To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure firstname.lastname@example.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
This work deals with the closed-loop control of streaky structures induced by free-stream turbulence (FST), at the levels of 3.0 % and 3.5 %, in a zero-pressure-gradient transitional boundary layer, by means of localized sensors and actuators. A linear quadratic Gaussian regulator is considered along with a system identification technique to build reduced-order models for control. Three actuators are developed with different spatial supports, corresponding to a baseline shape with only vertical forcing, and to two other shapes obtained by different optimization procedures. A computationally efficient method is derived to obtain an actuator that aims to induce the exact structures that are inside the boundary layer, given in terms of their first spectral proper orthogonal decomposition (SPOD) mode, and an actuator that maximizes the energy of induced downstream structures. All three actuators lead to significant delays in the transition to turbulence and were shown to be robust to mild variations in the FST levels. Integrated total drag reductions observed were up to 21 % and 19 % for turbulence intensity levels of 3.0 % and 3.5 %, respectively, depending on the considered actuator. Differences are understood in terms of the SPOD of actuation and FST-induced fields along with the causality of the control scheme when a cancellation of disturbances is considered along the wall-normal direction. The actuator optimized to generate the leading downstream SPOD mode, representing the streaks in the open-loop flow, leads to the highest transition delay, which can be understood due to its capability of closely cancelling structures in the boundary layer.
The current work presents a realizable method to control streaky disturbances in boundary layer flows and delay transition to turbulence by means of active flow control. Numerical simulations of the nonlinear transitional regime in a Blasius boundary layer are performed where streaks are excited in the boundary layer by means of a high level of free-stream turbulence. The occurring disturbances are measured by means of localized wall-shear-stress sensors and damped out using near-wall actuators, which resemble ring plasma actuators. Each actuator is powered by a time-varying signal whose amplitude is computed by processing signals from the sensors. The processed signal is the result of two control laws: the linear quadratic Gaussian regulator (LQG) and the inverse feed-forward control technique (IFFC). The use of the first control method, LQG, requires a state-space representation of the system dynamics, so the flow is described by means of a linear time-invariant operator that captures only the most relevant information of the dynamics and results in a reduced-order model (ROM). The ROM is computed by means of the eigensystem realization algorithm (ERA), which is based on the impulse responses of the real system. Collecting such impulse responses may be unfeasible when considering free-stream turbulence because of the high dimensionality of the input forcing needed for a precise description of such a phenomenon. Here, a new method to identify the relevant system dynamics and generate the needed impulse responses is proposed, based on additional shear-stress measurements in an upstream location. Transfer functions between such measurements and other downstream sensors are obtained and allow the derivation of the ERA system, in a data-driven approach that would be realizable in experiments. Finally, in order to discuss the advantages of the LQG based on the ROM and analyse its performance, the implemented LQG is compared to the IFFC, which consists of wave cancellation. The work (i) presents a systematic and straightforward way to deal with high-dimensional disturbances in order to build ROMs for a feasible control technique, and (ii) shows that even when considering practical constraints, such as the type and size of actuators and sensors, it is possible to achieve at least as large delay of bypass transition as that obtained in more idealized cases found in the literature.
Both transposition of the great arteries (TGA) previously submitted to a Senning/Mustard procedure and congenitally corrected TGA (cc-TGA) have the systemic circulation supported by the morphological right ventricle, thereby rendering these patients to heart failure events risk. The aim of this study was to evaluate cardiopulmonary exercise test parameters for stratifying the risk of heart failure events in TGA patients.
Retrospective evaluation of adult TGA patients with systemic circulation supported by the morphological right ventricle submitted to cardiopulmonary exercise test in a tertiary centre. Patients were followed up for at least 1 year for the primary endpoint of cardiac death or heart failure hospitalisation. Several cardiopulmonary exercise test parameters were analysed as potential predictors of the combined endpoint and their predictive power were compared (area under the curve).
