To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
The pig industry faces many animal welfare issues. Among these, biting behaviour has a high incidence. It is indicative of an existing problem in biters and is a source of physical damage and psychological stress for the victims. We categorize this behaviour into aggressive and non-aggressive biting, the latter often being directed towards the tail. This review focusses specifically on predisposing factors in early life, comprising the prenatal and postnatal periods up to weaning, for the expression of aggressive and non-aggressive biting later in life. The influence of personality and coping style has been examined in a few studies. It varies according to these studies and, thus, further evaluation is needed. Regarding the effect of environmental factors, the number of scientific papers is low (less than five papers for most factors). No clear influence of prenatal factors has been identified to date. Aggressive biting is reduced by undernutrition, cross-fostering and socialization before weaning. Non-aggressive biting is increased by undernutrition, social stress due to competition and cross-fostering. These latter three factors are highly dependent on litter size at birth. The use of familiar odours may contribute to reducing biting when pigs are moved from one environment to another by alleviating the level of stress associated with novelty. Even though the current environment in which pigs are expressing biting behaviours is of major importance, the pre-weaning environment should be optimized to reduce the likelihood of this problem.
Experiments were performed within Sandia National Labs’ Multiphase Shock Tube to measure and quantify the shock-induced dispersal of a shock/dense particle curtain interaction. Following interaction with a planar travelling shock wave, schlieren imaging at 75 kHz was used to track the upstream and downstream edges of the curtain. Data were obtained for two particle diameter ranges (
) across Mach numbers ranging from 1.24 to 2.02. Using these data, along with data compiled from the literature, the dispersion of a dense curtain was studied for multiple Mach numbers (1.2–2.6), particle sizes (
) and volume fractions (9–32 %). Data were non-dimensionalized according to two different scaling methods found within the literature, with time scales defined based on either particle propagation time or pressure ratio across a reflected shock. The data show that spreading of the particle curtain is a function of the volume fraction, with the effectiveness of each time scale based on the proximity of a given curtain’s volume fraction to the dilute mixture regime. It is seen that volume fraction corrections applied to a traditional particle propagation time scale result in the best collapse of the data between the two time scales tested here. In addition, a constant-thickness regime has been identified, which has not been noted within previous literature.
Dry permafrost - ground with temperature always below 0°C and containing negligible ice - overlying ice-cemented ground has been reported in the Dry Valleys of Antarctica and on Mars. Here we report on a new site (79°49.213'S, 83°18.860'W, 718 m elevation) located on the side of Mount Dolence in Ellsworth Land, Antarctica. Year-round temperature and humidity measurements indicate that dry permafrost is present between depths of 13.5 and 49.0 cm - the location of ice-cemented ground. The mean annual frost point of the ice-cemented ground is -17.0 ± 0.2°C and the mean annual frost point of the atmosphere is -22.7 ± 1°C. The corresponding mean annual temperatures are -19.2°C and -20.3°C. Neither the temperature of the ice-cemented ground nor the air rise above freezing. Both the dry permafrost and the ice table may be habitable. In the dry soil at 3 cm depth there are 80 hours in the summer when temperature exceeds -5°C and water activity exceeds 0.8. At the ice table, temperature exceeds -10°C and water activity exceeds 0.8 for 35 hours in the year. The ice table and the dry permafrost above it would be considered a ‘Special Region’ on Mars. Further microbial investigation of this site is indicated.
A method for studying weakly nonlinear acoustic propagation in two-dimensional ducts of general shape – including curvature and variable width – is presented. The method is based on a local modal decomposition of the pressure and velocity in the duct. A pair of nonlinear ordinary differential equations for the modal amplitudes of the pressure and velocity modes is derived. To overcome the inherent instability of these equations, a nonlinear admittance relation between the pressure and velocity modes is presented, introducing a novel ‘nonlinear admittance’ term. Appropriate equations for the admittance are derived which are to be solved through the duct, with a radiation condition applied at the duct exit. The pressure and velocity are subsequently found by integrating an equation involving the admittance through the duct. The method is compared, both analytically and numerically, against published results and the importance of nonlinearity is demonstrated in ducts of complex geometry. Comparisons between ducts of differing geometry are also performed to illustrate the effect of geometry on nonlinear sound propagation. A new ‘nonlinear reflectance’ term is introduced, providing a more complete description of acoustic reflection that also takes into account the amplitude of the incident wave.
To examine the association between parenting styles and overall child dietary quality within households that are low-income and food-insecure.
