To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Laser pulses of 200 ps with extremely high intensities and high energies are sufficient to satisfy the demand of shock ignition, which is an alternative path to ignition in inertial confinement fusion (ICF). This paper reports a type of Brillouin scheme to obtain high-intensity 200-ps laser pulses, where the pulse durations are a challenge for conventional pulsed laser amplification systems. In the amplification process, excited Brillouin acoustic waves fulfill the nonlinear optical effect through which the high energy of a long pump pulse is entirely transferred to a 200-ps laser pulse. This method was introduced and achieved within the SG-III prototype system in China. Compared favorably with the intensity of
in existing ICF laser drivers, a 6.96-
pulse with a width of 170 ps was obtained in our experiment. The practical scalability of the results to larger ICF laser drivers is discussed.
The plerocercoid (sparganum) of Spirometra erinaceieuropaei is the main aetiological agent of human sparganosis. To improve the current knowledge on S. erinaceieuropaei evolution, we performed multi-locus microsatellite typing of sparganum isolates from China for the first time. All available expressed sequence tag (EST) sequences for the Spirometra were downloaded from the GenBank. The identification and localization of microsatellites in ESTs was accomplished by MISA. Based on the selected microsatellites, the genetic structure of 64 sparganum isolates collected from 11 geographical locations in southwest China were investigated through principal component analysis, STRUCTURE analysis and neighbour-joining clustering. A total of 522 non-redundant ESTs containing 915 simple sequence repeats were identified from 12 481 ESTs screened. Five primer pairs were finally selected. Using these loci, a total of 12 alleles were detected in 64 sparganum isolates. Little variability was observed within each of geographical population, especially among isolates derived from Kunming of Yunnan (YN-KM) province. Both STRUCTURE analysis and the clustering analysis supported that two genotypes existed among the sparganum isolates from southwest China. In conclusion, five microsatellite markers were successfully developed, and sparganum population was observed to harbour low genetic variation, further investigation with deeper sampling was needed to elucidate the population structure.
Coarsening mechanism of precipitations was investigated in a weld metal of Alloy 617 during long-term aging at 750 °C, and its effect on impact toughness was clarified distinctly. The needle-like M6C phases at the grain boundary nucleated and coarsened at 2000 h and then presented a stable size with aging to 8000 h. Spherical γ′ phase grew rapidly with the rate of 0.0121 nm/h when aged at 1000 h; then, its ripening rate (RR) reduced to 0.0033 nm/h at 8000 h and stabilized around it. The coarsening of M6C and γ′ was, respectively, controlled by interface diffusion and volume diffusion with the coarsening rate constant of 7.865 × 10−20 m2/s and 1.519 × 10−27 m3/s. Interaction of M6C and γ′ could facilitate their coarsening and cause dramatic decrease in toughness at the early stage. At aging to 8000 h and more, the lower RR of needle-like M6C phases and γ′ phases helped to form stable toughness at a later stage.
In inertial confinement fusion experiments that involve short-laser pulses such as fast ignition (FI), diagnosis of neutrons is usually very challenging because high-intensity γ rays generated by short-laser pulses would mask the much weaker neutron signal. In this paper, fast-response scintillators with low afterglow and gated microchannel plate photomultiplier tubes are combined to build neutron time-of-flight (nTOF) spectrometers for such experiments. Direct-drive implosion experiments of deuterium-gas-filled capsules were performed at the Shenguang-II Upgrade (SG-II-UP) laser facility to study the compressed fuel areal density (〈ρR〉) and evaluate the performance of such nTOF diagnostics. Two newly developed quenched liquid scintillator detectors and a gated ultrafast plastic scintillator detector were used to measure the secondary DT neutrons and primary DD neutrons, respectively. The secondary neutron signals were clearly discriminated from the γ rays from (n, γ) reactions, and the compressed fuel areal density obtained with the yield-ratio method agrees well with the simulations. Additionally, a small scintillator decay tail and a clear DD neutron signal were observed in an integrated FI experiment as a result of the low afterglow of the oxygen-quenched liquid scintillator.
This study aim to derive and validate a simple and well-performing risk calculator (RC) for predicting psychosis in individual patients at clinical high risk (CHR).