Cardiopulmonary exercise test was performed in 44 TGA patients (8 cc-TGA), with a mean age of 35.1 ± 8.4 years. The primary endpoint was reached by 10 (22.7%) patients, with a mean follow-up of 36.7 ± 26.8 months. Heart rate at anaerobic threshold had the highest area under the curve value (0.864), followed by peak oxygen consumption (pVO2) (0.838). Heart rate at anaerobic threshold ≤95 bpm and pVO2 ≤20 ml/kg/min had a sensitivity of 87.5 and 80.0% and a specificity of 82.4 and 76.5%, respectively, for the primary outcome.
Heart rate at anaerobic threshold ≤95 bpm had the highest predictive power of all cardiopulmonary exercise test parameters analysed for heart failure events in TGA patients with systemic circulation supported by the morphological right ventricle.
Considering a potential exercise-drug interaction, we investigated whether exercise training could improve the efficacy of specific antiparasitic chemotherapy in a rodent model of Chagas disease. Wistar rats were randomized into five groups: sedentary and uninfected (CT); sedentary and infected (SI); sedentary, infected and treated (SIT); trained and infected (TI); trained, infected and treated (TIT). After 9-weeks running training, the animals were infected with T. cruzi and followed up for 4 weeks, receiving 100 mg kg−1 day−1 benznidazole. No evidence of myocarditis was observed in CT animals. TI animals exhibited reduced parasitemia, myocarditis, and reactive tissue damage compared to SI animals, in addition to increased IFN-γ, IL-4, IL-10, heart non-protein antioxidant (NPA) levels and glutathione-s transferase activity (P < 0.05). The CT, SIT and TIT groups presented similar reductions in parasitemia, cytokines (IFN-γ, TNF-α, IL-4, IL-10, IL-17 and MCP-1), inflammatory infiltrate, oxidative heart damage and antioxidant enzymes activity compared to SI and TI animals, as well as reduced heart microstructural remodeling (P < 0.05). By modulating heart inflammation and redox metabolism, exercise training exerts a protective effect against T. cruzi infection in rats. However, the antiparasitic and cardioprotective effects of benznidazole chemotherapy are more pronounced, determining similar endpoints in sedentary and trained T. cruzi-infected rats.
Space Infrared Telescope for Cosmology and Astrophysics (SPICA), the cryogenic infrared space telescope recently pre-selected for a ‘Phase A’ concept study as one of the three remaining candidates for European Space Agency (ESA's) fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager [SPICA-POL, now called B-fields with BOlometers and Polarizers (B-BOP)], which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetised Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100–350
m images of linearly polarised dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200
m images will also have a factor
30 higher resolution than Planck polarisation data. This will make B-BOP a unique tool for characterising the statistical properties of the magnetised ISM and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing Galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.
This is a copy of the slides presented at the meeting but not formally written up for the volume.
Recently, the telecommunication market experiences an explosion in the subscribers of emergent high-debit services which require bandwidth that exceeds the one provided by actual copper based access networks . To cope with these demands and keep competitive, great efforts have been done to develop access networks based on optical technology, such as passive all-optical networks due to their intrinsic low cost . Sol-gel processing is suitable for the development of organic-inorganic hybrid (OIH) materials for the production of functional integrated optic (IO) devices in a cost effective way. Urea cross-linked OIH show acceptable transparency, mechanical flexibility and thermal stability [3-6]. The control over the refractive index is achieved by zirconium (IV) n-propoxide (ZPO) doping stabilized with methacrylic acid (MA) [3-5]. The combination in a single material of urea cross-linked OIH and ZPO allowed the preparation of UV written low losses planar waveguides  and low rugosity diffraction grating [4,5]. It has been demonstrated that MA acts not only as ZPO stabilizer but impacts directly on the photopolimerization properties as it contains a photopolymerizable group making the OIH easily UV patterned without photoinitiator . Moreover, it also impacts on the OHIs local structure as it forms a complex with ZPO, that originate ordered clusters dispersed within the OIH host [4,5]. Besides the potential of this OIH as IO components, the hybrid hosts are room-temperature efficient white light emitters lacking metal