections extending down to 400 MHz, prove that there is a population of FRBs that can be detected below 350 MHz. The new MWA beamformer, known as the ‘MWAX multibeam beamformer’, can form multiple incoherent and coherent beams (with different parameters) commensally to any ongoing MWA observations. One of the beams is currently used for FRB searches (tested in 10 kHz frequency resolution and time resolutions between 0.1 and 100 ms). A second beam (in 1 Hz and 1 s frequency and time resolutions, respectively) is used for the Search for Extraterrestrial Intelligence (SETI) project. This paper focuses on the FRB search pipeline and its verification on selected known bright pulsars. The pipeline uses the FREDDA implementation of the Fast Dispersion Measure Transform algorithm (FDMT) for single pulse searches. Initially, it was tested during standard MWA observations, and more recently using dedicated observations of a sample of 11 bright pulsars. The pulsar PSR J0835-4510 (Vela) has been routinely used as the primary probe of the data quality because its folded profile was always detected in the frequency band 200 – 230 MHz with typical signal-to-noise ratio $>$10, which agrees with the expectations. Similarly, the low dispersion measure pulsar PSR B0950+08 was always detected in folded profile in the frequency band 140–170 MHz and so far has been the only object for which single pulses were detected. We present the estimated sensitivity of the search in the currently limited observing bandwidth of a single MWA coarse channel (1.28 MHz) and for the upgraded, future system with 12.8 MHz (10 channels) of bandwidth. Based on expected sensitivity and existing FRB rate measurements, we project an FRB detection rate between a few and a few tens per year with large uncertainty due to unknown FRB rates at low frequencies.

Typical radio interferometer observations are performed assuming the source of radiation to be in the far-field of the instrument, resulting in a two-dimensional Fourier relationship between the observed visibilities in the aperture plane and the sky brightness distribution (over a small field of view). When near-field objects are present in an observation, the standard approach applies far-field delays during correlation, resulting in loss of signal coherence for the signal from the near-field object. In this paper, we demonstrate near-field aperture synthesis techniques using a Murchison Widefield Array observation of the International Space Station (ISS), as it appears as a bright near-field object. We perform visibility phase corrections to restore coherence across the array for the near-field object (however not restoring coherence losses due to time and frequency averaging at the correlator). We illustrate the impact of the near-field corrections in the aperture plane and the sky plane. The aperture plane curves to match the curvature of the near-field wavefront, and in the sky plane near-field corrections manifest as fringe rotations at different rates as we bring the focal point of the array from infinity to the desired near-field distance. We also demonstrate the inverse scenario of inferring the line-of-sight range of the ISS by inverting the apparent curvature of the wavefront seen by the aperture. We conclude the paper by briefly discussing the limitations of the methods developed and the near-field science cases where our approach can be exploited.

In Paper I, we presented an overview of the Southern-sky MWA Rapid Two-metre (SMART) survey, including the survey design and search pipeline. While the combination of MWA’s large field-of-view and the voltage capture system brings a survey speed of ${\sim} 450\, {\textrm{deg}}^{2}\,\textrm{h}^{-1}$, the progression of the survey relies on the availability of compact configuration of the Phase II array. Over the past few years, by taking advantage of multiple windows of opportunity when the compact configuration was available, we have advanced the survey to 75% of the planned sky coverage. To date, about 10% of the data collected thus far have been processed for a first-pass search, where 10 min of observation is processed for dispersion measures out to 250 ${\textrm{pc cm}}^{-3}$, to realise a shallow survey that is largely sensitive to long-period pulsars. The ongoing analysis has led to two new pulsar discoveries, as well as an independent discovery and a rediscovery of a previously incorrectly characterised pulsar, all from ${\sim} 3\% $ of the data for which candidate scrutiny is completed. In this sequel to Paper I, we describe the strategies for further detailed follow-up including improved sky localisation and convergence to timing solution, and illustrate them using example pulsar discoveries. The processing has also led to re-detection of 120 pulsars in the SMART observing band, bringing the total number of pulsars detected to date with the MWA to 180, and these are used to assess the search sensitivity of current processing pipelines. The planned second-pass (deep survey) processing is expected to yield a three-fold increase in sensitivity for long-period pulsars, and a substantial improvement to millisecond pulsars by adopting optimal de-dispersion plans. The SMART survey will complement the highly successful Parkes High Time Resolution Universe survey at 1.2–1.5 GHz, and inform future large survey efforts such as those planned with the low-frequency Square Kilometre Array (SKA-Low).