From the ongoing ShangHai-At-Risk-for-Psychosis (SHARP) program, 417 CHR cases were identified based on the Structured Interview for Prodromal Symptoms (SIPS), of whom 349 had at least 1-year follow-up assessment. Of these 349 cases, 83 converted to psychosis. Logistic regression was used to build a multivariate model to predict conversion. The area under the receiver operating characteristic (ROC) curve (AUC) was used to test the effectiveness of the SIPS-RC. Second, an independent sample of 100 CHR subjects was recruited based on an identical baseline and follow-up procedures to validate the performance of the SIPS-RC.
Four predictors (each based on a subset of SIPS-based items) were used to construct the SIPS-RC: (1) functional decline; (2) positive symptoms (unusual thoughts, suspiciousness); (3) negative symptoms (social anhedonia, expression of emotion, ideational richness); and (4) general symptoms (dysphoric mood). The SIPS-RC showed moderate discrimination of subsequent transition to psychosis with an AUC of 0.744 (p < 0.001). A risk estimate of 25% or higher had around 75% accuracy for predicting psychosis. The personalized risk generated by the SIPS-RC provided a solid estimate of conversion outcomes in the independent validation sample, with an AUC of 0.804 [95% confidence interval (CI) 0.662–0.951].
The SIPS-RC, which is simple and easy to use, can perform in the same manner as the NAPLS-2 RC in the Chinese clinical population. Such a tool may be used by clinicians to counsel appropriately their patients about clinical monitor v. potential treatment options.
Familial monozygotic (MZ) twinning reports are rare around the world, and we report a four-generation pedigree with seven recorded pairs of female MZ twins. Whole-genome sequencing of seven family members was performed to explore the featured genetic factors in MZ twins. For variations specific to MZ twins, five novel variants were observed in the X chromosome. These candidates were used to explain the seemingly X-linked dominant inheritance pattern, and only one variant was exonic, located at the 5′UTR region of ZCCHC12 (chrX: 117958597, G > A). Besides, consistent mitochondrial DNA composition in the maternal linage precluded roles of mitochondria for this trait. In this pedigree, autosomes also contain diverse variations specific to MZ twins. Pathway analysis revealed a significant enrichment of genes carrying novel SNVs in the epithelial adherens junction-signaling pathway (p = .011), contributed by FGFR1, TUBB6, and MYH7B. Meanwhile, TBC1D22A, TRIOBP, and TUBB6, also carrying similar SNVs, were involved in the GTPase family-mediated signal pathway. Furthermore, gene-set enrichment analysis for 533 genes covered by copy number variations specific to MZ twins illustrated that the tight junction-signaling pathway was significantly enriched (p < .001). Therefore, the novel changes in the X chromosome and the provided candidate variants across autosomes may be responsible for MZ twinning, giving clues to increase our understanding about the underlying mechanism.
We demonstrate an all polarization-maintaining (PM) fiber mode-locked laser seeded, hybrid fiber/solid-slab picosecond pulse laser system which outputs
, 10 ps pulses at the central wavelength of 1064 nm. The beam quality factors
in the unstable and stable directions are 1.35 and 1.31, respectively.
picosecond pulses at the central wavelength of 355 nm are generated through third harmonic generation (THG) by using two
(LBO) crystals, in order to get better processing efficiency on polycrystalline diamonds. The high pulse energy and beam quality of these ultraviolet (UV) picosecond pulses are confirmed by latter experiments of material processing on polycrystalline diamonds. This scheme which combines the advantages of the all PM fiber mode-locked laser and the solid-slab amplifier enables compact, robust and chirped pulse amplification-free amplification with high power picosecond pulses.
Auditory verbal hallucinations (AVHs) are one of the most common and severe symptoms of schizophrenia, but the neuroanatomical abnormalities underlying AVHs are not well understood. The present study aims to investigate whether AVHs are associated with cortical thinning.
Participants were schizophrenia patients from four centers across China, 115 with AVHs and 93 without AVHs, as well as 261 healthy controls. All received 3 T T1-weighted brain scans, and whole brain vertex-wise cortical thickness was compared across groups. Correlations between AVH severity and cortical thickness were also determined.
