FFD (free-form deformation method) is one of the most commonly used parameterisation methods at present. It places the parameterised objects inside the control volume through coordinate system transformation, and controls the control volume through control points, thus realising the deformation control of its internal objects. Firstly, this paper systematically analyses and compares the characteristics and technical requirements of Bernstein, B-spline and NURBS (non-uniform rational b-splines) basic functions that can be adopted by FFD, and uses the minimum number of control points required to achieve the specified control effect threshold to express the control capability. Aiming at the problem of discontinuity at the right end in the actual calculation of B-spline basis function, a method of adding a small epsilon is proposed to solve it. Then, three basic functions are applied to the FFD parameterisation method, respectively, and the differences are compared from two aspects of the accurate expression of the model and the ability of deformation control. It is found that the BFFD (b-spline free-form deformation) approach owns better comprehensive performance when the control points are distributed correctly. In this paper, the BFFD method is improved, and a p-BFFD (reverse solution points based BFFD) method based on inverse solution is proposed to realise the free distribution of control points under the specified topology. Further, for the lifting body configuration, the control points of the p-BFFD method are brought closer to the airframe forming the EDGE-p-BFFD (edge constraints based p-BFFD) method. For the case in this paper, the proposed EDGE-p-BFFD method not only has fairly high parameterisation accuracy, but also reduces the expression error from 1.01E-3 to 1.25E-4, which is nearly ten times. It can also achieve effective lifting body guideline constraints, and has the ability of local deformation adapting to the configuration characteristics. In terms of the proportion of effective control points, the EDGE-p-BFFD method increases the proportion of effective control points from 36.7% to 50%, and the more control points, the more obvious the proportion increase effect. The new method also has better effect on the continuity of geometric deformation. At the same time, this paper introduces the independent deformation method of the upper and lower surfaces based on the double control body frames, which effectively avoids the deformation coupling problem of the simultaneous change of the upper and lower surfaces caused by the movement of control points in the traditional single control framework.

The pulsed jet is a novel and effective active mixing enhancement approach. For the transverse pulsed jet in the supersonic crossflow, the frequency influence is investigated using the three-dimensional Reynolds-averaged Navier–Stokes (RANS) equations coupled with the SST k-ω turbulence model. The averaged flow field properties of the pulsed jet are better than those of the steady jet when considering mixing efficiency and jet penetration depth, especially for the case with the pulsed frequency being 50kHz. The flow field structures of the pulsed jet are connected with the time, with periodic wave structures generating in the flow field and moving downstream. The size of the wave structures and its distance are related to the frequency, namely the size and flow distance are relatively small at 50kHz, and it takes some time for the pulsed jet to establish its influence in the full flow field. At low frequencies, the flow field produces large fluctuations, and this may be detrimental to the stable operation of the engine.

Planting patterns have significant effects on rice growth. Nonetheless, little is known about differences in annual crop yield and resource utilization among mechanized rice planting patterns in a rice–wheat cropping system. Field experiments were conducted from 2014 to 2017 using three treatments: pot seedling transplanting for rice and row sowing for wheat (PST-RS), carpet seedling transplanting for rice and row sowing for wheat (CST-RS) and row sowing for both crops (RS-RS). The results showed that, compared with RS-RS, PST-RS and CST-RS prolonged annual crop growth duration by 25–26 and 13–15 days, increased effective accumulated temperature by 399 and 212°C days and increased cumulative solar radiation by 454 and 228 MJ/m2 because of the earlier sowing of rice by 28 and 16 days in PST-RS and CST-RS, respectively. Compared with RS-RS, the annual crop yield of PST-RS and CST-RS increased by 3.1–3.8 and 2.0–2.6 t/ha, respectively, because of the increase in the number of spikelets/kernels per hectare, aboveground biomass, mean leaf area index and grain–leaf ratio. In addition, temperature production efficiency, solar radiation production efficiency and solar radiation use efficiency were higher in PST-RS, followed by CST-RS and RS-RS. These results suggest that mechanized rice planting patterns such as PST-RS increase annual crop production in rice–wheat cropping systems by increasing yield and solar energy utilization.

