This study presents zircon U–Pb geochronology and Hf and O isotope data for granitic rocks in the Zijinshan ore field, southwestern Fujian Province, China. The intrusive rocks comprise monzogranite, granite and granodiorite. The magmatic zircon U–Pb ages from these granitic rocks can be divided into four episodes: episodes 1 (157.9–159.9 Ma) and 2 (141 Ma) in the Late Jurassic and episodes 3 (108.1–103.2 Ma) and 4 (97.5–99.7 Ma) in the Middle and Late Cretaceous, respectively. Patterns of rare-earth elements (REE) show enrichment in light REE and obvious negative Eu anomalies. These rocks are also enriched in Rb, Th, U, La, Ce, Nd and Hf, and depleted in Ba, Nb, Sr, P and Ti. The increasing La/Yb ratio and decreasing heavy REE content with decreasing age may imply an increasing contribution of mantle-derived materials from the Late Jurassic to Cretaceous. The zircon ϵHf(t) and δ18O values, ranging from −37.7 to −2.8 and 12.0 ‰ to 6.3 ‰, respectively, indicate that the lower crust is an important source of granitic rocks. There was a significant increase in ϵHf(t) values and a decrease in δ18O values in the younger magmatic episodes (3 and 4), which ranged from −11.4 to −0.6 and 10.7 to 6.3 ‰, respectively. This suggests an increasing contribution of mantle-derived magma to the crustal melts from the Late Jurassic to late Early Cretaceous in response to the changing regional tectonic setting from compression to extension and an increasing interaction between the crust and mantle.

In this work, an all-fiberized and narrow-linewidth fiber amplifier with record output power and near-diffraction-limited beam quality is presented. Up to 6.12 kW fiber laser with the conversion efficiency of approximately 78.8% is achieved through the fiber amplifier based on a conventional step-index active fiber. At the maximum output power, the 3 dB spectral linewidth is approximately 0.86 nm and the beam quality factor is Mx2 = 1.43, My2 = 1.36. We have also measured and compared the output properties of the fiber amplifier employing different pumping schemes. Notably, the practical power limit of the fiber amplifier could be estimated through the maximum output powers of the fiber amplifier employing unidirectional pumping schemes. Overall, this work could provide a good reference for the optimal design and potential exploration of high-power narrow-linewidth fiber laser systems.

The extinct family Hylicellidae, as the ancestral group of modern cicadomorphans, had a wide distribution and a very high species-level biodiversity from the Triassic to Early Cretaceous. We herein report 11 new hylicellid specimens from the Jurassic Daohugou beds of Inner Mongolia, NE China, and execute geometric morphometric analysis (GMA) to elucidate their systematic position. Our GMA and subsequent morphometric statistics indicate that 10 of our new specimens can be compared to the holotype of Cycloscytina gobiensis, and one is new to science. Cycloscytina incompleta new species is erected based on this specimen, with the following discriminatory tegminal traits: C3 almost as long as and slightly narrower than C2, and the forking position of stem M distinctly migrates towards wing apex and much apicad of the stem CuA bifurcating. Additionally, Cycloscytina plachutai is herein transferred to the procercopid genus Procercopina, resulting in P. plachutai new combination. To date, just a few body structures of Hylicellidae have been revealed, and the new whole-bodied hylicellids reported herein provide some novel insights on the evolution of basal Clypeata. This study also emphasizes the use of morphometric analysis in the systematics of wing-bearing insects such as hylicellids.

UUID: http://zoobank.org/84a67eba-9b7c-4e27-a436-764802c4cdfb.

