In 2022, highly pathogenic avian influenza (HPAI) A(H5N1) virus clade 2.3.4.4b became enzootic and caused mass mortality in Sandwich Tern Thalasseus sandvicensis and other seabird species across north-western Europe. We present data on the characteristics of the spread of the virus between and within breeding colonies and the number of dead adult Sandwich Terns recorded at breeding sites throughout north-western Europe. Within two months of the first reported mortalities, 20,531 adult Sandwich Terns were found dead, which is >17% of the total north-western European breeding population. This is probably an under-representation of total mortality, as many carcasses are likely to have gone unnoticed and unreported. Within affected colonies, almost all chicks died. After the peak of the outbreak, in a colony established by late breeders, 25.7% of tested adults showed immunity to HPAI subtype H5. Removal of carcasses was associated with lower levels of mortality at affected colonies. More research on the sources and modes of transmission, incubation times, effective containment, and immunity is urgently needed to combat this major threat for colonial seabirds.

We present a demonstration version of a commensal pipeline for Fast Radio Burst (FRB) searches using a real-time incoherent beam from the Murchison Widefield Array (MWA). The main science target of the pipeline are bright nearby FRBs from the local Universe (including Galactic FRBs like from SGR 1935+2154) which are the best candidates to probe FRB progenitors and understand physical mechanisms powering these extremely energetic events. Recent FRB detections by LOFAR (down to 110 MHz), the Green Bank Telescope (at 350 MHz), and Canadian Hydrogen Intensity Mapping Experiment (CHIME) detections extending down to 400 MHz, prove that there is a population of FRBs that can be detected below 350 MHz. The new MWA beamformer, known as the ‘MWAX multibeam beamformer’, can form multiple incoherent and coherent beams (with different parameters) commensally to any ongoing MWA observations. One of the beams is currently used for FRB searches (tested in 10 kHz frequency resolution and time resolutions between 0.1 and 100 ms). A second beam (in 1 Hz and 1 s frequency and time resolutions, respectively) is used for the Search for Extraterrestrial Intelligence (SETI) project. This paper focuses on the FRB search pipeline and its verification on selected known bright pulsars. The pipeline uses the FREDDA implementation of the Fast Dispersion Measure Transform algorithm (FDMT) for single pulse searches. Initially, it was tested during standard MWA observations, and more recently using dedicated observations of a sample of 11 bright pulsars. The pulsar PSR J0835-4510 (Vela) has been routinely used as the primary probe of the data quality because its folded profile was always detected in the frequency band 200 – 230 MHz with typical signal-to-noise ratio $>$10, which agrees with the expectations. Similarly, the low dispersion measure pulsar PSR B0950+08 was always detected in folded profile in the frequency band 140–170 MHz and so far has been the only object for which single pulses were detected. We present the estimated sensitivity of the search in the currently limited observing bandwidth of a single MWA coarse channel (1.28 MHz) and for the upgraded, future system with 12.8 MHz (10 channels) of bandwidth. Based on expected sensitivity and existing FRB rate measurements, we project an FRB detection rate between a few and a few tens per year with large uncertainty due to unknown FRB rates at low frequencies.

We describe the design, validation, and commissioning of a new correlator termed ‘MWAX’ for the Murchison Widefield Array (MWA) low-frequency radio telescope. MWAX replaces an earlier generation MWA correlator, extending correlation capabilities and providing greater flexibility, scalability, and maintainability. MWAX is designed to exploit current and future Phase II/III upgrades to MWA infrastructure, most notably the simultaneous correlation of all 256 of the MWA’s antenna tiles (and potentially more in future). MWAX is a fully software-programmable correlator based around an ethernet multicast architecture. At its core is a cluster of 24 high-performance GPU-enabled commercial-off-the-shelf compute servers that together process in real-time up to 24 coarse channels of 1.28 MHz bandwidth each. The system is highly flexible and scalable in terms of the number of antenna tiles and number of coarse channels to be correlated, and it offers a wide range of frequency/time resolution combinations to users. We conclude with a roadmap of future enhancements and extensions that we anticipate will be progressively rolled out over time.

