To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Electric-powered disposable unmanned aerial vehicles (UAVs) have wide applications due to their advantages in terms of long time flight and load capacity. Thus, improving their endurance has become an important task to enhance the performance of these UAVs. To achieve this, we investigated a battery dumping strategy which splits the battery into several packs that are used and dumped in sequence to reduce the dead weight. The Peukert effect is also considered. In this paper, the sensitivity analysis method was employed to analyse the endurance benefits for different battery weight ratios, Peukert constants and capacities, quantitatively. The results show that the endurance benefits are significantly affected by all three parameters. For ideal batteries, the endurance can be improved by 20% and 28% respectively when employing a double-pack or triple-pack battery strategy (for a battery weight ratio of 0.4), but these benefits will fall rapidly if the Peukert constant exceeds 1.0 or the battery weight declines. Besides, the endurance will be 10% longer if the lift coefficient rather than the velocity remains constant after the battery packs are dumped at a Peukert constant of 1.2.
At present, analysis of diet and bladder cancer (BC) is mostly based on the intake of individual foods. The examination of food combinations provides a scope to deal with the complexity and unpredictability of the diet and aims to overcome the limitations of the study of nutrients and foods in isolation. This article aims to demonstrate the usability of supervised data mining methods to extract the food groups related to BC. In order to derive key food groups associated with BC risk, we applied the data mining technique C5.0 with 10-fold cross-validation in the BLadder cancer Epidemiology and Nutritional Determinants study, including data from eighteen case–control and one nested case–cohort study, compromising 8320 BC cases out of 31 551 participants. Dietary data, on the eleven main food groups of the Eurocode 2 Core classification codebook, and relevant non-diet data (i.e. sex, age and smoking status) were available. Primarily, five key food groups were extracted; in order of importance, beverages (non-milk); grains and grain products; vegetables and vegetable products; fats, oils and their products; meats and meat products were associated with BC risk. Since these food groups are corresponded with previously proposed BC-related dietary factors, data mining seems to be a promising technique in the field of nutritional epidemiology and deserves further examination.
Quality-adjusted life-years (QALYs) and disability-adjusted life-years (DALYs) are commonly used in cost-effectiveness analysis (CEA) to measure health benefits. We sought to quantify and explain differences between QALY- and DALY-based cost-effectiveness ratios, and explore whether using one versus the other would materially affect conclusions about an intervention's cost-effectiveness.
We identified CEAs using both QALYs and DALYs from the Tufts Medical Center CEA Registry and Global Health CEA Registry, with a supplemental search to ensure comprehensive literature coverage. We calculated absolute and relative differences between the QALY- and DALY-based ratios, and compared ratios to common benchmarks (e.g., 1× gross domestic product per capita). We converted reported costs into US dollars.
Among eleven published CEAs reporting both QALYs and DALYs, seven focused on pharmaceuticals and infectious disease, and five were conducted in high-income countries. Four studies concluded that the intervention was “dominant” (cost-saving). Among the QALY- and DALY-based ratios reported from the remaining seven studies, absolute differences ranged from approximately $2 to $15,000 per unit of benefit, and relative differences from 6–120 percent, but most differences were modest in comparison with the ratio value itself. The values assigned to utility and disability weights explained most observed differences. In comparison with cost-effectiveness thresholds, conclusions were consistent regardless of the ratio type in ten of eleven cases.
Our results suggest that although QALY- and DALY-based ratios for the same intervention can differ, differences tend to be modest and do not materially affect comparisons to common cost-effectiveness thresholds.
A classic example of microbiome function is its role in nutrient assimilation in both plants and animals, but other less obvious roles are becoming more apparent, particularly in terms of driving infectious and non-infectious disease outcomes and influencing host behaviour. However, numerous biotic and abiotic factors influence the composition of these communities, and host microbiomes can be susceptible to environmental change. How microbial communities will be altered by, and mitigate, the rapid environmental change we can expect in the next few decades remain to be seen. That said, given the enormous range of functional diversity conferred by microbes, there is currently something of a revolution in microbial bioengineering and biotechnology in order to address real-world problems including human and wildlife disease and crop and biofuel production. All of these concepts are explored in further detail throughout the book.
Patients with distributive shock who are unresponsive to traditional vasopressors are commonly considered to have severe distributive shock and are at high mortality risk. Here, we assess the cost-effectiveness of adding angiotensin II to the standard of care (SOC) for severe distributive shock in the US critical care setting from a US payer perspective.