Temperature strongly impacts the rates of physiological and biochemical processes, which in turn can determine the survival and population size of insects. At low temperatures performance is limited, however, cold tolerance and performance at low temperature can be improved after short- or long-term acclimation in many insect species. To understand mechanisms underlying acclimation, we sequenced and compared the transcriptome of the blowfly Chrysomya megacephala under rapid cold hardening (RCH) and long-term cold acclimation (LCA) conditions. The RCH response was dominated by genes related to immune response, spliceosome, and protein processing in endoplasmic reticulum with up-regulation during recovery from RCH. In contrast, LCA was associated with genes related to carbohydrate metabolism and cytoskeleton branching and stabilizing. Meanwhile, mRNA levels of genes related to glycerophospholipid metabolism, and some heat shock proteins (Hsps) were collectively up-regulated by both RCH and LCA. There were more genes and pathway adjustments associated with LCA than RCH. Overall, the transcriptome data provide basic information of molecular mechanisms underpinning the RCH and LCA response. The partly independent molecular responses to RCH and LCA suggest that several avenues for manipulating cold performance exist and RCH might be more effective as it only triggers fewer genes and affects the general metabolisms less. These observations provide some appropriate methods to improve cold tolerance of C. megacephala, and hold promise for developing an extended use of mass-reared C. megacephala with better cold performance as a pollinator of crops at low temperatures.

Celestial navigation is an important means of maritime navigation; it can automatically achieve inertially referenced positioning and orientation after a long period of development. However, the impact of different accuracy of observations and the influence of nonstationary states, such as ship speed change and steering, are not taken into account in existing algorithms. To solve this problem, this paper proposes an adaptively robust maritime celestial navigation algorithm, in which each observation value is given an equivalent weight according to the robust estimation theory, and the dynamic balance between astronomical observation and prediction values of vessel motion is adjusted by applying the adaptive factor. With this system, compared with the frequently used least square method and extended Kalman filter algorithm, not only are the real-time and high-precision navigation parameters, such as position, course, and speed for the vessel, calculated simultaneously, but also the influence of abnormal observation and vessel motion status change could be well suppressed.

As threats to biodiversity proliferate, establishment and expansion of protected areas have increasingly been advocated in recent decades. In establishing a network of protected areas, recurrent assessments of the biodiversity conservation actually afforded by these areas is required. Gap analysis has been useful to evaluate the sufficiency and performance of protected areas. We surveyed Reeves’s Pheasant Syrmaticus reevesii populations in 2018–2019 across its distribution range in central China to quantify the distribution of habitat suitable for this species. Our goal was to ascertain the current distribution of Reeves’s Pheasant and then identify the gaps in protecting Reeves’s Pheasant of the existing national nature reserve (NNR) network to provide suggestions for improving the conservation of this important species. The existing NNR network encompassed only 17.0% of the habitat suitable for Reeves’s Pheasant. Based on the current distributions of both suitable habitat and NNRs for Reeves’s Pheasant, we suggest most currently unprotected areas comprised moderately suitable habitat for species and should be prioritized in the future. A multiple species approach using Reeves’s Pheasant as a flagship species should be considered to understand the extent of mismatch between the distributions of protected areas and suitable habitat to improve the management effectiveness of NNRs. This case study provides an example of how the development of a conservation reserve network may be based on species distribution and habitat assessments and is useful to conservation efforts in other regions and for other species.

Steam jet milling was applied for the first time to ultra-fine grind the filter cake (moisture content 23.80%) produced by a kaolin concentrator. The material was dehydrated and dried simultaneously during grinding, and the final ground sample met the moisture content requirement for powder products of <2%. The particle size of the ground kaolin samples decreased and the particle-size distribution was more concentrated, indicating that the steam jet milling was more effective for kaolin processing than the conventional dry grinding process. In addition, steam jet milling can improve the whiteness and decrease the crystal order of the samples, thus improving the kaolin properties in follow-up applications.

