Estimating the feed intake of grazing herbivores is critical for determining their nutrition, overall productivity and utilization of grassland resources. A 17-day indoor feeding experiment was conducted to evaluate the potential use of Medicago sativa as a natural supplement for estimating the total feed intake of sheep. A total of 16 sheep were randomly assigned to four diets (four sheep per diet) containing a known amount of M. sativa together with up to seven forages common to typical steppes. The diets were: diet 1, M. sativa + Leymus chinensis + Puccinellia distans; diet 2, species in diet 1 + Phragmites australis; diet 3, species in diet 2 + Chenopodium album + Elymus sibiricus; and diet 4, species in diet 3 + Artemisia scoparia + Artemisia tanacetifolia. After faecal marker concentrations were corrected by individual sheep recovery, treatment mean recovery or overall recovery, the proportions of M. sativa and other dietary forages were estimated from a combination of alkanes and long-chain alcohols using a least-square procedure. Total intake was the ratio of the known intake of M. sativa to its estimated dietary proportion. Each dietary component intake was obtained using total intake and the corresponding dietary proportions. The estimated values were compared with actual values to assess the estimation accuracy. The results showed that M. sativa exhibited a distinguishable marker pattern in comparison to the other dietary forage species. The accuracy of the dietary composition estimates was significantly (P < 0.001) affected by both diet diversity and the faecal recovery method. The proportion of M. sativa and total intake across all diets could be accurately estimated using the individual sheep or the treatment mean recovery methods. The largest differences between the estimated and observed total intake were 2.6 g and 19.2 g, respectively, representing only 0.4% and 2.6% of the total intake. However, they were significantly (P < 0.05) biased for most diets when using the overall recovery method. Due to the difficulty in obtaining individual sheep recovery under field conditions, treatment mean recovery is recommended. This study suggests that M. sativa, a natural roughage instead of a labelled concentrate, can be utilized as a dietary supplement to accurately estimate the total feed intake of sheep indoors and further indicates that it has potential to be used in steppe grassland of northern China, where the marker patterns of M. sativa differ markedly from commonly occurring plant species.

Chitinase is responsible for insect chitin hydrolyzation, which is a key process in insect molting and pupation. However, little is known about the chitinase of Spodoptera exigua (SeChi). In this study, based on the SeChi gene (ADI24346) identified in our laboratory, we constructed the recombinant baculovirus P-Chi for the expression of recombinant SeChi (rSeChi) in Hi5 cells. The rSeChi was purified by chelate affinity chromatography, and the purified protein showed activity comparable with that of a commercial SgChi, suggesting that we harvested active SeChi for the first time. The purified protein was subsequently tested for enzymatic properties and revealed to exhibit its highest activity at pH 8 and 40 C. Using homology modeling and molecular docking techniques, the three-dimensional model of SeChi was constructed and screened for inhibitors. In two rounds of screening, twenty compounds were selected. With the purified rSeChi, we tested each of the twenty compounds for inhibitor activity against rSeChi, and seven compounds showed obvious activity. This study provided new information for the chitinase of beet armyworm and for chitinase inhibitor development.

In our previous study, we observed a lack of $\left\{ {10\bar{1}2} \right\}$ twinning in a deformed Mg–Y alloy, which contributed to the observed yield “symmetry.” However, the effects of texture and grain size on polycrystalline deformation made it difficult to fully understand why twinning was not active. Therefore, we report herein in-depth study by in situ transmission electron microscopy, i.e., in situ TEM. The in situ deformation of nano-sized Mg–Y pillars revealed that prismatic slip was favored over twinning, namely, the critical stress required to activate prismatic slip was lower than that for twinning. This finding diametrically differs from that reported in other nano/micro-pillar deformation studies, where twinning is always the dominant deformation mechanism. By measuring the critical stresses for basal, prismatic, and pyramidal slip systems, this in situ TEM study also sheds light on the effects of the alloying element Y on reducing the intrinsic plastic anisotropy in the Mg matrix.

