The continental shelf strata provide information regarding sea-level fluctuation and climate changes in the Quaternary period. A 5831.47-km-long high-resolution seismic profile and borehole core (YS01) were acquired to reconstruct the evolutionary history of the strata in South Yellow Sea (SYS) during the late Pleistocene. The strata recorded three transgression events (HI, HII, and HIII) and three stages of paleochannel development (LI, LII, and LIII). Based on the distribution, thickness, and volume of the strata formed in the three transgressions, we concluded that the scale of the three transgressions during the late Pleistocene was HIII, HI, and HII, in descending order. In addition, our data show that the Yellow River extended to the Yellow Sea Trough during the last glacial maximum. The influence of the tectonic framework on sedimentation in the SYS was completely concealed by sea-level changes and sediment supply in the late Pleistocene (~Marine Isotope Stage 5). Since then, the accommodation space, a crucial prerequisite for sedimentation, has been controlled solely by sea-level changes in the SYS. Furthermore, two “source to sink” models of the neritic shelf in the marine and terrestrial environments were established, including high sea-level and shelf-exposure models.

This paper presents a neural network-based four-direction search scheme of path planning for mobile agents, given a known environmental map with stationary obstacles. Firstly, the map collision energy is modeled for all the obstacles based on neural network. Secondly, for the shorted path-search purpose, the path energy is considered. Thirdly, to decrease the path-search time, a variable step-length is designed with respect to collision energy of the previous iteration path. Simulation results demonstrate that the variable step-length is effective and can decrease the iteration time substantially. Lastly, experimental results show that the mobile agent tracks the generated path well. Both the simulation and experiment results substantiate the feasibility and realizability of the presented scheme.

In order to reveal the quantitative relationship between fatigue crack deflection path and cross-sectional grain boundary (GB) arrangement of metallic nanolayered composites (NLCs), a stochastic model was established based on the interface-dominant fatigue damage for the ultrafine-scale NLCs. The model indicates that the crack deflection length decreases with decreasing GB arrangement deviation and grain size of constituent layers. The observation and quantitative analysis of fatigue cracking behavior of the Cu/W multilayers with a layer thickness of 5 and 20 nm was conducted to verify the model.

Annexin A2 (ANXA2) is reported to be associated with cancer development. To investigate the roles ANXA2 plays during the development of cancer, the RNAi method was used to inhibit the ANXA2 expression in caco2 (human colorectal cancer cell line) and SMMC7721 (human hepatocarcinoma cell line) cells. The results showed that when the expression of ANXA2 was efficiently inhibited, the growth and motility of both cell lines were significantly decreased, and the development of the motility relevant microstructures, such as pseudopodia, filopodia, and the polymerization of microfilaments and microtubules were obviously inhibited. The cancer cell apoptosis was enhanced without obvious significance. The possible regulating pathway in the process was also predicted and discussed. Our results suggested that ANXA2 plays important roles in maintaining the malignancy of colorectal and hepatic cancer by enhancing the cell proliferation, motility, and development of the motility associated microstructures of cancer cells based on a possible complicated signal pathway.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

The influence of the nozzle aspect ratio ( $AR=1$ , 2 and 4), stroke length ( $L_{0}=1.85$ , 3.7 and 5.55) and Reynolds number ( $Re=79$ , 158, 316 and 632) on the behaviour of elliptic synthetic jets is studied experimentally. Laser-induced fluorescence and two-dimensional and stereoscopic particle image velocimetry are used to analyse the vortex dynamics and evolution mechanism. It is found that the fluid elements around the major axis of an elliptic vortex ring move downstream faster and tend to approach the centreline, while the fluid elements around the minor axis move downstream at a slower speed and away from the centreline, thereby resulting in the occurrence of the well-known axis-switching phenomenon for elliptic synthetic jets. During this process, a pair of arc-like vortices forms ahead of the primary vortex ring, and they are constituted by streamwise vortices in the leg part and spanwise vortices in the head part; two pairs of streamwise vortices form from the inside of the primary vortex ring and develop in the tails. The streamwise vortices are pushed away progressively from the centreline by the synthetic jet vortex rings that are formed during the subsequent periods. These additional vortical structures for non-circular synthetic jets show regular and periodic characteristics, which are quite different from the previous findings for non-circular jets. Their mutual interaction with the vortex ring causes significant changes in the topology of elliptic synthetic jets, which further results in the variation of the statistical characteristics. Increasing the aspect ratio, stroke length and Reynolds number will make the evolution of the synthetic jet become more unstable and complex. In addition, the entrainment rate of an elliptical synthetic jet is larger than that of a circular synthetic jet and it increases with the nozzle aspect ratio ( $AR\leqslant 4$ ) and Reynolds number. It is indicated that the formation of streamwise vortices could enhance the entrainment rate. This finding provides substantial evidence for the potential application of elliptic synthetic jets for effective flow control.

