This contribution reports on the biosynthesis of nickel oxide and zinc oxide nanoparticles (NiO-NPs & ZnO-NPs) via a natural extract from Moringa Oleifera leaves as an effective chelating and/or oxidizing/reduction agent of nickel nitrate hexahydrate and zinc nitrate hexahydrate. The structural and optical properties of these two types of semiconductors obtained in a similar procedure are investigated using X-rays Diffraction (XRD), Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR), diffuse reflectance UV-Visible-NIR and Photoluminescence (PL) techniques. The structural analysis shows the formation of pure cubic NiO-NPs and pure wurtzite ZnO-NPs with an average crystallite size of 17.80 nm and 10.81 nm respectively. Their band gaps, calculated from the diffuse reflectance analysis were found to be 4.28 eV and 3.35 eV respectively.

This contribution provides the synthesis and characterization of nickel oxide nanoparticles (NiO NPs) which were prepared by green synthesis method using natural extract oranges peel skin (Peel Citrus Sinensis) as an effective bio-oxidizing/bio-reducing agent. The effect of different calcination temperatures on the size of the NiO NPs was investigated. The prepared nanoparticles were characterized by various techniques such as X-rays diffraction (XRD) results indicated that all the samples have a face-centered cubic (FCC) structure and confirmed the presence of high degree of crystallinity nature NiO NPs. The functional group composition of NiO NPs were investigated by using attenuated total reflection-Fourier transform infrared (ART-FTIR), Photoluminescence (PL), and Scanning electron microscopy (SEM).

In this study, zinc oxide nanoparticles (ZnO NPs) in powder and in thin film were successfully synthesized first time using an eco-friendly, simple and cost effective green synthesis method mediated by corn husk (Zea mays) extract as an effective chelating agent, and zinc nitrate hexahydrate as precursor. Diverse characterizations techniques such as High Resolution – Scanning Electron Microscopy (HR-SEM), Energy Dispersive X- rays Spectroscopy (EDS), X-Rays Diffraction (XRD), and UV – Vis – NIR spectroscopy as well as Photoluminescence (PL) were investigated to confirm ZnO NPs nature. For the ZnO NPs powder, highly crystalline ZnO nanoparticles (ZnO NPs) annealed at 500°C which are 48.635 nm in particles size were characterised by HR-SEM and XRD analysis. The structure morphology and the constituents of the resultant ZnO powder were investigated respectively by HR-SEM and EDS. UV – Visible spectroscopy analysis was investigated on the optical band gap of ZnO NPs, which was calculated to be 3.31 eV. This result indicates that ZnO NPs can be used in metal oxide semiconductor-based devices. For the ZnO NPs thin film, XRD patterns of hexagonal wurtzite structure with c/a ratio about of 1.60 and μ – parameter of 0.38 were obtained. PL measurements showed a broad emission band in the 380 – 800 nm range, centred at 481 nm. ZnO NPs thin film yielded relatively more intense photoluminescence spectra than the ZnO NPs powder. The intrinsic point defects and defect level transitions responsible for the broad emission are discussed.

The study report on Vanadium dioxide thin films of about 100nm thickness deposited using pulsed laser deposition on Si (100). The novel phase change reported is attributed to the post-treatment of the films via ion implantation with 25 KeV C+ ion beam at varying particle fluence (1E15, 1E16, and 1E17 /cm2). At the initial fluence, the preferred phase is retained while amorphization and recrystallization of the film is observed as the fluence increase to 1E16 ions/cm2and 1E17 ions/cm2, respectively. The phase transition of the samples is observed to occur at a temperature below 320 K while stabilization of the low phase structure is observed for the middle fluence. Further increase restores the SMT behaviour/trend that occurred at elevated temperatures.

The REE (rare-earth-elements) cerium (Ce) is the most abundant earth-crust element and their oxides have great attention in the form of nanocrystalline nature with superior physical and chemical properties. Pure and Co (1%, 3% and 5%) doped CeO2 nanoparticles (NPs) synthesized by co-precipitation technique were characterized through X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV-visible spectroscopy. XRD shows face-centred-cubic (FCC) crystal symmetry with average crystallite size 6–12 nm. HRTEM exhibits almost identical cubical shaped particles with average size 4–10 nm. Tuned band-gap may be observed from UV-visible spectrum of CeO2-NPs upon Co (1%, 3% & 5%) incorporation. Enhancement of the photocatalytic activity observed for Co-doped (1%, 3% & 5%) to the degradation of methylene-blue (MB) dye under visible-light absorption.

