High-quality diets have been found to be beneficial in preventing long-term weight gain. However, concurrent changes in diet quality and body weight over time have rarely been reported. We examined the association between 10-year changes in diet quality and body weight in the Multiethnic Cohort Study. Analyses included 53 977 African Americans, Native Hawaiians, Japanese Americans, Latinos and Whites, who completed both baseline (1993–1996, 45–69 years) and 10-year follow-up (2003–2008) surveys including a FFQ and had no history of heart disease or cancer. Using multivariable regression, weight changes were regressed on changes in four diet quality indexes, Healthy Eating Index-2015, Alternative Healthy Eating Index-2010, alternate Mediterranean Diet and Dietary Approaches to Stop Hypertension scores. Mean weight change over 10 years was 1·2 (sd 6·8) kg in men and 1·5 (sd 7·2) kg in women. Compared with stable diet quality (< 0·5 sd change), the greatest increase (≥ 1 sd increase) in the diet scores was associated with less weight gain (by 0·55–1·17 kg in men and 0·62–1·31 kg in women). Smaller weight gain with improvement in diet quality was found in most subgroups by race/ethnicity, baseline age and baseline BMI. The inverse association was stronger in younger age and higher BMI groups. Ten-year improvement in diet quality was associated with a smaller weight gain, which varied by race/ethnicity and baseline age and BMI. Our findings suggest that maintaining a high-quality diet and improving diet quality over time may prevent excessive weight gain.

A triazine-based graphite carbon nitride (tri-C3N4) was successfully prepared using a solid and mild method, and modified through concentrated acid and the hydrothermal method. Interestingly, the modified tri-C3N4 (tri-HC3N4) showed good water stability and excellent fluorescence property. Meanwhile, tri-HC3N4 was successfully used to construct a high-sensitive and selective fluorescence sensor to Ag+. The as-prepared fluorescence sensor showed a fast response and a low detection limit as 0.4046 μM. Moreover, the possible quenching mechanisms were discussed based on the photoinduced electron transfer and the formation of new complex between tri-HC3N4 and Ag+ with the help of the related characterizations. This study does not only provide a new tri-HC3N4 for a high efficiency fluorescence sensor, but also show the potential application in biological sciences.

Nearly 80% of new cases of myopia arise between 9 and 13 years old when puberty development also progresses rapidly. However, little is known about the association between myopia and puberty. We aim to evaluate the association between myopia and menarche, the most important puberty indicator for girls, and to test whether menarche could modify the effects of myopia-related behaviors. The participants came from two consecutive national surveys conducted in 30 provinces in mainland China in 2010 and 2014. We included 102,883 girls (61% had experienced menarche) aged 10–15 years. Risk behaviors for myopia which included sleep duration, homework time, and outdoor activity were measured by self-administrated questionnaire. Myopia was defined according to a validated method, and its relationships with menarche status and behaviors were evaluated by robust Poisson regression models based on generalized estimated equation adjusting for cluster effect of school. We found that postmenarche girls were at 13% (95% confidence interval: 11%–16%) higher risk of myopia than premenarche girls, after adjusting for exact age, urban–rural location, survey year, and four behavioral covariates. Short sleep duration (<7 h/d), long homework time (>1 h/d) and low frequency of weekend outdoor activity tended to be stronger (with higher prevalence ratios associated with myopia) risk factors for myopia in postmenarche girls than in premenarche girls, and their interaction with menarche status was all statistically significant (P < 0.05). Overall, our study suggests that menarche onset may be associated with increased risk of myopia among school-aged girls and could also enhance girls’ sensitivity to myopia-related risk behaviors.

