To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
KRTAP8-1 was the initial high-glycine-tyrosine keratin-associated protein gene recognized in sheep, but little is known about the functional influence of this gene. The current study used polymerase chain reaction-single stranded conformational polymorphism analysis to genotype KRTAP8-1 in 391 Southdown × Merino-cross sheep from six sire-lines. Five previously described variants (named A to E) of KRTAP8-1 were identified with frequencies of 67.0, 14.2, 7.0, 10.7 and 1.0%, respectively. Of the four variants (A, B, C and D) that occurred at a frequency greater than 5%, the presence of C was found to be associated with a reduction in mean fibre curvature (MFC) and the presence of D was associated with an increase in mean staple strength (MSS), whereas the presence of A had a trend of association with reduced MSS. Associations were not identified with other wool traits. These results suggest that variation in KRTAP8-1 affects MSS and MFC, and that KRTAP8-1 has the potential to be used as a genetic marker for improving these traits.
A series of double-perovskite LaAMnNiO6 (A = La, Pr, Sm) catalysts with mesoporous morphology was prepared by a sol–gel method and further applied into photothermal synergistic degradation of gaseous toluene. Transmission electron microscopy and Brunauer–Emmett–Teller characterizations confirmed that double-perovskite LaAMnNiO6 (A = La, Pr, Sm) had obvious mesoporous structure, which can provide a larger specific surface area and further enhancing the reactivity of catalyst. UV-vis and X-ray photoelectron spectroscopy characterization illustrated that LaSmMnNiO6 possessed higher adsorption oxygen content and light absorption capacity, which contribute to the occurrence of catalytic oxidation in the Mars–van Krevelen redox cycle mechanism. A group of active tests showed that the double-perovskite LaSmMnNiO6 catalyst had a lower reaction initiation temperature (starting reaction at 75 °C) and a lower activity temperature of optimal reaction (more than 90% at 255 °C). Moreover, the research on reaction kinetics of the catalyst demonstrated that LaAMnNiO6 (A = La, Pr, Sm) had lower activation energy and thus exhibited better catalytic activity. The results of the study indicate that the double-perovskite LaAMnNiO6 (A = La, Pr, Sm) has broad application prospects in the field of volatile organic pollutant degradation.
The evolution of an
layer surrounded by air is experimentally studied in a semi-annular convergent shock tube by high-speed schlieren photography. The gas layer with a sinusoidal outer interface and a circular inner interface is realized by the soap-film technique such that the initial condition is well controlled. Results show that the thicker the gas layer, the weaker the interface–coupling effect and the slower the evolution of the outer interface. Induced by the distorted transmitted shock and the interface coupling, the inner interface exhibits a slow perturbation growth which can be largely suppressed by reducing the layer thickness. After the reshock, the inner perturbation increases linearly at a growth rate independent of the initial layer thickness as well as of the outer perturbation amplitude and wavelength, and the growth rate can be well predicted by the model of Mikaelian (Physica D, vol. 36, 1989, pp. 343–357) with an empirical coefficient of 0.31. After the linear stage, the growth rate decreases continuously, and finally the perturbation freezes at a constant amplitude caused by the successive stagnation of spikes and bubbles. The convergent geometry constraint as well as the very weak compressibility at late stages are responsible for this instability freeze-out.
The present study was performed on antigen-presenting cells (APCs) of Theileria annulata transformed dendritic cells (TaDCs) and monocyte-derived dendritic cells (MoDCs) to compare differences in antigen presentation and stimulation of T lymphocyte proliferation. Antigen presentation for T lymphocyte proliferation was analysed by flow cytometry. Additionally, the level of mRNA transcription of small GTPases of the Rab family expressed in the TaDC cell line was analysed by quantitative real-time polymerase chain reaction (Q-RT-PCR). The endocytosis rate of TaDCs was significantly (P < 0.01) lower than in MoDCs. In contrast, when T lymphocytes were co-cultured with TaDC-APCs T cell proliferation was similar, while co-culture with MoDC-APC stimulated proliferation of CD4+ cells to a greater degree than CD8+ cells. However, the efficacy of TaDC-APCs to stimulate T lymphocytes dropped as the number of passages of TaDC-APC increased. Likewise, the transcription level of Rab family genes also significantly (P > 0.001) declined with progressive passages (>50) of the TaDC cell line. We conclude that initially the TaDC cell line efficiently presents antigen to stimulate T lymphocyte proliferation to produce a cellular immune response against the presented antigen.
A novel shock tube is designed to investigate the nonlinear feature of convergent Richtmyer–Meshkov instability on a single-mode interface formed by a soap film technique. The shock tube employs a concave–oblique–convex wall profile which first transforms a planar shock into a cylindrical arc, then gradually strengthens the cylindrical shock along the oblique wall, and finally converts it back into a planar one. Therefore, the new facility can realize analysis on compressibility and nonlinearity of convergent Richtmyer–Meshkov instability by eliminating the interface deceleration and reshock. Five sinusoidal
interfaces with different amplitudes and wavelengths are considered. For all cases, the perturbation amplitude experiences a linear growth much longer than that in the planar geometry. A compressible linear model is derived by considering a constant uniform fluid compression, which shows a slight difference to the incompressible theory. However, both the linear models overestimate the perturbation growth from a very early stage due to the presence of strong nonlinearity. The nonlinear model of Wang et al. (Phys. Plasmas, vol. 22, 2015, 082702) is demonstrated to predict well the amplitude growth up to a normalized time of 1.0. The prolongation of the linear increment is mainly ascribed to the counteraction between the promotion by geometric convergence and the suppression by nonlinearity. Growths of the first three harmonics, obtained by a Fourier analysis of the interface contour, provide a first thorough validation of the nonlinear theory.
High inductive helical support provides a solution to controlling the alignment error of inner electrodes in magnetically insulated transmission lines (MITLs). Three-dimensional particle-in-cell simulations were performed to examine the current loss mechanism and the effects of structural parameters on electron flow in an MITL with a helical inductor. An empirical expression related to the ratio of electron current loss to anode current and the ratio of anode current to self-limited current was obtained. Electron current loss caused by helical inductor with different structures was displayed. The results indicate that the current loss in an MITL, near an inductive helical support, comprises both the inductor current and the electron current loss. The non-uniform structure and current of a helical inductor cause an abrupt change in the magnetic field near the helical support, which leads to anomalous behavior and current loss of electron flow. In addition, current loss in the inductive helical-supported MITL is negligible when the inductance of the support is sufficiently high. This work facilitates the estimation of electron current loss caused by the inductive helical support in MITLs.
Disturbances in lipid metabolism are at the core of several health issues facing modern society, including fatty liver and obesity. The SREBP-1 is one important transcription factor regulating lipid metabolism, but the relevant mechanism still remains unknown. The present study determined the transcriptional regulation of SREBP-1 and its target genes (including accα, fas and scd1) in a freshwater teleost, grass carp Ctenopharyngodon idella. We cloned and characterized the 1988 bp, 2043 bp, 1632 bp and 1889 bp sequences of srebp-1, accα, scd1, and fas promoters, respectively. A cluster of putative binding sites of transcription factors, such as SP, YY1, NF-Y, SREs and E-box element, were predicted on their promoter regions. nSREBP-1 overexpression reduced srebp-1 promoter activity, increased scd1 and fas promoter activity, but did not influence accα promoter activity. The site mutation and EMSA analysis indicated that srebp-1, fas and scd1 promoters, but not accα promoter, possessed SREs. In CIK cells of grass carp, nSREBP-1 overexpression significantly reduced srebp-1 mRNA expression, and up-regulated miR-29 mRNA expression. The 3’UTR of srebp-1 possessed the potential miR-29 binding site and miR-29 up-regulated the luciferase activity of srebp-1 3’UTR and srebp-1 mRNA expression, implying a self-activating loop of SREBP-1 and miR-29 in grass carp. Based on these results above, we found two novel transcriptional mechanisms for SREBP-1 in grass carp: (1) the auto-regulation sited on the SREBP-1 promoter regions was suppressive; (2) there was a self-activating loop of SREBP-1 and miR-29.
We assessed inheritance of resistance to sugarcane brown rust (Puccinia melanocephala) in selfing F1 populations of wild sugarcane germplasm Erianthus rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’. We tested parent and selfing F1 individuals for the brown rust resistance gene, Bru1, that has been shown to confer resistance to brown rust in sugarcane. The Bru1 gene was not detected in E. rockii ‘Yundian 95-19’, E. rockii ‘Yundian 95-20’ or their selfing F1 individuals, and we found there was segregation of resistance in the two selfing F1 populations (segregation ratio: 3:1). The results confirmed resistance in E. rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’ to sugarcane brown rust is controlled by a novel, single dominant gene.
In order to reveal the quantitative relationship between fatigue crack deflection path and cross-sectional grain boundary (GB) arrangement of metallic nanolayered composites (NLCs), a stochastic model was established based on the interface-dominant fatigue damage for the ultrafine-scale NLCs. The model indicates that the crack deflection length decreases with decreasing GB arrangement deviation and grain size of constituent layers. The observation and quantitative analysis of fatigue cracking behavior of the Cu/W multilayers with a layer thickness of 5 and 20 nm was conducted to verify the model.
Siliceous-sulphate rock coatings were observed at Zhenzhu Spring, an acid sulphate hot spring in the Tengchong volcanic field, China. These rock coatings are mainly formed of gypsum and amorphous silica. Some alum-(K), voltaite, α-quartz and muscovite were also found. Four different laminae are developed in the rock coatings: gypsum layer, tight siliceous layer, tabular siliceous layer and siliceous debris layer. The gypsum layer is located at the top of the rock coatings, while other siliceous layers appear below the gypsum layer. Geochemical modelling of the fluids was performed to identify the mechanisms responsible for the formation of gypsum and amorphous silica. The results indicated that the occurrence of gypsum is related to the acid-fog deposition and amorphous silica mainly originates from spring water. Fog deposition provided the rock coatings with abundant SO42− and Ca, and the subsequent complete evaporation of the condensed fluids produced gypsum. Seasonal climate change (especially variation in rainfall) determines the fluctuations of capillary action and dissolution. Rainfall events in the wet season led to periods of non-precipitating gypsum and promoted the capillary rise of the spring water. Slightly diluted capillary water (a small amount of rainwater) covered the rock coatings, formed a tight siliceous layer on the rock-coating surface and/or filled the pores among the gypsum crystals forming many tabular siliceous aggregates. Heavy rainfall (high dilution), however, resulted in non-precipitating amorphous silica and accelerated the gypsum dissolution, leaving tabular pores around tabular siliceous aggregates and forming a tabular siliceous layer.
American sloughgrass [Beckmannia syzigachne (Steud.) Fernald] is one of the most predominant and troublesome weeds in wheat (Triticum aestivum L.) fields rotated with rice (Oryza sativa L.) in China. Mesosulfuron-methyl is one of the main herbicides used to selectively control B. syzigachne in winter wheat fields in China. After many years of application, mesosulfuron-methyl failed to control B. syzigachne in Yutai County. The objectives of this study were to determine the resistance level to mesosulfuron-methyl and other acetolactate synthase (ALS) inhibitors in the B. syzigachne population collected from Yutai County (R) and identify the mechanism of resistance. The results indicated that the R population was 4.1-fold resistant to mesosulfuron-methyl and was cross-resistant to pyroxsulam (600-fold), imazethapyr (4.1-fold), flucarbazone (12-fold), and bispyribac-sodium (12-fold). In vitro assays revealed that ALS in the R population was as sensitive as that in a susceptible (S) population. Gene sequence analysis identified no known resistant mutations in the ALS gene of the R population. Furthermore, real-time quantitative reverse transcriptase PCR experiments indicated that the expression level of the ALS gene in the R population was not different from that of the S population. However, the cytochrome P450 inhibitor malathion reversed the R population's resistance to mesosulfuron-methyl. The result of ultraperformance liquid chromatography–tandem mass spectrometry (UPLC-MS-MS) spectral analysis indicated that the metabolic rates of mesosulfuron-methyl in the R population were significantly faster than in the S population. Therefore, non-target resistance to mesosulfuron-methyl has been demonstrated in the R population. The resistance was very likely caused by enhanced herbicide metabolism.
Cordierite foams were prepared by thermo-foaming of alumina–microsilica–talc powder dispersions in molten D-glucose anhydrous followed by reaction sintering at 1400 °C, which exhibited an interconnected cellular morphology and three-dimensional porous cell walls. The cordierite foam had a porosity of up to 96%, and its corresponding thermal conductivity was as low as 0.057 W/(m·K). The foam structures showed a great promise for gas filtration and gas catalytic support. The formation of interconnected cellular morphology, the variations of cell wall thickness, and cell size were explained from the perspective of viscosity and weak points in this paper. The linear shrinkage of cordierite foams having a density of 0.102–0.226 g/cm3 was in the range of 13.0–6.9%. And the compressive strength (0.05–0.28 MPa) was determined by the large cell size (1.1–1.3 mm), ultra-high porosity (91–96%), and characteristic of cordierite.
Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.
A compact circularly polarized (CP) rectenna with low profile and high efficiency based on the artificial magnetic conductor (AMC) is proposed in this paper. The receiving CP antenna is a coplanar stripline fed dual rhombic loop with an AMC reflector. The proposed AMC reflector not only improves the antenna gain to 9.8 dBi but also decreases the profile to 0.1 λ0. The AMC reflector also makes the antenna have a harmonic suppression function so the low pass filter between the rectifying circuit and the antenna could be omitted and the rectenna has a compact structure. According to the measured results, the rectenna has the highest conversion efficiency of 76% on the load of 240 Ω with the received power of 117.5 mW. When the linearly polarized transmitting antenna is rotated, the conversion efficiency of the CP rectenna maintains a constant high conversion efficiency of 74%. The compact structure and CP operation of the rectenna made it a good candidate of the wireless battery for some electronic devices and far-distance microwave power transmission.
Cesium lead iodide perovskite (CsPbI3) with excellent optical and electrical properties have attracted numerous academic attentions. Specifically, the black cubic phase CsPbI3 with a direct band gap of 1.74 eV has been most appropriate materials for various optoelectronic applications, especially for photovoltaic (PV), Light-Emitting Diodes (LED) and photodetector applications1. However, the preferred cubic phase of bulk CsPbI3 (α-CsPbI3) is usually only stable at high temperatures and it will undergo an immediate phase transformation to orthorhombic phase (δ-CsPbI3) after fabrication at room temperature. In this work, we have discovered a convenient CVD method to investigate the growth behavior of the cubic α-CsPbI3 film on the porous alumina substrate. The lead iodide and cesium iodide were used as the precursors for the deposition of CsPbI3. The porous alumina with high surface area and large pore volume was used as growth substrate. It was shown that the porous alumina promoted the growth of CsPbI3 film by absorbing the precursor and increasing the nucleation density. The prepared CsPbI3 film emitted strong and stable red light under ultraviolet light excitation at room temperature and ambient atmosphere. The lead iodide was absorbed on the surface of the porous alumina firstly then reacted with cesiumiodide to form the CsPbI3. The successful preparation of the CsPbI3 by the direct CVD method paves the way for its large scale growth and application in optoelectronic devices.
A series of metal oxides (MnFeOx, MnCrOx, MnTiOx, and MnFeTiOx) supported on attapulgite (ATP) were synthesized by coprecipitation for the low-temperature selective catalytic reduction (SCR) of NOx with NH3. Then, they were subjected to appropriate characterizations for their properties (XRD, TEM, BET, XPS, etc.). The catalytic activity of MnFeTiOx/ATP catalyst was over 95% NOx conversion within a wide temperature window between of 175 and 300 °C, and 88% N2 selectivity. Moreover, MnFeTiOx/ATP presented excellent potassium resistance relative to the traditional V–W–Ti catalyst, and its denitration performance was significantly improved. The NOx conversion rate could be restored to nearly 90% at 210 °C after removing potassium via washing of K–MnFeTiOx/ATP. In addition, the MnFeTiOx/ATP showed better SO2 resistance and stability than the traditional V–W–Ti catalyst. Therefore, the MnFeTiOx/ATP catalyst has been proved to have broad prospects in NH3-SCR.
Previous studies in schizophrenia revealed abnormalities in the cortico-cerebellar-thalamo-cortical circuit (CCTCC) pathway, suggesting the necessity for defining thalamic subdivisions in understanding alterations of brain connectivity.
To parcellate the thalamus into several subdivisions using a data-driven method, and to evaluate the role of each subdivision in the alterations of CCTCC functional connectivity in patients with schizophrenia.
There were 54 patients with schizophrenia and 42 healthy controls included in this study. First, the thalamic structural and functional connections computed, based on diffusion magnetic resonance imaging (MRI, white matter tractography) and resting-state functional MRI, were clustered to parcellate thalamus. Next, functional connectivity of each thalamus subdivision was investigated, and the alterations in thalamic functional connectivity for patients with schizophrenia were inspected.
Based on the data-driven parcellation method, six thalamic subdivisions were defined. Loss of connectivity was observed between several thalamic subdivisions (superior-anterior, ventromedial and dorsolateral part of the thalamus) and the sensorimotor system, anterior cingulate cortex and cerebellum in patients with schizophrenia. A gradual pattern of dysconnectivity was observed across the thalamic subdivisions. Additionally, the altered connectivity negatively correlated with symptom scores and duration of illness in individuals with schizophrenia.
The findings of the study revealed a wide range of thalamic functional dysconnectivity in the CCTCC pathway, increasing our understanding of the relationship between the CCTCC pathway and symptoms associated with schizophrenia, and further indicating a potential alteration pattern in the thalamic nuclei in people with schizophrenia.
Few studies have examined the association of various types of Fe with colorectal cancer risk. The aim of this study was to investigate different forms and sources of Fe in relation to colorectal cancer risk in a Chinese population. A total of 2138 patients with colorectal cancer and 2144 sex- and age-matched (5-year interval) controls were recruited from July 2010 to November 2017. Dietary information was assessed by face-to-face interviews using a validated FFQ. Multivariable logistic regression was used to estimate the OR and 95 % CI on models. Intake of Fe from plants and Fe from white meat were inversely associated with the risk of colorectal cancer, while haem Fe and Fe from red meat were positively associated with colorectal cancer risk. The multivariable OR for the highest quartile v. the lowest quartile were 0·72 (95 % CI 0·59, 0·87, Ptrend<0·001) for Fe from plants, 0·54 (95 % CI 0·45, 0·66, Ptrend<0·001) for Fe from white meat, 1·26 (95 % CI 1·04, 1·53, Ptrend=0·005) for haem Fe and 1·83 (95 % CI 1·49, 2·24, Ptrend<0·001) for Fe from red meat intake, respectively. However, no significant association was found between the consumption of total dietary Fe, non-haem Fe, Fe from meat and colorectal cancer risk. This study showed that lower intake of Fe from plants and white meat, as well as higher intake of haem Fe and Fe from red meat, were associated with colorectal cancer risk in a Chinese population.
The Zhenzhu Spring, located in the Tengchong volcanic field, Yunnan, China, is an acid hot spring with high SO42− concentrations and intense acid aerosol generation. In order to understand the formation mechanism of sulfate minerals at the Zhenzhu Spring and provide a better insight into the sulfur isotope geochemistry of the associated Rehai hydrothermal system, we investigated the spring water hydrochemistry, mineralogy and major-element geochemistry of sulfate minerals at the Zhenzhu Spring together with the sulfur-oxygen isotope geochemistry of sulfur-containing materials at the Rehai geothermal field and compared the isotope results with those in other steam-heated environments. Subaerial minerals include a wide variety of sulfate minerals (gypsum, alunogen, pickeringite, tamarugite, magnesiovoltaite and a minor Mg–S–O phase) and amorphous SiO2. The δ34S values of the subaerial sulfate minerals at the Zhenzhu Spring varied subtly from –0.33 to 1.88‰ and were almost consistent with the δ34S values of local H2S (–2.6 to 0.6‰) and dissolved SO42− (–0.2 to 5.8‰), while the δ18O values (–8.94 to 20.1‰) were between that of the spring waters (–10.19 to –6.7‰) and atmospheric O2 (~23.88‰). The results suggest that most of the sulfate minerals are derived from the oxidation of H2S, similar to many sulfate minerals from modern steam-heated environments. However, the rapid environmental change (different ratio of atmospheric and water oxygen) at the Zhenzhu Spring accounts for the large variation of δ18O. The formation of subaerial sulfate minerals around the Zhenzhu Spring is related to acid aerosols (vapour and acid water droplets). The intense activity of spring water around vents supply the aerosol with H2SO4 (H2S oxidation and acid water droplets formed by bubble bursting) and few cations. Deposition of the acid sulfate aerosol forms the acid condensate, which attacks the underlying rocks and releases many cations and anions to form subaerial sulfate minerals at the Zhenzhu Spring.