Biosynthesized Zincite nanoparticles have been successfully demonstrated by a completely green process mediated aqueous extract of rosemary leaves acting as both reducing and stabilizing agents and zinc nitrate hexahydrate as the precursor. The synthesis was free of solvents and surfactants to adhere to green chemistry principles and the impartation of environmental benignity. To achieve our objective, structural and optical investigations of ZnO annealed at 500°C for 2hrs were carried-out using complementary techniques. High resolution transmission electron microscopy (HRTEM) revealed the self-assembled, highly agglomerated quasi-hexagonal shaped NPs and the average particle size was found to peak at 15.62 ± 0.22 nm. Selected area electron diffraction (SAED) and X-ray diffraction (XRD) exhibited several diffraction rings with clear diffraction spots confirming their polycrystallinity and the purity of ZnO NPs with a wurtzite structure. Furthermore, the energy dispersive X-ray spectroscopy (EDS) substantiated the presence of Zn and O in the sample and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) illustrated the Zn-O chemical bonds. From UV-Vis-NIR, the optical band gap was amounted to 3.2 eV and photoluminescence (PL) emission spectrum to 2.9eV with high surface defects and oxygen vacancies. Through these results, the use of rosemary leaves extract is hereby shown to be a cost-effective and environmentally friendly alternative to synthesize Zincite nanoparticles (ZnO NPs).

Bio-reduction agents are being explored to synthesised nanoparticles to minimize the effects of toxic chemicals. The present study was focused on green approach for the synthesis of zinc oxide nanoparticles using aqueous seeds extract of Papaver somniferum. The biosynthesised ZnO NPs (27.8nm) were characterized by using of spectroscopy and microscopy instruments. The surface morphology and the structural analysis confirms the formation of hexagonal nanostructure and a pure zincite nature of ZnO nanoparticles (NPs) respectively. The EDS spectrum confirms pure ZnO NPs were synthesised. From electrochemical properties, the CV indicates both anodic and cathodic sweep are quasi-reversible properties whose intensity increases with the scan rates. The bode plot shows the maximum angles of 74o which is an indication of a higher conductivity of ZnO NPs.

A novel technique providing a cost effective sustainable wet chemical etching method of synthesizing black Moly thin films rapidly has been presented. A top- down method for fabricating MoO3 has been investigated to understand the effect of chemical etchant concentration on the structural, morphological and optical properties of the thin films on Mo substrates. The XRD patterns demonstrated the formation of Tugarinovite MoO2 films on Mo substrate after annealing at 500°C in a vacuum. In this work, we developed nanostructured MoO3 on Mo substrate solar absorber, with a high solar absorptance of over 89%. These results suggest that solar absorbers made from refractory metal oxide nanostructures can be used for solar thermal applications.

P-type NiO powders with an average crystallite size of 16 nm as shown by x-ray diffraction analysis were produced via biosynthesis using cactus plant extract. SEM showed that the NiO powders consisted of particles with sizes in the 20-35 nm range. A cyclic voltammetric study of the NiO nanopowders showed a quasi-reversible redox processes with the NiO powder showing potential for pseudo capacitance. Through these findings the use of natural Cactus extracts is hereby shown to be a cost-effective and environmentally friendly alternative for preparing Nickel oxide nanosized powders that can be of use in a variety of energy storage applications.

Vanadium dioxide thin films are considered as smart functional coatings for thermal shielding, and are attractive as a passive thermal shield for spacecrafts. In space they would, however, be subjected to bombardment by interstellar dust particles and electromagnetic radiation. Materials subjected to irradiation will suffer damages induced by the displacement cascades initiated by nuclear reaction. Such cosmic radiation can severely impact the structure and function of materials. To study this effect in the laboratory, we have deposited VO2 films on silicon wafers and exposed them to γ-radiation of doses up to 100 kGy by using a 60Co nuklid source with 1.17 and 1.33 MeV photon energy. We anticipate that the γ-radiation causes local structural perturbations which can amount to defects with a corresponding change in electronic structure and thermal shielding property. We report on the photo emission spectroscopy of gamma irradiated VO2 thin films.

The adult Papilio demoleus Linnaeus comes in different sizes (80-100 mm) and colours. On the basis of structural colour observation, an experimental and theoretical study on the different colours on Papilio demoleus Linnaeus wings was conducted. The wing scales were investigated from a photonic crystal perspective using scanning electron and optical microscopies and reflectance measurements. In the SEM measurements, the parts studied show nanostructured ridges separated by crossribs (grooves). The scales show several tilted cuticle layers lapped on the ridges, which constitute a grating. The widths of the ridges and crossribs (grooves) in the grating are different. Arrangements and shapes of scales are clearly seen under the optical microscopy. It was deduced that the yellow colour with the highest reflectance of 485 nm and 580 nm could be due to multiple interferences from a highly tilted cuticle arrangement. The layer arrangement in the brown and ash scales is not enough to reflect observable interference light. The study shows an application in fine light elements in the photo-electro devices.

This work reports on the synthesis and the main physical and chemical properties of ZnO nanoparticles synthesized by an entirely green Bio-physical-chemical process using natural dye extract from Adansonia digitata leaves as an efficient reduction/oxidizing agent. Their structural and surfaces properties by electron microscopy, X-rays diffraction, Raman and TGA, as well as gas adsorption analysis are reported.