activator ions, presenting quantum yields as higher as 20 % . In this work, a series of OIH, so called di-ureasils, formed of a siliceous skeleton to which oligopolyether chains of different lengths are covalently grafted by means of urea bridges and modified by ZPO and MA will be prepared and characterized by X-ray and small angle X-ray diffractions, Raman, infrared, atomic force and photoluminescence spectroscopies. The use of the proposed OIH in the development of IO functionalities such as optical filters will be evaluated based on waveguide numerical simulation methods (beam propagation method). Waveguides will be written and characterized using the OIH aforementioned. The recording of a Bragg grating in the waveguides allow the implementation of a wavelength discrimination device with applications on optical filtering. The relevant properties of the devices, such as spectral rejection and insertion losses will be characterized.  S-J Park et al. Journal of Lightwave Tech. 22, 2004.  D.J. Shin et al., Journal of Lightwave Tech. 23, 2005.  C. Molina et al., J. Mater. Chem. 15, 3937, 2005.  R.A. Sá Ferreira et al., Proceedings of the International Conference on Telecomunications, 2006.  P.S. André et al. Proceedings ICTON, 1, We.C1.6, 223, 2006.  a) L.D. Carlos et al., Adv. Func. Mater. 11, 111, 2001; b) J. Chem. Phys. B. 108, 14924, 2004. Siemens SA and FCT (POCTI/CTM/59075/2004) is gratefully acknowledged.
Streaks have been found to be an important part of wall-turbulence dynamics. In this paper, we extend the analysis for unbounded shear flows, in particular a Mach 0.4 round jet, using measurements taken using dual-plane, time-resolved, stereoscopic particle image velocimetry (PIV) taken at pairs of jet cross-sections, allowing the evaluation of the cross-spectral density of streamwise velocity fluctuations resolved into azimuthal Fourier modes. From the streamwise velocity results, two analyses are performed: the evaluation of wavenumber spectra (assuming Taylor’s hypothesis for the streamwise coordinate) and a spectral proper orthogonal decomposition (SPOD) of the velocity field using PIV planes in several axial stations. The methods complement each other, leading to the conclusion that large-scale streaky structures are also present in turbulent jets where they experience large growth in the streamwise direction, energetic structures extending up to eight diameters from the nozzle exit. Leading SPOD modes highlight the large-scale, streaky shape of the structures, whose aspect ratio (streamwise over azimuthal length) is approximately 15. The data were further analysed using SPOD, resolvent and transient growth analyses, good agreement being observed between the models and the leading SPOD mode for the wavenumbers considered. The models also indicate that the lift-up mechanism is active in turbulent jets, with streamwise vortices leading to streaks. The results show that large-scale streaks are a relevant part of the jet dynamics.
Motivated by recent studies that have revealed the existence of trapped acoustic waves in subsonic jets (Towne et al., J. Fluid Mech., vol. 825, 2017, pp. 1113–1152), we undertake a more general exploration of the physics associated with acoustic modes in jets and wakes, using a double vortex-sheet model. These acoustic modes are associated with eigenvalues of the vortex-sheet dispersion relation; they are discrete modes, guided by the vortex sheet; they may be either propagative or evanescent; and under certain conditions they behave in the manner of acoustic-duct modes. By analysing these modes we show how jets and wakes may both behave as waveguides under certain conditions, emulating ducts with soft or hard walls, with the vortex-sheet impedance providing effective ‘wall’ conditions. We consider, in particular, the role that upstream-travelling acoustic modes play in the dispersion-relation saddle points that underpin the onset of absolute instability. The analysis illustrates how departure from duct-like behaviour is a necessary condition for absolute instability, and this provides a new perspective on the stabilising and destabilising effects of reverse flow, temperature ratio and compressibility; it also clarifies the differing symmetries of jet (symmetric) and wake (antisymmetric) instabilities. An energy balance, based on the vortex-sheet impedance, is used to determine stability conditions for the acoustic modes: these may become unstable in supersonic flow due to an energy influx through the shear layers. Finally, we construct the impulse response of flows with zero and finite shear-layer thickness. This allows us to show how the long-time wavepacket behaviour is indeed determined by interaction between Kelvin–Helmholtz and acoustic modes.