Child dietary intake was measured via a 24 h dietary recall. Dietary quality was assessed using the Healthy Eating Index-2005 (HEI-2005). Parenting styles were measured and scored using the Parenting Styles and Dimensions Questionnaire. Linear regressions were used to test main and interaction associations between HEI-2005 scores and parenting styles.
Non-probability sample of low-income and food-insecure households in South Carolina, USA.
Parent–child dyads (n 171). Parents were ≥18 years old and children were 9–15 years old.
We found a significant interaction between authoritative and authoritarian parenting style scores. For those with a mean authoritarian score, each unit increase in authoritative score was associated with a higher HEI-2005 score (b = 3·36, P < 0.05). For those with an authoritarian score that was 1 sd above the mean authoritarian score, each unit increase in authoritative score was associated with a higher HEI-2005 score (b = 8.42, P < 0.01). For those with an authoritarian score that was −1 sd below the mean authoritarian score, each unit increase in authoritative score was associated with a lower HEI-2005 score; however, this was not significant (b = −1·69, P > 0·05). Permissive parenting style scores were negatively associated with child dietary quality (b = −2·79, P < 0·05).
Parenting styles should be considered an important variable that is associated with overall dietary quality in children living within low-income and food-insecure households.
A national need is to prepare for and respond to accidental or intentional disasters categorized as chemical, biological, radiological, nuclear, or explosive (CBRNE). These incidents require specific subject-matter expertise, yet have commonalities. We identify 7 core elements comprising CBRNE science that require integration for effective preparedness planning and public health and medical response and recovery. These core elements are (1) basic and clinical sciences, (2) modeling and systems management, (3) planning, (4) response and incident management, (5) recovery and resilience, (6) lessons learned, and (7) continuous improvement. A key feature is the ability of relevant subject matter experts to integrate information into response operations. We propose the CBRNE medical operations science support expert as a professional who (1) understands that CBRNE incidents require an integrated systems approach, (2) understands the key functions and contributions of CBRNE science practitioners, (3) helps direct strategic and tactical CBRNE planning and responses through first-hand experience, and (4) provides advice to senior decision-makers managing response activities. Recognition of both CBRNE science as a distinct competency and the establishment of the CBRNE medical operations science support expert informs the public of the enormous progress made, broadcasts opportunities for new talent, and enhances the sophistication and analytic expertise of senior managers planning for and responding to CBRNE incidents.
Research was conducted from 2013 to 2015 across three sites in Mississippi to evaluate corn response to sublethal paraquat or fomesafen (105 and 35 g ai ha−1, respectively) applied PRE, or to corn at the V1, V3, V5, V7, or V9 growth stages. Fomesafen injury to corn at three d after treatment (DAT) ranged from 0% to 38%, and declined over time. Compared with the nontreated control (NTC), corn height 14 DAT was reduced approximately 15% due to fomesafen exposure at V5 or V7. Exposure at V1 or V7 resulted in 1,220 and 1,110 kg ha−1 yield losses, respectively, compared with the NTC, but yield losses were not observed at any other growth stage. Fomesafen exposure at any growth stage did not affect corn ear length or number of kernel rows relative to the NTC. Paraquat injury to corn ranged from 26% to 65%, depending on growth stage and evaluation interval. Corn exposure to paraquat at V3 or V5 consistently caused greater injury across evaluation intervals, compared with other growth stages. POST timings of paraquat exposure resulted in corn height reductions of 13% to 50%, except at V7, which was most likely due to rapid internode elongation at that stage. Likewise, yield loss occurred after all exposure times of paraquat except PRE, compared with the NTC. Corn yield was reduced 1,740 to 5,120 kg ha−1 compared with the NTC, generally worsening as exposure time was delayed. Paraquat exposure did not reduce corn ear length, compared with the NTC, at any growth stage. However, paraquat exposure at V3 or V5 was associated with reduction of kernel rows by 1.1 and 1.7, respectively, relative to the NTC. Paraquat and fomesafen applications near corn should be avoided if conditions are conducive for off-target movement, because significant injury and yield loss can result.
Disparities exist among Latino smokers with respect to knowledge and access to smoking cessation resources. This study tested the feasibility of using case management (CM) to increase access to pharmacotherapy and quitlines among Latino smokers.
Latino smokers were randomized to CM (n = 40) or standard care (SC, n = 40). All participants received educational materials describing how to utilize pharmacy assistance for cessation pharmacotherapy and connect with quitlines. CM participants received four phone calls from staff to encourage pharmacotherapy and quitline use. At 6-months follow-up, we assessed the utilization of pharmacotherapy and quitline. Additional outcomes included self-reported smoking status and approval for pharmacotherapy assistance.
