This paper retrospectively analysed the prevalence of macrolide-resistant Mycoplasma pneumoniae (MRMP) in some parts of China. Between January 2013 and December 2019, we collected 4,145 respiratory samples, including pharyngeal swabs and alveolar lavage fluid. The highest PCR-positive rate of M. pneumoniae was 74.5% in Beijing, the highest resistance rate was 100% in Shanghai, and Gansu was the lowest with 20%. The highest PCR-positive rate of M. pneumoniae was 74.5% in 2013, and the highest MRMP was 97.4% in 2019; the PCR-positive rate of M. pneumoniae for adults in Beijing was 17.9% and the MRMP was 10.48%. Among the children diagnosed with community-acquired pneumonia (CAP), the PCR-positive and macrolide-resistant rates of M. pneumoniae were both higher in the severe ones. A2063G in domain V of 23S rRNA was the major macrolide-resistant mutation, accounting for more than 90%. The MIC values of all MRMP to erythromycin and azithromycin were ≥ 64 μg/ml, and the MICs of tetracycline and levofloxacin were ≤ 0.5 μg/ml and ≤ 1 μg/ml, respectively. The macrolide resistance varied in different regions and years. Among inpatients, the macrolide-resistant rate was higher in severe pneumonia. A2063G was the common mutation, and we found no resistance to tetracycline and levofloxacin.

Data on epidemiology trends of paediatric tuberculosis (TB) are limited in China. So, we investigated the clinical and epidemiological profiles in diagnosed TB disease and TB infection patients at Beijing Children’s Hospital. Of 3 193 patients, 51.05% had pulmonary TB (PTB) and 15.16% had extrapulmonary TB (EPTB). The most frequent forms of EPTB were TB meningitis (39.05%), pleural TB (29.75%), and disseminated TB (10.33%). PTB patients were significantly younger and associated with higher hospitalization frequency. Children aged 1–4 years exhibited higher risk of PTB and TB meningitis, and children aged 5–12 years had higher risk of EPTB. The proportion of PTB patients increased slightly from 40.9% in 2012 to 65% in 2019, and then decreased to 17.8% in 2021. The percentage of EPTB cases decreased from 18.3% in 2012 to 15.2% in 2019, but increased to 16.4% in 2021. Among EPTB cases, the largest increase was seen in TB meningitis. In conclusion, female and young children had higher risk of PTB in children. TB meningitis was the most frequent forms of EPTB among children, and young children were at high risk of TB meningitis. The distribution of different types of EPTB differed by age.

SARS-CoV-2 rapidly spreads among humans via social networks, with social mixing and network characteristics potentially facilitating transmission. However, limited data on topological structural features has hindered in-depth studies. Existing research is based on snapshot analyses, preventing temporal investigations of network changes. Comparing network characteristics over time offers additional insights into transmission dynamics. We examined confirmed COVID-19 patients from an eastern Chinese province, analyzing social mixing and network characteristics using transmission network topology before and after widespread interventions. Between the two time periods, the percentage of singleton networks increased from 38.9$ \% $ to 62.8$ \% $$ (p<0.001) $; the average shortest path length decreased from 1.53 to 1.14 $ (p<0.001) $; the average betweenness reduced from 0.65 to 0.11$ (p<0.001) $; the average cluster size dropped from 4.05 to 2.72 $ (p=0.004) $; and the out-degree had a slight but nonsignificant decline from 0.75 to 0.63 $ (p=0.099). $ Results show that nonpharmaceutical interventions effectively disrupted transmission networks, preventing further disease spread. Additionally, we found that the networks’ dynamic structure provided more information than solely examining infection curves after applying descriptive and agent-based modeling approaches. In summary, we investigated social mixing and network characteristics of COVID-19 patients during different pandemic stages, revealing transmission network heterogeneities.

This paper investigates whether pollution-intensive industries develop faster in a time of economic downturn. Using firm-level panel data from 2005 to 2013, we find supporting empirical results in an analysis of China's manufacturing industries in the 2008 economic crisis. We find that pollution-intensive firms tended to produce more compared with non-pollution-intensive firms in the 2008 economic crisis, with the pre-crisis period as a baseline. We further find that this effect is more pronounced in areas with higher export dependence and a smaller proportion of production from pollution-intensive industries. The relatively faster production expansion in pollution-intensive industries is more evident for state-owned enterprises.

Soft robots can perform effectively inspecting than rigid robots in some special environments such as nuclear pipelines and high-voltage cables. This article presents a versatile quadruped soft rod-climbing robot (SR-CR) that consists of four bending actuators and a telescopic actuator. The bending actuator is composed of flexible bellows with multiple folding air chambers, elastic telescopic layer (ETL), and strain-limiting layer (SLL). The telescopic actuator provides the energy for the robot to climb forward. The SR-CR is activated by a control strategy that alternates the body deformation and feet pneumatic clenched for stable climbing. The robot can climb rods at 90°, with the maximum speed of up to 2.33 mm/s (0.018 body length/s). At 0.83 HZ, the maximum moving speed of the robot in climbing horizontally parallel rods can reach 18.43 mm/s. In addition, the SR-CR can also achieve multiple impressive functions, including turning around a corner at a rate of 7 mm/s (0.054 body length/s), carrying a payload of 3.7 times its self-weight on horizontal rods at a speed of 9 mm/s (0.069 body length/s).

