In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

To assess the role of dietary creatine on myofibre characteristics and protein synthesis in muscle, we fed grass carp (Ctenopharyngodon idellus, initial body weight: 88·47 ± 1·44 g) creatine-supplemented diets (1·84, 5·91, 8·48 and 15·44 g/kg diet) for 8 weeks. Creatine supplementation did not affect growth performance, but significantly increased creatine contents in muscle and liver. At 8·48 g/kg, creatine decreased the activities of alanine transaminase and aspartate aminotransferase in serum and improved hardness and chewiness of muscle due to shorter myofibre mean diameter, higher myofibre density and the frequencies of the diameters of classes I and III and collagen content, longer sarcomere length and upregulated mRNA levels of slow myosin heavy chains. Creatine supplementation upregulated the mRNA expressions of myogenic regulatory factors. The 8·48 g/kg creatine-supplemented diet significantly increased the contents of protein, total amino acids (AA), essential AA and free flavour AAs in muscle, the protein levels of insulin-like growth factor I, myogenic differentiation antigen and PPAR-γ coactlvator-1α in muscle and stimulated the phosphorylation of target of rapamycin (TOR) pathway in muscle. In summary, 8·48 mg/kg creatine improved fish health and skeletal muscle growth and increased hardness and protein synthesis in muscle of grass carp by affecting myofibre characteristics and the TOR signalling pathway. A second-order regression model revealed that the optimal dietary creatine supplementation of grass carp ranges between 8·48 and 12·04 g/kg.

No relevant studies have yet been conducted to explore which measurement can best predict the survival time of patients with cancer cachexia. This study aimed to identify an anthropometric measurement that could predict the 1-year survival of patients with cancer cachexia. We conducted a nested case–control study using data from a multicentre clinical investigation of cancer from 2013 to 2020. Cachexia was defined using the Fearon criteria. A total of 262 patients who survived less than 1 year and 262 patients who survived more than 1 year were included in this study. Six candidate variables were selected based on clinical experience and previous studies. Five variables, BMI, mid-arm circumference, mid-arm muscle circumference, calf circumference and triceps skin fold (TSF), were selected for inclusion in the multivariable model. In the conditional logistic regression analysis, TSF (P = 0·014) was identified as a significant independent protective factor. A similar result was observed in all patients with cancer cachexia (n 3084). In addition, a significantly stronger positive association between TSF and the 1-year survival of patients with cancer cachexia was observed in participants aged > 65 years (OR: 0·94; 95 % CI 0·89, 0·99) than in those aged ≤ 65 years (OR: 0·96; 95 % CI 0·93, 0·99; Pinteraction = 0·013) and in participants with no chronic disease (OR: 0·92; 95 % CI 0·87, 0·97) than in those with chronic disease (OR: 0·97; 95 % CI 0·94, 1·00; Pinteraction = 0·049). According to this study, TSF might be a good anthropometric measurement for predicting 1-year survival in patients with cancer cachexia.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

The present study aimed to investigate the association of the Chinese visceral adiposity index (CVAI) and its 6-year change with hypertension risk and compare the ability of CVAI and other obesity indices to predict hypertension based on the Rural Chinese Cohort Study. Study participants were randomly recruited by a cluster sampling procedure, and 10 304 participants ≥18 years were included. Modified Poisson regression was used to derive adjusted relative risks (RR) and 95 % CI. We identified 2072 hypertension cases during a median of 6·03 years of follow-up. The RR for the highest v. lowest CVAI quartile were 1·29 (95 % CI 1·05, 1·59) for men and 1·53 (95 % CI 1·22, 1·91) for women. Per-sd increase in CVAI was associated with hypertension for both men (RR 1·09, 95 % CI 1·02, 1·16) and women (RR 1·14, 95 % CI 1·06, 1·22). Also, the area under the receiver operating characteristic curve value for hypertension was higher for CVAI than the four other obesity indices for both sexes (all P < 0·05). Finally, per-sd increase in CVAI change was associated with hypertension for both men (RR 1·26, 95 % CI 1·16, 1·36) and women (RR 1·23, 95 % CI 1·15, 1·30). Similar results were observed in sensitivity analyses. CVAI and its 6-year change are positively associated with hypertension risk. CVAI has better performance in predicting hypertension than other visceral obesity indices for both sexes. The current findings suggest CVAI as a reliable and applicable predictor of hypertension in rural Chinese adults.

