To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure firstname.lastname@example.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Although there is robust evidence linking childhood adversities (CAs) and an increased risk for psychotic experiences (PEs), little is known about whether these associations vary across the life-course and whether mental disorders that emerge prior to PEs explain these associations.
We assessed CAs, PEs and DSM-IV mental disorders in 23 998 adults in the WHO World Mental Health Surveys. Discrete-time survival analysis was used to investigate the associations between CAs and PEs, and the influence of mental disorders on these associations using multivariate logistic models.
Exposure to CAs was common, and those who experienced any CAs had increased odds of later PEs [odds ratio (OR) 2.3, 95% confidence interval (CI) 1.9–2.6]. CAs reflecting maladaptive family functioning (MFF), including abuse, neglect, and parent maladjustment, exhibited the strongest associations with PE onset in all life-course stages. Sexual abuse exhibited a strong association with PE onset during childhood (OR 8.5, 95% CI 3.6–20.2), whereas Other CA types were associated with PE onset in adolescence. Associations of other CAs with PEs disappeared in adolescence after adjustment for prior-onset mental disorders. The population attributable risk proportion (PARP) for PEs associated with all CAs was 31% (24% for MFF).
Exposure to CAs is associated with PE onset throughout the life-course, although sexual abuse is most strongly associated with childhood-onset PEs. The presence of mental disorders prior to the onset of PEs does not fully explain these associations. The large PARPs suggest that preventing CAs could lead to a meaningful reduction in PEs in the population.
During 1990 we surveyed the southern sky using a multi-beam receiver at frequencies of 4850 and 843 MHz. The half-power beamwidths were 4 and 25 arcmin respectively. The finished surveys cover the declination range between +10 and −90 degrees declination, essentially complete in right ascension, an area of 7.30 steradians. Preliminary analysis of the 4850 MHz data indicates that we will achieve a five sigma flux density limit of about 30 mJy. We estimate that we will find between 80 000 and 90 000 new sources above this limit. This is a revised version of the paper presented at the Regional Meeting by the first four authors; the surveys now have been completed.
The Ultra-Fast Flash Observatory (UFFO) is a space observatory for optical follow-ups of
gamma ray bursts (GRBs), aiming to explore the first 60 seconds of GRBs optical emission.
UFFO is utilized to catch early optical emissions from GRBs within few sec after trigger
using a Gimbal mirror which redirects the optical path rather than slewing entire
spacecraft. We have developed a 15 cm two-axis Gimbal mirror stage for the UFFO-Pathfinder
which is going to be on board the Lomonosov satellite which is to be launched in 2013. The
stage is designed for fast and accurate motion with given budgets of 3 kg of mass and 3
Watt of power. By employing stepping motors, the slewing mirror can rotate faster than 15
deg/sec so that objects in the UFFO coverage (60 deg × 60 deg) can be targeted in
~1 sec. The obtained targeting resolution is better 2 arcmin using a close-loop
control with high precision rotary encoder. In this presentation, we will discuss details
of design, manufacturing, space qualification tests, as well as performance tests.
The UFFO (Ultra-Fast Flash Observatory) is a GRB detector on board the Lomonosov
satellite, to be launched in 2013. The GRB trigger is provided by an X-ray detector,
called UBAT (UFFO Burst Alarm & Trigger Telescope), which detects X-rays from the GRB
and then triggers to determine the direction of the GRB and then alerts the Slewing Mirror
Telescope (SMT) to turn in the direction of the GRB and record the optical photon fluxes.
This report details the calibration of the two components: the MAPMTs and the YSO crystals
and simulations of the UBAT. The results shows that this design can observe a GRB within a
field of view of ±35° and can trigger in a time scale as short as 0.2 – 1.0 s
after the appearance of a GRB X-ray spike.
One of the key aspects of the upcoming Ultra-Fast Flash Observatory (UFFO) pathfinder for
Gamma Ray Bursts (GRBs) identification is the UFFO Burst Alert & Trigger Telescope
(UBAT). The scientific propose of UBAT is to detect and locate as fast as possible the
GRBs in the sky. This is achieved by using a coded mask aperture camera scheme with a wide
field of view (FOV) and selecting a X-ray detector of high quantum efficiency and large
detection area. This X-ray detector of high quantum efficiency and large detection area is
called the UBAT detector. The UBAT detector consists of 48 × 48 Yttrium Oxyorthosilicate
(YSO) scintillator crystal arrays and Multi Anode Photomultiplier Tubes (MAPMTs), analog
electronics equipped with ASIC chips, digital electronics equipped with Field Programmable
Gate Array (FPGA) chips, and a mechanical structure that supports all components of the
UBAT detector. The total number of the pixels in the UBAT detector is 2304, and the total
effective detection area is 191 cm2. We will present the design and
construction, and performance of the UBAT detector including the responses of the UBAT
detector to X-ray sources.
The Ultra-Fast Flash Observatory (UFFO) aims to detect the earliest moment of Gamma-Ray
Bursts (GRBs) which is not well known, resulting into the enhancement of GRB mechanism
understanding. The pathfinder mission was proposed to be a scaled-down version of UFFO,
and only contains the UFFO Burst Alert & Trigger Telescope (UBAT) measuring the
X-ray/gamma-ray with the wide-field of view and the Slewing Mirror Telescope (SMT) with a
rapid-response for the UV/optical photons. Once the UBAT detects a GRB candidate with the
position accuracy of 10 arcmin, the SMT steers the UV/optical photons from the candidate
to the telescope by the fast rotatable mirror and provides the early UV/optical photons
measurements with 4 arcsec accuracy. The SMT has a modified Ritchey-Chrètien telescope
with the aperture size of 10 cm diameter including the rotatable mirror and the image
readout by the intensified charge-coupled device. There is a key board called the UFFO
Data Acquisition system (UDAQ) that manages the communication of each telescope and also
of the satellite and the UFFO overall operation. This pathfinder is designed and built
within the limited size and weight of ~20 kg and the low power consumption up to
~30 W. We will discuss the design and performance of the UFFO-pathfinder, and its
integration to the Lomonosov satellite.