The left middle part of the middle temporal gyrus (MTG) was significantly thinner in schizophrenia patients with AVHs than in patients without AVHs and healthy controls. Inferences were made using a false discovery rate approach with a threshold at p < 0.05. Left MTG thickness did not differ between patients without AVHs and controls. These results were replicated by a meta-analysis showing them to be consistent across the four centers. Cortical thickness of the left MTG was also found to be inversely correlated with hallucination severity across all schizophrenia patients.
The results of this multi-center study suggest that an abnormally thin left MTG could be involved in the pathogenesis of AVHs in schizophrenia.
The objective of the studies presented in this Research Communication was to investigate the association of single nucleotide polymorphisms present in the MAP4K4 gene with different milk traits in dairy cows. Based on previous QTL fine mapping results on bovine chromosome 11, the MAP4K4 gene was selected as a candidate gene to evaluate its effect on somatic cell count and milk traits in ChineseHolstein cows. Milk production traits including milk yield, fat percentage, and protein percentage of each cow were collected using 305 d lactation records. Association between MAP4K4 genotype and different traits and Somatic Cell Score (SCS) was performed using General Linear Regression Model of R. Two SNPs at exon 18 (c.2061T > G and c.2196T > C) with genotype TT in both SNPs were found significantly higher for somatic SCS. We found the significant effect of exon 18 (c.2061T > G) on protein percentage, milk yield and SCS. We identified SNPs at different location of MAP4K4 gene of the cattle and several of them were significantly associated with the somatic cell score and other different milk traits. Thus, MAP4K4 gene could be a useful candidate gene for selection of dairy cattle against mastitis and the identified polymorphisms might potentially be strong genetic markers.
In this paper, the occurrence of the stimulated Raman scattering (SRS) and its effects on stimulated Brillouin scattering (SBS) pulse compression in FC-40 are investigated. As the experimental medium, the characteristics of FC-40 are suitable for pulse compression. Firstly, the frequency shifts and the threshold of SRS in FC-40 are studied with a mode-locked laser system as pump source, without taking the SBS effect into account. On the basis of the experimental results, the competition between SRS and SBS as well as its effect on pulse compression is investigated. Results show that SRS gets higher gain and grows rapidly with the increase of the laser intensity by pump effect, which will result in decreasing of SBS energy reflection.
Dissimilar joints of advanced 9Cr/CrMoV have been successfully welded by narrow gap submerged arc welding using multi-layer and multi-pass techniques. The objective of our study is to establish the correlation between impact toughness and microstructural characteristics of the welded joints. Impact toughness tests were conducted in a wide range of temperature from −60 °C to 80 °C for different regions in the dissimilar joints. The fracture appearance transition temperature of base metal of 9Cr, CrMoV and weld metal were tested as 23 °C, −9 °C and −2 °C respectively, which all satisfied the service requirement. Optical microscope and scanning electron microscope revealed that weld metal and base metal of CrMoV comprised martensite and bainite while 9Cr was composed of lath martensite. The low toughness in the latter region arose from large grains with excessive carbide precipitates. Nonuniform microstructure in the heat-affected zone of 9Cr side caused different crack propagation paths and subsequently led to large variations of absorbed energy. When crack propagates along carbon-enriched zone in heat affected zone, the absorbed energy was 48 J. With crack deviating far from carbon-enriched zone, the absorbed energy increased to 147 J. Examination on fracture surfaces revealed the typical brittle fracture appearance in 9Cr and inter-granular fracture mode in heat-affected zone of 9Cr side when crack propagated along carbon-enriched zone.
The present study was performed to identify the genotype of a hypertrophic cardiomyopathy family and investigate the clinicopathogenic characteristics and prognostic features of relevant genetic abnormalities. Target sequence capture sequencing was performed to screen for pathogenic alleles in a 32-year-old female patient (proband). Sanger sequencing was carried out to verify the results. Sanger sequencing was also performed on other family members to identify allele carriers. A survival analysis was carried out using published literature and our findings. We found that the proband and her son harboured a Gly716Arg sequence variant of the β-myosin heavy chain. Neither the proband’s father nor the mother were carriers of this sequence variant; thus, the mutation was classified as “de novo”. Further survival analysis revealed that female patients appear to have a longer life expectancy compared with males. Our study may provide an effective approach for the genetic diagnosis of hypertrophic cardiomyopathy.