Metabolically healthy obesity refers to a subset of obese people with a normal metabolic profile. We aimed to explore the association between metabolically healthy and obesity status and risk of hypertension among Chinese adults from The Rural Chinese Cohort Study. This prospective cohort study enrolled 9137 Chinese adults without hypertension, type 2 diabetes or treatment for lipid abnormality at baseline (2007–2008) and followed up during 2013–2014. Modified Poisson regression models were used to examine the risk of hypertension by different metabolically healthy and obesity status, estimating relative risks (RR) and 95 % CI. During 6 years of follow-up, we identified 1734 new hypertension cases (721 men). After adjusting for age, sex, smoking and other confounding factors, risk of hypertension was increased with metabolically healthy general obesity (MHGO) defined by BMI (RR 1·75, 95 % CI 1·02, 3·00) and metabolically healthy abdominal obesity (MHAO) defined by waist circumference (RR 1·51, 95 % CI 1·12, 2·04) as compared with metabolically healthy non-obesity. The associations between metabolically healthy and obesity status and hypertension outcome were consistent after stratifying by sex, age, smoking, alcohol drinking and physical activity. Both MHGO and MHAO were associated with increased risk of hypertension. Obesity control programmes should be implemented to prevent or delay the development of hypertension in rural China.

Energy chirp compensation of the electron bunch (e-bunch) in a laser wakefield accelerator, which is caused by the phase space rotation in the gradient wakefield, has been applied in many schemes for low energy spread e-bunch generation. We report the experimental observation of energy chirp compensation of the e-bunch in a nonlinear laser wakefield accelerator with a negligible beam loading effect. By adjusting the acceleration length using a wedge-roof block, the chirp compensation of the accelerated e-bunch was observed via an electron spectrometer. Apart from this, some significant parameters for the compensation process, such as the longitudinal dispersion and wakefield slope at the bunch position, were also estimated. A detailed comparison between experiment and simulation shows good agreement of the wakefield and bunch parameters. These results give a clear demonstration of the longitudinal characteristics of the wakefield in a plasma and the bunch dynamics, which are important for better control of a compact laser wakefield accelerator.

The high-cycle fatigue (HCF) behavior is significantly affected by surface roughness, especially for high strength metal FV520B-I. However, with surface roughness effect, neither the fatigue property, nor the high-cycle fatigue life model about FV520B-I with surface roughness has been reported. In this paper, designed fatigue experiment using the specimen with different surface roughness is presented to study the effectiveness of the roughness to the fatigue. The observations of the fatigue crack initiation sites and the crack propagation. Then the high cycle fatigue behavior of FV520B-I affected by surface roughness is analyzed. The existing very-high-cycle fatigue life model is not well-fit for high-cycle fatigue model of FV520B-I. A NEW high-cycle fatigue life prediction model of FV520B-I, taking surface roughness as a main effective variable is proposed. The model is built up by a comprehensive use of experimental data and the traditional fatigue modeling theory. The new finding between the fatigue strength coefficient and stress amplitude, with surface roughness, is adopted, leading to a NEW modified life prediction model. Study on fatigue model of FV520B-I with surface roughness is a very beneficial effort in fatigue theory and fatigue engineering development.