We present an overview of the Southern-sky MWA Rapid Two-metre (SMART) pulsar survey that exploits the Murchison Widefield Array’s large field of view and voltage-capture system to survey the sky south of 30$^{\circ}$ in declination for pulsars and fast transients in the 140–170 MHz band. The survey is enabled by the advent of the Phase II MWA’s compact configuration, which offers an enormous efficiency in beam-forming and processing costs, thereby making an all-sky survey of this magnitude tractable with the MWA. Even with the long dwell times employed for the survey (4800 s), data collection can be completed in $<$100 h of telescope time, while still retaining the ability to reach a limiting sensitivity of $\sim$2–3 mJy (at 150 MHz, near zenith), which is effectively 3–5 times deeper than the previous-generation low-frequency southern-sky pulsar survey, completed in the 1990s. Each observation is processed to generate $\sim$5000–8000 tied-array beams that tessellate the full $\sim 610\, {\textrm{deg}^{2}}$ field of view (at 155 MHz), which are then processed to search for pulsars. The voltage-capture recording of the survey also allows a multitude of post hoc processing options including the reprocessing of data for higher time resolution and even exploring image-based techniques for pulsar candidate identification. Due to the substantial computational cost in pulsar searches at low frequencies, the survey data processing is undertaken in multiple passes: in the first pass, a shallow survey is performed, where 10 min of each observation is processed, reaching about one-third of the full-search sensitivity. Here we present the system overview including details of ongoing processing and initial results. Further details including first pulsar discoveries and a census of low-frequency detections are presented in a companion paper. Future plans include deeper searches to reach the full sensitivity and acceleration searches to target binary and millisecond pulsars. Our simulation analysis forecasts $\sim$300 new pulsars upon the completion of full processing. The SMART survey will also generate a complete digital record of the low-frequency sky, which will serve as a valuable reference for future pulsar searches planned with the low-frequency Square Kilometre Array.

HINOTORI (Hybrid Integration Project in Nobeyama, Triple-band Oriented) has constructed a higher sensitivity 22/43 GHz and a 22/43/86 GHz simultaneous observation systems in the Nobeyama 45-m telescope by introducing new frequency separation filters in the telescope’s quasi-optics. The performance of the observation systems, such as the beam squint, the aperture efficiency, the system noise temperature when inserting the filters, and the phase stability of the signal path have been evaluated. It is indicated that the established systems have sufficient performance for single-dish and VLBI observations. The single-dish observation demonstrations using the triple-band system were successfully conducted in acquiring scientific data including multiple maser lines.

This is a multi-wavelength study to examine the G45.804-0.355 massive star-forming region (SFR) and its environs. Using MeerKAT with angular resolution (θ) of 8″ at 1.28 GHz, we identify for the first time, a faint radio continuum emission core in G45.804-0.355. At 1.3 mm, ALMA observations (θ∼0″ 7) resolved the core into multiple dust continuum condensations including MM1 which was found to be the primary massive dust dense core in the region (mass Mc∼ 54.3M⊙). The dust continuum shows an arm-like extended emission within which other dense cores are situated. The velocity gradient of the MM1 core indicates that the source is associated with a rotation gas motion. The red- and blue-shifted lobes overlap at the position of MM1. The compact morphology of the 4.5 μm IR emission, the presence of spiral arms and overlapping of the red- and blue-shifted lobes suggest a face-on geometry of G45.80-40.355.

We present the first observational study of pulsars performed with the second-generation precursor stations to the low-frequency component of the Square Kilometre Array (SKA-Low): the Aperture Array Verification System 2 (AAVS2) and the Engineering Development Array 2 (EDA2). Using the SKA-Low stations, we have observed 100 southern-sky pulsars between 70–350 MHz, including follow-up observations at multiple frequencies for a selected sample of bright pulsars. These observations have yielded detections of 22 pulsars, including the lowest-frequency detections ever published for 6 pulsars, despite the modest sensitivity of initial system where the recording bandwidth is limited to ${\sim}{1}\,\mathrm{MHz}$ . By comparing simultaneous flux density measurements obtained with the SKA-Low stations and performing rigorous electromagnetic simulations, we verify the accuracy of the SKA-Low sensitivity simulation code presented in Sokolowski (2022, PASA, 39, e015). Furthermore, we perform model fits to the radio spectra of the detected pulsars using the method developed by Jankowski (2018, MNRAS, 473, 4436), including nine pulsars which were not fitted in the original work. We robustly classify the spectra into five morphological classes and find that all but one pulsar exhibit deviations from simple power-law behaviour. These findings suggest that pulsars with well-determined spectra are more likely to show spectral flattening or turnover than average. Our work demonstrates how SKA-Low stations can be meaningfully used for scientifically useful measurements and analysis of pulsar radio spectra, which are important inputs for informing pulsar surveys and science planned with the SKA-Low.

