To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure firstname.lastname@example.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
We numerically study the impact of a compound drop on a hydrophobic substrate using a ternary-fluid diffuse-interface method, aiming to understand how the presence of the inner droplet affects the spreading dynamics and maximal spreading of the compound drop. First, it is interesting to see that the numerical results for an impacting pure drop agree well with the universal rescaling of maximal spreading ratio proposed by Lee et al. (J. Fluid Mech., vol. 786, 2016, R4). Second, two flow regimes have been identified for an impacting compound drop: namely jammed spreading and joint rim formation. The maximal spreading ratio of the compound drop is found to depend on the volume fraction of the inner droplet
, the surface tension ratio
, the Weber number and the flow regime. Moreover, we propose a universal rescaling of maximal spreading ratio for compound drops, by integrating the one for pure drops with a corrected Weber number that takes
and the flow regime into account. The predictions of the universal rescaling are in good agreement with the numerical results for impacting compound drops.
Litter size has a great impact on the profit of swine producers. Uterine development is an important determinant of reproduction efficiency and could hence affect litter size. Chinese Erhualian pig is one of the most prolific breeds in the world, even though large phenotypic variation in litter size was observed within Erhualian sows. To dissect the genetic basis of the phenotypic variation, we herein conducted genome-wide association studies for total number born and number born alive (NBA) of Erhualian sows. In total, one significant single nucleotide polymorphism (SNP) (P<1.78e−06) and 11 suggestive SNPs (P<3.57e−05) were identified on 10 chromosomes, confirming seven previously reported quantitative trait loci (QTL) and uncovering six QTL for litter size or uterus length. One locus on Sus scrofa chromosome (SSC) 13 (79.28 to 90.43 Mb) harbored a cluster of suggestive SNPs associated with multiparous NBA. The SNP (rs81447100) within this region was confirmed to be significantly (P<0.05) associated with litter size in Erhualian (n=313), Sutai (n=173) and Yorkshire (n=488) populations. Retinol binding protein 2 and retinol binding protein 1 functionally related to the development of uterus were located in a region of 2 Mb around rs81447100. Moreover, four genes related to embryo implantation and development were also detected around other significant SNPs. Taken together, our findings provide a potential marker (rs81447100) for the genetic improvement of litter size not only in Chinese Erhualian pigs but also in European commercial pig breeds like Yorkshire, and would facilitate the final identification of causative variant(s) underlying the effect of SSC13 QTL on litter size.
Multiple human immunodeficiency virus (HIV)-1 genotypes in China were first discovered in Yunnan Province before disseminating throughout the country. As the HIV-1 epidemic continues to expand in Yunnan, genetic characteristics and transmitted drug resistance (TDR) should be further investigated among the recently infected population. Among 2828 HIV-positive samples newly reported in the first quarter of 2014, 347 were identified as recent infections with BED-captured enzyme immunoassay (CEIA). Of them, 291 were successfully genotyped and identified as circulating recombinant form (CRF)08_BC (47.4%), unique recombinant forms (URFs) (18.2%), CRF01_AE (15.8%), CRF07_BC (14.4%), subtype C (2.7%), CRF55_01B (0.7%), subtype B (0.3%) and CRF64_BC (0.3%). CRF08_BC and CRF01_AE were the predominant genotypes among heterosexual and homosexual infections, respectively. CRF08_BC, URFs, CRF01_AE and CRF07_BC expanded with higher prevalence in central and eastern Yunnan. The recent common ancestor of CRF01_AE, CRF07_BC and CRF08_BC dated back to 1983.1, 1992.1 and 1989.5, respectively. The effective population sizes (EPS) for CRF01_AE and CRF07_BC increased exponentially during 1991–1999 and 1994–1999, respectively. The EPS for CRF08_BC underwent two exponential growth phases in 1994–1998 and 2001–2002. Lastly, TDR-associated mutations were identified in 1.8% of individuals. These findings not only enhance our understanding of HIV-1 evolution in Yunnan but also have implications for vaccine design and patient management strategies.
Lymphatic filariasis is a neglected tropical disease caused by roundworm parasites such as Brugia malayi that spread via a mosquito vector. In vitro culture of these parasites provides controlled conditions to understand parasite biology and provides a cheaper way to screen potential micro- and macrofilaricides. Published studies have used a wide array of approaches and metrics regarding in vitro cultures of B. malayi; as a result, drawing comparisons and identifying the reasons why inability to reproduce outcomes are difficult. This study sought to determine conditions that ensure reproducible outcomes and used evaluation metrics that are easily measured and can be automated to ensure objectivity. We found culturing B. malayi third-stage larvae (L3) in endothelial basal media supplemented with 20% fetal bovine serum and 75 µm ascorbic acid in a temperature- and humidity-controlled incubator produced better survival and molting rates as well as longer and more motile parasites than previously reported. The benefit of ascorbic acid seemed to be unique to L3 parasites, as the addition of ascorbic acid to adult parasites had no significant impact on survival or motility. The methods reported in this study will help in designing experiments for both parasite behaviour studies and drug screening applications for disease eradication.