Using intention-to-treat analysis, CM produced higher utilization than SC of both pharmacotherapy (15.0% versus 2.5%; P = 0.108) and quitlines (12.5% versus 5.0%; P = 0.432), although differences were not statistically significant. Approval for pharmacotherapy assistance programs (20.0% versus 0.0%; P = 0.0005) was significantly higher for CM than SC participants. Self-reported point-prevalence smoking abstinence at 6-months were 20.0% and 17.5% for CM and SC, respectively (P = 0.775).
CM holds promise as an effective intervention to connect Latino smokers to evidence-based cessation treatment.
A nineteen element mercuric iodide (HgI2) detector array has been developed in order to investigate the potential of using this technology for in-vivo x-ray and gamma-ray imaging. A prototype cross-grid detector array was constructed with hexagonal pixels of 1.9 mm diameter (active area = 3.28 mm2) and 0.2 mm thick septa. The overall detector active area is roughly 65 mm2. A detector thickness of 1.2 mm was used to achieve about 100% efficiency at 60 keV and 67% efficiency at 140 keV The detector fabrication, geometry and structure were optimized for charge collection and to minimize crosstalk between elements. A section of a standard high resolution cast-lead gamma-camera collimator was incorporated into the detector to provide collimation matching the discrete pixel geometry. Measurements of spectral and spatial performance of the array were made using 241-Am and 99m-Tc sources. These measurements were compared with similar measurements made using an optimized single HgI2 x-ray detector with active area of about 3 mm2 and thickness of 500 μm.
Dust vortices with a void at the centre are reported in this paper. The role of the spatial variation of the plasma potential in the rotation of dust particles is studied in a parallel plate glow discharge plasma. Probe measurements reveal the existence of a local potential minimum in the region of formation of the dust vortex. The minimum in the potential well attracts positively charged ions, while it repels the negatively charged dust particles. Dust rotation is caused by the interplay of the two oppositely directed ion drag and Coulomb forces. The balance between these two forces is found to play a major role in the radial confinement of the dust particles above the cathode surface. Evolution of the dust vortex is studied by increasing the discharge current from 15 to 20 mA. The local minimum of the potential profile is found to coincide with the location of the dust vortex for both values of discharge currents. Additionally, it is found that the size of the dust vortex as well as the void at the centre increases with the discharge current.
Using a commercial X-ray tomography instrument, we have obtained reconstructions of a graded-index optical fiber with voxels of edge length 1.05 µm at 12 tube voltages. The fiber manufacturer created a graded index in the central region by varying the germanium concentration from a peak value in the center of the core to a very small value at the core-cladding boundary. Operating on 12 tube voltages, we show by a singular value decomposition that there are only two singular vectors with significant weight. Physically, this means scans beyond two tube voltages contain largely redundant information. We concentrate on an analysis of the images associated with these two singular vectors. The first singular vector is dominant and images of the coefficients of the first singular vector at each voxel look are similar to any of the single-energy reconstructions. Images of the coefficients of the second singular vector by itself appear to be noise. However, by averaging the reconstructed voxels in each of several narrow bands of radii, we can obtain values of the second singular vector at each radius. In the core region, where we expect the germanium doping to go from a peak value at the fiber center to zero at the core-cladding boundary, we find that a plot of the two coefficients of the singular vectors forms a line in the two-dimensional space consistent with the dopant decreasing linearly with radial distance from the core center. The coating, made of a polymer rather than silica, is not on this line indicating that the two-dimensional results are sensitive not only to the density but also to the elemental composition.
We report a roll-to-roll dry processing for making low cost and high performance electrodes for lithium-ion batteries (LIBs). Currently, the electrodes for LIBs are made with a slurry casting procedure (wet method). The dry electrode fabrication is a three-step process including: step 1 of uniformly mixing electrode materials powders comprising an active material, a carbonaceous conductor and the soft polymer binder; step 2 of forming a free-standing, continuous electrode film by pressing the mixed powders together through the gap between two rolls of a roll-mill; and step 3 of roll-to-roll laminating the electrode film onto a substrate such as a current collector. Compared with the conventional wet slurry electrode manufacturing method, the dry manufactural procedure and infrastructure are simpler, the production cost is lower, and the process eliminates volatile organic compound emission and is more environmentally friendly, and the ability of making thick (>120µm) electrodes with high tap density results in high energy density of final energy storage device. A prototype LIBs of LiNi0.6Mn0.2Co0.2O2 (NMC622)/graphite also has 230 Wh/ kg energy density.