The sequential occurrence of three layers of smooth muscle layers (SML) in human embryos and fetus is not known. Here, we investigated the process of gut SML development in human embryos and fetuses and compared the morphology of SML in fetuses and neonates. The H&E, Masson trichrome staining, and Immunohistochemistry were conducted on 6–12 gestation week human embryos and fetuses and on normal neonatal intestine. We showed that no lumen was seen in 6–7th gestation week embryonic gut, neither gut wall nor SML was developed in this period. In 8–9th gestation week embryonic and fetal gut, primitive inner circular SML (IC-SML) was identified in a narrow and discontinuous gut lumen with some vacuoles. In 10th gestation week fetal gut, the outer longitudinal SML (OL-SML) in gut wall was clearly identifiable, both the inner and outer SML expressed α-SMA. In 11–12th gestation week fetal gut, in addition to the IC-SML and OL-SML, the muscularis mucosae started to develop as revealed by α-SMA immune-reactivity beneath the developing mucosal epithelial layer. Comparing with the gut of fetuses of 11–12th week of gestation, the muscularis mucosae, IC-SML, and OL-SML of neonatal intestine displayed different morphology, including branching into glands of lamina propria in mucosa and increased thickness. In conclusions, in the human developing gut between week-8 to week-12 of gestation, the IC-SML develops and forms at week-8, followed by the formation of OL-SML at week-10, and the muscularis mucosae develops and forms last at week-12.

Manganese (Mn) oxides have been prevalent on Earth since before the Great Oxidation Event and the Mn cycle is one of the most important biogeochemical processes on the Earth's surface. In sunlit natural environments, the photochemistry of Mn oxides has been discovered to enable solar energy harvesting and conversion in both geological and biological systems. One of the most widespread Mn oxides is birnessite, which is a semiconducting layered mineral that actively drives Mn photochemical cycling in Nature. The oxygen-evolving centre in biological photosystem II (PSII) is also a Mn-cluster of Mn4CaO5, which transforms into a birnessite-like structure during the photocatalytic oxygen evolution process. This phenomenon draws the potential parallel of Mn-functioned photoreactions between the organic and inorganic world. The Mn photoredox cycling involves both the photo-oxidation of Mn(II) and the photoreductive dissolution of Mn(IV/III) oxides. In Nature, the occurrence of Mn(IV/III) photoreduction is usually accompanied with the oxidative degradation of natural organics. For Mn(II) oxidation into Mn oxides, mechanisms of biological catalysis mediated by microorganisms (such as Pseudomonas putida and Bacillus species) and abiotic photoreactions by semiconducting minerals or reactive oxygen species have both been proposed. In particular, anaerobic Mn(II) photo-oxidation processes have been demonstrated experimentally, which shed light on Mn oxide emergence before atmospheric oxygenation on Earth. This review provides a comprehensive and up-to-date elaboration of Mn oxide photoredox cycling in Nature, and gives brand-new insight into the photochemical properties of semiconducting Mn oxides widespread on the Earth's surface.

This paper presents a parameterized gait generator based on linear inverted pendulum model (LIPM) theory, which allows users to generate a natural gait pattern with desired step sizes. Five types of zero moment point (ZMP) components are proposed for formulating a natural ZMP reference, where ZMP moves continuously during single support phases instead of staying at a fixed point in the sagittal and lateral plane. The corresponding center of mass (CoM) trajectories for these components are derived by LIPM theory. To generate a parameterized gait pattern with user-defined parameters, a gait planning algorithm is proposed, which determines related coefficients and boundary conditions of the CoM trajectory for each step. The proposed parameterized gait generator also provides a concept for users to generate gait patterns with self-defined ZMP references by using different components. Finally, the feasibility of the proposed method is validated by the experimental results with a teen-sized humanoid robot, David, which won first place in the sprint event at the 20th Federation of International Robot-soccer Association (FIRA) RoboWorld Cup.