In this paper, the occurrence of the stimulated Raman scattering (SRS) and its effects on stimulated Brillouin scattering (SBS) pulse compression in FC-40 are investigated. As the experimental medium, the characteristics of FC-40 are suitable for pulse compression. Firstly, the frequency shifts and the threshold of SRS in FC-40 are studied with a mode-locked laser system as pump source, without taking the SBS effect into account. On the basis of the experimental results, the competition between SRS and SBS as well as its effect on pulse compression is investigated. Results show that SRS gets higher gain and grows rapidly with the increase of the laser intensity by pump effect, which will result in decreasing of SBS energy reflection.
The compact radio and near-infrared (NIR) source Sagittarius A* has been observed in the context of two NIR triggered global VLT and VLBA campaigns at 43 GHz (7 mm) on May 16-18 2012 and October 4 2014. While on October 4 2014 Sgr A* remained in a quiescent state, a NIR flare on May 17 2012 is accompanied by an increase in flux density of 0.22 Jy at 7 mm delayed by 4.5±0.5 h. Additionally, Sgr A* seems to develop a weak secondary radio off-core component of 0.02 Jy at a position angle of 140° and an angular distance of 1.5 mas shortly before the peak of the flare. This spatial extension and the time delay are in the range of expected values for events casually connected by adiabatic expansion.
Nano-sized SiOx/C composite was successfully prepared by drip combustion in a fluidized bed reactor. A mixture of tetraethyl orthosilicate (TEOS) ant kerosene at a 2:3 volume ratio was used as a precursor solution. The synthesis was carried out between 600 °C and 900 °C. The as-prepared powder (600 °C) consists of SiOx and carbon particles which are approximately ranged from 30 to 80 nm. For the nano-sized SiOx/C composite sample, the heat treatment process was introduced to remove incomplete combustion materials and the dry ball milling was performed to homogenize the distribution of carbon inside the sample. The final sample (nano-sized SiOx/C nanocomposite) was used as an electrode active material and then electrochemical testing was performed. The cell exhibited discharge and charge capacities of 1158 and 533 mAh g-1, respectively, at current density of 50 mAh g-1 in the voltage range between 0.01-3 V versus Li/Li+.
We investigate the cavity formation during the impact of spheres and cylinders into a liquid pool by using a combination of experiments, simulations and theoretical analysis, with particular interest in contact-line pinning and its relation with the subsequent cavity evolution. The flows are simulated by a Navier–Stokes diffuse-interface solver that allows for moving contact lines. On the basis of agreement on experimentally measured quantities such as the position of the pinned contact line and the interface shape, we investigate flow details that are not accessible experimentally, identify the interface regions in the cavity formation and examine the geometric effects of impact objects. We connect wettability, inertia, geometry of the impact object, interface bending and contact-line position with the contact-line pinning by analysing the force balance at a pinned meniscus, and the result compares favourably with those from simulations and experiments. In addition to adjusting the interface bending, the object geometry also has a significant effect on the magnitude of low pressure in the liquid and the occurrence of flow separation. As a result, it is easier for an object with sharp edges to generate a cavity than a smooth object. A theoretical model based on the Rayleigh–Besant equation is developed to provide a quantitative description of the radial expansion of the cavity after the pinning of the contact line. The accuracy of the solution is greatly affected by the geometrical information on the interface connected to the pinned meniscus, showing the dependence of the global cavity dynamics on the local flows around the pinned contact line. Vertical ripple propagation on the cavity wall is found to follow the dispersion relation for the perturbation evolution on a hollow jet.
Synthesis and understanding of metal oxide nanomaterials with improved electrochemical properties can play a big role in the development of high capacity electrochemical cells for application in lithium-ion batteries (LIBs). Metal oxide nanostructured materials have shown exceptional storage capabilities through conversion reaction. But, excess reversible capacity is usually observed in these systems. To understand the origin of the excess capacity, we have prepared nanostructured ruthenium oxide (RuO2) directly on stainless steel current collectors using low pressure chemical vapor deposition. The crystal structure of the as-prepared materials were examined by powder X-ray diffraction and indexed to the rutile structure. Field emission scanning electron microscopy revealed 3D pyramidal shape architectures that self-assembled into columns creating high surface area. Galvanostatic charge-discharge measurements were performed versus Li/Li+ in the range of 4.0 to 0.1 V. We have observed a reversible capacity of 1150 mAh/g which is equivalent to 5.70 Li per mol of RuO2. The expected capacity of RuO2 is 806 mAh/g which is approximately 4 Li per mol of RuO2 based on this equation: RuO2 + Li + 4e- ↔ Ru0 + 2Li2O. The excess capacity is approximately 435 mAh/g. The origin of the excess capacity was investigated using cyclic voltammetry, which was performed at two different range of voltage.
