The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

Over the years, numerous observational studies have substantiated that various dietary choices have opposing effects on CVD. However, the causal effect has not yet been established. Thus, we conducted a Mendelian randomisation (MR) analysis to reveal the causal impact of dietary habits on CVD. Genetic variants strongly associated with 20 dietary habits were selected from publicly available genome-wide association studies conducted on the UK Biobank cohort (n 449 210). Summary-level data on CVD were obtained from different consortia (n 159 836–977 323). The inverse-variance weighted method (IVW) was the primary outcome, while MR-Egger, weighted median and MR Pleiotropy RESidual Sum and Outlier were used to assess heterogeneity and pleiotropy. We found compelling evidence of a protective causal effect of genetic predisposition towards cheese consumption on myocardial infarction (IVW OR = 0·67; 95 % CI = 0·544, 0·826; P = 1·784 × 10−4) and heart failure (IVW OR = 0·646; 95 % CI = 0·513, 0·814; P = 2·135 × 10−4). Poultry intake was found to be a detrimental factor for hypertension (IVW OR = 4·306; 95 % CI = 2·158, 8·589; P = 3·416 × 10−5), while dried fruit intake was protective against hypertension (IVW OR = 0·473; 95 % CI = 0·348, 0·642; P = 1·683 × 10−6). Importantly, no evidence of pleiotropy was detected. MR estimates provide robust evidence for a causal relationship between genetic predisposition to 20 dietary habits and CVD risk, suggesting that well-planned diets may help prevent and reduce the risk of CVD.

A new approach to target development for laboratory astrophysics experiments at high-power laser facilities is presented. With the dawn of high-power lasers, laboratory astrophysics has emerged as a field, bringing insight into physical processes in astrophysical objects, such as the formation of stars. An important factor for success in these experiments is targetry. To date, targets have mainly relied on expensive and challenging microfabrication methods. The design presented incorporates replaceable machined parts that assemble into a structure that defines the experimental geometry. This can make targets cheaper and faster to manufacture, while maintaining robustness and reproducibility. The platform is intended for experiments on plasma flows, but it is flexible and may be adapted to the constraints of other experimental setups. Examples of targets used in experimental campaigns are shown, including a design for insertion in a high magnetic field coil. Experimental results are included, demonstrating the performance of the targets.

Metabolically healthy obesity (MHO) might be an alternative valuable target in obesity treatment. We aimed to assess whether alternative Mediterranean (aMED) diet and Dietary Approaches to Stop Hypertension (DASH) diet were favourably associated with obesity and MHO phenotype in a Chinese multi-ethnic population. We conducted this cross-sectional analysis using the baseline data of the China Multi-Ethnic Cohort study that enrolled 99 556 participants from seven diverse ethnic groups. Participants with self-reported cardiometabolic diseases were excluded to eliminate possible reverse causality. Marginal structural logistic models were used to estimate the associations, with confounders determined by directed acyclic graph (DAG). Among 65 699 included participants, 11·2 % were with obesity. MHO phenotype was present in 5·7 % of total population and 52·7 % of population with obesity. Compared with the lowest quintile, the highest quintile of DASH diet score had 23 % decreased odds of obesity (OR = 0·77, 95 % CI 0·71, 0·83, P trend < 0·001) and 27 % increased odds of MHO (OR = 1·27, 95 % CI 1·10, 1·48, P trend = 0·001) in population with obesity. However, aMED diet showed no obvious favourable associations. Further adjusting for BMI did not change the associations between diet scores and MHO. Results were robust to various sensitivity analyses. In conclusion, DASH diet rather than aMED diet is associated with reduced risk of obesity and presents BMI-independent metabolic benefits in this large population-based study. Recommendation for adhering to DASH diet may benefit the prevention of obesity and related metabolic disorders in Chinese population.

The joint effects of stimulus quality and semantic context in visual word recognition were examined with event-related potential (ERP) recordings. In one-character Chinese word recognition, we manipulated stimulus quality at two degradation levels (highly vs. slightly degraded) and semantic context at two priming levels (semantically related vs. unrelated). In a prime–target–probe trial flow, ERPs were recorded to the target character which was presented in either high or slight degradation and which was preceded by either a semantically related or unrelated prime character. The target character was then followed by a probe character which was either identical to or different from the target character. Subjects were instructed to make target–probe matching judgments. The ERP results demonstrated a degradation by priming interaction, with larger N400 semantic priming effects for slightly degraded targets. Moreover, the degradation effects were observed on the P200, N250, and N400. These findings provided evidence for the cascaded model of visual word recognition such that the visual processing cascaded into the semantic stage and thus interacted on the N400 amplitude. The results were compared to an earlier study with a null ERP degradation by priming interaction. The ramifications of these results for models of visual word recognition are discussed.