For the past 25 years, European badgers (Meles meles) have been subject to culling in Britain in attempts to limit the spread of tuberculosis (TB) to cattle. As part of a far-reaching evaluation of the effectiveness and acceptability of badger culling as a TB control measure, this paper assesses one aspect of the welfare of badger populations subjected to culling: the killing of breeding females, which risks leaving their unweaned cubs to starve in the den. To avoid this possibility, a three-month closed season was adopted, running from 1st February to 30th April, based on the best available estimates of the timing of birth and weaning in British badgers. During May 1999–2003, when a total of 4705 adult badgers were culled, field teams failed to capture 12 unweaned litters when their mothers were despatched. In 31 other cases, lactating females were culled but litters of almost-weaned cubs were also caught and despatched at the same dens, usually within a day of capture of the mother. The number of unweaned cubs missed by culling teams — estimated at approximately nine per year on average — was dramatically lower than that projected by a badger welfare lobby group. Our data suggest that the closed season is effective in reducing the suffering of unweaned cubs in badger populations subject to culling, and we recommend that this measure be maintained should badger culling form a component of any future TB control policy.

For over 25 years, European badgers (Meles meles) have been subject to culling in Britain in attempts to limit the spread of tuberculosis (TB) to cattle. As part of a far-reaching evaluation of the effectiveness and acceptability of badger culling as a TB control measure, this paper assesses one aspect of the welfare of badger populations subjected to culling: the risk of badgers confined to cage traps prior to despatch becoming injured as a result of rubbing or biting on the cage. In a large-scale field trial, 88% of badgers received no detectable injuries as a result of being confined in the trap. Of those that were injured, 72% received only minor skin abrasions. A minority (1.8% of the total) acquired damage to the teeth or jaws that may have caused serious pain. Although trap rounds were commenced in the early morning, badgers were no more likely to sustain injuries when they remained in traps until later in the day. Coating of cage traps, intended to give the wire mesh a smoother surface, was associated with a reduction in the incidence of minor skin abrasions, although it may have slightly increased the frequency of less common but more serious abrasions. Modification of the door design reduced tooth damage. Traps will be further modified if appropriate. However, all aspects of the conduct of trapping operations must balance badger welfare with concerns for the health and safety of field staff.

Laboratory tests were carried out in order to examine the population growth of Prostephanus truncatus (Horn) (Coleoptera: Bostrychidae) and Sitophilus oryzae (L.) (Coleoptera: Curculionidae) on maize. These two species were placed either simultaneously or one species was allowed to colonize the kernels 7 days earlier than the other, at two temperatures, 26 and 30 °C for 65 days. Apart from progeny production, grain quality parameters, such as insect-damaged kernels (IDK) and undamaged kernels (NDK), the weight of frass and kernel weight were measured. Our data confirms that temperature plays a key role in the competition of these two species; P. truncatus seems to perform better at the higher temperature (30 °C), regardless of the presence of an additional species. Moreover, the results of the present study demonstrates that P. truncatus outcompetes S. oryzae. Sitophilus oryzae produced fewer progeny than P. truncatus in all combinations. Given the outcome of a competition, we hypothesize that most of the kernel damage was due to feeding by P. truncatus. Based on these data, we surmise that P. truncatus has a competitive advantage as an invasive species in new areas with stored maize, even in the presence of S. oryzae.

The complexities of chemical composition and crystal structure are fundamental characteristics of minerals that have high relevance to the understanding of their stability, occurrence and evolution. This review summarises recent developments in the field of mineral complexity and outlines possible directions for its future elaboration. The database of structural and chemical complexity parameters of minerals is updated by H-correction of structures with unknown H positions and the inclusion of new data. The revised average complexity values (arithmetic means) for all minerals are 3.54(2) bits/atom and 345(10) bits/cell (based upon 4443 structure reports). The distributions of atomic information amounts, chemIG and strIG, versus the number of mineral species fit the normal modes, whereas the distributions of total complexities, chemIG,total and strIG,total, along with numbers of atoms per formula and per unit cell are log normal. The three most complex mineral species known today are ewingite, morrisonite and ilmajokite, all either discovered or structurally characterised within the last five years. The most important complexity-generating mechanisms in minerals are: (1) the presence of isolated large clusters; (2) the presence of large clusters linked together to form three-dimensional frameworks; (3) formation of complex three-dimensional modular frameworks; (4) formation of complex modular layers; (5) high hydration state in salts with complex heteropolyhedral units; and (6) formation of ordered superstructures of relatively simple structure types. The relations between symmetry and complexity are considered. The analysis of temporal dynamics of mineralogical discoveries since 1875 with the step of 25 years show the increasing chemical and structural complexities of human knowledge of the mineral kingdom in the history of mineralogy. In the Earth's history, both diversity and complexity of minerals experience dramatic increases associated with the formation of Earth's continental crust, initiation of plate tectonics and the Great Oxidation event.

