Hydrogen sulfide (H2S) has been shown to play a significant role in oxidative stress across various tissues and cells; however, its role in sperm function remains poorly understood. This study aimed to investigate the protective effect of GYY4137, a slow-releasing H2S compound, on sperm damage induced by H2O2. We assessed the effects of GYY4137 on motility, viability, lipid peroxidation and caspase-3 activity in human spermatozoa in vitro following oxidative damage mediated by H2O2. Spermatozoa from 25 healthy men were selected using a density gradient centrifugation method and cultured in the presence or absence of 10 μM H2O2, followed by incubation with varying concentrations of GYY4137 (0.625–2.5 μM). After 24 h of incubation, sperm motility, viability, lipid peroxidation, and caspase-3 activity were evaluated. The results indicated that H2O2 adversely affected sperm parameters, reducing motility and viability, while increasing oxidative stress, as evidenced by elevated lipid peroxidation and caspase-3 activity. GYY4137 provided dose-dependent protection against H2O2-induced oxidative stress (OS). We concluded that supplementation with GYY4137 may offer antioxidant protection during in vitro sperm preparation for assisted reproductive technology.

The shock wave accelerating a heavy fluid layer can induce reverberating waves that continuously interact with the first and second interfaces. In order to manipulate the perturbation growths at fluid-layer interfaces, we present a theoretical framework to eliminate the reverberating waves. A model is established to predict the individual freeze-out (i.e. stagnation of perturbation growth) for the first and second interfaces under specific flow conditions determined based on the shock dynamics theory. The theoretical model quantifies the controllable parameters required for freeze-out, including the initial amplitudes of the first and second interfaces, the interface coupling strength and the maximum initial layer thickness preventing the second interface's phase reversal. The effectiveness of the model in predicting individual freeze-out for the first and second interfaces is validated numerically over a wide range of initial conditions. The upper and lower limits of initial amplitudes for the freeze-out of the whole fluid-layer width growth are further predicted. Within this amplitude range, a slightly higher initial amplitude for the second interface is specified, effectively arresting the growth of the entire fluid-layer width before the phase reversal of the second interface.

The impact of a liquid droplet with another droplet or onto a solid surface are important basic processes that occur in many applications such as agricultural sprays and inkjet printing, and in nature such as pathogens transport by raindrops. We investigated the head-on collision of unequal-size droplets of the same liquid on wetting surfaces using the direct numerical simulations technique at different size ratios. The unsteady Navier–Stokes equations are solved and the liquid–gas interface is tracked using the geometric volume-of-fluid method. The numerical model is validated by comparing simulation results of two extreme cases of droplets bouncing with the experimental data from previous studies and the agreement is quite accurate. The validated model is employed to simulate droplets bouncing at several size ratios at different Weber numbers and Ohnesorge number. Two distinct regimes are identified, namely, the inertial regime, where the restitution coefficient is a constant value close to 0.3, the viscous regime, where the restitution coefficient declines. To understand the bouncing behaviour, the velocity field is analysed and an energy budget calculation is performed. The distribution of the sessile droplet energy is found to be important and the sessile droplet surface energy is calculated by its deformation characteristics such as crater depth. Finally, a scaling analysis is performed to rationalize the insensitivity of the coefficient of restitution in the inertial regime, and its decline in the viscous regime, at large size ratios.

This study presents novel findings on stochastic electron heating via a random electron cyclotron wave (ECW) in a spherical tokamak. Hard x ray measurements demonstrate the time evolution of hard x ray counts at different energy bands, consistent with predictions from the stochastic heating model. The ECW heating rate shows a positive correlation with applied power, confirming the effectiveness of stochastic heating. Remarkably, the ECW-driven plasma current remains insensitive to ECW incidence angle, consistent with model predictions. The observed stochastic heating of electrons offers potential for exploring innovative non-inductive current drive modes in spherical tokamaks. This research contributes to the understanding of plasma behaviour and motivates the development of new models for non-inductive current drive in fusion devices.

This paper studies the synchronization control of the blanket remote maintenance robot (BRMR) of the China fusion engineering test reactor (CFETR). First, the general state space mathematical model of BRMR was established by using a physical-based method. Second, based on the receding horizon optimization of model predictive control (MPC) and cross-coupling error reduction in cross-coupling control (CCC), the innovative MPC-CCC controller was proposed to realize the single-system and multisystem error convergence and high accuracy transportation of blanket through the high accuracy synchronization control of BRMR. Third, to verify the control effectiveness of the MPC-CCC controller, two types of simulations and experiments were implied compared with the original proportional-integral (PI) controller in Mover. Results showed that simulation and experiments were highly consistent. It is found that the use of an MPC-CCC controller can result in up to a 70% reduction in displacement error and up to a 59% reduction in synchronization error compared to the PI controller. And the accuracy of the MPC-CCC controller satisfies the real requirement of the maintenance process of the blanket. This work provides the theoretical basis and practical experience for the highly stable, safe, and efficient maintenance of blankets in the future.

