To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure firstname.lastname@example.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
At a global level, dairy cow production systems (DCPS) are important sources of nourishment and profits, but they generate environmental impacts such as overexploitation of different resources including water, lands and fossil energy. Quantification of water and carbon footprint to define mitigation strategies and a more rational use of natural resources, is a reiterated claim. The aim of this study was to perform an economic evaluation of the environmental impact of the DCPS from the Comarca Lagunera, Mexico (24°N, 102°W, 220 mm, hot-semiarid climate) We contrasted the economic value (EV) generated by the DCPS with respect to the economic costs (EC) due to the greenhouse gas emissions (GHGE) and the water footprint (WFP) of this DCPS. While quantifications of GHGE considered those proposed by the Intergovernmental Panel on Climate Change, the WFP involved the use of blue, gray and green water by the DCPS and related activities. Quantification of the EC of WFP considered an international average price of water. In the year 2017, the Comarca Lagunera registered a dairy cow inventory of 493 144 heads, with 227 142 lactating cows, which produced 2386 million liters of milk per year with an annual average EV of €525.3 million. The EC (€, millions) generated by the GHGE and WFP were €311.8 and €11 980.7, respectively, with a total EC of € 12 292.5 million. When the EV of milk production and the total environmental EC are compared, the contrast demonstrates not only the noteworthy environmental impact but also the significant and senseless biological and EC. In addition, having a large dairy cow concentration creates pollution concerns and the DCPS transfers both nutrients and water resources from an ecologically vulnerable arid region. Therefore, some mitigation strategies such as, better cow genotype, feed and manure management combined with the production of forages and grains in a different geographical region are suggested to promote an optimum use of water in order to uphold the social, economic and biologic sustainability of the Comarca Lagunera, Mexico.
Composites from carbon nanotubes and polymers have been synthesized and studied. The composites were obtained joining carbon nanotubes with polymethyl methacrylate, nylon-6 and polystyrene. The materials were observed through scanning electron microscopy to evaluate the carbon nanotubes dispersion in the polymeric matrices. FTIR and Raman spectroscopies were used to analyze the interactions among functionalized and non-functionalized multiwalled carbon nanotubes and polymers, demonstrating affinity and peculiar spectra behaviors for each composite with different carbon nanotubes loads.
Inclusion of legume in grass pastures optimizes protein values of the forage and promotes improved digestibility. Therefore, we hypothesized that finishing steers on a novel combination of legumes and grass pasture would produce carcasses with acceptable traits when compared to carcasses from steers finished in feedlot systems. In this study, we evaluated the effects of finishing steers on three systems including: grazing legume–grass pasture containing oats, ryegrass, white and red clover (PAST), grazing PAST plus supplementation with whole corn grain (14 g/kg BW (SUPP)), and on a feedlot-confined system with concentrate only (28 g/kg BW, consisting of 850 g/kg of whole corn grain and 150 g/kg of protein–mineral–vitamin supplement (GRAIN)) on growth performance of steers, carcass traits and digestive disorders. Eighteen steers were randomly assigned to one of three dietary treatments and finished for 91 days. Data regarding pasture and growth performance were collected during three different periods (0 to 28, 29 to 56 and 57 to 91 days). Subsequently, steers were harvested to evaluate carcass traits, presence of rumenitis, abomasitis and liver abscesses. The legume–grass pasture provided more than 19% dry matter of protein. In addition, pasture of paddocks where steers were assigned to SUPP and PAST treatments showed similar nutritional quality. When compared to PAST, finishing on SUPP increased total weight gain per hectare, stocking rate, daily and total weight gains. The increase of weight gain was high to GRAIN than SUPP and PAST. Steers finished on GRAIN had high hot carcass weight, fat thickness and marbling score when compared to PAST. However, these attributes did not differ between GRAIN and SUPP. Abomasum lesions were more prevalent in steers finished on GRAIN when compared to PAST. Results of this research showed that it is possible to produce carcasses with desirable market weight and fat thickness by finishing steers on legume–grass pasture containing oats, ryegrass, white and red clover. Moreover, supplementing steers with corn when grazing on legume–grass pasture produced similar carcass traits when compared to beef fed corn only.
PA6 and PMMA polymers with different MWCNTs addition (5, 7 and 9 wt %) were synthetized through casting solution, resulting in improvement properties in contrast to pristine polymers. SEM images showed the MWCNTs embedded into polymeric matrices. D, G and G´ bands of MWCNTs were confirmed by Raman spectroscopy and functional groups observed in both nanocomposites by FTIR demonstrated a strong interaction. A significant increasing in electrical conductivity and microhardness was observed in all the nanocomposites. Major microhardness values were obtained in MWCNTs/PA6 (50 HV) however the MWCNTs/PMMA nanocomposites showed the highest electrical conductivity value (6.4×10-4 S/cm).
People with psychotic disorders face impairments in their global functioning and their quality of life (QoL). The relationship between the two outcomes has not been systematically investigated. Through a systematic review, we aim to explore the presence and extent of associations between global functioning and QoL and establish whether associations depend on the instruments employed.
