High-precision pulsar timing observations are limited in their accuracy by the jitter noise that appears in the arrival time of pulses. Therefore, it is important to systematically characterise the amplitude of the jitter noise and its variation with frequency. In this paper, we provide jitter measurements from low-frequency wideband observations of PSR J0437$-$4715 using data obtained as part of the Indian Pulsar Timing Array experiment. We were able to detect jitter in both the 300–500 MHz and 1 260–1 460 MHz observations of the upgraded Giant Metrewave Radio Telescope (uGMRT). The former is the first jitter measurement for this pulsar below 700 MHz, and the latter is in good agreement with results from previous studies. In addition, at 300–500 MHz, we investigated the frequency dependence of the jitter by calculating the jitter for each sub-banded arrival time of pulses. We found that the jitter amplitude increases with frequency. This trend is opposite as compared to previous studies, indicating that there is a turnover at intermediate frequencies. It will be possible to investigate this in more detail with uGMRT observations at 550–750 MHz and future high-sensitive wideband observations from next generation telescopes, such as the Square Kilometre Array. We also explored the effect of jitter on the high precision dispersion measure (DM) measurements derived from short duration observations. We find that even though the DM precision will be better at lower frequencies due to the smaller amplitude of jitter noise, it will limit the DM precision for high signal-to-noise observations, which are of short durations. This limitation can be overcome by integrating for a long enough duration optimised for a given pulsar.

A novel excretory–secretory (ES) protein of Trichinella pseudospiralis was produced. A cDNA library was constructed from mRNA of muscle larvae at 30 days post infection (p.i.) and immunoscreened with the antibody against ES products. A clone, designated Tp22-3, contained a cDNA transcript of 815 bp in length with a single open reading frame which encoded 244-amino acids (28407 Da in the estimated molecular mass). A database search revealed that no sequences had a homology to this predicted protein. The recombinant protein was produced in an Escherichia coli expression system. Stage specific expression of this protein was suggested from the following experiments. An antibody against the recombinant protein could stain proteins migrating at about 28 kDa (which is the expected size from the sequence) on Western blotting of crude extracts or ES products from 30 days p.i. muscle larvae, but failed to stain any proteins in crude extracts from newborn larvae or 15 days p.i. muscle larvae. The antibody reacted to the stichocytes of larvae at 30 days p.i., but did not react to 15 days p.i. muscle larvae. The production of an mRNA transcript for Tp22-3 gene was restricted largely to the 30 days p.i. muscle larvae and adult worms.

Recombinant protein was produced from the cDNA library of Trichinella pseudospiralis, which seemed to form part of the excretory–secretory (ES) products. The library was constructed from cDNA of muscle larvae at 1 month post-infection, and immunoscreened with antibody against T. pseudospiralis ES products. A clone, designated Tp21-3, contained a cDNA transcript of 657 bp in length with a single open reading frame, which encoded 172 amino acids (19617 Da in the estimated molecular mass). The predicted amino acid sequence of clone Tp21-3 had a similarity of 76% to that of clone ORF 17.20 (GenBank under accession number U88239) from T. spiralis. The recombinant fusion proteins encoded by clone Tp21-3 were produced in an Escherichia coli expression system and affinity purified. On Western blotting analysis, Tp21-3 recombinant proteins migrated at 40 kDa and reacted to antibody against T. pseudospiralis ES products and T. pseudospiralis-infected sera. Sera were developed against Tp 21-3 recombinant proteins, which reacted to a single band migrating at 21 kDa in crude worm extract and ES products from T. pseudospiralis on Western blotting analysis, and reacted with stichocytes of T. pseudospiralis on immunohistochemical staining.

The nurse cell in the cyst of Trichinella spiralis comprises at least two kinds of cytoplasm, derived from muscle or satellite cells, as indicated by the pattern of staining using regular dye (haematoxylin and eosin, or toluidine blue), alkaline phosphatase (ALP) expression, acid phosphatase (ACP) expression and immunostaining with an anti-intermediate filament protein (desmin or keratin). Muscle cells undergo basophilic changes following a T. spiralis infection and transform to the nurse cells, accompanied by an increase in ACP activity and the disappearance of desmin. Satellite cells are activated, transformed and joined to the nurse cells but remain eosinophilic. The eosinophilic cytoplasm is accompanied by an increase in desmin and ALP expression but not an increase in ACP activity. Differences in the staining results for ALP or ACP suggest that the two kinds of cytoplasm have different functions. Trichinella pseudospiralis infection results in an increase of ACP activity at a later stage than T. spiralis. There is also a difference in the location pattern of ACP in the cyst of T. spiralis compared with T. pseudospiralis. In T. spiralis, ACP is diffused within the cell, but in T. pseudospiralis, ACP distribution is spotty corresponding to the location of the nucleus. Trichinella pseudospiralis infection is accompanied by a slight increase in ALP activity. Activated satellite cells following a T. pseudospiralis infection exhibit an increase in desmin expression. The present study therefore reveals that nurse cell cytoplasm differs between the two Trichinella species and between the two origins of cytoplasm in the cyst of T. spiralis.