In this paper, the influence of strain rate on the mechanical behavior of high-strength low-alloy (HC420LA) steel were studied. Quasi-static and dynamic tensile experiments were performed with strain rates ranging from 0.001 to 500 s−1 at room temperature. The digital image correlation technique was used to obtain the full-field strain. The experimental results showed that HC420LA steel exhibited positive strain rate sensitivity. Based on experimental results, the modified Johnson–Cook (J–C) model was used to model the constitutive behavior of HC420LA steel. Predictions of the standard and modified J–C models were compared using standard statistical parameters. The modified J–C model showed better agreement with the experimental data. Then, numerical simulation of the representative tensile test at a strain rate of 100 s−1 was performed using the finite element code LS-DYNA. Good correlation between the experimental and numerical simulation results was achieved.

The aim of this study was to investigate the in vivo degradation mechanism and the mechanical properties of poly(lactide-co-glycolide)/beta-tricalcium phosphate (PLGA/β-TCP) composite anchors. Anchors composed of PLGA and β-TCP were implanted in the dorsal subcutaneous tissue of beagle dogs for 6, 12, 16, and 26 weeks. The degradation of the materials was evaluated by measuring the changes in thermal behavior, crystallinity, and mechanical properties. Scanning electron microscope (SEM) was used to observe the surface and longitudinal section of the material. The evaluation of mechanical strength retention and degradation properties suggest that the addition of β-TCP particles efficiently enhances their mechanical properties and thermal characteristics and delays their degradation rate. By analyzing the results of SEM, X-ray diffraction, and differential scanning calorimetry, we can infer that after 12 weeks, the connection between β-TCP and PLGA becomes less compact, which accelerates the decline of mechanical strength.

Pine wilt disease, which is caused by the pine wood nematode (PWN), Bursaphelenchus xylophilus, has caused huge damage to pine forests around the world. In this study, we analysed the PWN transcriptome to investigate the expression of genes related to the associated bacterial species Pseudomonas fluorescens and found that the gene adh-1 encoding alcohol dehydrogenase (ADH) was upregulated. The open reading frame of adh-1, which encoded a protein of 352 amino acid residues, was cloned from B. xylophilus. Recombinant ADH with a relative molecular weight of 39 kDa, was present mainly in inclusion bodies and was overexpressed in Escherichia coli BL21 (DE3) and purified after refolding. The biochemical assay revealed that recombinant ADH could catalyse the dehydrogen reaction of eight tested alcohols including ethanol in the presence of NAD+. Quantitative real-time RT-PCR analysis indicated that ethanol upregulated adh-1 expression in PWN. Results of RNA interference and inhibition of ADH treatment indicated that downregulating expression of adh-1 or inhibition of ADH could reduce ethanol tolerance and the vitality and reproduction ability of B. xylophilus, suggesting that adh-1 is involved in pathogenicity of PWN.

