Prenatal exposure to mercury in utero causes abnormal foetal growth and adverse outcomes. DNA methylation is currently considered a possible mechanism through which this occurs. However, few studies have investigated the association between prenatal exposure to mercury and DNA methylation in detail. This study aimed to clarify the relationship between prenatal exposure to total mercury (Hg) and DNA methylation and its associations with sex-specific characteristics in male and female offspring. In a birth cohort study known as the Chiba study of Mother and Child Health, the DNA methylation status in cord tissue and Hg concentrations in cord serum were examined. A total of 67 participants (27 males and 40 females) were analysed based on Spearmanʼs correlations, adjusted by a false discovery rate of the sex of each offspring. Only one methylated locus was positively correlated with Hg concentrations in cord serum in male offspring, but not in female offspring, and was annotated to the haloacid dehalogenase-like hydrolase domain-containing protein 1 (HDHD1) gene on chromosome X. This locus was located in the intron of the HDHD1 gene body and is a binding site for the zinc finger protein CCCTC-binding factor. One of the other loci, located in HDHD1, was highly methylated in the group with higher mercury concentrations, and this locus was in the gene body of HDHD1. Our results suggest that prenatal exposure to Hg might affect the epigenetic status of male foetuses.

Maternal gut microbiota is thought to be one of the important factors in the developmental origins of health and disease (DOHaD) concept, but the effects of maternal gut microbiota on foetal growth are not well known. In this study, the association between maternal gut microbiota and foetal growth was investigated. Maternal and newborn information, as well as stool samples at the third trimester of pregnancy, were obtained from 51 mother–newborn pairs from the Chiba study of Mother and Child Health (C-MACH). Gut microbiota was analysed by 16S rRNA sequencing of stool samples and short-chain fatty acids (SCFAs) in stool were analysed by gas chromatography-tandem mass spectrometry. After adjustment for covariates, it was found that maternal gut microbial diversity had a positive association with head circumference in newborn males (Chao 1: adjusted r = 0.515, p = 0.029). Genus Parabacteroides and genus Eggerthella showed negative associations with newborn head circumference and weight, respectively in males (genus Parabacteroides: adjusted r = −0.598, p = 0.009, genus Eggerthella: adjusted r = −0.481, p = 0.043). On the other hand, genus Streptococcus showed a negative association with newborn height in females (adjusted r = −0.413, p = 0.040). In addition, hexanoate was involved in the association between maternal gut microbiota and newborn anthropometrics in the univariate analysis, but not in the multivariate analysis. These data suggest that maternal gut microbiota has sex-specific effects on foetal growth. Maternal gut microbiota is an important factor for optimal intrauterine growth.

The carbon-14 generated in Zircaloy (Zry) hull waste is considered an important radionuclide in the TRU waste geological disposal concept in Japan. Given that the metal Zry is highly corrosion-resistant in the anaerobic and low-temperature conditions of the repository, and that the C-14 release rate is assumed to be controlled by the corrosion rate, a variety of corrosion and leaching tests have been performed. However, since the Zry corrosion rate is extremely slow, it is not possible to predict long-term corrosion behavior through low-temperature corrosion tests conducted in a reasonable time period. A vast amount of testing has been conducted in the higher-temperature range of 523 to 633 K, and corrosion correlations have been obtained from these tests. Corrosion correlations have been used to predict the corrosion rate of Zry in a tuff repository. Long-term Zry autoclave corrosion data have been analyzed to develop new corrosion correlations. Extrapolating these correlations to a lower temperature range requires verification that the mechanisms do not change over the range of testing and extrapolation. Factors that influence corrosion rates under geological disposal conditions, such as material and environmental factors, should also be examined. Corrosion correlations, factors influencing corrosion rates, the results of corrosion and leaching tests, and a preliminary evaluation are discussed.