The signatures of small-scale features in the solar atmosphere are severely degraded by limited angular resolution of the observations. The Deep Solar ALMA Neural Network Estimator (Deep-SANNE) is trained towards synthetic observables from 3D magnetohydrodynamic simulations to recognize the small-scale dynamic features in data at limited observational resolution, and provide maps of correction factors across the field of view. The correction factors can be used to acquire deconvolved refined images with significantly improved brightness temperature contrasts, where the strength of brightening events are reproduced to an accuracy of 94.0% instead of the 43.7% at observational resolution. Deep-SANNE can also provide masks of the most probable locations with large accuracies, and estimations on the radiation formation heights in connection to the small-scale features. The Deep-SANNE refined images and estimations of radiation formation heights allow for larger accuracy and meaningful analysis of solar ALMA data.

Solar observations with the Atacama Large Millimeter-Submillimeter Array (ALMA) became available to the community in late-2016. For the first time, high angular resolution (sub-arcsec) and high-time-resolution (1 s) observations of the Sun became possible at millimeter wavelengths, providing observations of the solar chromosphere that are uniquely complementary to those in O/IR and UV wavelengths. Here, an overview of current ALMA capabilities is provided, selected recent results of ALMA observations of the Sun are highlighted, and future capabilities are outlined.

The Murchison Widefield Array (MWA) is a low-frequency aperture array capable of high-time and frequency resolution astronomy applications such as pulsar studies. The large field-of-view of the MWA (hundreds of square degrees) can also be exploited to attain fast survey speeds for all-sky pulsar search applications, but to maximise sensitivity requires forming thousands of tied-array beams from each voltage-capture observation. The necessity of using calibration solutions that are separated from the target observation both temporally and spatially makes pulsar observations vulnerable to uncorrected, frequency-dependent positional offsets due to the ionosphere. These offsets may be large enough to move the source away from the centre of the tied-array beam, incurring sensitivity drops of ${\sim}30{-}50\%$ in Phase II extended array configuration. We analyse these offsets in pulsar observations and develop a method for mitigating them, improving both the source position accuracy and the sensitivity. This analysis prompted the development of a multi-pixel beamforming functionality that can generate dozens of tied-array beams simultaneously, which runs a factor of ten times faster compared to the original single-pixel version. This enhancement makes it feasible to observe multiple pulsars within the vast field of view of the MWA and supports the ongoing large-scale pulsar survey efforts with the MWA. We explore the extent to which ionospheric offset correction will be necessary for the MWA Phase III and the low-frequency square kilometre array (SKA-low).

The Intensity Interferometry technique consists of measuring the spatial coherence (visibility) of an object via its intensity fluctuations over a sufficient range of telescope separations (baselines). This allows us to study the size, shape and morphology of stars with an unprecedented resolution. Cherenkov telescopes have a set of characteristics that coincidentally allow for Intensity Interferometry observations: very large reflective surfaces, sensitivity to individual photons, temporal resolution of nanoseconds and the fact that they come in groups of several telescopes. In the recent years, the MAGIC Collaboration has developed a deadtime-free Intensity Interferometry setup for its two 17 m diameter Cherenkov telescopes that includes a 4-channel GPU-based real-time correlator, 410–430 nm filters and new ways of splitting its primary mirrors into submirrors using Active Mirror Control (AMC). With this setup, MAGIC can operate as a long-baseline optical interferometer in the baseline range 40–90 m, which translates into angular resolutions of 0.5-1 mas. Additionally, thanks to its AMC, it can simultaneously measure the zero-baseline correlation or, by splitting into submirrors, access shorter baselines under 17 m in multiple u-v plane orientations. The best candidates to observe with this technique are relatively small and bright stars, in other words, massive stars (O, B and A types). We will present the science cases that are currently being proposed for this setup, as well as the prospects for the future of the system and technique, like the possibility of large-scale implementation with CTA.