The discharged capillary plasma channel has been extensively studied as a high-gradient particle acceleration and transmission medium. A novel measurement method of plasma channel density profiles has been employed, where the role of plasma channels guiding the advantages of lasers has shown strong appeal. Here, we have studied the high-order transverse plasma density profile distribution using a channel-guided laser, and made detailed measurements of its evolution under various parameters. The paraxial wave equation in a plasma channel with high-order density profile components is analyzed, and the approximate propagation process based on the Gaussian profile laser is obtained on this basis, which agrees well with the simulation under phase conditions. In the experiments, by measuring the integrated transverse laser intensities at the outlet of the channels, the radial quartic density profiles of the plasma channels have been obtained. By precisely synchronizing the detection laser pulses and the plasma channels at various moments, the reconstructed density profile shows an evolution from the radial quartic profile to the quasi-parabolic profile, and the high-order component is indicated as an exponential decline tendency over time. Factors affecting the evolution rate were investigated by varying the incentive source and capillary parameters. It can be found that the discharge voltages and currents are positive factors quickening the evolution, while the electron-ion heating, capillary radii and pressures are negative ones. One plausible explanation is that quartic profile contributions may be linked to plasma heating. This work helps one to understand the mechanisms of the formation, the evolutions of the guiding channel electron-density profiles and their dependences on the external controllable parameters. It provides support and reflection for physical research on discharged capillary plasma and optimizing plasma channels in various applications.

A new isolated out-of-phase filtering power divider/combiner with high selectivity is presented. Based on a single-layer microstrip, required coupling strength and phase difference are achieved by two pairs of three-line coupled feeding structures. To realize desired bandpass responses, a specific resonator is located between the input and output coupled structures. By connecting a half-wavelength transmission line which is centrally loaded with a grounded resistor between two output ports, high port-to-port isolation is attained. Based on the impedance matrix of coupled three-line structure, theoretical filtering responses are predicted with the specified bandwidth and return loss. For demonstration, a prototype is designed, fabricated, and tested. Both simulated and measured results are displayed to verify the design mechanism.

A clear understanding of the solid-state reaction of kaolinite (Kln), quartz (Qtz), and sodium carbonate (Na2CO3) is of great significance for the process optimization of coal gangue calcined with Na2CO3. In this work, a comparative study of the isothermal solid-state reaction systems of Kln–Na2CO3 and Kln–Qtz–Na2CO3 was performed by means of X-ray diffraction (XRD), scanning electron microscope, and energy dispersion spectroscopy (SEM-EDS). The results showed that the calcined products both for these reaction systems mainly contain different kinds of sodium aluminum silicates (e.g., NaAlSiO4, Na1.55Al1.55Si0.45O4, and Na1.95Al1.95Si0.05O4) and various kinds of sodium silicates (e.g., Na2Si3O7, Na2SiO3, and Na6Si2O7). The mass percentage of Na2CO3 played a key role in the phase transformation, determining the Na/Al/Si molar ratio of the formed sodium aluminum silicates. Compared with the reaction system of Kln–Na2CO3, the existence of Qtz inhibited the formation of sodium aluminum silicates in the reaction system of Kln–Qtz–Na2CO3. It should be noted that the formed phases both for these reaction systems were slightly different from that of the thermodynamical calculated results of Na2O–SiO2–Al2O3 using FactSage™ software. According to both the experimental and calculated results, a reasonable batching area for coal gangue activation was proposed that the addition of Na2CO3 should be in the range of 20–50% of the total mass of Kln, Qtz, and Na2CO3.

An Exact Affine Stone Index demand model is estimated to analyze the household-level demand for nine nut products (peanuts, pecans, almonds, cashews, walnuts, pistachios, mixed nuts, macadamia nuts, and other nuts) in the United States using Nielsen Homescan panel data from 2009 through 2015. The demands for all nuts are elastic. All nut products are necessities and substitutes for each other. Household sociodemographic characteristics are statistically significant drivers of the demand for nut products. Finally, the effects of changes in the magnitude of selected promotion expenditure elasticities for nuts are simulated to determine their impacts on prices and quantities demanded.