Different from developed countries, there is a paucity of research examining how the Dietary Approaches to Stop Hypertension (DASH) and Mediterranean diets relate to lipids in less-developed ethnic minority regions (LEMR). A total of 83 081 participants from seven ethnic groups were retrieved from the baseline data of the China Multi-Ethnic Cohort study, which was conducted in less-developed Southwest China between May 2018 and September 2019. Multivariable linear regression models were then used to examine the associations of the DASH and alternative Mediterranean diet (AMED) scores, assessed by modified DASH score and AMED, as well as their components with total cholesterol (TC), LDL-cholesterol, HDL-cholesterol, TAG and TC/HDL-cholesterol. The DASH scores were negatively associated with TC, HDL-cholesterol and TAG. Comparing the highest quintiles with the lowest DASH scores, TC decreased 0·0708 (95 % CI −0·0923, −0·0493) mmol/l, HDL-cholesterol decreased 0·0380 (95 % CI −0·0462, −0·0299) mmol/l and TAG decreased 0·0668 (95 % CI −0·0994, −0·0341) mmol/l. The AMED scores were negatively associated with TC, LDL-cholesterol and HDL-cholesterol. Comparing the highest quintiles with the lowest AMED scores, TC decreased 0·0816 (95 % CI −0·1035, −0·0597) mmol/l, LDL-cholesterol decreased 0·0297 (95 % CI −0·0477, −0·0118) mmol/l and HDL-cholesterol decreased 0·0275 (95 % CI −0·0358, −0·0192) mmol/l. Although both the DASH diet and the Mediterranean diet were negatively associated with blood lipids, those associations showed different patterns in LEMR, particularly for TAG and HDL-cholesterol.

Parakmeria omeiensis is a Critically Endangered tree species in the family Magnoliaceae, endemic to south-west China. The tree is functionally dioecious, but little is known about the species’ status in the wild. We investigated the range, population size, age structure, habitat characteristics and threats to P. omeiensis. We located a total of 74 individuals in two populations on the steep slopes of Mount Emei, Sichuan province, growing under the canopy of evergreen broadleaved forest in well-drained gravel soil. A male-biased sex ratio, lack of effective pollinating insects, and habitat destruction result in low seed set and poor seedling survival in the wild. We have adopted an integrated conservation approach, including strengthening in situ conservation, cultivation of saplings, ex situ conservation and reintroduction, to protect this species. The successful conservation of P. omeiensis has important implications for the conservation of the genus Parakmeria and the family Magnoliaceae.

In recent years, outbreaks of hand–foot–mouth disease (HFMD) in China, Singapore and other Western Pacific Region, involving millions of children, have become a big threat to public health. This study aimed to quantitatively assess all qualified studies and identify the risk factors for HFMD death. A systematic search of the databases PubMed, Medline, Embase and the Cochrane Library was performed. Study heterogeneity and publication bias were estimated. Seven case–control studies involving 1641 participants (634 died and 1007 survived) were included in the meta-analysis. Human enterovirus 71 infection, male, age ⩽3 years, vomiting, cyanosis, convulsion, duration of fever ⩾3 days, atypical rashes and abdominal distention were not significantly related to HFMD death (P ⩽ 0.05). Lethargy (odds ratio (OR) = 6.62; 95% CI 3.61–12.14; I2 = 0%; P < 0.0001), pneumonoedema/pneumorrhagia (OR = 4.09; 95% CI 2.44–6.87; I2 = 0%; P < 0.0001), seizures (OR = 6.85; 95% CI 2.37–19.74; I2 = 0%; P = 0.0004), dyspnoea (OR = 8.24; 95% CI 2.05–33.19; I2 = 83%; P = 0.003) and coma (OR = 3.76; 95% CI 1.85–7.67; I2 = 0%; P = 0.0003) were significantly associated with HFMD death, which were risk factors for HFMD death.

Magnetic iron oxide nanoparticles (MIONPs) are particularly attractive in biosensor, antibacterial activity, targeted drug delivery, cell separation, magnetic resonance imaging tumor magnetic hyperthermia, and so on because of their particular properties including superparamagnetic behavior, low toxicity, biocompatibility, etc. Although many methods had been developed to produce MIONPs, some challenges such as severe agglomeration, serious oxidation, and irregular size are still faced in the synthesis of MIONPs. Thus, various strategies had been developed for the surface modification of MIONPs to improve the characteristics of them and obtain multifunctional MIONPs, which will widen the applicational scopes of them. Therefore, the processes, mechanisms, advances, advantages, and disadvantages of six main approaches for the synthesis of MIONPs; surface modification of MIONPs with inorganic materials, organic molecules, and polymer molecules; applications of MIONPs or modified MIONPs; the technical challenges of synthesizing MIONPs; and their limitations in biomedical applications were described in this review to provide the theoretical and technological guidance for their future applications.