In this research paper we filter and verify miRNAs which may target silent information regulator homolog 2 (SIRT2) gene and then describe the mechanism whereby miRNA-212 might regulate lipogenic genes in mammary epithelial cell lines via targeting SIRT2. Bioinformatics analysis revealed that the bovine SIRT2 gene is regulated by three miRNAs: miR-212, miR-375 and miR-655. The three miRNAs were verified and screened by qRT-PCR, western blot, and luciferase multiplex verification techniques and only miR-212 was shown to have a targeting relationship with SIRT2. The results of co-transfecting miR-212 and silencing RNA (siRNA) showed that by targeting SIRT2, miR-212 can regulate the expression of fatty acid synthetase (FASN) and sterol regulatory element binding factor 1 (SREBP1) but not peroxisome proliferator-activated receptor gamma (PPARγ). Measurement of triglyceride (TAG) content showed that miR-212 increased the fat content of mammary epithelial cell lines. The study indicates that miR-212 could target and inhibit the expression of the SIRT2 gene to promote lipogenesis in mammary epithelial cell lines.

Annexin A2 (ANXA2) is reported to be associated with cancer development. To investigate the roles ANXA2 plays during the development of cancer, the RNAi method was used to inhibit the ANXA2 expression in caco2 (human colorectal cancer cell line) and SMMC7721 (human hepatocarcinoma cell line) cells. The results showed that when the expression of ANXA2 was efficiently inhibited, the growth and motility of both cell lines were significantly decreased, and the development of the motility relevant microstructures, such as pseudopodia, filopodia, and the polymerization of microfilaments and microtubules were obviously inhibited. The cancer cell apoptosis was enhanced without obvious significance. The possible regulating pathway in the process was also predicted and discussed. Our results suggested that ANXA2 plays important roles in maintaining the malignancy of colorectal and hepatic cancer by enhancing the cell proliferation, motility, and development of the motility associated microstructures of cancer cells based on a possible complicated signal pathway.

The research reported in this Research Communication aimed to describe the influence of Toll-like receptor 4 gene polymorphisms on milk production traits in Chinese Holstein cows. Toll-like receptor 4 (TLR4) is an important member of the toll-like receptor gene family that is widely found in various organisms. Since TLR4 can identify molecular patterns from various pathogenic microorganisms and induce natural and acquired immunity, it plays an important role in disease resistance in dairy cows. Two single nucleotide polymorphisms (SNPs) of TLR4 (c.−226 G > C and c.2021 C > T) that were previously found to be associated with health traits were genotyped using Sequenom MassARRAY (Sequenom Inc., San Diego, CA) for Chinese Holstein cows (n = 866). The associations between SNPs or their haplotypes and milk production traits and somatic cell count were analyzed by the generalized linear model procedure of Statistics Analysis System software (SAS). The c.−226 G > C and c.2021 C > T showed low linkage disequilibrium (r2 = 0·192). There was no association between these two SNPs and SCC, but significant effects were found for SNP c.−226 G > C on test-day milk yield, fat content, protein content, and total solid and milk urea nitrogen (P < 0·05), and SNP c.2021 C > T and the SNP haplotypes on test-day milk yield, fat content, protein content, lactose content and total solids (P < 0·05). The software MatInspector revealed that c.−226 G > C was located within several potential transcription factor binding sites, including transcription factor AP-2. The polymorphisms c.−226 G > C and c.2021 C > T had significant effects on the milk production for Chinese Holstein, and these SNP could be used for molecular marker-assisted selection of milk production.

The influence of the content of trifluoroacetate (TFA), in the precursor solution, on the critical current density (Jc) of YBa2Cu3O7−x (YBCO) superconducting films was investigated. We found that a TFA/Ba ratio of 0.68 is optimal to obtain high-performance YBCO films. Using this optimal solution, we then developed an ultraviolet (UV) light soaking technique to prepare YBCO films. This resulted in the constituent elements being uniformly distributed in the films, and this then enabled enhanced Jc. The addition of water vapor during the UV soaking process decreased the content of carbon residue in the films, and further increased the Jc of the resulting YBCO films.

A noncentrosymmetric aluminum borate crystal, Al5BO9, was obtained via high-temperature solution method. Considering the structure diversities of Al5BO9, the single crystal structure was cautiously redetermined before the investigation. The fundamental building blocks of the structure are BO3 triangles, AlO4 tetrahedra, and AlO6 octahedra. Since Al5BO9 only consists of strong covalent B–O and Al–O bonds, it is worth investigating the structure–optical property relationship thoroughly, especially the linear and nonlinear optical properties. To gain further insight into the origin of the nonlinear optical response of Al5BO9, the electronic structure calculations, second harmonic generation (SHG)-weighted electron density, and dipole moment of polyhedra were analyzed in detail. All evidences deduced from calculated results indicate that the SHG contribution from the Al–O polyhedra is more pronounced than that of the BO3 group in Al5BO9, which is anticipated to open a window for the search and design of new inorganic materials.

To obtain highly dispersed and highly active catalysts by impregnating of active species onto the monolith directly, cordierite honeycomb ceramics were modified by nitric acid solution of 68wt%. Effects of acid treatment temperature and time on the performance of cordierite were investigated. Specific surface area, pore size distribution, morphology and structure of cordierite were characterized by N2-physical adsorption, SEM, XRD, respectively. Concentrations of ions in the acid solution were measured by AAS. It is shown that the corrosion content of cordierite increases and more micropores are generated with increasing time of acid treatment, leading to an upward trend of specific surface area. The coefficient of thermal expansion and compression strength decrease obviously at a higher temperature, which is mainly attributed to the removal of Al and Mg ions from the silicate structure and delayed formation of free amorphous silica on the surface of the cordierite. The optimal modification process of cordierite matrix acid erosion is at 110°C for 6 h.