This article presents a brief review of our case studies of data-driven Integrated Computational Materials Engineering (ICME) for intelligently discovering advanced structural metal materials, including light-weight materials (Ti, Mg, and Al alloys), refractory high-entropy alloys, and superalloys. The basic bonding in terms of topology and electronic structures is recommended to be considered as the building blocks/units constructing the microstructures of advanced materials. It is highlighted that the bonding charge density could not only provide an atomic and electronic insight into the physical nature of chemical bond of materials but also reveal the fundamental strengthening/embrittlement mechanisms and the local phase transformations of planar defects, paving a path in accelerating the development of advanced metal materials via interfacial engineering. Perspectives on the knowledge-based modeling/simulations, machine-learning knowledge base, platform, and next-generation workforce for sustainable ecosystem of ICME are highlighted, thus to call for more duty on the developments of advanced structural metal materials and enhancement of research productivity and collaboration.

Transmission of varicella occurs frequently in schools and households. We investigated the characteristics of varicella cases derived from within-household transmission and the modes of varicella transmission between school and household settings in Shanghai, China, from 2009 to 2018. Within-household transmission occurred in 278 households, of which 134 transmission events were between children. Sixty-one household varicella transmission events may be attributed to isolation procedures for infected students during school outbreaks, and 7.6% of school outbreaks were caused by schoolchildren cases derived from within-household transmission. The frequency of ‘school-household-school’ transmission adds an additional layer of complexity to the control of school varicella outbreaks. Administration of varicella vaccine as post-exposure prophylaxis after exposure is considered to be an effective measure to control varicella spread within households and schools.

Dalian, China, is a city free of rabies in recent 20 years, but the annual cost for rabies vaccination still brings an economic burden on society and individuals. We did a retrospective descriptive analysis to analyse the reason for this and try to find some ways to resolve it. A total of 10 028 post-exposure prophylaxis (PEP) cases were recorded from January 2016 to December 2017. According to the exposure grades, 32 cases were grade I; 7712 cases were grade II; 2284 cases were grade III. All the patients in the cases were injured by pet dogs without abnormal clinical signs, and 80% of them were home pet dogs. Fifty-two per cent of the pet dogs were vaccinated. All the dogs survived during the PEP vaccination period. The data showed that a considerable proportion of people who did not have exposure risk for rabies had received vaccination. The underlying reasons included social, medical and personal factors. So here we proposed to replace the current ‘five-course’ intramuscular injection with intradermal injection method in the cities free of rabies in China, this can not only achieve effective vaccination but also save resources and eliminate the fear of rabies from victims. Meanwhile we should strengthen communication on rabies knowledge and make a routine evaluation of rabies surveillance system to improve understanding of the risk for rabies from biting animals.

An experiment was conducted to determine the effects of supplementing different amounts of daidzein in a diet on the growth performance, blood biochemical parameters and meat quality of finishing beef cattle. Thirty finishing Xianan steers were distributed in three groups equilibrated by weight and fed three different dietary treatments (concentrate ratio = 80%): (1) control; (2) 500 mg/kg daidzein and (3) 1000 mg/kg daidzein, respectively. Steers were slaughtered after an 80-day feeding trial. Results showed that daidzein supplementation had no effect on the final body weight, average daily gain and feed conversion rate of steers. Steers fed with 1000 mg/kg daidzein had greater dry matter intake than those fed with control diets. Compared with the control group, the 1000 mg/kg daidzein group had a higher fat thickness, lower shear force and lightness. The pH, drip loss, cooking loss, redness (a*), yellowness (b*), moisture, ash, crude protein and intramuscular fat of the Longissimus dorsi muscle were unaffected by daidzein supplementation. Compared with the control group, the 1000 mg/kg daidzein group significantly increased the serum concentrations of insulin, free fatty acid and Glutamic-pyruvic transaminase. The 500 mg/kg daidzein group significantly increased the serum concentration of tetraiodothyronine compared with the control group. Supplemental daidzein did not affect the blood antioxidant ability and blood immune parameters in serum. In conclusion, daidzein supplementation above 500 mg/day modifies feed intake and metabolic and hormonal profile, with positive and negative effects on meat quality.

Hepatitis B constitutes a severe public health challenge in China. The Community-based Collaborative Innovation hepatitis B (CCI-HBV) project is a national epidemiological study of hepatitis B and has been conducting a comprehensive intervention in southern Zhejiang since 2009.