Due to the lack of research between the inner layers in the structure of colonic mucous and the metabolism of fatty acid in the constipation model, we aim to determine the changes in the mucous phenotype of the colonic glycocalyx and the microbial community structure following treatment with Rhubarb extract in our research. The constipation and treatment models are generated using adult male C57BL/6N mice. We perform light microscopy and transmission electron microscopy (TEM) to detect a Muc2-rich inner mucus layer attached to mice colon under different conditions. In addition, 16S rDNA sequencing is performed to examine the intestinal flora. According to TEM images, we demonstrate that Rhubarb can promote mucin secretion and find direct evidence of dendritic structure-linked mucus structures with its assembly into a lamellar network in a pore size distribution in the isolated colon section. Moreover, the diversity of intestinal flora has noticeable changes in constipated mice. The present study characterizes a dendritic structure and persistent cross-links have significant changes accompanied by the alteration of intestinal flora in feces in models of constipation and pretreatment with Rhubarb extract.

Mounting evidence suggests that the first few months of life are critical for the development of obesity. The relationships between the timing of solid food introduction and the risk of childhood obesity have been examined previously; however, evidence for the association of timing of infant formula introduction remains scarce. This study aimed to examine whether the timing of infant formula introduction is associated with growth z-scores and overweight at ages 1 and 3 years. This study included 5733 full-term (≥ 37 gestational weeks) and normal birth weight (≥ 2500 and < 4000 g) children in the Born in Guangzhou Cohort Study, a prospective cohort study with data collected at 6 weeks, 6, 12 and 36 months. Compared with infant formula introduction at 0–3 months, introduction at 4–6 months was associated with the lower BMI, weight-for-age and weight-for-length z-scores at 1 and 3 years old. Also, introduction at 4–6 months was associated with the lower odds of at-risk of overweight at age 1 (adjusted OR 0·72, 95 % CI 0·55, 0·94) and 3 years (adjusted OR 0·50, 95 % CI 0·30, 0·85). Introduction at 4–6 months also decreased the odds of overweight at age 1 year (adjusted OR 0·42, 95 % CI 0·21, 0·84) but not at age 3 years. Based on our findings, compared with introduction within the first 3 months, introduction at 4–6 months has a reduction on later high BMI risk and at-risk of overweight. However, these results need to be replicated in other well-designed studies before more firm recommendations can be made.

This study examined the influences of coated folic acid (CFA) and coated riboflavin (CRF) on bull performance, nutrients digestion and ruminal fermentation. Forty-eight Angus bulls based on a randomised block and 2 × 2 factorial design were assigned to four treatments. The CFA of 0 or 6 mg of folic acid/kg DM was supplemented in diets with CRF 0 or 60 mg riboflavin (RF)/kg DM. Supplementation of CRF in diets with CFA had greater increase in daily weight gain and feed efficiency than in diets without CFA. Supplementation with CFA or CRF enhanced digestibility of DM, organic matter, crude protein, neutral-detergent fibre and non-fibre carbohydrate. Ruminal pH and ammonia N content decreased and total volatile fatty acids concentration and acetate to propionate ratio elevated for CFA or CRF addition. Supplement of CFA or CRF increased the activities of fibrolytic enzymes and the numbers of total bacteria, protozoa, fungi, dominant fibrolytic bacteria and Prevotella ruminicola. The activities of α-amylase, protease and pectinase and the numbers of Butyrivibrio fibrisolvens and Ruminobacter amylophilus were increased by CFA but were unaffected by CRF. Blood concentration of folate elevated and homocysteine decreased for CFA addition. The CRF supplementation elevated blood concentrations of folate and RF. These findings suggested that CFA or CRF inclusion had facilitating effects on performance and ruminal fermentation, and combined addition of CFA and CRF had greater increase in performance than CFA or CRF addition alone in bulls.

We performed U–Pb dating of detrital zircons and conducted petrological and whole-rock geochemical analyses to assess the provenance of the Upper Triassic – Lower Jurassic clastic rocks in the southeastern margin of the South China Block. Detrital zircon U–Pb ages are mainly classified into age groups of 2000–1700, 900–700, 490–390 and 280–210 Ma, consistent with derivation from the Jiangnan orogenic belt, Nanling Belt, as well as Wuyi and Yunkai domains. Lower Jurassic samples yield a special main age population of 200–190 Ma, and these detrital zircon grains have low Th/U and Nb/Hf ratios and high Th/Nb and Hf/Th ratios, showing they are derived from a continental magmatic arc. However, the cross-correlation and likeness coefficients of kernel density estimates of Upper Triassic and Lower Jurassic sandstones are 0.8608 and 0.8403, indicating that their populations are highly similar. Since the tectonic setting is the key factor in controlling the relationship between source and sink, the stable supply of identical provenance suggests that the tectonic setting did not significantly change during Late Triassic – Early Jurassic time. Sandstone petrography, regional facies distribution and the detrital zircon age patterns all reflect a consistent tectonic setting for the South China Block during Late Triassic – Early Jurassic time. The Palaeo-Pacific subduction therefore did not control the tectonic evolution of the South China Block until after the Early Jurassic Epoch.