Body size is an important life-history trait in eusocial insects which plays a key role in colony fitness. The division of labour, represented by caste polyethism, correlates with divergent morphological traits. Size polymorphism has been noted in the tropical fire ant, Solenopsis geminata; however, little is known regarding the differences in the size distributions of workers performing foraging tasks. In the present study, task partitioning was observed in the foraging activities of S. geminata. Two subgroups among foraging workers of S. geminata were discovered using the Gaussian mixture model: a large worker group (head width ≥ 0.924 mm) and a small worker group (head width < 0.924 mm). The foraging worker population comprised two distinct groups – 25.64% were large workers and 74.36% were small workers. Larger workers delivered heavier seeds faster than smaller workers, but this difference became less apparent when lighter seeds were being carried. When large prey such as crickets was encountered during foraging, S. geminata partitioned their tasks into cutting and transportation. The large workers were observed to cut cricket prey into fragments with their longer mandibles, and the small workers then transported these fragments back to the nest. These results present evidence of task partitioning among tropical fire ants, with different tasks being performed by ants of different castes.

This paper presents the implementation, validation and application of TCE (total collision energy) model for simulating hypersonic reactive flows in a parallel direct simulation Monte Carlo code, named PDSC++, using an unstructured grid. A series of benchmarking test cases, which include reproduction of theoretical rate constants in a single cell, 2D hypersonic flow past a cylinder and 2D-axisymmetric hypersonic flow past a sphere, were performed to validate the implementation. Finally, detailed aerothermodynamics of the flown reentry Apollo 6 Command Module at 105 km is simulated to demonstrate the powerful capability of the PDSC++ in treating realistic hypersonic reactive flow at high altitude.

Parasitic castration is a strategy used by parasites to minimize damage to the host by consuming its reproductive system, which results in the morphological alteration of the host. We determined that the forewing shape and density of the antennal sensilla of field-collected adult male mantids (Hierodula formosana), infected by horsehair worms (Chordodes formosanus) was partially feminized (intersexuality), and both male and female mantids infected by horsehair worms exhibited allometric changes in their wings and walking legs. In addition, the testes of most infected male adults disappeared or reduced in size, whereas the number of ovarioles in infected female adults was unaffected. The infection mainly influenced the structures related to host reproduction and locomotion, suggesting unbalanced energy exploitation and the reduction of parasitic virulence. In addition, the intersexuality of infected male adults indicated that sexual differentiation in insects, which researchers have considered to be an autonomous process, was influenced by the infection. The similarity of the antennae of infected male adults with those of last-instar female nymphs suggested that parasitic juvenilization may cause such feminization, but the mechanism of parasitic influence on insect sex characteristics should be studied further.

The electrode materials for VRFB should possess higher electric conductivity, corrosion resistance and hydrophilic properties in sulfuric acid. The characteristics of the electrode materials affect the stability and the energy efficiency of VRFB. Carbon materials are the best suited for VRFB applications. In this study, the calcined treatment, acid treatment and ozone treatment were used to modify the surface of carbon papers. The redox reaction of [VO]2+/[VO2]+ on the modified carbon papers was evaluated by cyclic voltammetry (CV). The surface compositions of carbon materials were analyzed by X-ray photoelectron spectrometry (XPS). The experimental results reveal that three oxidative methods enhance the redox reaction of [VO]2+/[VO2]+. The calcined treatments and acid treatments also enhanced hydrolysis reaction. The mole ratio of O/C apparently increased, but the binding energy of C1s and O1s were not chemically shifted in the acid treatment. The intensity of binding energy of O1s, between 532 eV and 534 eV, apparently increased in the ozone and calcined treatments. The Ox treated samples were more hydrophilic than the Oz treated samples. In the Ox treated samples, the decrease of Rct value indicates that was contributed from the redox reaction of [VO]2+/[VO2]+ and hydrolysis reaction. It does not completely benefit the energy efficiency of VRFB. The 5 x 5 cm2 modified carbon papers were used as electrode materials in the VRFB. The voltage efficiency, coulomb efficiency and energy efficiency reached 93 %, 90 % and 83 %, respectively, at a current density of 12 mA．cm-2 at 0.8-1.8 V.

The pathological mechanism of restenosis is primarily attributed to excessive proliferation of vascular smooth muscle cells (VSMC). The preventive effects of ethanol extract of Dunaliella salina (EDS) on balloon injury-induced neointimal formation were investigated. To explore its molecular mechanism in regulating cell proliferation, we first showed that EDS markedly reduced the human aortic smooth muscle cell proliferation via the inhibition of 5′-bromo-2′-deoxyuridine (BrdU) incorporation at 40 and 80 μg/ml. This was further supported by the G0/G1-phase arrest using a flow cytometric analysis. In an in vivo study, EDS at 40 and 80 μg/ml was previously administered to the Sprague–Dawley rats and found that the thickness of neointima, and the ratio of neointima:media were also reduced. EDS inhibited VSMC proliferation in a dose-dependent manner following stimulation of VSMC cultures with 15 % fetal bovine serum (FBS). Suppressed by EDS were 15 % FBS-stimulated intracellular Raf, phosphorylated extracellular signal-regulated kinases (p-Erk) involved in cell-cycle arrest and proliferating cell nuclear antigen. Phosphorylated focal adhesion kinase (p-FAK) was also suppressed by EDS. Also active caspase-9, caspase-3 and cleaved poly(ADP-ribose) polymerase (PARP) protein expression levels were increased by administration with EDS; the apoptotic pathway may play an important role in the regulatory effects of EDS on cell growth. These observations provide a mechanism of EDS in attenuating cell proliferation, thus as a potential intervention for restenosis.