Short-term mortality outcomes were based on 28-day survival rates from the ATHOS-3 study. Long-term outcomes were extrapolated to lifetime survival using individually estimated life expectancies for survivors. Resource use and adverse event costs were drawn from the published literature. Health outcomes evaluated were lives saved, life-years gained, and quality-adjusted life-years (QALYs) gained using utility estimates for the US adult population weighted for sepsis mortality. Deterministic and probabilistic sensitivity analyses assessed uncertainty around results. We analyzed patients with severe distributive shock from the ATHOS-3 clinical trial.
The addition of angiotensin II to the SOC saved .08 lives at Day 28 compared to SOC alone. The cost per life saved was estimated to be $108,884. The addition of angiotensin II to the SOC was projected to result in a gain of .96 life-years and .66 QALYs. This resulted in an incremental cost-effectiveness ratio of $12,843 per QALY. The probability of angiotensin II being cost-effective at a threshold of $50,000 per QALY was 86 percent.
For treatment of severe distributive shock, angiotensin II is cost-effective at acceptable thresholds.
The coronal heating problem is a long-standing perplexing issue. In this study, 13 solar activity indexes are used to investigate their phase relation with the sunspot number (SSN). Only three of them are found to statistically significantly lag the SSN (large-scale magnetic activity) by about one solar rotation period; the three indexes are total solar irradiance (TSI), the modified coronal index, and the solar wind velocity; the former two indexes may represent the long-term variation of energy quantity of the heated photosphere and corona, respectively. The Mount Wilson Sunspot Index (MWSI) and the Magnetic Plage Strength Index (MPSI), which reflect the large- and small-scale magnetic field activities, respectively, are also utilised to investigate their phase relations with the three indexes. The three indexes are found to be much more intimately related to MPSI than to MWSI, and MWSI statistically significantly leads TSI by about one rotation period. The heated corona is found to pulse perfectly in step with the small-scale magnetic activity rather than the large-scale magnetic activity; furthermore, combined with observations, our statistical evidence should thus attribute coronal heating firmly to small-scale magnetic activity phenomena, such as spicules, micro-flares, nano-flares, and others. The photosphere and the corona are synchronously heated, which should seemingly prefer magnetic reconnection heating to wave heating. In the long term, such a coronal heating way is inferred effective. Statistically, it is also small-scale magnetic activity phenomena that produce TSI enhancement. Coronal heating and solar wind acceleration are found to be synchronous, as standard models require.
The elastoplastic behavior of a Functionally Graded Material (FGM) simply supported beam consisting of elastic material A and elastoplastic material B under uniformly distributed load is investigated. A power function is used to describe the volume fractions of the constituent materials, and the average stress of the FGM beam is obtained by using the averaging method. This method can avoid the assumption of the varying properties of the whole material, and can consider the different Possion’s ratios of the different constituent materials. What’s more, only the elastoplastic material B in the FGM beam will yield, and the yield function is determined by the stress of material B only, rather than the average stress of the whole material. The method used in this work is more closer to the real material than the method by assuming the variation of the whole properties of FGM. The theoretical results show a good agreement with the finite element results, which indicates that the method provided in this work is valid. With this method, the variation of the elastic and plastic areas, the stress distribution on the cross section, variation of the curvature and neutral layer, and the residual stress distribution of the FGM beam are discussed through numerical results. This work can provide a new way for the design and in-depth investigation of FGM material.
Although numerous studies have investigated the individual effects of salinity, irrigation and fertilization on soil microbial communities, relatively less attention has been paid to their combined influences, especially using molecular techniques. Based on the field of orthogonal designed test and deoxyribonucleic acid sequencing technology, the effects of saline water irrigation amount, salinity level of irrigation water and nitrogen (N) fertilizer rate on soil bacterial community structure were investigated. The results showed that the irrigation amount was the most dominant factor in determining the bacterial richness and diversity, followed by the irrigation water salinity and N fertilizer rate. The values of Chao1 estimator, abundance-based coverage estimator and Shannon indices decreased with an increase in irrigation amount while increased and then decreased with an increase in irrigation water salinity and N fertilizer rate. The highest soil bacterial richness and diversity were obtained under the least irrigation amount (25 mm), medium irrigation water salinity (4.75 dS/m) and medium N fertilizer rate (350 kg/ha). However, different bacterial phyla were found to respond distinctively to these three factors: irrigation amount significantly affected the relative abundances of Proteobacteria and Chloroflexi; irrigation water salinity mostly affected the members of Actinobacteria, Gemmatimonadetes and Acidobacteria; and N fertilizer rate mainly influenced the Bacteroidetes' abundance. The results presented here revealed that the assessment of soil microbial processes under combined irrigation and fertilization treatments needed to be more careful as more variable consequences would be established by comparing with the influences based on an individual factor, such as irrigation amount or N fertilizer rate.