Three methods are evaluated to estimate the streamwise velocity fluctuations of a zero-pressure-gradient turbulent boundary layer of momentum-thickness-based Reynolds number up to
, using as input velocity fluctuations at different wall-normal positions. A system identification approach is considered where large-eddy simulation data are used to build single and multiple-input linear and nonlinear transfer functions. Such transfer functions are then treated as convolution kernels and may be used as models for the prediction of the fluctuations. Good agreement between predicted and reference data is observed when the streamwise velocity in the near-wall region is estimated from fluctuations in the outer region. Both the unsteady behaviour of the fluctuations and the spectral content of the data are properly predicted. It is shown that approximately 45 % of the energy in the near-wall peak is linearly correlated with the outer-layer structures, for the reference case
. These identified transfer functions allow insight into the causality between the different wall-normal locations in a turbulent boundary layer along with an estimation of the tilting angle of the large-scale structures. Differences in accuracy of the methods (single- and multiple-input linear and nonlinear) are assessed by evaluating the coherence of the structures between wall-normally separated positions. It is shown that the large-scale fluctuations are coherent between the outer and inner layers, by means of an interactions which strengthens with increasing Reynolds number, whereas the finer-scale fluctuations are only coherent within the near-wall region. This enables the possibility of considering the wall-shear stress as an input measurement, which would more easily allow the implementation of these methods in experimental applications. A parametric study was also performed by evaluating the effect of the Reynolds number, wall-normal positions and input quantities considered in the model. Since the methods vary in terms of their complexity for implementation, computational expense and accuracy, the technique of choice will depend on the application under consideration. We also assessed the possibility of designing and testing the models at different Reynolds numbers, where it is shown that the prediction of the near-wall peak from wall-shear-stress measurements is practically unaffected even for a one order of magnitude change in the corresponding Reynolds number of the design and test, indicating that the interaction between the near-wall peak fluctuations and the wall is approximately Reynolds-number independent. Furthermore, given the performance of such methods in the prediction of flow features in turbulent boundary layers, they have a good potential for implementation in experiments and realistic flow control applications, where the prediction of the near-wall peak led to correlations above 0.80 when wall-shear stress was used in a multiple-input or nonlinear scheme. Errors of the order of 20 % were also observed in the determination of the near-wall spectral peak, depending on the employed method.
Livestock plays an important role in the global economy. Climate change effects are not only limited to crop production, but also affect livestock production, for example reduced milk yields and milk quality, reduced meat production and reduced fertility. Therefore, livestock-based food security is threatened in many parts of the world. Furthermore, multiple stressors are a common phenomenon in many environments, and are likely to increase due to climate change. Among these stresses, heat stress appears to be the major factor which negatively influences livestock production. Hence, it is critical to identify agro-ecological zone-specific climate resilient thermo-tolerant animals to sustain livestock production. Livestock responds to the changing environments by altering their phenotypic and physiological characters. Therefore, survivability of the animal often depends on its ability to cope with or adapt to the existing conditions. So to sustain livestock production in an environment challenged by climate change, the animals must be genetically suitable and have the ability to survive in diversified environments. Biological markers or biomarkers indicate the biological states or alterations in expression pattern of genes or state of protein that serve as a reference point in breeding for the genetic improvement of livestock. Conventionally, identification of animals with superior genetic traits that were economically beneficial was the fundamental reason for identifying biomarkers in animals. Furthermore, compared with the behavioural, morphological or physiological responses in animals, the genetic markers are important because of the possibility of finding a solution to animal adaptability to climate change.