The Beck’s Petrel Pseudobulweria beckii is a ‘Critically Endangered’ seabird whose breeding sites remain unknown. Historic observations suggest the species’ distribution is concentrated in the Bismarck Archipelago and particularly southern New Ireland. Over the course of two research expeditions in 2016 and 2017 we used on-land and at-sea observations, local interviews and satellite telemetry to understand the distribution of the species, its at-sea movements and potential breeding locations. Land-based and at-sea observations indicated that the area of Silur Bay in southern New Ireland was a significant site for Beck’s Petrel with numbers of birds increasing near shore prior to dusk and birds observed in spotlights over land. A local population is estimated to be in the low thousands. In 2017 a single Beck’s was captured at sea, fitted with a satellite transmitter and tracked for eight months. This bird maintained a core distribution off the south-east coast of New Ireland and north of Bougainville for 122 days. During the tracking period, the bird was located over land at night seven times; predominantly over southern New Ireland, where the signal was also lost for extended periods suggesting occupancy of an underground burrow. In August the bird migrated 1,400 km to a core pelagic habitat north of West Papua before the signal was eventually lost. Our combination of land- and sea-based observations and analysis of behaviour from satellite tracking supports the conclusion that a breeding site for Beck’s Petrel lies in the inland mountains of southern New Ireland and most likely in the high-altitude zone (> 2000 m) of the Hans Meyer Range. Further investigations are required to determine the exact location of breeding colonies in the mountains of southern New Ireland and the importance of a potential west Papuan non-breeding pelagic habitat for the species.

Co-receptor tropism has been identified to correlate with HIV-1 transmission and the disease progression in patients. A molecular epidemiology investigation of co-receptor tropism is important for clinical practice and effective control of HIV-1. In this study, we investigated the co-receptor tropism on HIV-1 variants of 85 antiretroviral-naive patients with Geno2pheno algorithm at a false-positive rate of 10%. Our data showed that a majority of the subjects harboured the CCR5-tropic virus (81.2%, 69/85). No significant differences in gender, age, baseline CD4+ T-cell counts and transmission routes were observed between subjects infected with CXCR4-tropic or CCR5-tropic virus. The co-receptor tropism appeared to be associated with the virus genotype; a significantly more CXCR4-use was predicted in CRF01_AE infections whereas all CRF07_BC and CRF08_BC were predicted to use CCR5 co-receptor. Sequences analysis of V3 revealed a higher median net charge in the CXCR4 viruses over CCR5 viruses (4.0 vs. 3.0, P < 0.05). The predicted N-linked glycosylation site between amino acids 6 and 8 in the V3 region was conserved in CCR5 viruses, but not in CXCR4 viruses. Besides, variable crown motifs were observed in both CCR5 and CXCR4 viruses, of which the most prevalent motif GPGQ existed in both viral tropism and almost all genotypes identified in this study except subtype B. These findings may offer important implications for clinical practice and enhance our understanding of HIV-1 biology.

Solid state batteries are an emerging alternative to traditional liquid electrolyte cells that provide potential for safe and high-energy density power sources. This report describes a self-forming, solid state battery based on the Li/I2 couple using an LiI-rich LiI(3-hydroxypropionitrile)2 electrolyte (LiI–LiI(HPN)2). As the negative and positive active materials are generated in situ, the solid electrolyte–current collector interfaces play a critical role in determining the electrochemical response of the battery. Herein, we report the investigation of solid electrolyte–current collector interfaces with a self-forming LiI–LiI(HPN)2 solid electrolyte and the role of varying interface design in reducing resistance during cycling.

Laser–solid interactions are highly suited as a potential source of high energy X-rays for nondestructive imaging. A bright, energetic X-ray pulse can be driven from a small source, making it ideal for high resolution X-ray radiography. By limiting the lateral dimensions of the target we are able to confine the region over which X-rays are produced, enabling imaging with enhanced resolution and contrast. Using constrained targets we demonstrate experimentally a $(20\pm 3)~\unicode[STIX]{x03BC}\text{m}$ X-ray source, improving the image quality compared to unconstrained foil targets. Modelling demonstrates that a larger sheath field envelope around the perimeter of the constrained targets increases the proportion of electron current that recirculates through the target, driving a brighter source of X-rays.