Spatial profiles of impurity emission measurements in the extreme ultraviolet (EUV) spectroscopic range in radiofrequency (RF)-heated discharges are combined with one-dimensional and three-dimensional transport simulations to study the effects of resonant magnetic perturbations (RMPs) on core impurity accumulation at EAST. The amount of impurity line emission mitigation by RMPs appears to be correlated with the ion Z for lithium, carbon, iron and tungsten monitored, i.e. stronger suppression of accumulation for heavier ions. The targeted effect on the most detrimental high-Z impurities suggests a possible advantage using RMPs for impurity control. Profiles of transport coefficients are calculated with the STRAHL one-dimensional impurity transport code, keeping $\nu /D$ fixed and using the measured spatial profiles of $\textrm{F}{\textrm{e}^{20 + }}$, $\textrm{F}{\textrm{e}^{21 + }}$ and $\textrm{F}{\textrm{e}^{22 + }}$ to disentangle the transport coefficients. The iron diffusion coefficient ${D_{\textrm{Fe}}}$ increases from $1.0- 2.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ to $1.5- 3.0\;{\textrm{m}^2}\;{\textrm{s}^{ - 1}}$ from the core region to the edge region $(\rho \gt 0.5)$ after the onset of RMPs. Meanwhile, an inward pinch of iron convective velocity ${\nu _{\textrm{Fe}}}$ decreases in magnitude in the inner core region and increases significantly in the outer confined region, simultaneously contributing to preserving centrally peaked $\textrm{Fe}$ profiles and exhausting the impurities. The ${D_{\textrm{Fe}}}$ and ${\nu _{\textrm{Fe}}}$ variations lead to reduced impurity contents in the plasma. The three-dimensional edge impurity transport code EMC3-EIRENE was also applied for a case of RMP-mitigated high-Z accumulation at EAST and compared to that of low-Z carbon. The exhaust of ${\textrm{C}^{6 + }}$ toward the scrape-off layer accompanying an overall suppression of heavier ${\textrm{W}^{30 + }}$ is observed when using RMPs.

Lipopolysaccharides (LPS) could induce milk fat depression via regulating the body and blood fat metabolism. However, it is not completely clear how LPS might regulate triglyceride synthesis in dairy cow mammary epithelial cells (DCMECs). DCMECs were isolated and purified from dairy cow mammary tissue and treated with LPS. The level of triglyceride synthesis, the expression and activity of the liver X receptor α (LXRα), enzymes related to de novo fatty acid synthesis, and the expression of the fatty acid transporters were investigated. We found that LPS decreased the level of triglyceride synthesis via a down-regulation of the transcription, translation, and nuclear translocation level of the LXRα. The results also indicated that the transcription level of the LXRα target genes, sterol regulatory element binding protein 1 (SREBP1), fatty acid synthetase (FAS), acetyl-CoA carboxylase-1 (ACC1), were significantly down-regulated in DCMECs after LPS treatment. Our data may provide new insight into the mechanisms of milk fat depression caused by LPS.

The Coronavirus Disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a public health emergency of international concern. The current study aims to explore whether the neutrophil-to-lymphocyte ratio (NLR) and platelet-to-lymphocyte ratio (PLR) are associated with the development of death in patients with COVID-19. A total of 131 patients diagnosed with COVID-19 from 13 February 2020 to 14 March 2020 in a hospital in Wuhan designated for treating COVID-19 were enrolled in the current study. These 131 patients had a median age of 64 years old (interquartile range: 56–71 years old). Furthermore, among these patients, 111 (91.8%) patients were discharged and 12 (9.2%) patients died in the hospital. The pooled analysis revealed that the NLR at admission was significantly elevated for non-survivors, when compared to survivors (P < 0.001). The NLR of 3.338 was associated with all-cause mortality, with a sensitivity of 100.0% and a specificity of 84.0% (area under the curve (AUC): 0.963, 95% confidence interval (CI) 0.911–1.000; P < 0.001). In view of the small number of deaths (n = 12) in the current study, NLR of 2.306 might have potential value for helping clinicians to identify patients with severe COVID-19, with a sensitivity of 100.0% and a specificity of 56.7% (AUC: 0.729, 95% CI 0.563–0.892; P = 0.063). The NLR was significantly associated with the development of death in patients with COVID-19. Hence, NLR is a useful biomarker to predict the all-cause mortality of COVID-19.

The development of thermoelectric measurement technology at nanoscale is a challenging task. Here, a novel MEMS-based dual temperature control (DTC) measurement method for thermoelectric properties of individual nanowires was proposed. Different from conventional thermal bridge testing devices, this DTC thermoelectric testing device can obtain the thermoelectric properties by independently control ambient temperature and temperature difference between two ends of the nanowires through two separate resistance thermometers without auxiliary heating devices. The reliability of the model and the testing accuracy were verified by accurately measuring the thermal conductivity, electrical conductivity, and the absolute value of the Seebeck coefficient of VO2 nanowires.