The comprehensive intervention in CCI-HBV areas includes the dynamic hepatitis B screening in local residents, the normalised treatment for hepatitis B infections and the upcoming full-aged hepatitis B vaccination. After two rounds of screening (each round taking for 4 years), the initial epidemiological baseline of hepatitis B in Qinggang was obtained, a coastal community in east China. By combining key data and system dynamics modelling, the regional hepatitis B epidemic in 20 years was predicted.

There were 1041 HBsAg positive cases out of 12 228 people in Round 1 indicating HBV prevalence of 8.5%. Of the 13 146 people tested in Round 2, 1171 people were HBsAg positive, with a prevalence of 8.9%. By comparing the two rounds of screening, the HBV incidence rate of 0.192 per 100 person-years was observed. By consulting electronic medical records, the HBV onset rate of 0.533 per 100 person-years was obtained. We generated a simulated model to replicate the real-world situation for the next two decades. To evaluate the effect of interventions on regional HBV prevalence, three comparative experiments were conducted.

In this study, the regional hepatitis B epidemic in 20 years was predicted and compared with HBV prevalence under different interventions. Owing to the existing challenges in research methodology, this study combined HBV field research and simulation to provide a system dynamics model with close-to-real key data to improve prediction accuracy. The simulation also provided a prompt guidance for the field implementation.

The evolution of fatigue performance and surface mechanical properties of AISI 304 stainless steel induced by the electropulsing-assisted ultrasonic surface rolling process (EP-USRP) was systematically investigated by integrating instrumented indentation, scanning electron microscopy with electron backscatter diffraction, and transmission electron microscopy. The results indicate that higher hardness, greater strength, finer ultra-refined grains, and higher residual compressive stress are formed within the strengthened layer compared with the original ultrasonic surface rolling process (USRP). EP-USRP with the optimized experimental parameters can produce a higher average rotating bending fatigue strength for AISI 304 stainless steel than USRP. Anomalously and noteworthily, all fatigue specimens treated by EP-USRP showed an incomplete fracture, revealing a higher reservation of safety in practical engineering applications. The further modified structure strengthening and stress strengthening induced by EP-USRP are likely the primary intrinsic reasons for the observed phenomena. Furthermore, the influence mechanism of EP-USRP was discussed scrupulously.

The in vivo effects of administering free and microencapsulated Lactobacillus plantarum LIP-1 cells (2·0×109 colony-forming units/d) were evaluated in high-fat-diet-induced hyperlipidaemic rats. Results from real-time quantitative PCR targeting to LIP-1 cells showed a higher colon colonisation count of LIP-1 in the rats receiving microencapsulated cells compared with free cells (P<0·05). Moreover, the microencapsulated LIP-1 treatment resulted in a more obvious lipid-lowering effect (P<0·05). Meanwhile, their faecal samples had significantly less lipopolysaccharide-producing bacteria (especially Bilophila, Sutterella and Oscillibacter) and mucosa-damaging bacteria (Bilophila and Akkermansia muciniphila), whereas significantly more SCFA-producing bacteria (P<0·05) (namely Lactobacillus, Alloprevotella, Coprococcus, Eubacterium and Ruminococcus) and bacteria that potentially possessed bile salt hydrolase activity (Bacteroides, Clostridium, Eubacterium and Lactobacillus), and other beneficial bacteria (Alistipes and Turicibacter). Further, Spearman’s correlation analysis showed significant correlations between some of the modulated gut bacteria and the serum lipid levels. These results together confirm that microcapsulation enhanced the colon colonisation of LIP-1 cells, which subsequently exhibited more pronounced effects in improving the gut microbiota composition of hyperlipidaemic rats and lipid reduction.