The great demographic pressure brings tremendous volume of beef demand. The key to solve this problem is the growth and development of Chinese cattle. In order to find molecular markers conducive to the growth and development of Chinese cattle, sequencing was used to determine the position of copy number variations (CNVs), bioinformatics analysis was used to predict the function of ZNF146 gene, real-time fluorescent quantitative polymerase chain reaction (qPCR) was used for CNV genotyping and one-way analysis of variance was used for association analysis. The results showed that there exists CNV in Chr 18: 47225201-47229600 (5.0.1 version) of ZNF146 gene through the early sequencing results in the laboratory and predicted ZNF146 gene was expressed in liver, skeletal muscle and breast cells, and was amplified or overexpressed in pancreatic cancer, which promoted the development of tumour through bioinformatics. Therefore, it is predicted that ZNF146 gene affects the proliferation of muscle cells, and then affects the growth and development of cattle. Furthermore, CNV genotyping of ZNF146 gene was three types (deletion type, normal type and duplication type) by Real-time fluorescent quantitative PCR (qPCR). The association analysis results showed that ZNF146-CNV was significantly correlated with rump length of Qinchuan cattle, hucklebone width of Jiaxian red cattle and heart girth of Yunling cattle. From the above results, ZNF146-CNV had a significant effect on growth traits, which provided an important candidate molecular marker for growth and development of Chinese cattle.

Severe fever with thrombocytopenia syndrome (SFTS) is a disease with a high case-fatality rate that is caused by infection with the SFTS virus (SFTSV). Five electronic databases were systematically searched to identify relevant articles published from 1 January 2011 to 1 December 2019. The pooled rates with 95% confidence interval (CI) were calculated by a fixed-effect or random-effect model analysis. The results showed that 92 articles were included in this meta-analysis. For the confirmed SFTS cases, the case-fatality rate was 0.15 (95% CI 0.11, 0.18). Two hundred and ninety-six of 1384 SFTS patients indicated that they had been bitten by ticks and the biting rate was 0.21 (95% CI 0.16, 0.26). The overall pooled seroprevalence of SFTSV antibodies among the healthy population was 0.04 (95% CI 0.03, 0.05). For the overall seroprevalence of SFTSV in animals, the seroprevalence of SFTSV was 0.25 (95% CI 0.20, 0.29). The infection rate of SFTSV in ticks was 0.08 (95% CI 0.05, 0.11). In conclusion, ticks can serve as transmitting vectors of SFTSVs and reservoir hosts. Animals can be infected by tick bites, and as a reservoir host, SFTSV circulates continuously between animals and ticks in nature. Humans are infected by tick bites and direct contact with patient secretions.

The analysis of the aerodynamic environment of the re-entry vehicle attaches great importance to the design of the novel drag reduction strategies, and the combinational spike and jet concept has shown promising application for the drag reduction in supersonic flows. In this paper, the drag force reduction mechanism induced by the combinational spike and lateral jet concept with the freestream Mach number being 5.9332 has been investigated numerically by means of the two-dimensional axisymmetric Navier-Stokes equations coupled with the shear stress transport (SST) k-ω turbulence model, and the effects of the lateral jet location and its number on the drag reduction of the blunt body have been evaluated. The obtained results show that the drag force of the blunt body can be reduced more profoundly when employing the dual lateral jets, and its maximum percentage is 38.81%, with the locations of the first and second lateral jets arranged suitably. The interaction between the leading shock wave and the first lateral jet has a great impact on the drag force reduction. The drag force reduction is more evident when the interaction is stronger. Due to the inclusion of the lateral jet, the pressure intensity at the reattachment point of the blunt body decreases sharply, as well as the temperature near the walls of the spike and the blunt body, and this implies that the multi-lateral jet is beneficial for the drag reduction.