Recently, scientists have demonstrated that material surfaces in nature that possess special wettability properties are composed of micro- and nanostructures. In this study, we focused on the importance of surface structures in determining the wettability of wings of the flying insect species: Idea malabarica, Lucilia sericata and Chrysomya marginalis. Scanning Electron Microscopy (SEM) analysis indicates the different nano-/micro- structures identified on the wings. Surface roughness which plays a role in influencing the wettability was theoretically estimated from the SEM images. While the spherical liquid water droplets used for testing wettability were observed to float on the surface of the Idea malabarica and Lucilia sericata wings, the surface of the Chrysomya marginalis wing was made completely wet. The super-hydrophobicity of the Idea malabarica wing as compared to the near-hydrophobicity/mild hydrophilicity of the Lucilia sericata wing and the distinct hydrophilicity of the Chrysomya marginilis wing could be attributed to its complicated composition of nano-/microstructures and higher surface roughness value.

LIBS is a developing analytical technique, which is used to perform qualitative and semi-quantitative elemental analysis of materials (solid, liquid and gas). Recently LIBS became an attractive technique to be used for geological samples, due to its advantages such as fast data collection and the lack of sample preparation. This study is done to improve analytical methods for geochemical analysis of samples during different exploration phases (Mining, filed analysis, etc.), to be used in the future as a real-time analysis method to save money and time spent in labs. In this work, LIBS has been used to differentiate between some geological samples gathered from different areas: South Africa and Namibia. Using principal component analysis (PCA), it was found that LIBS was able to differentiate between the samples even those of the same area. The results from the LIBS technique were correlated with subsequent analysis of the same samples by Particle-Induced X-ray emission (PIXE).

This contribution reports, to the best of our knowledge, for the first time on the neutron tunneling phenomenon in nickel isotopes based nanostructured. More accurately, 58Ni-62Ni-58Ni thin films Fabry-Perot resonator configuration exhibited several tunneling resonances. In total, there were 7 tunneling resonances. These tunneling resonances manifest themselves via sharp dips in the total reflection plateau due to quasi-bound states in the nanostructured isotopic based nickel thin film Fabry-Perot resonator.

Graphene nanosheets were prepared by pulsed Nd:YAG laser ablation of graphite target in H2O under ambient conditions. The synthesized graphene nanosheets were characterized by high resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), Raman spectroscopy and Selected Area Electron Diffraction (SAED). The obtained structural and morphological analysis confirmed that the graphene nanosheets could be formed in an aqueous medium via one step method where a nanosecond pulsed near-infrared (NIR) laser (λ = 1064 nm) is used to ablate the surface of a pure graphite target. Compared to other used chemical methods to synthesis graphene nanosheets, laser ablation is an easy, versatile, environmental friendly and rapidly growing method for the synthesis of nanostructured materials such as graphene nanosheets. This technique showed normal operation in liquid medium (i.e. water or organic) under ambient conditions. Our study confirmed the great potential of laser ablation in liquid method for the fabrication of graphene nanosheets based nanofluids wich has a potential applicatiuon as a heat transfer fluid.

In this contribution we report on the synthesis of n-type Bismuth vanadate (BiVO4) nanorods prepared via the use of aqueous extracts of Callistemon viminalis. X-ray diffraction analysis confirmed the formation of highly crystalline monoclinic BiVO4 nanorods post annealing of the Bismuth vanadate precursor powder at 500 °C. Scanning Electron Microscopy and High Resolution Transmission Electron Microscopy showed that BiVO4 nanorods have a high aspect ratio. Using UV-Vis absorption measurements the optical band gap of the nanorods is estimated to be 2.4 eV which makes the bio-synthesized BiVO4 powder a good candidate for sunlight driven photocatalysis.

Facile and direct synthesis of radiative VO2 (M) plate-like is reported. The snowflake material presents superstructures plate-like aggregate with an anisotropic orientation in shape governed by V2O5 and NaOH concentration giving high surface energy liable for chemical reactions with the medium. Pure crystalline VO2 (M) has been obtained with a complete hydrothermolysis of the precursor. The morphological, structural, elemental composition, crystallinity and vibrational bands of the powders were characterized by Powder X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Selected Area Electron Diffraction (SAED) and Fourier Transform-Attenuated Total Reflection (FTIR-ATR) infrared spectroscopy.

ZnO nanorods arrays were prepared on soda lime glass substrate by pulsed laser deposition method. Hexagonal rod-like ZnO rods were obtained under different conditions. Well-defined ZnO nanorods arrays were selected among different samples having various morphologies and sizes already studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). Here, we report on the contact angle measurement (CAM) of one of these samples. A systematic change of the surface wettability is observed in W-doped ZnO nanostructures. The water contact angle (WCA) of a 1 wt.% of WO3 target content was found to be the transition doping level from hydrophilic surface to a hydrophobic surface. We attributed the transition in surface wettability of the film with the doping to incorporation increase of tungsten into the film. Such characteristic surface wettability can play a key role in the adhesion of various layers on W-ZnO nanorods arrays for optoelectronic device applications.