A clone, designated as TsTM, was selected from the cDNA library of newborn larvae (NBL) of Trichinella spiralis through immunoscreening against infected sera. The clone contained a cDNA transcript of 855 bp in length with a single open reading frame, which encoded 285-amino acids (33 kDa in the estimated molecular weight). A sequence analysis revealed that the clone TsTM encoded the full-length of tropomyosin gene. The phylogenetic analysis of the tropomyosin gene was in good agreement with the classical taxonomical position of T. spiralis. The fusion proteins encoded by the clone TsTM were produced in an Escherichia coli expression system and affinity purified, and the antibody was raised against the protein for the following studies. The antibody against the fusion protein positively bound to the hypodermal muscle layer in immunolocalization analysis, and the 35 kDa band in crude extracts of muscle larvae but not in excretory and secretory (ES) products on Western blots. The antigenicity of the clone TsTM was recognized by host mice but exhibited little species specificity.

We present the pulse arrival times and high-precision dispersion measure estimates for 14 millisecond pulsars observed simultaneously in the 300 $-$ 500 MHz and 1260 $-$ 1460 MHz frequency bands using the upgraded Giant Metrewave Radio Telescope. The data spans over a baseline of 3.5 years (2018-2021), and is the first official data release made available by the Indian Pulsar Timing Array collaboration. This data release presents a unique opportunity for investigating the interstellar medium effects at low radio frequencies and their impact on the timing precision of pulsar timing array experiments. In addition to the dispersion measure time series and pulse arrival times obtained using both narrowband and wideband timing techniques, we also present the dispersion measure structure function analysis for selected pulsars. Our ongoing investigations regarding the frequency dependence of dispersion measures have been discussed. Based on the preliminary analysis for five millisecond pulsars, we do not find any conclusive evidence of chromaticity in dispersion measures. Data from regular simultaneous two-frequency observations are presented for the first time in this work. This distinctive feature leads us to the highest precision dispersion measure estimates obtained so far for a subset of our sample. Simultaneous multi-band upgraded Giant Metrewave Radio Telescope observations in 300 $-$ 500 MHz and 1260 $-$ 1460 MHz are crucial for high-precision dispersion measure estimation and for the prospect of expanding the overall frequency coverage upon the combination of data from the various Pulsar Timing Array consortia in the near future. Parts of the data presented in this work are expected to be incorporated into the upcoming third data release of the International Pulsar Timing Array.

With an annual growth in travel demand of about 5% globally, managing the environmental impact is a challenge. In 2019, the International Civil Aviation Organisation (ICAO) issued emission reduction targets, including well-to-wake greenhouse gas (GHG) emissions reduced at least 50% from 2005 levels by 2050. This discusses several technologies from an aircraft design perspective that can contribute to achieving these targets. One thing is certain: aircraft will look different in the future. The Transonic Truss-Braced Wing and Flying V configurations are promising significant efficiency improvements over conventional configurations. Electric propulsion, in various architectures, is becoming a feasible option for general aviation and commuter aircraft. It will be a growing field of aviation with zero-emissions flight and opportunities for special missions. Lastly, this paper discusses methods and design processes that include all relevant disciplines to ensure that the aircraft is optimised as a complete system. While empirical methods are essential for initial design, Multidisciplinary Design Optimisation (MDO) incorporates models and simulations integrated in an optimisation environment to capture critical trade-offs. Concurrent design places domain experts in one site to facilitate collaboration, interaction, and joint decision-making, and to ensure all disciplines are equally considered. It is supported by a Collaborative Design Facility (CDF), an information technology facility with connected hardware and software tools for design analysis.

In the present study, compressible low-Reynolds-number flow past a stationary isolated sphere was investigated by direct numerical simulations of the Navier–Stokes equations using a body-fitted grid with high-order schemes. The Reynolds number based on free-stream quantities and the diameter of the sphere was set to be between 250 and 1000, and the free-stream Mach number was set to be between 0.3 and 2.0. As a result, it was clarified that the wake of the sphere is significantly stabilized as the Mach number increases, particularly at the Mach number greater than or equal to 0.95, but turbulent kinetic energy at the higher Mach numbers conditions is higher than that at the lower Mach numbers conditions of similar flow regimes. A rapid extension of the length of the recirculation region was observed under the transitional condition between the steady and unsteady flows. The drag coefficient increases as the Mach number increases mainly in the transonic regime and its increment is almost due to the increment in the pressure component. In addition, the increment in the drag coefficient is approximately a function of the Mach number and independent of the Reynolds number in the continuum regime. Moreover, the effect of the Mach and Reynolds numbers on the flow properties such as the drag coefficient and flow regime can approximately be characterized by the position of the separation point.