Tuberculosis (TB) is the leading cause of death among infectious diseases. China has a high burden of TB and accounted for almost 13% of the world's cases of multi-drug resistant (MDR) TB. Spinal TB is one reason for the resurgence of TB in China. Few large case studies of MDR spinal TB in China have been conducted. The aim of this research was to observe the epidemiological characteristics of inpatients with MDR spinal TB in six provinces and cities of China from 1999–2015. This is a multicentre retrospective observational study. Patients' information was collected from the control disease centre and infectious disease database of hospitals in six provinces and cities in China. A total of 3137 patients with spinal TB and 272 patients with MDR spinal TB were analysed. The result showed that MDR spinal TB remains a public health concern and commonly affects patients 15–30 years of age (34.19%). The most common lesions involved the thoracolumbar spine (35.66%). Local pain was the most common symptom (98.53%). Logistic analysis showed that for spinal TB patients, reside in rural district (OR 1.79), advanced in years (OR 1.92) and high education degree (OR 2.22) were independent risk factors for the development of MDR spinal TB. Women were associated with a lower risk of MDR spinal TB (OR 0.48). The most common first-line and second-line resistant drug was isoniazid (68.75%) and levofloxacin (29.04%), respectively. The use of molecular diagnosis resulted in noteworthy clinical advances, including earlier initiation of MDR spinal TB treatment, improved infection control and better clinical outcome. Chemotherapy and surgery can yield satisfactory outcomes with timely diagnosis and long-term treatment. These results enable a better understanding of the MDR spinal TB in China among the general public.

We report on a novel processing route to prepare La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2/Cu bulk composites by low-temperature hot pressing. With increasing copper content, the compressive strength of the composites first decrease and then increase owing to the buffering effect of copper, but the magnetocaloric effect reduces to some extent. Copper addition improves the thermal conductivity of the composites, which compensates for the decrease in thermal conductivity due to porosity. A relatively large entropy change of 5.75–7.19 J/(kg K) at 2 T near the Curie temperature (249 K), good thermal conductivity of 7.51–15.55 W/(m·K), and improved compressive strength of 151.1–248.0 MPa make these composites attractive magnetic refrigeration materials.

Pheromones play an important role in mediating interspecific interactions in insects. In an insect community, pheromones can reveal information about the senders, which could be used by other members of the food web (competitor, natural enemies, etc.) to their own advantage. The aggregation pheromones of two closely related thrips species, Frankliniella occidentalis and Frankliniella intonsa, have been identified with the same major compounds, (R)-lavandulyl acetate and neryl (S)-2-methylbutanoate, but in different ratios. However, the roles of the aggregation pheromones in the interspecific interactions between these two closely related species are unknown. Here, we investigated the roles of major aggregation pheromone compounds in interspecific interactions between F. occidentalis and F. intonsa for both long and short ranges. The results showed that, at tested doses, neither aggregation pheromone-induced long range cross-attraction nor short range cross-mating was detected between F. occidentalis and F. intonsa. Field-trapping trials showed that the species-specificity in aggregation pheromones was regulated by the ratio of two major compounds. However, species-specific blends of the two major compounds had no effect on short-range interactions between these two species. Our data from the thrips species provide support for the ‘aggregation model of coexistence’, explaining the species-specific pheromone-mediated coexistence of closely related species. Thus, species-specific pheromones could be one of the factors affecting population dynamics and community structure in closely related insects with similar niches.

Four complete platysiagid fish specimens are described from the Luoping Biota, Anisian (Middle Triassic), Yunnan Province, southwest China. They are small fishes with bones and scales covered with ganoine. All characters observed, such as nasals meeting in the midline, a keystone-like dermosphenotic, absence of post-rostral bone, two infraorbitals between dermosphenotic and jugal, large antorbital, and two postcleithra, suggest that the new materials belong to a single, new Platysiagum species, P. sinensis sp. nov. Three genera are ascribed to Platysiagidae: Platysiagum, Helmolepis and Caelatichthys. However, most specimens of the first two genera are imprints or fragmentary. The new, well-preserved specimens from the Luoping Biota provide more detailed anatomical information than before, and thus help amend the concept of the Platysiagidae. The Family Platysiagidae was previously classed in the Perleidiformes. Phylogenetic analysis indicates that the Platysiagidae is a member of basal Neopterygii, and its origin seems to predate that of Perleidiformes. Moreover, platysiagid fishes are known from the Middle Triassic of the western Tethys region. The newly found specimens of platysiagids from Luoping provide additional evidence that both eastern and western sides of the Tethys Ocean were biogeographically more connected than previously thought.