Quantifying reasonable crop yield gaps and determining potential regions for yield improvement can facilitate regional plant structure adjustment and promote crop production. The current study attempted to evaluate the yield gap in a region at multi-scales through model simulation and farmer investigation. Taking the winter wheat yield gap in the Huang-Huai-Hai farming region (HFR) for the case study, 241 farmers’ fields in four typical high-yield demonstration areas were surveyed to determine the yield limitation index and attainable yield. In addition, the theoretical and realizable yield gap of winter wheat in 386 counties of the HFR was assessed. Results showed that the average field yield of the demonstration plots was 8282 kg/ha, accounting for 0.72 of the potential yield, which represented the highest production in the region. The HFR consists of seven sub-regions designated 2.1–2.7: the largest attainable yield gap existed in the 2.6 sub-region, in the southwest of the HFR, while the smallest was in the 2.2 sub-region, in the northwest of the HFR. With a high irrigated area rate, the yield gap in the 2.2 sub-region could hardly be reduced by increasing irrigation, while a lack of irrigation remained an important limiting factor for narrowing the yield gap in 2.3 sub-region, in the middle of the HFR. Therefore, a multi-scale yield gap evaluation framework integrated with typical field survey and crop model analysis could provide valuable information for narrowing the yield gap.
Lygus Hahn (Hemiptera: Miridae) feeding in faba beans (Vicia faba Linnaeus (Fabaceae)) often results in a reduction in seed quality and economic losses. Traditionally, seed damage is assessed subjectively through visual examination by a trained individual, but the use of non-destructive imaging to evaluate seed quality is gaining momentum. The focus of this study was to determine the ability to quantify Lygus species damage in faba bean using shortwave-infrared imaging and two analysis techniques: (1) spectral angle mapper and (2) simple reflectance indices. Seed samples were visually assessed for damage before imaging in 242 wavebands between 980 and 2500 nm. Four spectral intervals, involving 102 wavebands, were identified as optimal for the detection of seed damage using spectral angle mapper. A strong relationship was obtained between the area of seed damage derived using spectral angle mapper and visually (R2 = 0.95). Seed damage derived by thresholding of two normalised faba bean damage indices involving reflectance at 1086 and 1313 nm and 2218 and 2342 nm also showed a strong relationship with the visual assessment (R2 = 0.92). The two image analysis techniques provided similar results. The study suggests that imaging in the shortwave-infrared wavelengths and the derivation of simple indices can effectively quantify faba bean damage by Lygus feeding.
The interaction between galaxies is believed to be the main origin of the peculiarities of galaxies. It can disturb not only the morphology but also the kinematics of galaxies. These disturbed and asymmetric features are the indicators of galaxy interaction. We study the velocity field of ionized gas in galaxy pairs based on MaNGA survey. Using the kinemetry package, we fit the velocity field and quantify the degree of kinematic asymmetry. We find that the fraction of high kinematic asymmetry is much higher for galaxy pairs with dp⩽30h−1kpc. Moreover, compared to a control sample of single galaxies, we find that the star formation rate is enhanced in paired galaxies with high kinematic asymmetry. For paired galaxies with low kinematic asymmetry, no significant SFR enhancement has been found. The galaxy pairs with high kinematic asymmetry are more likely to be real interacting galaxies rather than projected pairs.
The very high temperature reactor (VHTR) is a development of the high-temperature gas-cooled reactors (HTGRs) and one of the six proposed Generation IV reactor concept candidates. The 10 MW high temperature gas-cooled reactor (HTR-10) is the first pebble-bed gas-cooled test reactor in China. A sampling system for the measurement of carbon-14 (14C) was established in the helium purification system of the HTR-10 primary loop, which could sample 14C from the coolant at three locations. The results showed that activity concentration of 14C in the HTR-10 primary coolant was 1.2(1) × 102 Bq/m3 (STP). The production mechanisms, distribution characteristics, reduction routes, and release types of 14C in HTR-10 were analyzed and discussed. A theoretical model was built to calculate the amount of 14C in the core of HTR-10 and its concentration in the primary coolant. The activation reaction of 13C has been identified to be the dominant 14C source in the core, whereas in the primary coolant, it is the activation of 14N. These results can supplement important information for the source term analysis of 14C in HTR-10 and promote the study of 14C in HTGRs.