Graphitic carbon nitride (g-C3N4) microspheres (CNMS) were fabricated via a solvothermal method by using dicyandiamide and cyanuric chloride as precursors. The morphology, band structure, and defects can be simultaneously regulated by merely adjusting the concentration of precursors. Structural characterization results indicate that all the prepared samples possess spherical morphology, while the band gap decreased as the precursor concentration increased from 8 mmol (CNMS-1) to 24 mmol (CNMS-3). Besides, ultraviolet photoelectron spectroscopy results suggested that the valence band of CNMS-2 (16 mmol) was much higher than that of CNMS-1 and CNMS-3. Additionally, organic elemental analysis, X-ray photoelectron spectroscopy, and electron paramagnetic resonance results unveil the formation of nitrogen defects on the surface of prepared samples. Besides, CNMS-2 exhibits an enhanced apparent reaction rate constant of RhB degradation than that of CNMS-1 and CNMS-3. The improved apparent reaction rate constant may be due to the lowered valence band as well as the formation of nitrogen defects. This work might guide the regulation of the morphology and band structure of g-C3N4-based materials prepared via the one-pot hydrothermal method.

Combining density functional theory calculations and temperature programmed desorption (TPD) experiments, the adsorption behavior of various sulfur containing compounds, including C2H5SH, CH3SCH3, tetrahydrothiophene, thiophene, benzothiophene, dibenzothiophene, and their derivatives on the coordinately unsaturated sites of Mo27Sx model nanoparticles, are studied systematically. Sulfur molecules with aromaticity prefer flat adsorption than perpendicular adsorption. The adsorption of nonaromatic molecules is stronger than the perpendicular adsorption of aromatic molecules, but weaker than the flat adsorption of them. With gradual hydrogenation (HYD), the binding affinity in the perpendicular adsorption modes increases, while in flat adsorption modes it increases first, then decreases. Significant steric effects on the adsorption of dimethyldibenzothiophene were revealed in perpendicular adsorption modes. The steric effect, besides weakening adsorption, could also activate the S–C bonds through a compensation effect. Finally, by comparing the theoretical adsorption energies with the TPD results, we suggest that HYD and direct-desulfurization path may happen simultaneously, but on different active sites.

Coherent cuboidal B2 nanoprecipitation in body-centered cubic (BCC)-based high-entropy alloys (HEAs) is important for the improvement of mechanical strength. The present work primarily investigated the effect of Ti substitution for Al on the cuboidal B2 nanoprecipitates in BCC Al0.7NiCoFeCr2 HEAs. A series of (Al,Ti)0.7NiCoFeCr2 HEAs with different Al/Ti ratios were prepared by suction-cast processing, and their microstructures and mechanical properties were then characterized comprehensively. It was found that the substitution of Ti for Al can change the phase structures of ordered precipitation, from the B2-AlNi to a highly ordered L21-Ni2AlTi phase. Especially, a small amount addition of Ti (≤4.2 at.%, Al/Ti ratio ≥2/1) renders the HEAs with cuboidal L21 nanoparticles coherently precipitated into the BCC matrix, which is attributed to the moderate lattice misfit (ε = 0.5–0.6%) between BCC and L21 phases. HEAs with such coherent microstructures exhibit high compressive yield strength of about 1700–1800 MPa. When the Ti content reaches up to 6.25 at.%, the matrix of the alloy will be turned into the σ phase, rather than BCC, leading to a heavy brittleness.

Dairy cows with type II ketosis display hepatic fat accumulation and hyperinsulinemia, but the underlying mechanism is not completely clear. This study aimed to clarify the regulation of lipid metabolism by insulin in cow hepatocytes. In vitro, cow hepatocytes were treated with 0, 1, 10, or 100 nm insulin in the presence or absence of AICAR (an AMP-activated protein kinase alpha (AMPKα) activator). The results showed that insulin decreased AMPKα phosphorylation. This inactivation of AMPKα increased the gene and protein expression levels of carbohydrate responsive element-binding protein (ChREBP) and sterol regulatory element-binding protein-1c (SREBP-1c), which downregulated the expression of lipogenic genes, thereby decreasing lipid biosynthesis. Furthermore, AMPKα inactivation decreased the gene and protein expression levels of peroxisome proliferator-activated receptor-α (PPARα), which upregulated the expression of lipid oxidation genes, thereby increasing lipid oxidation. In addition, insulin decreased the very low density lipoprotein (VLDL) assembly. Consequently, triglyceride content was significantly increased in insulin treated hepatocytes. Activation of AMPKα induced by AICAR could reverse the effect of insulin on PPARα, SREBP-1c, and ChREBP, thereby decreasing triglyceride content. These results indicate that insulin inhibits the AMPKα signaling pathway to increase lipid synthesis and decrease lipid oxidation and VLDL assembly in cow hepatocytes, thereby inducing TG accumulation. This mechanism could partly explain the causal relationship between hepatic fat accumulation and hyperinsulinemia in dairy cows with type II ketosis.