We present results of a regional comparative study of surface mass changes from 2004 to 2008 based on Gravity Recovery and Climate Experiment (GRACE), The Ice, Cloud and Land Elevation Satellite (ICESat) and CHINARE observations over the Lambert Glacier/Amery Ice Shelf system (LAS). Estimation of the ICESat mass change rates benefitted from the density measurements along the CHINARE traverse and a spatial density adjustment method for reducing the effect of spatial density variations. In the high-elevation inland region, a positive trend was estimated from both ICESat and GRACE data, which is in line with the CHINARE accumulation measurements. In the coastal region, there were areas with high level accumulations in both ICESat and GRACE trend maps. In many high flow-speed glacier areas, negative mass change rates may be caused by dynamic ice flow discharges that have surpassed the snow accumulation. Overall, the mass change rate estimate in the LAS of 2004–2008 from the GRACE, ICESat and CHINARE data is 5.41 ± 4.59 Gt a−1, indicating a balanced to slightly positive mass trend. Along with other published results, this suggests that a longer-term positive mass trend in the LAS may have slowed in recent years.

Environmental filtering and competitive interactions are important ecological processes in community assembly. The contribution of the two processes to community assembly can be evaluated by shifts in functional diversity patterns. We examined the correlations between functional diversity of six traits (leaf chlorophyll concentration, dry matter content, size, specific leaf area, thickness and wood density) and environmental gradients (topography and soil) for 92 species in the 20-ha Dinghushan forest plot in China. A partial Mantel test showed that most of the community-weighted mean trait values changed with terrain convexity and soil fertility, which implied that environmental filtering was occurring. Functional diversity of many traits significantly increased with increasing terrain convexity and soil fertility, which was associated with increased light and below-ground resources respectively. These results suggest that co-occurring species are functionally convergent in regions of strong abiotic stress under the environmental filtering, but functionally divergent in more benign environments due to resource partitioning and competitive interactions. Single-trait diversity and multivariate functional diversity had different relationships with environmental factors, indicating that traits were related to different niche axes, and associated with different ecological processes, which demonstrated the importance of focusing niche axes in traits selection. Between 9% and 41% of variation in functional diversity of different traits was explained by environmental factors in stepwise multiple regression models. Terrain convexity and soil fertility were the best predictors of functional diversity, which contributed 30.5% and 29.0% of total R2 to the model. These provided essential evidence that different environmental factors had distinguishing impacts on regulating diversity of traits.

In spite of previous reports documented that many beneficial effects can be obtained by adding rare earth (RE) elements to Pb-free solders, this paper presents the risk of Sn whisker growth in the Sn–9Zn–0.5Ga Pb-free solders due to the addition of RE Pr. Results showed that solder microstructures are refined with the addition of trace amount of Pr. However, excessive Pr addition led to the formation of Pr–Sn intermetallic compounds (IMCs) and spontaneous growth of Sn whiskers on the IMC surfaces. It was found that the IMC size has a dramatic impact on whisker growth. Sn whiskers grew in slow-cooled solder with larger IMC particles are much longer and more prolific than that in fast-cooled solder with smaller IMC size. It was proposed that the driving force for whisker growth is originated from the oxidation of the RE-rich Pr–Sn IMCs. Our results indicated that the effects of RE on Pb-free solders should be reevaluated.

The effects of some factors on the isolation of protoplasts from Penicillium digitatum were studied, including the appropriate material (young mycelia and generating spores), the concentrations of enzyme and osmotic pressure stabilizers, reaction time and reaction temperature. Results demonstrated that germinating spores were an ideal material resource for the isolation of P. digitatum protoplasts. Highest yield and quality of P. digitatum protoplasts were obtained by shaking germinating spores suspended in a solution of 10 mg/ml Lywallzyme™ dissolved in 0.7 M NaCl as osmotic pressure stabilizer at 80 rev/min and 30°C for 3.0–3.5 h. The regeneration rate of the isolated protoplasts was as high as 24.9% on double-layer Czapek medium containing 0.7 M NaCl. Additionally, observation of the protoplast release pattern showed that the protoplasts of P. digitatum were released primarily from the hyphal apex and occasionally from the subapical or original sites of germinating tubes. The protoplasts of P. digitatum were regenerated in a direct manner of either yeast-like cell development or mycelium formation.

Chemical bath deposition (CBD) techniques for the growth of CdS polycrystalline thin films are now well developed. However, there usually appear different structures, grain sizes and energy gaps in CdS polycrystalline films by CBD, which implies that the influence of growth process on the structures and properties of CBD CdS thin films must be considered. In this paper, the optical, compositional and structural properties of CBD CdS thin films in the reaction process have been studied by XRD, AFM, XPS and optical transmission spectra measurements. The results can be explained using atomic mechanism and lattice transition in the CdS thin films.