A theoretical model is developed to predict the maximum spreading of liquid metal drops when impacting onto dry surfaces under the influence of a vertical magnetic field. This model, which is constructed based on the energy conversion principle, agrees very well with the numerical results, covering a wide range of impact speeds, contact angles and magnetic strengths. When there is no magnetic field, we found that the maximum spreading factor can be predicted well by an interpolating scheme between the viscous and capillary effects, as proposed by Laan et al. (Phys. Rev. Appl., vol. 2 (4), 2014, 044018). However, when gradually increasing the magnetic field strength, the induced Lorentz forces are dominant over the viscous and capillary forces, taking the spreading behaviour into the ‘Joule regime’, where the Joule dissipation is significant. For most situations of practical interest, namely when the strength of the magnetic field is less than 3 T, all three energy conversion routes are important. Therefore, we determine the correct scaling behaviours for the magnetic influence by first equating the loss of kinetic energy to the Joule dissipation in the Joule regime, then by interpolating it with the viscous dissipation and the capillary effects, which allows for a universal rescaling. By plotting the numerical results against the theoretical model, all the results can be rescaled onto a single curve regardless of the materials of the liquid metals or the contact angles of the surfaces, proving that our theoretical model is correct in predicting the maximum spreading factor by constructing a balanced formula between kinetic energy, capillary energy, viscous dissipation energy and Joule dissipation energy.

Large-scale blooms of dinoflagellates, such as Prorocentrum donghaiense and Karenia mikimotoi, have occurred frequently in the East China Sea (ECS) in recent decades. However, little is known about their effects on the entire life history of copepods. Under laboratory conditions, we investigated the effects of these two common dinoflagellates on the survival of Calanus sinicus individuals at different stages and on reproduction of this copepod. Compared with the control treatment (Skeletonema costatum), the presence of P. donghaiense and K. mikimotoi decreased the survival rates of adults and nauplii during the 16 days of the experiment. Survival of nauplii decreased to 49% and 48%, respectively, relative to the nearly 80% survival of adults. Among the six stages of nauplii, individuals at NII and NIII were more susceptible to P. donghaiense and K. mikimotoi. Lower egg production rates were also observed when copepods were exposed to P. donghaiense and K. mikimotoi, and hatching success decreased only with exposure to P. donghaiense. These results suggest that blooms of the two common dinoflagellates may have detrimental effects on the survival of nauplii and the reproduction of C. sinicus, which may pose a major threat to the recruitment of C. sinicus.

The high repetition rate 10 J/10 ns Yb:YAG laser system and its key techniques are reported. The amplifiers in this system have a multi-pass V-shape structure and the heat in the amplifiers is removed by means of laminar water flow. In the main amplifier, the laser is four-pass, and an approximately 8.5 J/1 Hz/10 ns output is achieved in the primary test. The far-field of the output beam is approximately 10 times the diffraction limit. Because of the higher levels of amplified spontaneous emission (ASE) in the main amplifier, the output energy is lower than expected. At the end we discuss some measures that can improve the properties of the laser system.

The gene expression profile of a normal-suffering monozygotic twin pair is investigated to explore biological mechanisms of spastic type cerebral palsy. Main works include following three aspects: First, a cDNA microarray test is carried out to get the differentially expressed genes of the patient with cerebral palsy compared to her monozygotic twin sister. Second, these differentially expressed genes are searched for their bioinformation within 4 biological databases: FatiGO, FatiGOPlus, KEGG, and SOURCE. Third, a set of special genes and gene families are screened out from the spastic type cerebral palsy patient. These biological analyses reveal that those genes for cell junction are mostly down-regulated, while those genes for metabolism are mostly up-regulated. The individual genes, gene family, and their associated biological functions can reflect the pathological and physiological characteristics of the cerebral palsy.