Imprinted genes uniquely drive and support fetoplacental growth by controlling the allocation of maternal resources to the fetus and affecting the newborn’s growth. We previously showed that alterations of the placental imprinted gene expression are associated with suboptimal perinatal growth and respond to environmental stimuli including socio-economic determinants. At the same time, maternal psychosocial stress during pregnancy (MPSP) has been shown to affect fetal growth. Here, we set out to test the hypothesis that placental imprinted gene expression mediates the effects of MPSP on fetal growth in a well-characterized birth cohort, the Stress in Pregnancy (SIP) Study. We observed that mothers experiencing high MPSP deliver infants with lower birthweight (P=0.047). Among the 109 imprinted genes tested, we detected panels of placental imprinted gene expression of 23 imprinted genes associated with MPSP and 26 with birthweight. Among these genes, five imprinted genes (CPXM2, glucosidase alpha acid (GAA), GPR1, SH3 and multiple ankyrin repeat domains 2 (SHANK2) and THSD7A) were common to the two panels. In multivariate analyses, controlling for maternal age and education and gestational age at birth and infant gender, two genes, GAA and SHANK2, each showed a 22% mediation of MPSP on fetal growth. These data provide new insights into the role that imprinted genes play in translating the maternal stress message into a fetoplacental growth pattern.

A series of nanostructured Fe/Ag metal films were produced at various substrate temperatures to determine their magnetic characteristics. The magnetic coercivity was found to increase with the diffracting-particle size which is process controlled. The films produced at low substrate temperature (<200°C) consisted of small metallic clusters of Ag (<100 Å). As the substrate temperature was increased, the films exhibited increased crystallinity and larger diffracting-particle size. The position of the maximum in the particlesize distribution function and the width of the function increased with substrate temperature.

Hematite (α-Fe2O3) powder compacts have been subjected to controlled, quantitative high pressure shock loading at peak pressures from 8-27 GPa and preserved for post shook analysis. The broadened x-ray diffraction peak profiles have been analyzed to determine the residual lattice strain and the coherent crystallite sizes. Maximum modification effects are observed near 17 GPa with strain values near 3 x 10-3 and size values near 200 Å suggesting annealing at higher shock pressure, resulting from the higher shock temperature.

X-ray diffraction topography is the name given to several x-ray diffraction techniques where large area x-ray beams diffracted from a crystal provide detailed information about the surface structure and internal perfection of crystal microstructures. Since x-ray topographic techniques are based on Bragg (reflection) or Laue (transmission) diffraction from a crystal lattice, they are extremely sensitive to any atomic lattice imperfections and strains. Alterations of the interplanar spacing as small as one part in ten thousand extending over a reasonable number of atomic ce11 lengths can be recorded as a corresponding change in the diffracted beam intensity. Line Modified-Asymmetric Crystal Topography (LM-ACT) is one such reflection technique that shows particular promise in Che field of microelectronics. The LM-ACT system is designed with low angular divergence in the x-ray beam probe. Low probe beam divergence allows details of device geometries on the order of microns to be resolved in the recorded x-ray intensity variation of the diffracted beam.

The LM-ACT system was applied here to the study of integrated circuits (IC) after specific processing steps were accomplished during IC fabrication and in the final product condition. Topographs obtained from specular crystal surfaces that were implanted through a patterned mask showed contrast variations between the implanted and non-implanted regions; details of the mask patterns have been resolved on the order of a few microns. LMACT topographs from annealed, and unannealed, Implanted specimens showed marked differences and as a result it is suggested that LM-ACT would be beneficial in optimizing the processing schedule for a particular wafer/electronic system. A significant feature of the LM-ACT technique is the capability for producing high resolution stereo-pair topographs that provide quantitative information through the depth of individual process layers in an integrated circuit.