In order to analyze the C-14 inventory and leaching rate for safety evaluation of transuranic waste disposal, it is necessary to establish an analytical method that can measure C-14 with sufficient precision [1]. Oxidative decomposition of organic compounds containing C-14 is carried out to absorb carbon dioxide (CO2) in an alkaline solution, which is mixed with a liquid scintillation cocktail, and the amount C-14 is quantified by measuring a beta ray spectrum with a liquid scintillation counter. It has been difficult to completely decompose carbon compounds in a sample, even to CO2, by using conventional oxidizing agents. In the work described here, we improved the method of oxidative decomposition used to completely decompose carbon compounds using peroxydisulfuric acid (K2S2O8). When C-14 in the form of CO2 was absorbed in a sodium hydroxide (NaOH) aqueous solution, only 80% of the actually used quantity was detected. Total organic carbon measurements showed that the entire quantity of CO2 was absorbed by NaOH. When NaOH aqueous solution was used, it was found that only the analytical value was 80%. The entire quantity of the actually used carbon could be measured by absorbing the CO2 in Carbo-Sorb®. An anion form and a neutral molecule exist in the organic compound released from activated metals. In order to identify organic compounds efficiently, fractionation into an anion and a neutral molecule and separation by high performance liquid chromatography (HPLC) are necessary. Here, we propose the combined use of an ion exchange resin and HPLC as an improved technique for identification of the chemical species.

Corrosion behavior is a key issue in the assessment of disposal performance for activated waste such as spent fuel assemblies (i.e., hulls and end-pieces) because corrosion is expected to initiate radionuclide (e.g., C-14) leaching from such waste. Because the anticipated corrosion rate is extremely low, understanding and modeling Zircaloy (Zry) corrosion behavior under geological disposal conditions is important in predicting very long-term corrosion. Corrosion models applicable in the higher temperature ranges of nuclear reactors have been proposed based on considerable testing in the 523−633 K temperature range.

In this study, corrosion tests were carried out to confirm the applicability of such existing models to the low temperature range of geological disposal, and to examine the influence of material, environmental, and other factors on corrosion rates under geological disposal conditions. A characterization analysis of the generated oxide film was also performed.

To confirm applicability, the corrosion rate of Zry-4 in pure water with a temperature change from 303 K to 433 K was obtained using a hydrogen measuring technique, giving a corrosion rate for 180 days of 8 × 10-3 μm/y at 303 K.

To investigate the influence of various factors, corrosion tests were carried out. The corrosion rates for Zry-2 and Zry-4 were almost same, and increased with a temperature increase from 303 K to 353 K. The influence of pH (12.5) compared with pure water was about 1.4 at 180 days at 303 K.

C-14 contained in Hull waste is one of the most important radionuclides in the safety assessment of transuranic (TRU) waste disposal. For more realistic safety assessment, it is important to clarify the release mechanism and chemical species of C-14 from Hull waste. In this research, leaching tests were conducted using an irradiated Zry cladding tube from a boiling-water reactor (BWR) to obtain leaching data and to investigate the relationship between Zry metal corrosion and C-14 release behavior. Both organic and inorganic C-14 compounds existed in the the liquid phase, and some C-14 moved to the gaseous phase. The release rate of C-14 obtained from the BWR cladding tube after two-year leaching tests was lower than the release rate from a pressurize water reactor (PWR) cladding tube. It is considered that the BWR cladding tube used in this test did not easily corrode since it used a comparatively new material. The release rate of C-14 was slightly lower as compared with the corrosion rate of unirradiated Zry. This is thought to be the result of improved corrosion resistance conferred by neutron irradiation, which encouraged the dissolution of grain boundary precipitation elements, such as Fe, Cr, and Ni, into the crystal grains. The leaching tests will be continued for 10 years.

The chemical forms of carbon leaching from carbon-containing Zr and Fe-based metallic materials have been investigated to improve the estimation of the contribution of C-14 in the performance assessment of TRU waste disposal. Both organic and inorganic carbons were identified in the leached solution with carbon containing zirconium and steel, and the concentrations of total carbon (organic plus inorganic) in the leached solutions increased with time. The carbon concentrations in the leached solution for both metallic samples were higher at higher pH. With High Performance Liquid Chromatography (HPLC), organic carbons were identified to be low-molecular weight alcohols, carboxylic acids and aldehydes.

To explore the chemical state of carbon in the matrix materials, the leaching experiments were carried out also for ZrC, Fe3C, the powder mixtures of carbon and zirconium, and of carbon and iron. The low-molecular weight organic carbons were detected only in the case of carbides (ZrC and Fe3C). The chemical forms of carbon in the zirconium alloy were suggested to be carbide or carbon by H.D. Smith[1]. The present result suggests that the chemical forms of carbon in zirconium or iron are mainly in the form of carbide.

In the interest of performance assessment, the distribution coefficients of the organic carbon species identified in the leached solution for cement were obtained. As expected, some of them were shown to be larger than the values assumed in the performance assessment of Progress Report on Disposal Concept for TRU Waste in Japan[2].