The strong-coupling mode, called the “quasimode”, is excited by stimulated Brillouin scattering (SBS) in high-intensity laser–plasma interactions. Also SBS of the quasimode competes with SBS of the fast mode (or slow mode) in multi-ion species plasmas, thus leading to a low-frequency burst behavior of SBS reflectivity. Competition between the quasimode and the ion-acoustic wave (IAW) is an important saturation mechanism of SBS in high-intensity laser–plasma interactions. These results give a clear explanation of the low-frequency periodic burst behavior of SBS and should be considered as a saturation mechanism of SBS in high-intensity laser–plasma interactions.
Using a family systems perspective, we examined the trajectories of father-child and mother-child closeness and conflict across Grades 1, 3, 4, 5, and 6, and their associations with child depressive symptoms across middle childhood among 685 families in the Eunice Kennedy Shriver National Institute of Child Health and Human Development Study of Early Child Care and Youth Development (SECCYD). Father-child and mother-child relationship conflict increased, whereas relationship closeness decreased from Grades 1 to 6. Girls with more slowly increasing father-child conflict, and more slowly decreasing father-child closeness, were at lower risk for depressive symptoms. Boys with more slowly increasing mother-child conflict were at lower risk for depressive symptoms. These findings highlight the important roles of both father-child and mother-child relationships in children's emotional adjustment during middle childhood.
The fate of a contracting liquid filament depends on the Ohnesorge number (
), the initial aspect ratio (
) and surface perturbation. Generally, it is believed that there exists a critical aspect ratio
such that longer filaments break up and shorter ones recoil into a single drop. Through computational and experimental studies, we report a transitional regime for filaments with a broad range of intermediate aspect ratios, where there exist multiple
thresholds at which a novel breakup mode alternates with no-break mode. We develop a simple model considering the superposition of capillary waves, which can predict the complicated new phase diagram. In this model, the breakup results from constructive interference between the capillary waves that originate from the ends of the filament.
Liquid films can be entrained when the dewetting velocity attains a threshold, and this dynamical wetting transition has been well studied in the situation of plane substrates. We investigate the forced dewetting in a capillary tube using diffuse-interface simulations and lubrication analysis, focusing on the onset of wetting transition and subsequent interface evolution. Results show that the meniscus remains stable when the displacing rate is below a threshold, beyond which film entrainment occurs and eventually leads to the formation of Taylor bubbles separated by liquid slugs, as has also been observed in the recent experiments of Zhao et al. (Phys. Rev. Lett., vol. 120, 2018, 084501). We derive an analytical solution of the critical capillary number, and demonstrate that the wetting transition is accompanied by a vanishing apparent contact angle and an abrupt drop of the contact-line velocity. Both the bubble and slug lengths are found to depend on the capillary number and the wettability of the wall. A theoretical formula for the bubble length is also proposed and compares favourably with numerical and experimental results.
We propose an alternative to the prevailing framework for modelling tear-film breakup, which posits a layered structure with a mucus layer next to the cornea and an aqueous layer on top. Experimental evidence shows continuous variation of mucin concentration throughout the tear film, with no distinct boundary between the two layers. Thus, we consider a continuous-viscosity model that replaces the mucus and aqueous layers by a single liquid layer with continuous profiles of mucin concentration and viscosity, which are governed by advection–diffusion of mucin. The lipids coating the tear film are treated as insoluble surfactants as previously, and slip is allowed on the ocular surface. Using the thin-film approximation, we carry out linear stability analysis and nonlinear numerical simulations of tear-film breakup driven by van der Waals attraction. Results show that for the same average viscosity, having more viscous material near the ocular surface stabilizes the film and prolongs the breakup time. Compared with the layered models, the continuous-viscosity model predicts film breakup times that are in better agreement with experimental data. Finally, we also suggest a hydrodynamic explanation for how pathological loss of membrane-associated mucins may lead to faster breakup.