Energy homeostasis is essential for organisms to maintain fluctuation in energy accumulation, mobilization. Lipids as the main energy reserve in insects, their metabolism is under the control of many physiological program. This study aimed to determine whether the adipokinetic hormone receptor (AKHR) was involved in the lipid mobilization in the Spodoptera litura. A full-length cDNA encoding AKHR was isolated from S. litura. The SlAKHR protein has a conserved seven-transmembrane domain which is the character of a putative G protein receptor. Expression profile investigation revealed that SlAKHR mRNA was highly expressed in immatural stage and abundant in fat body in newly emerged female adults. Knockdown of SlAKHR expression was achieved through RNAi by injecting double-stranded RNA (dsRNA) into the 6th instar larvae. The content of triacylgycerol (TAG) in the fat body increased significantly after the SlAKHR gene was knockdown. And decrease of TAG releasing to hemolymph with increase of free fatty acid (FFA) in hemolymph were observed when the SlAKHR gene was knowned-down. In addition, lipid droplets increased in fat body was also found. These results suggested that SlAKHR is critical for insects to regulate lipids metabolism.

The fiber laser based on an oscillating-amplifying integrated structure has the potential to benefit from the advantages of a fiber laser oscillator and amplifier with the characteristics of strong anti-back-reflected light ability and high efficiency. Here, we achieved a 3.5-kW near-single-mode (M2 ∼ 1.24) oscillating–amplifying integrated fiber laser with an active fiber length of 8 m in the oscillating section and 17.6 m in the amplifying section. While operating at the maximum power, the optical-to-optical conversion efficiency is 87.0%, and the intensity of stimulated Raman scattering is about 23.61 dB lower than that of the signal light. To the best of the authors’ knowledge, this is the highest output power of an oscillating–amplifying integrated fiber laser, accompanied with the best beam quality and the highest efficiency.

Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality (M2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

The poultry red mite, Dermanyssus gallinae, is currently the most common ectoparasite affecting egg-laying hens. Since continuous culture of D. gallinae on birds is a biologically and economically costly endeavour, storage techniques for mites are urgently needed. Effects of temperature on adult and nymph survival were first studied to optimize storage conditions. Then, fecundity of D. gallinae was studied after mites were stored at optimal storage conditions. Results showed the survival rates of protonymphs (42.11%), deutonymphs (8.19%) and females (19.78%) at 5°C after 84 days were higher than those at 0, 25 and 30°C. Thereafter the fecundity and the capability of re-establishing colonies of D. gallinae were evaluated after they were stored for 40 and 80 days at 5°C. After storage, the mean number of eggs showed no statistical difference between treated (5°C for 40 or 80 days) and control groups (25°C for 7 days), while the hatching rates of eggs were in all cases above 97%. The dynamic changes of mite populations and egg numbers showed similar trends to the control group after the stored adult or nymph mites were fed on chicks. Dermanyssus gallinae can be successfully stored at 5°C for 80 days with no interference with the fecundity of mites, and the stored mites could re-establish colonies successfully. Adults and nymphs were two main stages with capability for low temperature storage. These results suggest that low temperature storage is a viable option for colony maintenance of D. gallinae under laboratory conditions.

High-peak-power transform-limited narrow-linewidth nanosecond all-fiber lasers are desired in a range of applications. However, their linewidths will be broadened by self-phase modulation (SPM). We propose a novel concept that generates transform-limited laser pulses by temporally shaping the pulse seed. The impact of the pulse shape on SPM-induced spectral broadening was studied numerically and experimentally. It was found theoretically that the square-shape pulsed laser is immune to SPM-induced spectral broadening. Based on this principle, we built a high-peak-power, linearly polarized, square-shape nanosecond all-fiber laser in a master oscillator power amplifier (MOPA) configuration. Stimulated Brillouin scattering (SBS) limited peak powers of 4.02 kW, 5.06 kW, 6.52 kW and 9.30 kW were obtained at pulse widths of 8 ns, 7 ns, 6 ns and 5 ns. Thanks to the square-shape pulsed seed, the linewidths at maximum peak power remained at 129.5 MHz, 137.6 MHz, 156.2 MHz and 200.1 MHz, respectively, close to the transform-limited values of 110.8 MHz, 126.6 MHz, 147.7 MHz and 177.3 MHz.