The first demonstration of laser action in ruby was made in 1960 by T. H. Maiman of Hughes Research Laboratories, USA. Many laboratories worldwide began the search for lasers using different materials, operating at different wavelengths. In the UK, academia, industry and the central laboratories took up the challenge from the earliest days to develop these systems for a broad range of applications. This historical review looks at the contribution the UK has made to the advancement of the technology, the development of systems and components and their exploitation over the last 60 years.

ABSTRACT IMPACT: The mobilization of a CTSA-sponsored team with multi-disciplinary translational science expertise enabled the university to provide a range of T1-T4 expertise to a large, complex school district that resulted in permanent learning and data science infrastructure. OBJECTIVES/GOALS: The Clinical Translational Science Institute (CTSI) formed a multidisciplinary science team to provide expertise in support of the re-opening of in-person learning in the second-largest U.S. school district during the COVID-19 pandemic. METHODS/STUDY POPULATION: The assembled interdisciplinary science team provided expertise in epidemiology, machine learning, causal inference and agent-based modeling, data and improvement science, biostatistics, clinical and laboratory medicine, health education, community engagement, and experience in outbreak investigation and management. The team included TL1 pre and postdoctoral fellows and mobilized scientists from multiple professional schools and T1-T4 stages of translational research. RESULTS/ANTICIPATED RESULTS: Tangible outcomes achieved using this team approach included the development of practical metrics for use in the school community, a learning process, the integration of preventive design elements into a testing and tracing program, and targeted and data-driven health education. The team, for example, generated new data displays for community engagement and collaborated with the school district in their use to visualize, learn from, and act on variation across a 700 square mile region. DISCUSSION/SIGNIFICANCE OF FINDINGS: Novel translational methods can be used to establish a learning environment and data science infrastructure that complements efforts of public health agencies to aid schools in the COVID-19 pandemic. These new capabilities apply to COVID-19 testing and vaccines and can be mobilized for future population health challenges faced by school districts.

ABSTRACT IMPACT: This study provides public health and K-12 school districts with a pragmatic, flexible, adaptable model showing COVID-19 transmission dynamics, using local data and program elements that are modifiable and with an online model for easy use, to enable safe and equitable re-opening and maintenance of in-person learning. OBJECTIVES/GOALS: School closures resulting from the COVID-19 pandemic disrupt student education and health and exacerbate inequities. Public health agencies and school districts currently lack pragmatic models to assess the effects of potential strategies for resuming and maintaining in-person learning on outcomes such as transmission and attendance. METHODS/STUDY POPULATION: This study explored how various combinations of transmission-mitigating interventions affect health and learning outcomes in a range of underlying epidemiological conditions. The CTSA science team developed a conceptual framework and an agent-based simulation model with parameters including prevalence, transmission, testing, preventive and responsive actions, infection control, population behavior and awareness, and the potential impact of vaccine adoption and exemption policies. The team partnered with a large school district to ensure relevance of the program components to decision-making. RESULTS/ANTICIPATED RESULTS: The model shows that no single program element or condition ensures safety. Combining interventions can result in synergy in the mitigation efforts. Even without testing, an efficient health screening process with forthcoming risk reporting, combined with on-campus infection control, can reduce on-campus transmission. The resulting model is accessible online to enable exploration of likely scenarios. It is adaptable as COVID-19 science evolves, including for testing and vaccines. DISCUSSION/SIGNIFICANCE OF FINDINGS: This research provides public health agencies and school districts with a model that couples local conditions with programmatic elements to help inform the local COVID-19 response, recognizing that decisions about the school community are often complex politically, technically, and operationally when it comes to addressing a health crisis.

High-intensity laser–plasma interactions produce a wide array of energetic particles and beams with promising applications. Unfortunately, the high repetition rate and high average power requirements for many applications are not satisfied by the lasers, optics, targets, and diagnostics currently employed. Here, we aim to address the need for high-repetition-rate targets and optics through the use of liquids. A novel nozzle assembly is used to generate high-velocity, laminar-flowing liquid microjets which are compatible with a low-vacuum environment, generate little to no debris, and exhibit precise positional and dimensional tolerances. Jets, droplets, submicron-thick sheets, and other exotic configurations are characterized with pump–probe shadowgraphy to evaluate their use as targets. To demonstrate a high-repetition-rate, consumable, liquid optical element, we present a plasma mirror created by a submicron-thick liquid sheet. This plasma mirror provides etalon-like anti-reflection properties in the low field of 0.1% and high reflectivity as a plasma, 69%, at a repetition rate of 1 kHz. Practical considerations of fluid compatibility, in-vacuum operation, and estimates of maximum repetition rate are addressed. The targets and optics presented here demonstrate a potential technique for enabling the operation of laser–plasma interactions at high repetition rates.