Global 21-cm experiments require exquisitely precise calibration of the measurement systems in order to separate the weak 21-cm signal from Galactic and extragalactic foregrounds as well as instrumental systematics. Hitherto, experiments aiming to make this measurement have concentrated on measuring this signal using the single element approach. However, an alternative approach based on interferometers with short baselines is expected to alleviate some of the difficulties associated with a single element approach such as precision modelling of the receiver noise spectrum. Short spacing Interferometer Telescope probing cosmic dAwn and epoch of ReionisAtion (SITARA) is a short spacing interferometer deployed at the Murchison Radio-astronomy Observatory (MRO). It is intended to be a prototype or a test-bed to gain a better understanding of interferometry at short baselines, and develop tools to perform observations and data calibration. In this paper, we provide a description of the SITARA system and its deployment at the MRO, and discuss strategies developed to calibrate SITARA. We touch upon certain systematics seen in SITARA data and their modelling. We find that SITARA has sensitivity to all sky signals as well as non-negligible noise coupling between the antennas. It is seen that the coupled receiver noise has a spectral shape that broadly matches the theoretical calculations reported in prior works. We also find that when appropriately modified antenna radiation patterns taking into account the effects of mutual coupling are used, the measured data are well modelled by the standard visibility equation.

The Square Kilometre Array (SKA) will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency band from 50 MHz to 15.3 GHz. The SKA’s low frequency component (SKA-Low), which will observe in the 50–350 MHz band, will be built at the Murchison Radio-astronomy Observatory (MRO) in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally formed station beam and the local sidereal time (LST), and is different for the two orthogonal polarisations of the antennas. The accurate prediction of the SKA-Low sensitivity in an arbitrary direction in the sky is crucial for future observation planning. Here, we present a sensitivity calculator for the SKA-Low radio telescope, using a database of pre-computed sensitivity values for two realisations of an SKA-Low station architecture. One realisation uses the log-periodic antennas selected for SKA-Low. The second uses a known benchmark, in the form of the bowtie dipoles of the Murchison Widefield Array. Prototype stations of both types were deployed at the MRO in 2019, and since then have been collecting commissioning and verification data. These data were used to measure the sensitivity of the stations at several frequencies and over at least 24 h intervals, and were compared to the predictions described in this paper. The sensitivity values stored in the SQLite database were pre-computed for the X, Y, and Stokes I polarisations in 10 MHz frequency steps, $\scriptsize{1/2}$ hour LST intervals, and $5^\circ$ resolution in pointing directions. The database allows users to quickly and easily estimate the sensitivity of SKA-Low for arbitrary observing parameters (your favourite object) using interactive web-based or command line interfaces. The sensitivity can be calculated using publicly available web interface (http://sensitivity.skalow.link) or a command line python package (https://github.com/marcinsokolowski/station_beam), which can also be used to calculate the sensitivity for arbitrary pointing directions, frequencies, and times without interpolations.

At relatively high frequencies, highly sensitive grating sidelobes occur in the primary beam patterns of low frequency aperture arrays (LFAA) such as the Murchison Widefield Array (MWA). This occurs when the observing wavelength becomes comparable to the dipole separation for LFAA tiles, which for the MWA occurs at ${\sim}300$ MHz. The presence of these grating sidelobes has made calibration and image processing for 300 MHz MWA observations difficult. This work presents a new calibration and imaging strategy which employs existing techniques to process two example 300 MHz MWA observations. Observations are initially calibrated using a new 300 MHz sky-model which has been interpolated from low frequency and high frequency all-sky surveys. Using this 300 MHz model in conjunction with the accurate MWA tile primary beam model, we perform sky-model calibration for the two example observations. After initial calibration a self-calibration loop is performed by all-sky imaging each observation. We mask the main lobe of the all-sky image, and perform a sky-subtraction by estimating the masked image visibilities. We then image the main lobe of the sky-subtracted visibilities, which results in high dynamic range images of the two example observations. These images have been convolved with a Gaussian to a resolution of $2.4$ arcminutes, with a maximum sensitivity of ${{\sim}}31\,\textrm{mJy/beam}$ . The calibration and imaging strategy demonstrated in this work opens the door to performing science at 300 MHz with the MWA, which was previously an inaccessible domain. With this paper we release the code described below and the cross-matched catalogue along with the code to produce a sky-model in the range 70–1 400 MHz.