We have fabricated La0.6Ca0.4MnO3 periodic arrays exhibiting tunable optical properties and magnetic properties using nontoxic and environmentally friendly electron beam resist made from La0.6Ca0.4MnO3 sol-gel precursor. We studied their unique optical properties by using the spectral microreflectometer and their magnetic properties using the superconducting quantum interference device and magnetic force microscopy. Additionally, the resist has the ability to demonstrate both positive and negative resist behaviors depending on the electron beam dosage. With these special characteristics, we can fabricate periodic structure on a thin film possessing controlled optical reflectance properties with one fixed design electron beam pattern without changing the structural parameters but changing the electron beam dosage only. Our approach provides an uncomplicated route for the fabrication of nanometer scale magnetic patterns, which serve as the building blocks in the search for novel properties of periodic magnetic arrays.

Dental remineralization may be achieved by mediating the interactions between tooth surfaces with free ions and biomimetic peptides. We recently developed octuplet repeats of aspartate-serine-serine (DSS-8) peptide, which occurs in high abundance in naturally occurring proteins that are critical for tooth remineralization. In this paper, we evaluated the possible role of DSS-8 in dentin remineralization. Human dentin specimens were demineralized, exposed briefly to DSS-8 solution, and then exposed to concentrated ionic solutions that favor remineralization. Dentin nano-mechanical behaviors, hardness and elastic modulus, at various stages of treatment were determined by nanoindentation. The phase, microstructure and morphology of the resultant surfaces were characterized using grazing incidence X-ray diffraction, variable pressure scanning electron microscopy, and atomic force microscopy, respectively. Nanoindentation results show that DSS-8 remineralization effectively improves the mechanical and elastic properties of native dentin. Moreover, the hardness and elastic modulus for the DSS-8 treated dentin were significantly higher than surfaces remineralized without DSS-8.

A total of 80 patients, diagnosed by echocardiography as having ventricular septal defect with aortic valvar prolapse, underwent cardiac catheterization and surgery. Echocardiographic and angiographic results were compared with surgical findings. The ventricular septal defects as observed during surgery were found to be doubly committed and subarterial in 49 (61%), muscular outlet in 10 (13%), and perimembranous in 21(26%). The location had been erroneously categorized by echocardiography and angiography in 12 (15%) and in 15 (19%) patients, respectively. Prolapse of the right coronary leaflet of the aortic valve, as documented by echocardiography, was confirmed by angiography in all but two cases. Prolapse of the noncoronary leaflet was detected by both imaging modalities in three patients. Prolapse of the right coronary and noncoronary leaflets was observed at surgery in 49 and three patients, respectively. The mean size of the ventricular septal defect, when measured by echocardiography, was significantly smaller than that found following surgical measurements (3.3±1.3 vs 8.4±3.8 mm, p<0.001). Our study showed that the ventricular septal defect was erroneously classified in the presence of prolapse of the aortic valve in 15% and 19% of our cases by echocardiography and angiography, respectively. The herniated sinus of Valsalva forming the “roof” of the ventricular septal defect probably redirected the jet across the defect to cause the errors in interpretation. Echocardiography, nevertheless, is as reliable as angiography in our hands in the follow-up of patients with ventricular septal defect opening to the outlet of the right ventricle.

Dental remineralization may be achieved by mediating the interactions between tooth surfaces with free ions and biomimetic peptides. We recently developed octuplet repeats of aspartate-serine-serine (DSS-8) peptide, which occurs in high abundance in naturally occurring proteins that are critical for tooth remineralization. In this paper, we evaluated the possible role of DSS-8 in enamel remineralization. Human enamel specimens were demineralized, exposed briefly to DSS-8 solution, and then exposed to concentrated ionic solutions that favor remineralization. Enamel nano-mechanical behaviors, hardness and elastic modulus, at various stages of treatment were determined by nanoindentation. The phase, microstructure and morphology of the resultant surfaces were characterized using the grazing incidence X-ray diffraction (GIXD), variable pressure scanning electron microscopy (VPSEM), and atomic force microscopy (AFM), respectively. Nanoindentation results show that the DSS-8 remineralization effectively improves the mechanical and elastic properties for demineralized enamel.

This study presents the mechanical and electrical properties (including elastic modulus, yield strength and electrical resistance) of PDMS/CNTs nanocomposites. The elastic modulus and yield strength were determined from tensile tests. In addition, a high resistance meter was used to measure the electrical resistances of the PDMS/CNTs nanocomposites. The test specimens of nanocomposites were manufactured using the thermoforming method. There were two recipes used during the thermoforming process: 100 °C for 1 hour, and 150 °C for 15 minutes. The mixtures of PDMS and CNTs were stirred by ultrasonic instrument to prevent polymerization. A feeler gap was used to define the thickness of the specimens. Therefore, the thickness could be controlled within the range of ∼100 μm. Four different kinds of specimens were investigated, including pure PDMS, 1.0 wt%, 2.0 wt% and 4.0 wt% CNTs polymeric composites. As for the l00°C recipe, the elastic modulus of pure PDMS, 1.0 wt%, 2.0 wt%, and 4.0 wt% CNTs were 1.05MPa, 1.17MPa, 1.10MPa and 1.35MPa, respectively. A for the l50°C recipe, the elastic modulus of pure PDMS, 1.0 wt%, 2.0 wt% and 4.0 wt% CNTs were 1.32MPa, 1.42MPa, 1.43MPa, and 1.54MPa. The differences of electrical resistance of PDMS/CNTs nanocomposites at two different conditions and the microstructures composed of the mixtures are also described in this article.