AZ31 magnesium alloy sheets were A-TIG-welded through a coating of flux, which contained different ratios of Ce powder and nano-sized SiC as reinforcement particles and equal mass of TiO2 as activating fluxes. The microscopic analysis results illustrated that relatively low content of Ce in the reinforcement particles caused the formation of Al3Ce precipitates and refined the grains of α-Mg phase together with β-Mg17Al12 and SiC particles. The increase in microhardness and ultimate tensile strength of the joints was 6.2% and 19.2%, respectively, when reinforcement particles contain 20 wt% Ce compared to the joints coated without Ce. By studying the electrochemical test results, when using 20 wt% Ce + 80 wt% SiC as reinforcement particles, the corrosion current density was the lowest and the corrosion resistance reached the largest value, reflecting the improvement of corrosion property of the joint affected by Ce element.

The dwarfing wheat (Triticum aestivum L.) breeding has promoted a dramatic increase in yields. Since the utilized dwarfing genes in wheat are very limited, identification of novel dwarfing genes is necessary for improving the genetic diversity of wheat. In this study, more than 300 dwarfing wheat lines from induced mutation were screened by kompetitive allele-specific PCR and gibberellin (GA) treatment. The 17.49% of Rht-D1b and 1.37% of Rht-B1b dwarfing mutants were identified in this mutant group. Additionally, Rht-D1b mutants showed more effective in reduction of plant height and higher 1000-grain weight comparing with that of Rht-B1b mutants. By combing with comparison of yield components and expression profile of GA biosynthetic genes with wild-type, the GA-responsive mutant dm15 without directly involvement in GA metabolism, significantly increased 1000-grain weight but no change of other yield components in two locations of field experiments. Meanwhile, another elite mutant dm11 with change of GA biosynthetic genes expression was also identified. These mutants will be promising candidates for dwarfing wheat breeding.

The differential quadrature method has been widely used in scientific and engineering computation. However, for the basic characteristics of time domain differential quadrature method, such as numerical stability and calculation accuracy or order, it is still lack of systematic analysis conclusions. In this paper, according to the principle of differential quadrature method, it has been derived and proved that the weighting coefficients matrix of differential quadrature method meets the important V-transformation feature. Through the equivalence of the differential quadrature method and the implicit Runge-Kutta method, it has been proved that the differential quadrature method is A-stable and s-stage s-order method. On this basis, in order to further improve the accuracy of the time domain differential quadrature method, a class of improved differential quadrature method of s-stage 2s-order has been proposed by using undetermined coefficients method and Padé approximations. The numerical results show that the proposed differential quadrature method is more precise than the traditional differential quadrature method.

Poly(L-lactide)/poly(para-dioxanone) (PLLA/PPDO) (85/15 w/w) blends with 0, 1, 3, and 5 wt% poly(para-dioxanone-co-L-lactide) (PDOLLA) as a compatibilizer were prepared by solution coprecipitation. The in vitro hydrolytic degradation (HD) of blend bars with different contents of PDOLLA was studied by immersing the bars in a phosphate buffer solution (PBS) at pH 7.49. To estimate the degradation of blend bars, the weight loss, water absorption, thermal properties, surface morphology, and mechanical properties of blend bars, as well as the pH value changes of the PBS, were studied for 8 wk of HD. By adding 1 and 3 wt% PDOLLA, the weight loss of PLLA/PPDO (85/15 w/w) blends increased from 6.4 to 6.8 and 7.4% after 8 wk of HD, 6.2 and 15.6% increment, respectively, while, the average tensile strength of PLLA/PPDO (85/15 w/w) blends for 2–8 wk of HD increased from 25.8 to 29.0 MPa and 31.0 MPa, 12.4 and 20.2% increment, respectively. Considering their good mechanical properties and HD rate, the PLLA/PPDO (85/15 w/w) blends with 1 and 3 wt% PDOLLA are potential to be used as a medical implant material.

Rapid growth of single-layer graphene using laser-induced chemical vapor deposition (LCVD) with a visible CW laser (λ = 532 nm) irradiation at room temperature was investigated. In this study, an optically-pumped solid-state laser with a wavelength of 532 nm irradiates a thin nickel foil to induce a local temperature rise, thereby allowing the direct writing of graphene patterns about ~10 μm in width with high growth rate on precisely controlled positions. It is demonstrated that the fabrication of graphene patterns can be achieved with a single scan for each graphene pattern using LCVD with no annealing or preprocessing of the substrate. The scan speed reaches to about ~50 um/s, which indicates that the graphene pattern with 1:1 aspect ratio (x:y) can be grown in 0.2 sec. The patterned graphene on nickel was transferred to SiO2/Si substrate for fabrication of electrical circuits and sensor devices.