Recent research on Flight-deck Interval Management (FIM), a modern technology for increasing safety and improving airspace and runway utilisation through self-spacing, has led to the development of a new rule-based logic for FIM, namely Interval Management – Speed Planning (IM-SP). In an initial benchmark study, IM-SP showed good spacing performance with a significant reduction in speed commands, a major area of concern with previous FIM logics, resulting in a lower burden on the flight crew during FIM operation. Nevertheless, there remains scope for improvement in other aspects, such as fuel burn. In this study, the internal cost function of IM-SP is further analysed and optimised using speed-constrained multi-objective particle swarm optimisation to improve the performance of IM-SP under the multiple objectives of FIM. The optimisation renders new settings that address the problem areas, improve the speed commands and enhance the overall quality of IM-SP. Two distinctive solutions, viz. a spacing performance optimised setting and a fuel burn optimised setting, are further analysed and discussed, and directions for follow-up research are explored.

Studies on community-acquired pneumonia (CAP) and pneumococcal pneumonia (PP) related to the 13-valent pneumococcal conjugate vaccine (PCV13) introduction in Asia are scarce. This study aimed to investigate the epidemiological and microbiological determinants of hospitalised CAP and PP after PCV13 was introduced in Japan. This observational hospital-based surveillance study included children aged ⩽15 years, admitted to hospitals in and around Chiba City, Japan. Participants had bacterial pneumonia based on a positive blood or sputum culture for bacterial pathogens. Serotype and antibiotic-susceptibility testing of Streptococcus pneumoniae and Haemophilus influenzae isolates from patients with bacterial pneumonia were assessed. The CAP hospitalisation rate per 1000 child-years was 17.7, 14.3 and 9.7 in children aged <5 years and 1.18, 2.64 and 0.69 in children aged 5–15 years in 2008, 2012 and 2018, respectively. There was a 45% and 41% reduction in CAP hospitalisation rates, between the pre-PCV7 and PCV13 periods, respectively. Significant reductions occurred in the proportion of CAP due to PP and PCV13 serotypes. Conversely, no change occurred in the proportion of CAP caused by H. influenzae. The incidence of hospitalised CAP in children aged ⩽15 years was significantly reduced after the introduction of PCV13 in Japan. Continuous surveillance is necessary to detect emerging PP serotypes.

The Murchison Widefield Array (MWA) is an open access telescope dedicated to studying the low-frequency (80–300 MHz) southern sky. Since beginning operations in mid-2013, the MWA has opened a new observational window in the southern hemisphere enabling many science areas. The driving science objectives of the original design were to observe 21 cm radiation from the Epoch of Reionisation (EoR), explore the radio time domain, perform Galactic and extragalactic surveys, and monitor solar, heliospheric, and ionospheric phenomena. All together $60+$ programs recorded 20 000 h producing 146 papers to date. In 2016, the telescope underwent a major upgrade resulting in alternating compact and extended configurations. Other upgrades, including digital back-ends and a rapid-response triggering system, have been developed since the original array was commissioned. In this paper, we review the major results from the prior operation of the MWA and then discuss the new science paths enabled by the improved capabilities. We group these science opportunities by the four original science themes but also include ideas for directions outside these categories.

Flight-deck Interval Management (FIM) is a modern airborne self-spacing technology that improves arrival route throughput and runway utilisation and increases hourly arrival capacity by up to four aircraft per hour and per runway, compared to conventional air traffic controller guided arrivals. The National Aeronautics and Space Administration (NASA) has been the leader in FIM research and formulated a logic that was put to an actual flight test in 2017. Despite the overall success of the project, operational deficiencies concerning the number of speed commands, which led to several recommendations for future research before operational implementation, were discovered. In this study, a new logic that implements a two-stage rule-based selection algorithm was developed to overcome those deficiencies. The proposed logic was compared to NASA’s logic on an arrival in Tokyo International Airport with multiple induced error patterns. The results indicate that the new logic significantly decreases the number of speed commands with only minor aggravations in spacing performance. The results that highlight the strengths and weaknesses of both concepts are discussed, and an outlook on and ideas for future research on FIM and the proposed logic are presented.