This paper reports and discusses the results of a computer modeling study on powder diffraction profile analysis for crystallite size and strain of polycrystalline materials. The results of this computer modeling show that if the spans of diffraction profiles in reciprocal space (1/d) are not carefully chosen, an overestimation on size and an underestimation on strain may result in analysis by both the Warren-Averbach and the Hall-Williamson methods. A general way to eliminate such errors based on profile fitting and regeneration is presented and discussed in this paper.

The aim of the study was to investigate any association between extrauterine growth restriction (EUGR) and intestinal flora of <30-week-old preterm infants. A total of 59 preterm infants were assigned to EUGR (n=23) and non-EUGR (n=36) groups. Intestinal bacteria were compared by using high-throughput sequencing of bacterial rRNA. The total abundance of bacteria in 344 genera (7568 v. 13,760; P<0.0001) and 456 species (10,032 v. 18,240; P<0.0001) was significantly decreased in the EUGR group compared with the non-EUGR group. After application of a multivariate logistic model and adjusting for potential confounding factors, as well as false-discovery rate corrections, we found four bacterial genera with higher and one bacterial genus with lower abundance in the EUGR group compared with the control group. In addition, the EUGR group showed significantly increased abundances of six species (Streptococcus parasanguinis, Bacterium RB5FF6, two Klebsiella species and Microbacterium), but decreased frequencies of three species (one Acinetobacter species, Endosymbiont_of_Sphenophorus_lev and one Enterobacter_species) compared with the non-EUGR group. Taken together, there were significant changes in the intestinal microflora of preterm infants with EUGR compared to preterm infants without EUGR.

Music or other background sounds are often played in barns as environmental enrichment for animals on farms or to mask sudden disruptive noises. Previous studies looking at the effects of this practice on non-human animal well-being and productivity have found contradictory results. However, there is still a lack of discussion on whether piglets have the ability to distinguish different types of music. In this study, we exposed piglets to different music conditions to investigate whether the piglets preferred certain music types, in which case those types would have the potential to be used as environmental enrichment. In total, 30 piglets were tested for music type preference to determine whether growing pigs respond differently to different types of music. We used music from two families of instruments (S: string, W: wind) and with two tempos (S: slow, 65 beats/min (bpm); F: fast, 200 bpm), providing four music-type combinations (SS: string-slow; SF: string-fast; WS: wind-slow; WF: wind-fast). The piglets were given a choice between two chambers, one with no music and the other with one of the four types of music, and their behaviour was observed. The results showed that SS and WF music significantly increased residence time (P<0.01) compared with the other music conditions. Compared with the control group (with no music), the different music conditions led to different behavioural responses, where SS music significantly increased lying (P<0.01) and exploration behaviour (P<0.01); SF music significantly increased tail-wagging behaviour (P<0.01); WS music significantly increased exploration (P<0.01); and WF music significantly increased walking, lying, standing and exploration (all P<0.01). The results also showed that musical instruments and tempo had little effect on most of the behaviours. Fast-tempo music significantly increased walking (P=0.02), standing (P<0.01) and tail wagging (P=0.04) compared with slow-tempo music. In conclusion, the results of this experiment show that piglets are more sensitive to tempo than to musical instruments in their response to musical stimulation and seem to prefer SS and WF music to the other two types. The results also suggest a need for further research on the effect of music types on animals.

Recent molecular dynamics simulations revealed that 〈c + a〉 dislocations in Mg were prone to dissociation on the basal plane, thus becoming sessile. Basal dissociation of 〈c + a〉 dislocations is significant because it is a major factor in the limited ductility and high work-hardening in Mg. We report an in situ transmission electron microscopy study of the deformation process using an H-bar-shaped thin foil of Mg single crystal designed to facilitate 〈c + a〉 slip, observe 〈c + a〉 dislocation activity, and establish the validity of the largely immobile 〈c + a〉 dislocations caused by the predicted basal dissociation. In addition, through detailed observations on the fine movement of some 〈c + a〉 dislocations, it was revealed that limited bowing out movement for some non-basal portions of 〈c + a〉 dislocations was possible; under certain circumstances, i.e., through attraction and reaction between two 〈c + a〉 dislocations on the same pyramidal plane, at least portions of the sessile configuration were observed to be reversed into a glissile one.