A sediment core (14DH-C01) obtained from the mouth of Gomso Bay, on the west coast of South Korea, was used to obtain high-resolution palynomorph, grain-size, and 14C age data to investigate the Holocene sedimentary environment. The results indicated a transgressive depositional process with four stages controlled by sea-level change, as follows: river-dominated fluvial deposition from the early Holocene to 8.48 cal ka BP; tide-dominated tidal channel fill transgression from 8.48 to 8.08 cal ka BP; tide- to wave-dominated tidal channel fill transgression from 8.08 to 6.98 cal ka BP; and wave-dominated marine transgression from 6.98 cal ka BP to the present. Tidal channel filling was the primary mid-Holocene depositional process, accounting for the high sedimentation rate observed. The different hydrodynamics of the river-dominated, tide-dominated, tide- to wave-dominated, and wave-dominated processes following the changes in sea level may have controlled the transgressive depositional process. This transgressive sedimentary model differs from those of other large river mouth areas (e.g., the Changjiang River) since the mid-Holocene, perhaps resulting from the limited sediment supply in the study area.

Protected areas, including nature reserves and management areas, are established for the conservation of biological diversity and protection of the associated natural and cultural resources. These objectives, however, are often in conflict with socio-economic development. We investigated the plant communities dominated by the dove tree Davidia involucrata in a nature reserve on Mount Jinfo, China, where people intensively manage large areas of bamboo stands. We found a significant lack of small-sized main stems of D. involucrata (0–25 cm diameter at breast height; height > 1.3 m) and newly emerging sprouts in the reserve. The height-class distribution showed a unimodal pattern, with most individuals (of both D. involucrata and co-occurring species) concentrated in the 16–28 m height-class, and few individuals in the shrub and sub-canopy layer (1.3–8 m). Existing practices to facilitate the spread of bamboo stands, and the need to develop a local market for bamboo shoots received little consideration when the nature reserve was established in 1979 to protect D. involucrata. To conserve D. involucrata on Mount Jinfo the appropriate authorities and local parties involved in bamboo harvesting need to focus on methods that are favourable to the life history of this and other tree species, and strategies for their regeneration. These methods will also benefit the conservation of other highly valued trees that share similar life-history characteristics with D. involucrata.

We reconstructed the centennial climate changes for the period of 9–7 cal ka BP in the upper region of the Changjiang (Yangtze) River Delta plain. A general warming and wetting trend from 8560 to 7220 cal yr BP was indicated by the decrease in Quercus (deciduous) and increases in Quercus (evergreen), Pinus, and Polypodiaceae spores. However, there were several brief climate fluctuations. A notable palynological change, from regional assemblages dominated by arboreal pollen to local assemblages mainly consisting of nonarboreal pollen, reflects climate fluctuations. The key indices of Quercus (deciduous), Pinus, herbs, fern spores, and palynological concentrations showed similar signs of centennial climate fluctuations. We suggest that the climate changes of the Dongge Cave and Yangtze River Delta regions were mainly affected by the East Asian summer monsoon (EASM) during the period of 9–7 cal ka BP. The general warming trend may be associated with an intensified EASM, and solar activity may be one of the important factors driving the centennial climate changes. The ~8.2 ka event was also recorded in the Yangtze River Delta region, which suggests that there was a close relationship between the EASM and Greenland climate during the early Holocene.

Formation of the carbon nanotube (CNT) sock, which is an assemblage of nanotubes in a thin cylindrical shape, is a prerequisite for continuous production of thread and sheet using the floating catalyst growth method. Although several studies have considered sock formation mechanisms, the dynamics of the sock behavior during the synthesis process are not well understood. In this work, a computational technique is utilized to explore the multiphysics environment within the nanotube reactor affecting the sock formation and structure. Specifically the flow field, temperature profile, catalyst nucleation, and residence time are investigated and their influence on the sock formation and properties are studied. We demonstrate that it is critical to control the multiphysics synthesis environment in order to form a stable sock. Sock production rate was studied experimentally and found to be linearly dependent on the amount of effective catalyst (iron in the sock) inside the reactor. To achieve a high sock production rate, the proportion of effective iron has to be high when increasing the total amount of catalyst in the reactor. Based on the analysis, we suggest that using small size catalyst and growing longer CNTs by increasing temperature, increasing residence times etc. will increase the CNT production rate and improve the properties of CNT thread/sheet produced from the sock.