The Ultra-Fast Flash Observatory (UFFO), which will be launched onboard the
Lomonosov spacecraft, contains two crucial instruments: UFFO Burst
Alert & Trigger Telescope (UBAT) for detection and localization of Gamma-Ray Bursts
(GRBs) and the fast-response Slewing Mirror Telescope (SMT) designed for the observation
of the prompt optical/UV counterparts. Here we discuss the in-space calibrations of the
UBAT detector and SMT telescope. After the launch, the observations of the standard X-ray
sources such as pulsar in Crab nebula will provide data for necessary calibrations of
UBAT. Several standard stars will be used for the photometric calibration of SMT. The
celestial X-ray sources, e.g. X-ray binaries with bright optical sources
in their close angular vicinity will serve for the cross-calibration of UBAT and SMT.
The Ultra-Fast Flash Observatory (UFFO) Pathfinder for Gamma-Ray Bursts (GRBs) consists
of two telescopes. The UFFO Burst Alert & Trigger Telescope (UBAT) handles the
detection and localization of GRBs, and the Slewing Mirror Telescope (SMT) conducts the
measurement of the UV/optical afterglow. UBAT is equipped with an X-ray detector, analog
and digital signal readout electronics that detects X-rays from GRBs and determines the
location. SMT is equipped with a stepping motor and the associated electronics to rotate
the slewing mirror targeting the GRBs identified by UBAT. First the slewing mirror points
to a GRB, then SMT obtains the optical image of the GRB using the intensified CCD and its
readout electronics. The UFFO Data Acquisition system (UDAQ) is responsible for the
overall function and operation of the observatory and the communication with the satellite
main processor. In this paper we present the design and implementation of the electronics
of UBAT and SMT as well as the architecture and implementation of UDAQ.
One of the unexplored domains in the study of gamma-ray bursts (GRBs) is the early time
phase of the optical light curve. We have proposed Ultra-Fast Flash Observatory (UFFO) to
address this question through extraordinary opportunities presented by a series of small
space missions. The UFFO is equipped with a fast-response Slewing Mirror Telescope that
uses a rapidly moving mirror or mirror array to redirect the optical beam rather than
slewing the entire spacecraft or telescope to aim the optical instrument at the GRB
position. The UFFO will probe the early optical rise of GRBs with sub-second response, for
the first time, opening a completely new frontier in GRB and transient studies. Its fast
response measurements of the optical emission of dozens of GRB each year will provide
unique probes of the burst mechanism and test the prospect of GRB as a new standard
candle, potentially opening up the z > 10 universe. We describe the current limit in
early photon measurements, the aspects of early photon physics, our soon-to-be-launched
UFFO-pathfinder mission, and our next planned mission, the UFFO-100.
The Ultra-Fast Flash Observatory (UFFO) is a space mission to detect the early moments of an explosion from Gamma-ray bursts (GRBs), thus enhancing our understanding of the GRB mechanism. It consists of the UFFO Burst & Trigger telescope (UBAT) for the recognition of GRB positions using hard X-ray from GRBs. It also contains the Slewing Mirror Telescope (SMT) for the fast detection of UV-optical photons from GRBs. It is designed to begin the UV-optical observations in less than a few seconds after the trigger. The UBAT is based on a coded-mask X-ray camera with a wide field of view (FOV) and is composed of the coded mask, a hopper and a detector module. The SMT has a fast rotatable mirror which allows a fast UV-optical detection after the trigger. The telescope is a modified Ritchey-Chrétien telescope with the aperture size of 10 cm diameter, and an image intensifier readout by CCD. The UFFO pathfinder is scheduled to launch into orbit on 2012 June by the Lomonosov spacecraft. It is a scaled-down version of UFFO in order to make the first systematic study of early UV/optical light curves, including the rise phase of GRBs. We expect UBAT to trigger ~44 GRBs/yr and expect SMT to detect ~10 GRBs/yr.
This paper reports on the structures and properties of Y1Ba2Cu3O9−x samples prepared in precisely controlled oxygen environments using a solid-state ionic technique. By titrating out oxygen at low temperatures, orthorhombic Y1Ba2Cu3O9−x samples were prepared with oxygen contents below 6.50. Resistivity and magnetometry studies indicated that these reduced, orthorhombic samples were marginally superconducting, with their superconductivity probably arising from local regions of higher oxygen content.
Total internal reflection (TIR) holographic lithography is studied as a new method for field emitter array (FEA) fabrication. Four basic parameters of the process - scan speed, laser power, focus distance and step distance, are analyzed to optimize the hole patterns. In addition, the characteristics of the Aluminum (Al) parting layer are studied to minimize the stress produced by Molybdenum (Mo) layer during Spindt-type tip formation process.
The case notes of 185 patients who had bismuth-iodoform-paraffin paste (BIPP) impregnated ribbon gauze used for packing following ear surgery were analysed retrospectively. The incidence of hypersensitive allergic reactions to BIPP was 5.9 per cent and a five-fold increase risk of developing allergic reactions was found in those with previous exposure to BIPP. Where temporalis fascia was used to repair tympanic membrane defects, the incidence of tympanic membrane graft perforations was higher when allergic reactions to BIPP developed post-operatively, compared to non-allergic cases.
Email your librarian or administrator to recommend adding this to your organisation's collection.