In May 2016, ten electronic databases were searched using a two-phase process to identify articles in which associations between global functioning and QoL were assessed. Basic descriptive data and correlation coefficients between global functioning and QoL instruments were extracted, with the strength of the correlation assessed according to the specifications of Cohen 1988. Results were reported with reference to the Meta-analysis of Observational Studies in Epidemiology guidelines and PRISMA standards. A narrative synthesis was performed due to heterogeneity in methodological approaches.
Of an initial 15 183 non-duplicate articles identified, 756 were deemed potentially relevant, with 40 studies encompassing 42 articles included. Fourteen instruments for measuring global functioning and 22 instruments for measuring QoL were used. Twenty-nine articles reported linear associations while 19 assessed QoL predictors. Correlations between overall scores varied in strength, primarily dependent on the QoL instrument employed, and whether QoL was objectively or subjectively assessed. Correlations observed for objective QoL measures were consistently larger than those observed for subjective measures, as were correlations for an interviewer than self-assessed QoL. When correlations were assessed by domains of QoL, the highest correlations were found for social domains of QoL, for which most correlations were moderate or higher. Global functioning consistently predicted overall QoL as did depressive and negative symptoms.
This review is the first to explore the extent of associations between global functioning and QoL in people with psychotic disorders. We consistently found a positive association between global functioning and QoL. The strength of the association was dependent on the QoL instrument employed. QoL domains strongly associated with global functioning were highlighted. The review illustrates the extensive array of instruments used for the assessment of QoL and to a lesser extent global functioning in people with psychotic disorders and provides a framework to understand the different findings reported in the literature. The findings can also inform the future choice of instruments by researchers and/or clinicians. The observed associations reassure that interventions for improving global functioning will have a positive impact on the QoL of people living with a psychotic disorder.
The aim of this research is to ameliorate the dispersion of pristine and functionalized Carbon Nanotubes (CNTs) into polystyrene with hydroxyl end groups (PSOH) matrices using low magnetic fields. The Multi-Walled Carbon Nanotubes (MWCNTs) were synthesized by chemical vapor deposition (CVD) using benzene as carbon source; to produce CNTs with and without functional groups two catalysts were used (stainless steel and ferrocene). The obtained nanotubes contained iron nanoparticles inside. PSOH were synthesized using styrene as monomer, azobisisobutyronitrile as initiator and 2-MeOH as chain transfer agent. The MWCNTs-PSOH matrices were formed using 1.6 wt % of carbon nanotubes into PSOH and ultrasonic mixing for 30 min. The mixing materials were poured into containers and dry at room temperature. While the material was drying, constant magnetic fields of 0.24 T were being applied for 50 min. The MWCNTs-PSOH composites were analysed by SEM, FTIR and Raman spectroscopy. SEM micrographs showed that MWCNTs without functional groups were incorporated in the middle of PSOH. The MWCNTs functionalized perform differently; a better dispersion through the entire polymer matrix was achieved, because the polymer embedded the CNTs. FTIR and Raman spectroscopy showed chemical interaction between PSOH and MWCNTs functionalized. The CNTs dispersion into PSOH was ameliorated through the use of low magnetic fields and functionalization.
In the Basque country and Galicia conditions, forage is usually conserved as silage, which accounts for a great part of cows winter rations. Robust techniques that predict the quality of forages for developing improved feeding strategies and screening of large number of forage samples are needed. In this sense, the gas production technique has proved to be of great interest when considering hays (Khazaal et al., 1995) and grass (Chenost et al., 2001), but information concerning grass silage in vivo data and gas production parameters is scarce. Therefore, the objective of this work is to try to assess in vivo grass silage apparent digestibility by means of gas production parameters.
Functionalization of silicone rubber films with lysozyme was achieved by grafting copolymerization and its chemical activation allowing the covalent immobilization of the enzyme. The new materials were characterized by means of Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, contact angle, atomic force microscopy, and mechanical properties of films. The enzymatic activity of films was studied by a suspension of lyophilized Micrococcus lysodeikticus. The activity test was inquired at different pH and temperatures, exhibiting enzymatic activity 20 °C above the free lysozyme, and at pH = 5 where the free lysozyme did not show activity.
The Learning Health System Network clinical data research network includes academic medical centers, health-care systems, public health departments, and health plans, and is designed to facilitate outcomes research, pragmatic trials, comparative effectiveness research, and evaluation of population health interventions.
The Learning Health System Network is 1 of 13 clinical data research networks assembled to create, in partnership with 20 patient-powered research networks, a National Patient-Centered Clinical Research Network.
Results and Conclusions
Herein, we describe the Learning Health System Network as an emerging resource for translational research, providing details on the governance and organizational structure of the network, the key milestones of the current funding period, and challenges and opportunities for collaborative science leveraging the network.