TAOS II is a next-generation occultation survey with the goal of measuring the size distribution of the small end of the Kuiper Belt (objects with diameters 0.5–30 km). Such objects have magnitudes r > 30, and are thus undetectable by direct imaging. The project will operate three telescopes at San Pedro Mártir Observatory in Baja California, México. Each telescope will be equipped with a custom-built camera comprised of a focal-plane array of CMOS imagers. The cameras will be capable of reading out image data from 10,000 stars at a cadence of 20 Hz. The telescopes will monitor the same set of stars simultaneously to search for coincident occultation detections, thus minimising the false-positive rate. This talk described the project, and reported on the progress of the development of the survey infrastructure.

A number of laser facilities coming online all over the world promise the capability of high-power laser experiments with shot repetition rates between 1 and 10 Hz. Target availability and technical issues related to the interaction environment could become a bottleneck for the exploitation of such facilities. In this paper, we report on target needs for three different classes of experiments: dynamic compression physics, electron transport and isochoric heating, and laser-driven particle and radiation sources. We also review some of the most challenging issues in target fabrication and high repetition rate operation. Finally, we discuss current target supply strategies and future perspectives to establish a sustainable target provision infrastructure for advanced laser facilities.

MicroRNAs (miRNAs) are a class of small non-coding RNAs that negatively regulate gene expression of target messenger RNAs (mRNAs) and miRNAs have been proven to play vital roles in skeletal muscle development. The miRNA-499-5p has been reported to be negatively related with the expression of Sox6, a critical transcription factor for the maintenance of fast-twitch skeletal muscle. In this study, we amplified a length of 2012-bp mRNA that contains a 1512-bp porcine Sox6 (pSox6) 3'UTR from skeletal muscle of a Duroc×Landrace×Yorkshire pig. By luciferase reporter assay we verified that pSox6 is a target of miR-499-5p. In extensor digitorum longus and Soleus muscles of pigs, the expression levels of miR-499-5p and pSox6 mRNA were also inversely correlated. Besides, overexpression of miR-499-5p in porcine satellite cells promoted the expression of MyHC I and MyHC IIa mRNA, along with a reduction of pSox6 mRNA. Taken together, these results indicate that miR-499-5p may facilitate the oxidative myofibers formation by downregulating pSox6 expression.

Using the spectroscopic distances of over 0.12 million A-type stars selected from the LAMOST Spectroscopic Survey of the Galactic Anti-center (LSS-GAC), we map their three-dimensional number density distributions in the Galaxy. These stellar number density maps allow an investigation of the Galactic young age thin disk structure with no a priori assumptions about the functional form of its components. The data show strong evidence for a significant flaring young disk. A more detail analysis show that the stellar flaring have different behaviours between the Northern and the Southern Galactic disks. The maps also reveal spatially coherent, kpc-scale stellar substructure in the thin disk. Finally, we detect the Perseus arm stellar overdensity at R ~ 10 kpc.

Aerial photography was conducted in the high Arctic Ocean during a Chinese research expedition in summer 2010. By partitioning the images into three distinct surface categories (sea ice/snow, water and melt ponds), the areal fraction of each category, ice concentration and the size and geometry of individual melt ponds, are determined with high-spatial resolution. The ice concentration and melt pond coverage have large spatial deviations between flights and even between images from the marginal ice zone to the pack ice zone in the central Arctic. Ice concentration and pond coverage over high Arctic (from 84°N to north) was ~75% and ~6.8%, respectively, providing ‘ground truth’ for the unusual transpolar reduction strip of ice indicated concurrently by AMSR-E data and for the regions (north of 88°N) where no passive microwave sensors can cover. Melt pond size and shape distributions are examined in terms of pond area (S), perimeter (P), mean caliper dimension (MCD) (L), roundness (R), convex degree (C), the ratio of P/S and fractal dimension (D). Power-law relationships are developed between pond size and number. Some general trends in geometric metrics are identified as a function of pond area including R, C, P/S and D. The scale separation of pond complexity is demonstrated by analyzing area-perimeter data. The results will potentially help the modelling of melt pond evolution and the determination of heterogeneity of under-ice transmitted light fields.