Spray pyrolysis has been widely used to prepare homogeneous and uniform ceramic powders with high purity. In this study, we are proposing ultrasonic spray pyrolysis followed by heat treatment to produce SiOx/C composite powders, where sucrose was used as a carbon source. Furthermore, high energy ball milling of the as-prepared powders in the presence of acetylene black was conducted to activate its electrochemical properties by reducing the particle size and improving the functionalization of the SiOx composite particles. SiOx/C nanocomposite finally obtained at a sucrous concentration of 0.1 mol L-1 showed superior electrochemical properties, and the SiOx/C nanocomposite electrode delivered the first discharge and charge capacities of 1252 and 819 mAh g-1, respectively, with an initial columbic efficiency of 65% at a current density of 50 mAh g-1 in the potential range from 0.01 to 3 V versus Li/Li+.
The Herschel Space Observatory was the fourth cornerstone mission in the European Space Agency (ESA) science programme with excellent broad band imaging capabilities in the sub-mm and far-infrared part of the spectrum. Although the spacecraft finished its observations in 2013, it left a large legacy dataset that is far from having been fully scrutinised and still has a large potential for new scientific discoveries. This is specifically true for the photometric observations of the PACS and SPIRE instruments. Some source catalogues have already been produced by individual observing programs, but there are many observations that risk to remain unexplored. To maximise the science return of the SPIRE and PACS data sets, we are in the process of building the Herschel Point Source Catalogue (HPSC) from all primary and parallel mode observations. Our homogeneous source extraction enables a systematic and unbiased comparison of sensitivity across the different Herschel fields that single programs will generally not be able to provide. The catalogue will be made available online through archives like the Herschel Science Archive (HSA), the Infrared Science Archive (IRSA), and the Strasbourg Astronomical Data Center (CDS).
Necrophoric behaviour is critical sanitation behaviour in social insects. However, little is known about the necrophoric responses of workers towards different developmental stages in a colony as well as its underlying mechanism. Here, we show that Solenopsis invicta workers display distinct necrophoric responses to corpses of workers and pupae. Corpses of workers killed by freezing (dead for <1 h) were carried to a refuse pile, but pupal corpses would take at least 1 day to elicit workers’ necrophoric response. Metarhizium anisopliae-infected pupal corpses accelerated the necrophoric behaviour of resident workers, with 47.5% of unaffected corpses and 73.8% infected corpses discarded by 1 day post-treatment). We found that fungus-infected pupal corpses had a higher concentration of fatty acids (palmitic acid, oleic acid and linoleic acid) on their surface. We experimentally confirmed that linoleic and oleic acids would elicit a necrophoric response in workers. The appearance of linoleic and oleic acids appeared to be chemical signals involved in recognition of pupal corpses, and M. anisopliae infection could promote the accumulation of fatty acids on surface of pupal corpses resulting in accelerated necrophoric responses of workers.
We have been interested in the plasmonic properties of alternative conducting materials to metals, such as conducting oxides, and we have recently expanded our studies to include highly correlated oxides, such as vanadium dioxide (VO2) thin films. VO2 exhibits a metal-insulator transition (MIT) just above ambient temperature at ∼ 340K. Interestingly, this transition can be induced thermally, optically or applying electric fields. Across the MIT, the optical properties are completely modified over a broad frequency range. We will present our recent optical investigations on the photon induced transition studies on such films, as well as the surface plasmon resonance (SPR) modulation in nanopatterned Au gratings by the thermally induced MIT in VO2 thin films, addressing possibilities of ultrafast SPR modulation with VO2.
The transmission of haemorrhagic fever with renal syndrome (HFRS) is deeply influenced by the reservoir and hantavirus prevalence rate. In this study, a surveillance on human HFRS cases, relative rodent abundance, and hantavirus infection prevalence was conducted in Shaanxi province, China, during 1984–2012. A generalized linear model with Poisson-distributed residuals and a log link was used to quantify the relationship between reservoir, virus and HFRS cases. The result indicated that there was a significant association of HFRS incidence with relative rodent density and the prevalence rate. This research provides evidence that the changes of infection prevalence in the reservoir could lead directly to the emergence of a new epidemic. It was concluded that the measurement of a number of these variables could be used in disease surveillance to give useful advance warning of potential disease epidemics.