This paper investigates the electromechanical behavior of functionally graded piezoelectric composite beams containing axially functionally graded (AFG) beam and piezoelectric actuators subjected to electrical load. The mechanical properties of the AFG beam are assumed to be graded along the axial direction. Employing the electromechanical coupling theory and load simulation method, the expression for the simulation load of the piezoelectric actuators is obtained. Based on Euler-Bernoulli beam theory and the obtained simulation load, the differential governing equation of the piezoelectric composite beams subjected to electrical load is derived. The integration-by-parts approach is utilized to solve the differential governing equation, and the expression for the deflection of the piezoelectric composite beams is obtained. The accuracy of the proposed method is validated by the finite element method. The bending response of the functionally graded piezoelectric composite beams is investigated through the proposed method. In the numerical examples, the effects of electrical load, actuator thickness, AFG beam thickness and AFG beam length on the electromechanical behavior of the functionally graded piezoelectric composite beams are studied.

For a wide range of insect species, the microbiota has potential roles in determining host developmental programme, immunity and reproductive biology. The tea geometrid moths Ectropis obliqua and E. grisescens are two closely related species that mainly feed on tea leaves. Although they can mate, infertile hybrids are produced. Therefore, these species provide a pair of model species for studying the molecular mechanisms of microbiotal involvement in host reproductive biology. In this study, we first identified and compared the compositions of microbiota between these sibling species, revealing higher microbiotal diversity for E. grisescens. The microbiota of E. obliqua mainly comprised the phyla Firmicutes, Proteobacteria and Cyanobacteria, whereas that of E. grisescens was dominated by Proteobacteria, Actinobacteria and Firmicutes. At the genus level, the dominant microbiota of E. grisescens included Wolbachia, Enterobacter and Pseudomonas and that of E. obliqua included Melissococcus, Staphylococcus and Enterobacter. Furthermore, we verified the rate of Wolbachia to infect 80 samples from eight different geographical populations, and the results supported that only E. grisescens harboured Wolbachia. Taken together, our findings indicate significantly different microbiotal compositions for E. obliqua and E. grisescens, with Wolbachia possibly being a curial factor influencing the reproductive isolation of these species. This study provides new insight into the mechanisms by which endosymbiotic bacteria, particularly Wolbachia, interact with sibling species.

It is urgent to develop new antimalarial drugs with good therapeutic effects to address the emergence of drug resistance. Here, the artelinic acid-choline derivative (AD) was synthesized by dehydration reaction and esterification reaction, aimed to avoid the emergence of drug resistance by synergistic effect of artemisinins and choline derivative, which could compete with choline for rate-limiting enzymes in the phosphatidylcholine (PC) biosynthetic pathway. AD was formulated into liposomes (ADLs) by the thin-film hydration method. Efficacy of ADLs was evaluated by Peters 4-day suppression test. The suppression percentage against Plasmodium yoelii BY265 (PyBY265) in ADLs group was higher than those of positive control groups (dihydroartemisinin liposomes, P < 0.05) and other control groups (P ⩽ 0.05) at the doses of 4.4, 8.8, 17.6 µmol (kg·d)−1, respectively. The negative conversion fraction, recrudescence fraction and survival fraction of ADLs group were superior to other control groups. Pharmacokinetics in rats after intravenous injection suggested that ADLs exhibited higher exposure levels (indexed by area under concentration-time curve) than that of AD solution, artelinic acid liposomes or artelinic acid solution (P < 0.01). Taken together, ADLs exhibited promising antimalarial efficacy and pharmacokinetic characteristics.

The plasma in the scrape-off layer (SOL) has an important effect on the coupling of the waves in the ion cyclotron range of frequencies (ICRF). The high-frequency B-dot (HFB) probes have been installed to investigate the behaviour of ICRF waves on EAST. The fast and slow ICRF wave field amplitudes are measured and a domain parallel wavenumber is deduced. Results of measurements on a test experimental platform and EAST experiments are presented, which include vacuum and plasma situations. In vacuum it is found that field amplitudes increase linearly with ICRF power. Besides, during plasma operation, field amplitudes measured were decreased by an order of magnitude and no linear relation with power was observed. Fast and slow wave power densities fluctuate strongly with plasma density. The experimental results in the laboratory coincide with the simulation results and allow for validating of the measurement method.