Childhood overweight and obesity are worldwide public health problems and risk factors for chronic diseases. The presence of SNP in several genes has been associated with the presence of obesity. A total of 580 children (8–13 years old) from Queretaro, Mexico, participated in this cross-sectional study, which evaluated the associations of rs9939609 (fat mass obesity-associated (FTO)), rs17782313 (melanocortin 4 receptor (MC4R)) and rs6548238 (transmembrane protein 18 (TMEM18)) SNP with obesity and metabolic risk factors. Overweight and obesity prevalence was 19·8 and 19·1 %, respectively. FTO, MC4R and TMEM18 risk allele frequency was 17, 9·8 and 89·5 %, respectively. A significant association between FTO homozygous and MC4R heterozygous risk alleles and obesity was found (OR 3·9; 95 % CI 1·46, 10·22, and OR 2·1; 95 % CI 1·22, 3·71; respectively). The FTO heterozygous subjects showed higher systolic and diastolic blood pressures, compared with the homozygous for the ancestral allele subjects. These results remain significant after considering adiposity as a covariate. The FTO and MC4R genotypes were not significantly associated with total cholesterol, HDL-cholesterol and insulin concentration. No association was found between TMEM18 risk allele and obesity and/or metabolic alterations. Our results show that, in addition to a higher BMI, there is also an association of the risk genotype with blood pressure in the presence of the FTO risk genotype. The possible presence of a risk genotype in obese children must be considered to offer a more comprehensive therapeutic approach in order to delay and/or prevent the development of chronic diseases.
Chitosan is biocompatible polymer has a great commercial interest because it can be processed in a sort of devices varying in shape and size, such as membranes, gels and nanoparticles. Mostly, the cell’s attachment and proliferation are very positive on nanostructurated materials with a three-dimensional formation. An irreversible network can be produced by covalently binding the polymer to the cross-linker molecules. Chitosan nanoparticles were prepared using glutaraldehyde as cross-linker. This crosss-liker mostly reacts with chitosan amino groups. In order to control and understand the physical characteristics of chitosan nanoparticle, in this work is showed the molecular behavior of chitosan/glutaraldehyde from the viewpoint of molecular interactions base in a series of molecular dynamics (MD) computer simulation. The results indicated the conformations of both molecules, which had a significant influence on the molecular association. The chitosan chains were uniformly distributed presenting a high flexibility and preference for the relaxed two-fold helix. This was due to the various associations such as intramolecular chitosan interactions –O-H···O-C-. While the chitosan-glutaraldehyde associations were due to the positive net charge density of hydrogens in the chitosan plus - H2N···C=O associations. In solid state chitosan nano and microparticles were analyzed by scanning electron microscopy (SEM). According to the micrographs results, the nanoparticles presented a monomorphism with piles of particles arranged in linear order which was consistent with the conformations determined by simulation.
Aluminum titanium oxynitride (TiAlNO) coatings were deposited on 316 steel substrates by the sputtering technique, varying the nitrogen flow from 2.5, 5, 7.5 to 10 sccm, and maintaining constant at 12 sccm the flow argon gas. We used targets of titanium and alumina with 99.995% purity. The hardness and tribological analyses were determined by Vickers microhardness and tribology (tribometer pin-disc), respectively. The results show that the coating with a nitrogen flow of 10 sccm had the lowest volumetric wear (2.047738693 mm3) and the maximum value of hardness (11.2 GPa). Analysis of X-ray diffraction evidenced the presence of three crystalline phases: Ti2N, Al2O3 and TiO2. It can be observed that by increasing the nitrogen flow, the portion of semi-Ti2N phase increases, Al2O3 decreases and TiO2 remains almost constant, and also producing a change in crystallographic orientation with reference to the Ti2N phase. Crystal grain sizes were estimated by X-ray diffraction Fourier line profile analysis using Warren–Averbach method. This analysis showed a grain size between 5 and 15 nm. Raman spectroscopy results show the presence of the TiO2 phase which corroborated the X-ray diffraction results.
Carbon nanotubes (CNTs) were synthesized by Chemical Vapor Deposition (CVD) from diethyl ether, butanol, hexane and ethyl acetate. A quartz tube with a stainless steel tube catalyst core with 0.019 m diameter and 0.6 m large formed the reactor. To avoid combustion, argon was used as the carrier gas. Time process ranged 30 to 60 min. The range of CNTs synthesis temperature was 680-850 °C for different precursors. Scanning Electron Microscopy micrographs have demonstrated tangled CNTs growth in all samples, thus presenting difficult length measurement. The CNTs diameters from diethyl ether are 45-200 nm, butanol diameter range from 55-230 nm, hexane diameter range is 50-130 nm and ethyl acetate range from 100 to 300 nm. Carbon content for all samples was higher than 93 %, CNTs from butanol showed carbon concentration up to 99%. FTIR, Raman and X-Ray Spectroscopies spectra for all samples demonstrated the characteristics signals present in carbon nanotubes. This research proposes a simple, effective and innovative method to synthesize CNTs by CVD on iron stainless steel catalyst in combination with diethyl ether, ethyl acetate, butanol and hexane as precursors by applying the principles of green chemistry, sustainability and its ease to be scaled.