Understanding the factors that affect the nesting success of threatened birds is essential in designing effective conservation strategies. Here we compare nesting success of the Reed Parrotbill Paradoxornis heudei in annually harvested and non-harvested reedbed habitats in the Chongming Dongtan Nature Reserve in China, by recording the number of nestlings produced per nest and the causes of nest failure. We modelled daily nest survival rate (DSR) by considering the effects of harvesting, vegetation characteristics, year, date, advancement within the breeding season, nest age and nearest-nest distance, using the program MARK. Nest densities, but not the number of fledglings per nest, were significantly lower in harvested than non-harvested reedbed habitats. The best-fit DSR model estimated constant survival; none of the tested co-variables had significant effects. Moreover, harvesting did not affect the date of breeding initiation, likelihood of nest failure, or causes of nest failure, as vegetation cover was not significantly different between harvested and non-harvested reedbeds during the whole breeding season. Nest failure following adverse weather conditions was unusually common in harvested and non-harvested reedbeds, accounting for as many nest failures as depredation. However, comparisons with other studies suggest that deriving a conclusion on the impact of harvesting on nesting success is not straightforward and is probably linked to environmental characteristics affecting reed growth.

Two different types of ferroelectric/semiconductor heterostructures, made up of Pb(Zr,Ti)O3/ZnO and BiFeO3/ZnO respectively, were fabricated on Pt(111)/Ti/SiO2/Si(100) by sol-gel process. Obvious diodelike behavior were observed in BiFeO3/ZnO heterostructures when current-voltage characteristics were measured, while Pb(Zr,Ti)O3/ZnO heterostructures exhibited a symmetrical behavior. It is found that Pb(Zr,Ti)O3/ZnO heterostructures showed a large polarization and the remnant polarization was approximately 15μC/cm2. The remnant polarization performed a modulation on the channel resistance. The different properties of two heterostructures might lead to different applications.

We sought to determine whether postcaesarean treatment with whey peptides (WP) affects the healing of skin and uterine incision in rats during puerperium. Forty-eight rats were randomly divided into two groups. After a caesarean section, twenty-four rats were intragastrically administered WP, while others were administered a control vehicle. On days 7, 14 and 21 after delivery, the serum total protein/albumin concentration, skin tensile strength, uterine bursting pressure, skin/uterine hydroxyproline (Hyp) concentration and histological characteristics of the scar were measured in eight rats in each group. In the WP group, the albumin concentration, skin tensile strength, uterine bursting pressure and Hyp concentration in the skin increased significantly on days 21, 7, 14 and 21, respectively. Low neutrophil count and smaller scar width in the skin incision were found in the WP group on day 7. Postcaesarean treatment with WP promoted significant wound healing in the skin incision, and had a significant wound healing potential in the uterus.

Ferroelectric random access memory (FeRAM) is believed to be the most promising candidate for the next generation non-volatile memory due to its fast access time and low power consumption. Fabrication technologies of FeRAM can be divided into two parts: CMOS technologies for circuits which are standard and can be shared with traditional IC process line, and process relating to ferroelectric which is separated with CMOS process and defined as backend module. This paper described technologies for integrating ferroelectric capacitors into standard CMOS, mainly about modeling of ferroelectric capacitors and backend fabrication technologies. Hysteresis loop of the ferroelectric capacitor is the basis for FeRAM to store data. Models to describe this characteristic are the key for the design of FeRAM. A transient behavioral ferroelectric capacitor model based on C-V relation for circuit simulation is developed. The arc tangent function is used to describe the hysteresis loop. “Negative capacitance” phenomenon at reversing points of applied voltage is analyzed and introduced to the model to describe transient behaviors of the capacitor. Compact equivalent circuits are introduced to integrate this model into HSPICE for circuit simulation. Ferroelectric materials fabrication, electrodes integration and etching are the main technologies of FeRAM fabrication process. An metal organic chemical vapor deposition (MOCVD) process is developed to fabricate high quality Pb(Zr1-xTix)O3 (PZT) films. Pt is known to cause the fatigue problems when used as electrodes with PZT. Ir is used as electrodes to improve the fatigue property of PZT based capacitors, and mechanism of the fatigue is analyzed. Hard mask is used to reduce the size of the capacitors and damage caused in etching process. In our process, Al2O3 is developed as hard mask, which simplifies the FeRAM backend integration process.