Epidemiological studies in humans and animal models (including ruminants and horses) have highlighted the critical role of nutrition on developmental programming. Indeed, it has been demonstrated that the nutritional environment during the periconceptional period and foetal development can altered the postnatal performance of the resultant offspring. This nutritional programming can be exerted by maternal and paternal lineages and can affect offspring beyond the F1 generation. Alterations in epigenetic mechanisms have been proposed as the causative link behind the programming trajectories observed in the offspring. Although a clear cause–effect relationship between epigenetic modifications during early development and later offspring phenotype has not been demonstrated in livestock species, strong associations have been reported for some epigenetic marks (e.g. messenger RNA) that are worth exploring as possible predictors of future offspring phenotype. In this review, we shortly describe the main epigenetic mechanisms studied so far in mammals (i.e. mainly in the mouse) thought to be associated with developmental programming, and discuss the few studies available in mammalian herbivores (e.g. cattle) showing the effect of nutrition on epigenetic marks and the associated phenotype. Clearly, there is a need to develop research on nutritional strategies capable of modulating the epigenetic machinery with positive influence on the phenotype of livestock herbivores. This type of research is needed to alleviate the challenges currently faced by the livestock industry (e.g. impaired fertility of high-yielding dairy cows). This in turn will have a positive influence on animal welfare and productivity of livestock enterprises.
Motivated by the problem of jet–flap interaction noise, we study the tonal dynamics that occurs when an isothermal turbulent jet grazes a sharp edge. We perform hydrodynamic and acoustic pressure measurements to characterise the tones as a function of Mach number and streamwise edge position. The observed distribution of spectral peaks cannot be explained using the usual edge-tone model, in which resonance is underpinned by coupling between downstream-travelling Kelvin–Helmholtz wavepackets and upstream-travelling sound waves. We show, rather, that the strongest tones are due to coupling between Kelvin–Helmholtz wavepackets and a family of trapped, upstream-travelling acoustic modes in the potential core, recently studied by Towne et al. (J. Fluid Mech. vol. 825, 2017) and Schmidt et al. (J. Fluid Mech. vol. 825, 2017). We also study the band-limited nature of the resonance, showing the high-frequency cutoff to be due to the frequency dependence of the upstream-travelling waves. Specifically, at high Mach number, these modes become evanescent above a certain frequency, whereas at low Mach number they become progressively trapped with increasing frequency, which inhibits their reflection in the nozzle plane.
Salmonella prevalence in UK pigs is amongst the highest in Europe, highlighting the need to investigate pig farms which have managed to maintain a low Salmonella seroprevalence. A total of 19 pig farms that had a consistently low (<10%) seroprevalence over 4 years (named Platinum farms) were compared against 38 randomly selected Control farms, chosen to match the same distribution of production types and geographical distribution of the Platinum farms. Each farm was visited and floor faeces and environmental samples were collected. It was shown that Control farms had a significantly higher median percentage of pooled faecal samples positive for Salmonella compared with the Platinum farms (12.1% and 0.4% for pooled faecal samples, respectively) and were more likely to have serovars of public health importance detected (S. Typhimurium/ monophasic variants or S. Enteritidis). Considering the comprehensive on-farm sampling, the identification of farms negative for Salmonella, along with the identification of those that had maintained low prevalence over a long period is important. The risk factor analyses identified pelleted feed, feed deliveries crossing farm perimeter and regular antibiotic use as associated with being a Control farm. Performance data indicated that Platinum farms were performing better for slaughter live weight than Controls. Limited assessments of available pig movement records suggested that the source of pigs was not key to Platinum status, but further study would be needed to confirm this finding. These results emphasise that maintaining very low prevalence on UK farms is achievable.