A 100-J-level Nd:glass laser system in nanosecond-scale pulse width has been constructed to perform as a standard source of high-fluence-laser science experiments. The laser system, operating with typical pulse durations of 3–5 ns and beam diameter 60 mm, employs a sequence of successive rod amplifiers to achieve 100-J-level energy at 1053 nm at 3 ns. The frequency conversion can provide energy of 50-J level at 351 nm. In addition to the high stability of the energy output, the most valuable of the laser system is the high spatiotemporal beam quality of the output, which contains the uniform square pulse waveform, the uniform flat-top spatial fluence distribution and the uniform flat-top wavefront.
Iron is an essential trace element that plays important roles in the cellular function of all organs and systems. However, the function of Fe(II) in mammalian embryo development is unknown. In this study, we investigated the role of Fe(II) during preimplantation embryo development. Depletion of Fe(II) using thiosemicarbazone-24 (TSC24), a specific Fe(II) chelator, rescued quenching of the Fe(II)-sensitive fluorophore phen green-SK. After in vitro fertilization, TSC24 significantly reduced the cleavage rate as well as blastocyst formation. The hatch rate of blastocysts was also reduced with 1 pM TSC24 treatment (20.25±1.86 versus 42.28±12.96%, p<0.05). Blastocysts were cultured in leukemia inhibitory factor-free mouse embryonic stem cell culture medium with or without TSC24, and those with depleted Fe(II) displayed delayed attachment and lost the ability to induce embryoid body formation. To further explore the mechanism of Fe(II) in embryo development, we assessed the expression of 5-hydroxymethylcytosine (5hmC) and OCT4 in the pronuclear and blastocyst stages, respectively. We observed that Fe(II) reduced 5hmC and OCT4 expression, which could be explained by low ten-eleven translocation (TET) enzyme activity induced by TSC24 treatment. These findings demonstrate that Fe(II) is required for mammalian embryo development and that it facilitates the process via regulation of TET activity.
Inconel 617 alloy (IN 617) is an important candidate material of advanced ultrasupercritical power unit above 700 °C. However, there are some issues in welding of IN 617 such as constitutional liquation and hot cracking. Tungsten inert gas (TIG) is considered as an effective welding method to join IN 617 because of low heat input and high quality. Investigation of the microstructure variation of TIG welded joint and its correlation with properties is helpful in deep understanding the stability and reliability of IN 617 welded joint. In this paper, the microstructure evolution and element segregation of IN 617 welded joint were investigated systematically. It is found that the base metal (BM) with significant banded structure is characterized by austenitic grains and some secondary phases distribute along the grain boundaries and inside the grains. The fine secondary phases are determined as M23C6 enriched with Cr and Mo elements. A few large polygon phases are identified as Ti(C, N) with a size of about 10 μm. The coarsened secondary phases are observed in the heat affected zone (HAZ) close to BM whilst the lamellar structure enriched with Cr and Mo is present along grain boundaries in the HAZ near the fusion line. The weld metal (WM) is fully austenitic with a dendritic structure and contains particles dispersing in the matrix. The element segregation on grain boundaries of IN 617 welded joint was analyzed by energy dispersive spectrometer. No obvious element segregation was observed in HAZ. In WM, the area in the vicinity of solidification grain boundaries and solidification subgrain boundaries (SSGBs) has a local depletion of Ni and Co while the Cr and Mo have no obvious segregation. Microhardness and high temperature tensile test of BM and WM were conducted. The WM has a little bit larger hardness value than BM and HAZ because of the strengthening effect of SSGBs. The fracture position is determined in the middle of WM, which is attributed to the grain boundary failure in the center of WM. The high temperature tensile properties of the welded joint are close to BM. In this investigation, the constitutional liquation in HAZ and solidification in WM have little effect on the high temperature tensile properties. TIG welding method is proved to be a suitable welding method to join IN 617.
The microstructural evolution of spray-formed high speed steel during hot deformation was investigated as well as the effects of spray forming parameters on the porosity formation. Four distinct zones are identified in the as-deposited material, and interstitial porosity is present in the bottom and peripheral zones, while gas-related porosity is mainly found in the central zone. It can keep the porosity at a minimum value by using the optimum parameters, e.g., the average porosity of central zone is 3.7% for a superheat of 170 °C and a gas-to-metal flow rate of 0.7. During hot deformation at 1150 °C, the amount of porosity can be obviously decreased by increasing the height reduction which also plays a key role in breaking up eutectic carbides. The critical height reduction for the breakdown of the eutectic carbides is 50%, the dominant mechanism being mechanical fragmentation.