We report recent progress in 2G-HTS wire technology at Superpower Inc. The throughputs of 4mm-wide tape have reached 750m/h for sputtering AlO3+Y2O3 base layer, 360m/h for IBAD MgO template, 345m/h for sputtering Homo-epi MgO+LMO buffer, 180m/h for MOCVD REBCO. Critical current (Ic) of 813A/cm-width at 77K and self-field has been achieved on 1 meter length of 12mm-wide tape in which the thickness of GdYBCO film is 3.3 microns. Ic in a magnetic field has been significantly improved through composition modification, doping and MOCVD condition optimization. Ic of 185.6A/cm-width at 77K and 1Tesla has been obtained. For Ic on long lengths, 314A/cm-width on 202m, 221A/cm-width on 610m and 170A/cm-width on 935m have been achieved. A coil of 19.1mm diameter we made with our 2G wires generated 26.8T magnetic field in the magnet. A 30m-long cable made with nearly 10,000 meters of Superpower 2G wires showed excellent overall performance and has been installed and energized in the power grid.

Co-based brazing alloy CoFeNi(Si, B)CrTi was designed for SiC joining. The periodic banded reaction structure that existed at the interface between SiC and the traditional Ni-based or Co-based braze has been eliminated by the new brazing alloy. The maximum room-temperature four-point bend strength of 161 MPa was achieved for SiC/SiC joint under the optimum brazing condition of brazing filler thickness of 120 μm, brazing temperature of 1150 °C, and brazing time of 10 min. The corresponding reaction layer of the SiC/SiC joint is composed of multilayer silicides and TiC band, and many small TiC particles are scattered throughout the matrix of the central part of the joint. The joints thus exhibit stable high-temperature strength. It is believed that the formation of TiC in the joint contributes not only to the elimination of the periodic banded reaction structure, but also to the high joint strength and the high-temperature stability.

A predictive display method and man-virtual robot interaction based on augmented reality are applied to control a telerobot. We first discuss the process of the augmented reality environment development. Then, we present the advantages of predictive display. Simulation of virtual robot's tasks in the augmented environment improves the safety of the telerobot when it executes the planned tasks. In addition, the immediate feedback from the virtual robot avoids the exacerbation of maneuverability caused by time-delay. For a more natural operation process, we apply multi man-virtual robot interactive methods. Lastly, the experiment of pick & place is conducted to validate the system.

Eleven isolates within four species of the entomogenous fungus Aschersonia from China, the USA, Japan, the Philippines, Malaysia and Columbia were characterized using 17 RAPD primers. Genetic diversity among these strains of Aschersonia was found. The clustering results showed that the genetic variability among interspecies was more than that among intraspecies of Aschersonia. In the constructed phylogenetic tree, these isolates were not clustered according to their geographic origins or hosts. Furthermore, sequences of the divergent domain at the 5′-end of the large subunit (LSU) in nuclear rRNA from the mitosporic entomogenous fungi were employed to analyse the phylogenetic relationships of 11 Aschersonia isolates. The relationships of interspecies or intraspecies shown in the phylogenetic tree were almost consistent with the results of the morphological study. Different species isolated from different geographic origins could be clearly distinguished in the tree. But there were no close relationships among species isolated from the same family or order of insect hosts. The tree indicated that isolate Aa, belonging to A. aleyrodis, was the same as Aa992 and Aa3.4485. Moreover, results of RAPD analyses were consistent with those of LSU nuclear rDNA analysis for the same isolates tested, which consequently indicates that both methods can be independently applied for classification and identification of Aschersonia.

A simple and inexpensive method to modify the surface of a Ti3Al-based alloy, liquid-phase siliconizing and aluminizing by an Al-Si alloy, has been proposed. The surface modification at 1013 K for 10 min using Al-10 wt% Si melt resulted in a modified layer with a thickness of about 21 μm, composed of TiAl3 and TiSi2. The coating improved the isothermal oxidation resistance of the Ti3Al-based alloy at 1073 K. A continuous alumina-rich scale was formed at the outermost surface after oxidation. SiO2 was detectable in the oxide scale. The results of x-ray diffraction and x-ray energy dispersive spectrometer analysis showed that during oxidation, some of the TiSi2 in the coating was oxidized to SiO2. In the meantime, the TiSi2 was reduced to a lower silicide, Ti5Si4. The change of the surface microstructure after oxidation and the diffusion reaction between the coating and the Ti3Al substrate were also discussed.