To investigate the effects of the nozzle-exit conditions on jet flow and sound fields, large-eddy simulations of an isothermal Mach 0.9 jet issued from a convergent-straight nozzle are performed at a diameter-based Reynolds number of
. The simulations feature near-wall adaptive mesh refinement, synthetic turbulence and wall modelling inside the nozzle. This leads to fully turbulent nozzle-exit boundary layers and results in significant improvements for the flow field and sound predictions compared with those obtained from the typical approach based on laminar flow in the nozzle. The far-field pressure spectra for the turbulent jet match companion experimental measurements, which use a boundary-layer trip to ensure a turbulent nozzle-exit boundary layer to within 0.5 dB for all relevant angles and frequencies. By contrast, the initially laminar jet results in greater high-frequency noise. For both initially laminar and turbulent jets, decomposition of the radiated noise into azimuthal Fourier modes is performed, and the results show similar azimuthal characteristics for the two jets. The axisymmetric mode is the dominant source of sound at the peak radiation angles and frequencies. The first three azimuthal modes recover more than 97 % of the total acoustic energy at these angles and more than 65 % (i.e. error less than 2 dB) for all angles. For the main azimuthal modes, linear stability analysis of the near-nozzle mean-velocity profiles is conducted in both jets. The analysis suggests that the differences in radiated noise between the initially laminar and turbulent jets are related to the differences in growth rate of the Kelvin–Helmholtz mode in the near-nozzle region.
The anti-leishmania effects of HIV peptidase inhibitors (PIs) have been widely reported; however, the biochemical target and mode of action are still a matter of controversy in Leishmania parasites. Considering the possibility that HIV-PIs induce lipid accumulation in Leishmania amazonensis, we analysed the effects of lopinavir on the lipid metabolism of L. amazonensis promastigotes. To this end, parasites were treated with lopinavir at different concentrations and analysed by fluorescence microscopy and spectrofluorimetry, using a fluorescent lipophilic marker. Then, the cellular ultrastructure of treated and control parasites was analysed by transmission electron microscopy (TEM), and the lipid composition was investigated by thin-layer chromatography (TLC). Finally, the sterol content was assayed by gas chromatography–mass spectrometry (GC/MS). TEM analysis revealed an increased number of lipid inclusions in lopinavir-treated cells, which was accompanied by an increase in the lipophilic content, in a dose-dependent manner. TLC and GC–MS analysis revealed a marked increase of cholesterol-esters and cholesterol. In conclusion, lopinavir-induced lipid accumulation and affected lipid composition in L. amazonensis in a concentration–response manner. These data contribute to a better understanding of the possible mechanisms of action of this HIV-PI in L. amazonensis promastigotes. The concerted action of lopinavir on this and other cellular processes, such as the direct inhibition of an aspartyl peptidase, may be responsible for the arrested development of the parasite.
Indium oxide (InOx) and indium tin oxide (ITO) thin films were deposited on glass substrates by plasma enhanced reactive thermal evaporation (PERTE) at different substrate temperatures. The films were then submitted to two etching solutions with different chemical reactivity: i) HNO3 (6%), at room temperature; ii) HCl (35%): (40 °Bé) FeCl3 (1:1), at 40 °C. The dependence of the etchability of the films on the structural and deposition conditions is discussed. Previously to etching, structural characterization was made. X-ray diffraction showed the appearance of a peak around 2θ=31° as the deposition temperature increases from room temperature to 190 °C, both for ITO and InOx. AFM surface topography and SEM micrographs of the deposited films are consistent with the structural properties suggested by X-ray spectra: as the deposition temperature increases, the surface changes from a finely grained structure to a material with a larger-sized grain or/and agglomerate structure of the order of 250-300 nm. The roughness Rq varies from 0.74 nm for the amorphous tissue to a maximum of 10.83 nm for the sample with the biggest crystalline grains. Raman spectra are also presented.
High rates of mental illness and addictions are well documented among youth in Nicaragua. Limited mental health services, poor mental health knowledge and stigma reduce help-seeking. The Mental Health Curriculum (MHC) is a Canadian school-based program that has shown a positive impact on such contributing factors. This pilot project evaluated the impact of the MHC on mental wellness and functioning among youth in Leon, Nicaragua.
High school and university students (aged 14–25 years) were assigned to intervention (12-week MHC; n = 567) and control (wait-list; n = 346) groups in a non-randomized design. Both groups completed measures of mental health knowledge, stigma and function at baseline and 12 weeks. Multivariate analyses and repeated measures analyses were used to compare group outcomes.