Severe fever with thrombocytopenia syndrome (SFTS) is an emerging infectious disease that was caused by a novel bunyavirus, SFTSV. The study aimed to disclose the epidemiological and clinical characteristics of SFTSV infection in China so far. An integrated clinical database comprising 1920 SFTS patients was constructed by combining first-hand clinical information collected from SFTS sentinel hospitals (n = 1159) and extracted data (n = 761) from published literature. The considered variables comprised clinical manifestations, routine laboratory tests of acute infection, hospitalization duration and disease outcome. SFTSV-IgG data from 19 119 healthy subjects were extracted from the published papers. The key clinical variables, case-fatality rate (CFR) and seroprevalence were estimated by meta-analysis. The most commonly seen clinical manifestations of SFTSV infection were fever, anorexia, myalgia, chill and lymphadenopathy. The major laboratory findings were elevated lactate dehydrogenase, aminotransferase, followed by thrombocytopenia, lymphocytopenia, elevated alanine transaminase and creatine kinase. A CFR of 12·2% was estimated, significantly higher than that obtained from national reporting data, but showing no geographical difference. In our paper, the mortality rate was about 1·9 parts per million. Older age and longer delay to hospitalization were significantly associated with fatal outcome. A pooled seroprevalence of 3·0% was obtained, which increased with age, while comparable for gender. This study represents a clinical characterization on the largest group of SFTS patients up to now. A higher than expected CFR was obtained. A wider spectrum of clinical index was suggested to be used to identify SFTSV infection, while the useful predictor for fatal outcome was found to be restricted.
NiCrMoV steels used in nuclear rotor with heavy section were successfully fabricated by ultra-narrow gap submerged arc welding method. In this study, the mechanical properties including the tensile and impact toughness of the welded joints (WJs) with a wide temperature range were systematically investigated. Microstructural characterization indicated that the high-temperature tempered martensite and tempered bainite, as the main microstructure in WJ, were responsible for the improved comprehensive mechanical properties of the WJ. Microhardness across the WJ was measured as well, showing that the highest value of hardness occurred at the heat-affected zone which represents the appropriate lowest impact toughness of WJ. However, compared with the base metal, the ultimate tensile strength of the WJ displayed approximately equivalent values, while the yield strength was increased with increasing temperature. All the fracture of the WJ specimens occurred on the weld metal. In addition, the Charpy impact energy of weld metal was obtained at various temperatures, and the transition temperature (Tt) of welded metal was determined as 5 °C, which helps for the application design. The fractography indicated that the ductile fracture modes changed to quasi-cleavage ones gradually with decreasing temperature, and also the dimples became smaller and shallower.
Few studies have explored the relationship between dietary patterns and the risk of gestational diabetes mellitus (GDM). Evidence from non-Western areas is particularly lacking. In the present study, we aimed to examine the associations between dietary patterns and the risk of GDM in a Chinese population. A total of 3063 pregnant Chinese women from an ongoing prospective cohort study were included. Data on dietary intake were collected using a FFQ at 24–27 weeks of gestation. GDM was diagnosed using a 75 g, 2 h oral glucose tolerance test. Dietary patterns were determined by principal components factor analysis. A log-binomial regression model was used to examine the associations between dietary pattern and the risk of GDM. The analysis identified four dietary patterns: vegetable pattern; protein-rich pattern; prudent pattern; sweets and seafood pattern. Multivariate analysis showed that the highest tertile of the vegetable pattern was associated with a decreased risk of GDM (relative risk (RR) 0·79, 95 % CI 0·64, 0·97), compared with the lowest tertile, whereas the highest tertile of the sweets and seafood pattern was associated with an increased risk of GDM (RR 1·23, 95 % CI 1·02, 1·49). No significant association was found for either the protein-rich or the prudent pattern. The protective effect of a high vegetable pattern score was more evident among women who had a family history of diabetes (P for interaction = 0·022). These findings suggest that the vegetable pattern was associated with a decreased risk of GDM, while the sweets and seafood pattern was associated with an increased risk of GDM. These findings may be useful in dietary counselling during pregnancy.