Stimulated Raman scattering (SRS) effect is considered to be one of the main obstacles for power scaling in general-type fiber lasers. Different from previous techniques that aim at suppressing SRS, nonlinear fiber amplifier (NFA), which manipulates and employs the SRS for power scaling in rare-earth-doped fiber, is under intensive research in recent years. In this paper, the authors will present an all-round study on this new kind of high-power fiber amplifier. A theoretical model is proposed based on the rate equation and amplified spontaneous emission (ASE), with random noise taken into account. By numerical solving of the theoretical model, the power scaling potential, heat analysis and advantages in suppressing the undesired backscattering light are quantificationally analyzed for the first time. Then two different types of high-power NFAs are demonstrated individually. Firstly, a laser diode pumped NFA has reached kilowatt output power, and the results agree well with theoretical predictions. Secondly, a tandem-pumped NFA is proposed for the first time and validated experimentally, in which 1.5 kW output power has been achieved. The authors also briefly discuss several new issues relating to the complex nonlinear dynamics that occur in high-power NFAs, which might be interesting topics for future endeavors.

Markley variables have advantages of slow variation, easy numerical integration and high precision in describing the attitude of spinning spacecraft. Previous attitude estimation methods based on Markley variables for spinning spacecraft usually employ a sun vector from the sun sensor, a magnetic vector from the magnetometer, or the angular rate from the gyro as the measurement. This paper proposes a Markley variables-based attitude estimation method using optical flow and a star vector from a star sensor as the measurement, where optical flow provides rate information and the star vector provides direction information. This method can estimate the direction of the spin axis and spin angular rate very well by using only one star sensor. In addition, the star sensor has higher accuracy than the traditional sun sensor and magnetometer, and the star sensor can also replace the gyro in case the gyro is out of action. The impact factors of this method are also analysed, which include spin angular rate, spin axis orientation and spacecraft moment of inertia tensor error.

Compared with traditional uniform fibers, tapered fiber has numerous unique advantages, such as larger mode area, higher pump absorption, suppression to nonlinear effects, and maintaining good beam quality. In this manuscript, we have constructed an all-fiberized fiber amplifier which is based on a piece of ytterbium-doped tapered double-clad fiber (T-DCF). The fiber amplifier is operated under continuous wave (CW) regime at 1080 nm wavelength. The $M^{2}$ factor of the amplifier at 1.39 kW output power is ${\sim}1.8$. The maximum output power of the system reached 1.47 kW, which, to the best of our knowledge, is the highest output power of long tapered fiber based fiber laser system. Our result successfully verifies the potential of power scalability and all-fiberized capability of long tapered fiber, and the performance of our system can be further enhanced by fiber design optimization.

Global Navigation Satellite System (GNSS) attitude determination and positioning play an important role in many navigation applications. However, the two GNSS-based problems are usually treated separately. This ignores the constraint information of the GNSS antenna array and the accuracy is limited. To improve the performance of navigation, an integrated attitude and position determination method based on an affine constraint model is presented. In the first part, the GNSS array model and affine constrained attitude determination method are compared with the unconstrained methods. Then the integrated attitude and position determination method is presented. The performance of the proposed method is tested with a series of static data and dynamic experimental GNSS data. The results show that the proposed method can improve the success rate of ambiguity resolution to further improve the accuracy of attitude determination and relative positioning compared to the unconstrained methods.