In high power laser facility for inertial confinement fusion research, final optics assembly (FOA) plays a critical role in the frequency conversion, beam focusing, color separation, beam sampling and debris shielding. The design and performance of FOA in SG-II Upgrade laser facility are mainly introduced here. Due to the limited space and short focal length, a coaxial aspheric wedged focus lens is designed and applied in the FOA configuration. Then the ghost image analysis, the focus characteristic analysis, the B integral control design and the optomechanical design are carried out in the FOA design phase. In order to ensure the FOA performance, two key technologies are developed including measurement and adjustment technique of the wedged focus lens and the stray light management technique based on ground glass. Experimental results show that the design specifications including laser fluence, frequency conversion efficiency and perforation efficiency of the focus spot have been achieved, which meet the requirements of physical experiments well.

The prevalence of overweight and obesity is growing rapidly in many countries. Socioeconomic inequalities might be important for this increase. The aim of this study was to determine associations of body mass index (BMI), overweight and obesity with educational level and marital status in Chinese twins. Participants were adult twins recruited through the Chinese National Twin Registry (CNTR), aged 18 to 79 years, and the sample comprised 10,448 same-sex twin pairs. Current height, weight, educational attainment, and marital status were self-reported. Regression analyses and structural equation models were conducted to evaluate BMI, overweight, and obesity associated with educational level and marital status in both sexes. At an individual level, both educational level and marital status were associated with higher BMI and higher risk of being overweight and obesity in men, while in women the effects of educational level on BMI were in the opposite direction. In within-Monozygotic (MZ) twin-pair analyses, the effects of educational level on BMI disappeared in females. Bivariate structural equation models showed that genetic factors and shared environmental confounded the relationship between education and BMI in females, whereas marital status was associated with BMI on account of significant positive unique environmental correlation apart in both sexes. The present data suggested that marital status and BMI were associated, independent of familiar factors, for both sexes of this study population, while common genetic and shared environmental factors contributed to education-associated disparities in BMI in females.

Paphiopedilum hirsutissimum (Lindl. ex Hook. f.) Stein (Orchidaceae) is a valuable but endangered ornamental plant. In the present study, the microsatellites characteristics were analysed and 14 polymorphic simple sequence repeat (SSR) markers were developed based on the de novo transcriptome sequencing for P. hirsutissimum using Illumina pair-end sequencing technology. A total of 7406 SSRs were detected in 56,688 unigenes, with the occurrence frequency of 13.06% and an average density of one SSR per 5.42 kb; and 150 primer pairs randomly selected from 2090 pairs except mononucleotide repeats were synthesized for verification. These loci were validated in 32 individuals from the concentrated distribution centre, and were successfully amplified using 14 primer sets showing a high level of polymorphism. These SSR markers will be useful in future studies of genetic diversity, the population structure of P. hirsutissimum and make effective conservation strategy.

The lichen family Ophioparmaceae contains three genera: Boreoplaca, Hypocenomyce and Ophioparma. The genus Hypocenomyce is reported here for the first time for China, being represented by the species Hypocenomyce scalaris which is distributed in south-western China. For the genus Ophioparma, one new species is described in this paper, namely Ophioparma pruinosa Li S. Wang & Y. Y. Zhang sp. nov., which is characterized by a pruinose thallus and the presence of usnic acid. Ophioparma araucariae is also reported as new for the Chinese lichen biota. Previous reports of O. lapponica in China are recognized as misidentifications of O. ventosa. Descriptions, keys and phylograms are provided for these species.