At baseline, intervention students showed higher substance use (mean difference [MD] = 0.24) and lower perceived stress (MD = −1.36) than controls (p < 0.05); there were no other group differences in function. At 12 weeks, controlling for baseline differences, intervention students reported significantly higher mental health knowledge (MD = 1.75), lower stigma (MD = 1.78), more adaptive coping (MD = 0.82), better lifestyle choices (MD = 0.06) and lower perceived stress (MD = −1.63) (p < 0.05) than controls. The clinical significance as measured by effect sizes was moderate for mental health knowledge, small to moderate for stigma and modest for the other variables. Substance use also decreased among intervention students to similar levels as controls (MD = 0.03) (p > 0.05).
This pilot investigation demonstrates the benefits of the MHC in a low-and-middle-income youth population. The findings replicate results found in Canadian student populations and support its cross-cultural applicability.
We consider steady solutions of the Stokes equations for the flow of a film of fluid on the outer or inner surface of a cylinder that rotates with its axis perpendicular to the direction of gravity. We find that previously unobserved stable and unstable steady solutions coexist over an intermediate range of rotation rates for sufficiently high values of the Bond number (ratio of gravitational forces relative to surface tension). Furthermore, we compare the results of the Stokes calculations to the classic lubrication models of Pukhnachev (J. Appl. Mech. Tech. Phys., vol 18, 1977, pp. 344–351) and Reisfeld & Bankoff (J. Fluid Mech., vol. 236, 1992, pp. 167–196); an extended lubrication model of Benilov & O’Brien (Phys. Fluids, vol. 17, 2005, 052106) and Evans et al. (Phys. Fluids, vol. 16, 2004, pp. 2742–2756); and a new lubrication approximation formulated using gradient dynamics. We quantify the range of validity of each model and confirm that the gradient-dynamics model is most accurate over the widest range of parameters, but that the new steady solutions are not captured using any of the simplified models because they contain features that can only be described by the full Stokes equations.
Bats are ancient hosts of Trypanosoma species and their flying ability, longevity and adaptability to distinct environments indicate that they are efficient dispersers of parasites. Bats from Acre state (Amazon Biome) were collected in four expeditions conducted in an urban forest (Parque Zoobotânico) and one relatively more preserved area (Seringal Cahoeira) in Rio Branco and Xapuri municipalities. Trypanosoma sp. infection was detected by hemoculture and fresh blood examination. Isolated parasite species were identified by the similarity of the obtained DNA sequence from 18S rDNA polymerase chain reaction and reference strains. Overall, 367 bats from 23 genera and 32 species were examined. Chiropterofauna composition was specific to each municipality, although Artibeus sp. and Carollia sp. prevailed throughout. Trypanosoma sp. infection was detected in 85 bats (23·2%). The most widely distributed and prevalent genotypes were (in order) Trypanosoma cruzi TcI, T. cruzi marinkellei, Trypanosoma dionisii, T. cruzi TcIV and Trypanosoma rangeli. At least one still-undescribed Trypanosoma species was also detected in this study. The detection of T. cruzi TcI and TcIV (the ones associated with Chagas disease in Amazon biome) demonstrates the putative importance of these mammal hosts in the epidemiology of the disease in the Acre State.
Wavepackets obtained as solutions of the flow equations linearised around the mean flow have been shown in recent work to yield good agreement, in terms of amplitude and phase, with those educed from turbulent jets. Compelling agreement has been demonstrated, for the axisymmetric and first helical mode, up to Strouhal numbers close to unity. We here extend the range of validity of wavepacket models to Strouhal number
and azimuthal wavenumber
by comparing solutions of the parabolised stability equations with a well-validated large-eddy simulation of a Mach 0.9 turbulent jet. The results show that the near-nozzle dynamics can be correctly described by the homogeneous linear model, the initial growth rates being accurately predicted for the entire range of frequencies and azimuthal wavenumbers considered. Similarly to the lower-frequency wavepackets reported prior to this work, the high-frequency linear waves deviate from the data downstream of their stabilisation locations, which move progressively upstream as the frequency increases.