The Epoch of Reionisation (EoR) is the period within which the neutral universe transitioned to an ionised one. This period remains unobserved using low-frequency radio interferometers, which target the 21 cm signal of neutral hydrogen emitted in this era. The Murchison Widefield Array (MWA) radio telescope was built with the detection of this signal as one of its major science goals. One of the most significant challenges towards a successful detection is that of calibration, especially in the presence of the Earth’s ionosphere. By introducing refractive source shifts, distorting source shapes, and scintillating flux densities, the ionosphere is a major nuisance in low-frequency radio astronomy. We introduce sivio, a software tool developed for simulating observations of the MWA through different ionospheric conditions, which is estimated using thin screen approximation models and propagated into the visibilities. This enables us to directly assess the impact of the ionosphere on observed EoR data and the resulting power spectra. We show that the simulated data captures the dispersive behaviour of ionospheric effects. We show that the spatial structure of the simulated ionospheric media is accurately reconstructed either from the resultant source positional offsets or from parameters evaluated during the data calibration procedure. In turn, this will inform on the best strategies of identifying and efficiently eliminating ionospheric contamination in EoR data moving into the Square Kilometre Array era.

We present the first Southern-Hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array (SKA-Low). Since its deployment, the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It uses a difference imaging technique to enable identification of a wide variety of transient classes, ranging from human-made radio-frequency interference to genuine astrophysical events. Observations at the frequency 159.375 MHz and higher in a single coarse channel ( $\approx$ 0.926 MHz) were made with 2 s time resolution, and multiple nights were analysed generating thousands of images. Despite having modest sensitivity ( $\sim$ few Jy beam–1), using a single coarse channel and 2-s imaging, the system was able to detect multiple bright transients from PSR B0950+08, proving that it can be used to detect bright transients of an astrophysical origin. The unusual, extreme activity of the pulsar PSR B0950+08 (maximum flux density $\sim$ 155 Jy beam–1) was initially detected in a ‘blind’ search in the 2020 April 10/11 data and later assigned to this specific pulsar. The limitations of our data, however, prevent us from making firm conclusions of the effect being due to a combination of refractive and diffractive scintillation or intrinsic emission mechanisms. The system can routinely collect data over many days without interruptions; the large amount of recorded data at 159.375 and 229.6875 MHz allowed us to determine a preliminary transient surface density upper limit of $1.32 \times 10^{-9} \text{deg}^{-2}$ for a timescale and limiting flux density of 2 s and 42 Jy, respectively. In the future, we plan to extend the observing bandwidth to tens of MHz and improve time resolution to tens of milliseconds in order to increase the sensitivity and enable detections of fast radio bursts below 300 MHz.

We report on the detection of source noise in the time domain at 162 MHz with the Murchison Widefield Array. During the observation, the flux of our target source Virgo A (M87) contributes only $\sim$1% to the total power detected by any single antenna; thus, this source noise detection is made in an intermediate regime, where the source flux detected by the entire array is comparable with the noise from a single antenna. The magnitude of source noise detected is precisely in line with predictions. We consider the implications of source noise in this moderately strong regime on observations with current and future instruments.

We have extended our previous work to use the Murchison widefield array (MWA) as a non-coherent passive radar system in the FM frequency band, using terrestrial FM transmitters to illuminate objects in low Earth orbit (LEO) and the MWA as the sensitive receiving element for the radar return. We have implemented a blind detection algorithm that searches for these reflected signals in difference images constructed using standard interferometric imaging techniques. From a large-scale survey using 20 h of archived MWA observations, we detect 74 unique objects over multiple passes, demonstrating the MWA to be a valuable addition to the global Space Domain Awareness network. We detected objects with ranges up to 977 km and as small as $0.03$${\rm m}^2$ radar cross section. We found that 30 objects were either non-operational satellites or upper-stage rocket body debris. Additionally, we also detected FM reflections from Geminid meteors and aircraft flying over the MWA. Most of the detections of objects in LEO were found to lie within the parameter space predicted by previous feasibility studies, verifying the performance of the MWA for this application. We have also used our survey to characterise these reflected signals from LEO objects as a source of radio frequency interference (RFI) that corrupts astronomical observations. This has allowed us to undertake an initial analysis of the impact of this RFI on the MWA and the future square kilometer array (SKA). As part of this analysis, we show that the standard MWA RFI flagging strategy misses most of this RFI and that this should be a careful consideration for the SKA.

Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2–4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a Neutron Star Extreme Matter Observatory (NEMO): a gravitational-wave interferometer optimised to study nuclear physics with merging neutron stars. The concept uses high-circulating laser power, quantum squeezing, and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above 1 kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year and potentially allow for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica.