Obesity is an important characteristic manifestation of metabolic syndrome (MetS), and body roundness index (BRI) is one of the anthropometric indicators associated with obesity. However, studies on the relationship between BRI and MetS risk are limited. We aimed to explore the relationship between baseline BRI and MetS in the USA population. Our study used data from the National Health and Nutrition Examination Survey from 1999 to 2018, ultimately enrolling and analysing 47 303 participants. Data-driven tertiles were used to categorise BRI levels, and multivariate logistic regression models were fitted to investigate the association of BRI with MetS in adults. In addition, receiver operating characteristic curve analysis was used to assess the ability of BRI to predict MetS. The distribution of BRI was different across ethnic groups with a gradual decrease in the proportion of non-Hispanic Whites and other races. In addition, BRI was significantly associated with traditional cardiovascular risk factors. Univariate regression analysis indicated BRI to be a moderate risk factor for MetS, and multivariate logistic regression analysis found that BRI remained an independent risk factor for MetS. After adjusting for confounding variables, a non-linear relationship was found between BRI levels and the prevalence of MetS. More importantly, BRI predicted MetS with the largest AUC among anthropometric measures. In summary, elevated baseline BRI levels are independently associated with the development of MetS, and baseline BRI may assist in identifying patients at risk for MetS, leading to early and optimal treatment to improve their outcomes.

An enhanced wideband tracking method for characteristic modes (CMs) is investigated in this paper. The method consists of three stages, and its core tracking stage (CTS) is based on a classical eigenvector correlation-based algorithm. To decrease the tracking time and eliminate the crossing avoidance (CRA), we append a commonly used eigenvalue filter (EF) as the preprocessing stage and a novel postprocessing stage to the CTS. The proposed postprocessing stage can identify all CRA mode pairs by analyzing their trajectory and correlation characteristics. Subsequently, it can predict corresponding CRA frequencies and correct problematic qualities rapidly. Considering potential variations in eigenvector numbers at consecutive frequency samples caused by the EF, a new execution condition for the adaptive frequency adjustment in the CTS is introduced. Finally, CMs of a conductor plate and a fractal structure are investigated to demonstrate the performance of the proposed method, and the obtained results are discussed.

Background. The most common site of prostate cancer metastasis is bone tissue with many recent studies having conducted genomic and clinical research regarding bone metastatic prostate cancer. However, further work is needed to better define those patients that are at an elevated risk of such metastasis. Methods. SEER and TCGA databases were searched to develop a nomogram for predicting prostate cancer bone metastasis. Results. Herein, we leveraged the Surveillance, Epidemiology, and End Results (SEER) database to construct a predictive nomogram capable of readily and accurately predicted the odds of bone metastasis in prostate cancer patients. This nomogram was utilized to assign patients with prostate cancer included in The Cancer Genome Atlas (TCGA) to cohorts at a high or low risk of bone metastasis (HRBM and LRBM, respectively). Comparisons of these LRBM and HRBM cohorts revealed marked differences in mutational landscapes between these patient cohorts, with increased frequencies of gene fusions, somatic copy number variations (CNVs), and single nucleotide variations (SNVs), particularly in the P53 gene, being evident in the HRBM cohort. We additionally identified lncRNAs, miRNAs, and mRNAs that were differentially expressed between these two patient cohorts and used them to construct a competing endogenous RNA (ceRNA) network. Moreover, three weighted gene co-expression network analysis (WGCNA) modules were constructed from the results of these analyses, with KIF14, MYH7, and COL10A1 being identified as hub genes within these modules. We further found immune response activity levels in the HRBM cohort to be elevated relative to that in the LRBM cohort, with single sample gene enrichment analysis (ssGSEA) scores for the immune checkpoint signature being increased in HRBM patient samples relative to those from LRBM patients. Conclusion. We successfully developed a nomogram capable of readily detecting patients with prostate cancer at an elevated risk of bone metastasis.

Organo-montmorillonite (OMnt) has wide applications in paints, clay-polymer nanocomposites, biomaterials, etc. In most cases, the dispersibility and swellability of OMnt dictate the performance of OMnt in the target products. Previous studies have revealed that the properties can be improved when multiple organic species are co-introduced into the interlayer space of montmorillonite (Mnt). In the present study, single surfactant erucylamide (EA), dual-surfactants cetyltrimethyl ammonium bromide (CTAB) and octadecyltrimethyl ammonium chloride (OTAC), and ternary-surfactants EA, CTAB, and OTAC were co-introduced into Mnt by solution intercalation. The resulting OMnts were characterized by powder X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, thermogravimetry-differential thermogravimetry (TG-DTG), water contact-angle tests, scanning electronic microscopy (SEM), laser particle-size analysis, and swelling indices. Mnt co-modified by ternary CTAB, OTAC, and EA led to a large d001 value (4.20 nm), surface hydrophobicity with a contact angle of 95.6°, swellability (50 mL/g) with small average particle sizes (2.1−2.8 μm) in xylene, and >99% of the OMnt particles were kept as <5 μm in deionized water. The formation of EA-modified-Mnt was proposed according to hydrophobic affinity, hydrogen bonding, and van der Waals forces. The nanoplatelets of the CTA+, OTA+, and EA co-modified OMnts in xylene were assembled into a house-of-cards structure by face-to-edge and edge-to-edge associations. The electrostatic attractions, electrostatic and steric repulsions, and hydrophobic interactions were responsible for the good dispersibility of OMnt in xylene. The ternary surfactant co-modified OMnt with high dispersion and swellability will make OMnt better suited for real-world applications.

Soil aggregates consist of sand, silt, and clay size particles. Many of the clay size particles in soils are clay minerals, which actively influence soil behavior. The properties of clay minerals may change significantly as soil particle size decreases to the nanoscale; however, little information is available about these properties for the Ultisols in China. In the present study, the clay mineral components and structural characteristics of four particle-size fractions (i.e., <2000, 450–2000, 100–450, and 25–100 nm) of two Ultisol samples (Ult-1 and Ult-2) were investigated using elemental analysis, X-ray diffraction, Fouriertransform infrared spectroscopy, and thermal analysis. The molar SiO2 to Al2O3 ratios were lower in the nanoscale particle-size fraction (25–100 nm) than in the 450–2000 and <2000 nm fractions. This indicates greater desilicification and allitization of the smaller Ultisol particles. Furthermore, the Fe oxide and Al oxide contents increased and reached a maximum level in the 25–100 nm fraction of the two Ultisols. Goethite was mainly found in the 100–450 nm and 25–100 nm fractions. The dominant clay minerals in the Ultisol 25–100 nm fraction were kaolinite and illite with a small amount of a hydroxy-interlayered mineral in Ult-1 and gibbsite in Ult-2. The kaolinite crystallinity decreased as particle size decreased. The low crystallinity of the kaolinite in the A horizon 25–100 nm fraction was attributed to a reduction in the thickness of coherent scattering domains, as well as to decreases in OH groups and the dimensions of octahedral AlO6 sheets. A determination of the chemical and mineralogic properties of the different size fractions of the Ultisols is important to understand the desilicification and Al and Fe oxide enrichment mechanisms during soil formation. The significance of these results can help to reveal the nanoscale transformations of clay minerals. Analysis of clay mineral compositions in nanoparticles can provide the additional data needed to understand the adsorption and mobility of nutrients and pollutants.

Radio frequency (RF) breakdown can result in pulse shortening and seriously degrade the stability and reliability of relativistic backward wave oscillators (RBWOs). This paper discusses the energy range of electrons causing breakdown traces in slow-wave structures (SWSs) through particle-in-cell (PIC) simulation, numerical calculation, and experimental verification. The PIC simulation and numerical calculation results reveal that the energy of the majority of the field-induced electrons bombarding the SWS surfaces after being accelerated is less than 120 keV. Furthermore, the micro appearances of the breakdown traces in SWSs and the witness targets bombarded directly by electrons of various energy levels have been analyzed. Scanning electron microscope (SEM) shows that the breakdown traces are featured with corrugated morphologies with a wide range and a shallow depth. A mass of craters emerge in the vicinity of the corrugated morphologies. These appearances are quite similar to destructive traces impacted directly by low-energy electrons (around 160 keV). Thus, it is confirmed that the breakdown traces result from the bombardment of low-energy electrons. Therefore, the breakdown mechanism of field-emitted electrons impacting on the structure surfaces in RBWOs has been further improved.

Supersonic gas jets generated via a conical nozzle are widely applied in the laser wakefield acceleration of electrons. The stability of the gas jet is critical to the electron injection and the reproducibility of the wakefield acceleration. Here we discussed the role of the stilling chamber in a modified converging–diverging nozzle to dissipate the turbulence and to stabilize the gas jets. By the fluid dynamics simulations and the Mach–Zehnder interferometer measurements, the instability originating from the nonlinear turbulence is studied and the mechanism to suppress the instability is proposed. Both the numerical and experimental results prove that the carefully designed nozzle with a stilling chamber is able to reduce the perturbation by more than 10% compared with a simple-conical nozzle.

Aging plays a crucial role in the mechanisms of the impacts of genetic and environmental factors on blood pressure and serum lipids. However, to our knowledge, how the influence of genetic and environmental factors on the correlation between blood pressure and serum lipids changes with age remains to be determined. In this study, data from the Chinese National Twin Registry (CNTR) were used. Resting blood pressure, including systolic and diastolic blood pressure (SBP and DBP), and fasting serum lipids, including total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C) and triglycerides (TGs) were measured in 2378 participants (1189 twin pairs). Univariate and bivariate structural equation models examined the genetic and environmental influences on blood pressure and serum lipids among three age groups. All phenotypes showed moderate to high heritability (0.37–0.59) and moderate unique environmental variance (0.30–0.44). The heritability of all phenotypes showed a decreasing trend with age. Among all phenotypes, SBP and DBP showed a significant monotonic decreasing trend. For phenotype-phenotype pairs, the phenotypic correlation (Rph) of each pair ranged from −0.04 to 0.23, and the additive genetic correlation (Ra) ranged from 0.00 to 0.36. For TC&SBP, TC&DBP, TG&SBP and TGs&DBP, both the Rph and Ra declined with age, and the Ra difference between the young group and the older adult group is statistically significant (p < .05). The unique environmental correlation (Re) of each pair did not follow any pattern with age and remained relatively stable with age. In summary, we observed that the heritability of blood pressure was affected by age. Moreover, blood pressure and serum lipids shared common genetic backgrounds, and age had an impact on the phenotypic correlation and genetic correlations.

It is crucial to understand the genetic mechanisms and biological pathways underlying the relationship between obesity and serum lipid levels. Structural equation models (SEMs) were constructed to calculate heritability for body mass index (BMI), total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and the genetic connections between BMI and the four classes of lipids using 1197 pairs of twins from the Chinese National Twin Registry (CNTR). Bivariate genomewide association studies (GWAS) were performed to identify genetic variants associated with BMI and lipids using the records of 457 individuals, and the results were further validated in 289 individuals. The genetic background affecting BMI may differ by gender, and the heritability of males and females was 71% (95% CI [.66, .75]) and 39% (95% CI [.15, .71]) respectively. BMI was positively correlated with TC, TG and LDL-C in phenotypic and genetic correlation, while negatively correlated with HDL-C. There were gender differences in the correlation between BMI and lipids. Bivariate GWAS analysis and validation stage found 7 genes (LOC105378740, LINC02506, CSMD1, MELK, FAM81A, ERAL1 and MIR144) that were possibly related to BMI and lipid levels. The significant biological pathways were the regulation of cholesterol reverse transport and the regulation of high-density lipoprotein particle clearance (p < .001). BMI and blood lipid levels were affected by genetic factors, and they were genetically correlated. There might be gender differences in their genetic correlation. Bivariate GWAS analysis found MIR144 gene and its related biological pathways may influence obesity and lipid levels.

In Rayleigh–Bénard convection, it has been found that the amount of heat passing through the fluid has a power-law dependence on the imposed temperature difference. Modifying this dependence, either enhancing or reducing the heat transfer capability of fluids, is important in many scientific and practical applications. Here, we present a simple means to control the vertical heat transfer in Rayleigh–Bénard convection by injecting heat through one lateral side of the fluid domain and extracting the same amount of heat from the opposite side. This horizontal heat flux regulates the large-scale circulation, and increases the heat transfer rate in the vertical direction. Our numerical and theoretical studies demonstrate how a classical Rayleigh–Bénard convection responds to such a perturbation when the system is near or well above the onset of convection.

With the dangerous and troublesome nature of hollow defects inside building structures, hollowness inspection has always been a challenge in the field of construction quality assessment. Several methods have been proposed for inspecting hollowness inside concrete structures. These methods have shown great advantages compared to manual inspection but still lack autonomy and have several limitations. In this paper, we propose a range-point migration-based non-contact hollowness inspection system with sensor fusion of ultra-wide-band radar and laser-based depth camera to extract both outer surface and inner hollowness information accurately and efficiently. The simulation result evaluates the performance of the system based on the original range-point migration algorithm, and our proposed one and the result of our system show great competitiveness. Several simulation experiments of structures that are very common in reality are carried out to draw more convincing conclusions about the system. At the same time, a set of laboratory-made concrete components were used as experimental objects for the robotic system. Although still accompanied by some problems, these experiments demonstrate the availability of an automated hollow-core detection system.

Sepsis is a clinical syndrome characterised by a severe disorder of pathophysiology caused by infection of pathogenic micro-organisms. The addition of antioxidant micronutrient therapies such as thiamine to sepsis treatment remains controversial. This study explored the effect of thiamine on the prognosis of patients with sepsis. This study was a retrospective study involving patients with sepsis from the Medical Information Mart for Intensive Care IV. Patients were divided into two groups, the thiamine received group (TR) and the thiamine unreceived group (TUR), according to whether they were supplemented with thiamin via intravenous while in the intensive care unit (ICU). The primary outcome was ICU mortality. The association between thiamine and outcome was analysed using the Cox proportional hazards regression model, propensity score matching (PSM), generalised boosted model-based inverse probability of treatment weighting (IPTW) and doubly robust estimation. A total of 11 553 sepsis patients were enrolled in this study. After controlling for potential confounders using Cox regression models, the TR group had a statistically significantly lower ICU mortality risk than the TUR group. The hazard ratio of ICU mortality for the TR group was 0·80 (95 % CI 0·70, 0·93). We obtained the same results after using PSM, IPTW and doubly robust estimation. Supplementation with thiamine has a beneficial effect on the prognosis of patients with sepsis. More randomised controlled trials are needed to confirm the effectiveness of thiamine supplementation in the treatment of sepsis.

Hepatitis B virus-related acute-on-chronic liver failure (HBV-ACLF) is a severe and life-threatening complication, characterised by multi-organ failure and high short-term mortality. However, there is limited information on the impact of various comorbidities on HBV-ACLF in a large population. This study aimed to investigate the relationship between comorbidities, complications and mortality. In this retrospective observational study, we identified 2166 cases of HBV-ACLF hospitalised from January 2010 to March 2018. Demographic data from the patients, medical history, treatment, laboratory indices, comorbidities and complications were collected. The mortality rate in our study group was 47.37%. Type 2 diabetes mellitus was the most common comorbidity, followed by alcoholic liver disease. Spontaneous bacterial peritonitis, pneumonia and hepatic encephalopathy (HE) were common in these patients. Diabetes mellitus and hyperthyroidism are risk factors for death within 90 days, together with gastrointestinal bleeding and HE at admission, HE and hepatorenal syndrome during hospitalisation. Knowledge of risk factors can help identify HBV-ACLF patients with a poor prognosis for HBV-ACLF with comorbidities and complications.

Mammal sex determination depends on whether the X sperm or Y sperm binds to the oocyte during fertilization. If the X sperm joins in oocyte, the offspring will be female, if the Y sperm fertilizes, the offspring will be male. Livestock sex control technology has tremendous value for livestock breeding as it can increase the proportion of female offspring and improve the efficiency of livestock production. This review discusses the detailed differences between mammalian X and Y sperm with respect to their morphology, size, and motility in the reproductive tract and in in vitro conditions, as well as ’omics analysis results. Moreover, research progress in mammalian sex control technology has been summarized.

The quantum defect (QD) is an important issue that demands prompt attention in high-power fiber lasers. A large QD may aggravate the thermal load in the laser, which would impact the frequency, amplitude noise and mode stability, and threaten the security of the high-power laser system. Here, we propose and demonstrate a cladding-pumped Raman fiber laser (RFL) with QD of less than 1%. Using the Raman gain of the boson peak in a phosphorus-doped fiber to enable the cladding pump, the QD is reduced to as low as 0.78% with a 23.7 W output power. To our knowledge, this is the lowest QD ever reported in a cladding-pumped RFL. Furthermore, the output power can be scaled to 47.7 W with a QD of 1.29%. This work not only offers a preliminary platform for the realization of high-power low-QD fiber lasers, but also proves the great potential of low-QD fiber lasers in power scaling.

Primitive lamprophyres in orogenic belts can provide crucial insights into the nature of the subcontinental lithosphere and the relevant deep crust–mantle interactions. This paper reports a suite of relatively primitive lamprophyre dykes from the North Qiangtang, central Tibetan Plateau. Zircon U–Pb ages of the lamprophyre dykes range from 214 Ma to 218 Ma, with a weighted mean age of 216 ± 1 Ma. Most of the lamprophyre samples are similar in geochemical compositions to typical primitive magmas (e.g. high MgO contents, Mg no. values and Cr, with low FeOt/MgO ratios), although they might have experienced a slightly low degree of olivine crystallization, and they show arc-like trace-element patterns and enriched Sr–Nd isotopic composition ((87Sr/86Sr)i = 0.70538–0.70540, ϵNd(t) = −2.96 to −1.65). Those geochemical and isotopic variations indicate that the lamprophyre dykes originated from partial melting of a phlogopite- and spinel-bearing peridotite mantle modified by subduction-related aqueous fluids. Combining with the other regional studies, we propose that slab subduction might have occurred during Late Triassic time, and the rollback of the oceanic lithosphere induced the lamprophyre magmatism in the central Tibetan Plateau.