2-[((3R)-5-oxo-4-phenyltetrahydrofuran-3-yl)methyl]isoindoline-1,3-dione, C19H15NO4, was synthesized for the first time. Its structure was characterized by element analysis, ultraviolet spectrometry, nuclear magnetic resonance, and single X-ray diffraction (SXRD). X-ray powder diffraction (XRPD) data of title compound were collected and calculated. The result of SXRD shows that its crystal system is orthorhombic, space group is Pbca, and unit-cell parameters are a = 8.861 57(7), b = 14.6666(10), c = 24.4247(19) Å, α =β =γ =90°, unit-cell volume V = 3174.4 Å3, and Z = 8. All XRPD measured lines were indexed and consistent with the Pbca space group [a = 14.639(7), b = 24.378(3), c = 8.918(1) Å, α = β = γ = 90°, unit-cell volume V = 3182.7(9) Å3, Z = 8]. No detectable impurities were observed.

A high power narrow-linewidth nanosecond all-fiber laser based on the master oscillator power amplifier (MOPA) configuration is demonstrated. A pulsed seed with high repetition rate of 10 MHz was generated by modulating a continuous-wave (CW) single-frequency fiber laser at $\sim $1064 nm by using an electro-optic intensity modulator (EOIM). After multi-stage cascaded power amplification, the average power was boosted to be kilowatt level. The pulses from the main amplifier had a pulse width of $\sim $3 ns and an average/peak power of 913 W/28.6 kW. Further power scaling of the pulses was limited by stimulated Raman scattering (SRS) for the moment, method for SRS suppression and further power scaling was briefly discussed.

A multiple-image method is proposed to approximate the reaction-field potential of a source charge inside a finite length cylinder due to the electric polarization of the surrounding membrane and bulk water. When applied to a hybrid ion-channel model, this method allows a fast and accurate treatment of the electrostatic interactions of protein with membrane and solvent. To treat the channel/membrane interface boundary conditions of the electric potential, an optimization approach is used to derive image charges by fitting the reaction-field potential expressed in terms of cylindric harmonics. Meanwhile, additional image charges are introduced to satisfy the boundary conditions at the planar membrane interfaces. In the end, we convert the electrostatic interaction problem in a complex inhomogeneous system of ion channel/membrane/water into one in a homogeneous free space embedded with discrete charges (the source charge and image charges). The accuracy of this method is then validated numerically in calculating the solvation self-energy of a point charge.

This paper uses the living standards method to estimate the extra costs for older people with functional disabilities in urban areas in Northern China. The research finds that the cost for older people who live alone is higher than those who live with other family members, and their living standard is lower. The costs increase with the age, especially for the oldest old people who live alone. The cost for older women is higher than their male counterparts. The extra costs of support for people with functional disabilities decrease the overall living standard of the household.

The multi-walled carbon nanotubes (MWNTs) prepared by CVD were used in electrochemical intercalation reaction with Li+. The results of the first several charge-discharge cycles showed that the reversible capacity of the MWNTs was larger than the theoretical capacity of graphitized carbon. The equivalent circuit of the Li+ intercalated into the MWNTs was simulated The diffusion coefficient calculated based on the results of the impedance was in the range between 1 ∼ 4×10−10 cm2s−1. The diffusion coefficient calculated based on the technique of the chronoamperometery was 3.5×10−10 cm2s−1. The diffusion coefficients of the Li+ reacted with MWNTs was in the range of that of the most carbon materials. Using EMF method the partial molar entropy (ΔSx) and partial molar enthalpy (ΔHx) of the Li+ intercalated into the MWNTs were calculated as a function of × in Lix C6 at different temperatures. The values of ΔSx were in the range of 150 ∼ 550 J mol-1K-1. The values of ΔHx at 35 °C were in the range of 40∼110 kJ mol−1. Both of the ΔSx and ΔHx were lower and the changes were smaller than the values of some other carbonaceous materials. By analyzing the results conclusion is obtained that Li+ exist in MWNTs with different types which include adsorption and intercalation types.

This paper presents a concept on the subjective ship domain. The factors related to the domain are discussed. A method based on the neural networks is used to establish a model of the domain that considers the effects of visibility and manoeuvrability, which can react quickly to various ships within a certain range.