We recently reported on the radio-frequency attenuation length of cold polar ice at Summit Station, Greenland, based on bi-static radar measurements of radio-frequency bedrock echo strengths taken during the summer of 2021. Those data also allow studies of (a) the relative contributions of coherent (such as discrete internal conducting layers with sub-centimeter transverse scale) vs incoherent (e.g. bulk volumetric) scattering, (b) the magnitude of internal layer reflection coefficients, (c) limits on signal propagation velocity asymmetries (‘birefringence’) and (d) limits on signal dispersion in-ice over a bandwidth of ~100 MHz. We find that (1) attenuation lengths approach 1 km in our band, (2) after averaging 10 000 echo triggers, reflected signals observable over the thermal floor (to depths of ~1500 m) are consistent with being entirely coherent, (3) internal layer reflectivities are ≈–60$\to$–70 dB, (4) birefringent effects for vertically propagating signals are smaller by an order of magnitude relative to South Pole and (5) within our experimental limits, glacial ice is non-dispersive over the frequency band relevant for neutrino detection experiments.

In this study, for the first time, we consider longitudinal motion of the walls during peristalsis in a distensible tube and how this affects backward (or retrograde) flow, i.e. peristaltic reflux. Building on the analytical model developed by Shapiro et al. (J. Fluid Mech., vol. 37, no. 4, 1969, pp. 799–825) based on lubrication theory, we model peristalsis as a two-dimensional infinite sinusoidal wavetrain. We develop an objective function with high mechanical pumping efficiency and low reflux to find optimal peristalsis conditions. We show that optimal wall longitudinal motion contributes substantially to limiting reflux during peristalsis. The results suggest that the optimal form of wall longitudinal velocity is a linear function of the wall transverse coordinate, moving forward with the wave when the tube is distended and retracting when contracted. Our results are in general agreement with clinical observations of ureteral peristalsis.

Reconstructions of prehistoric vegetation composition help establish natural baselines, variability, and trajectories of forest dynamics before and during the emergence of intensive anthropogenic land use. Pollen–vegetation models (PVMs) enable such reconstructions from fossil pollen assemblages using process-based representations of taxon-specific pollen production and dispersal. However, several PVMs and variants now exist, and the sensitivity of vegetation inferences to PVM selection, variant, and calibration domain is poorly understood. Here, we compare the reconstructions, parameter estimates, and structure of a Bayesian hierarchical PVM, STEPPS, both to observations and to REVEALS, a widely used PVM, for the pre–Euro-American settlement-era vegetation in the northeastern United States (NEUS). We also compare NEUS-based STEPPS parameter estimates to those for the upper midwestern United States (UMW). Both PVMs predict the observed macroscale patterns of vegetation composition in the NEUS; however, reconstructions of minor taxa are less accurate and predictions for some taxa differ between PVMs. These differences can be attributed to intermodel differences in structure and parameter estimates. Estimates of pollen productivity from STEPPS broadly agree with estimates produced for use in REVEALS, while comparison between pollen dispersal parameter estimates shows no significant relationship. STEPPS parameter estimates are similar between the UMW and NEUS, suggesting that STEPPS parameter estimates are transferable between floristically similar regions and scales.

The objective of this experiment was to determine the effectiveness and crop safety of glyphosate vs. alternative herbicides for weed control in glyphosate-resistant alfalfa. Glyphosate-resistant alfalfa was established at two sites in Pennsylvania in 2004 and in 2005, and herbicides were applied either PRE or POST for weed control. Data were collected on herbicide performance, alfalfa and weed yield, and forage quality. Alfalfa forage response to weed control was variable and depended on weed severity. A single or split application of glyphosate provided similar or better weed control than conventionally based herbicide programs. The most differences from weed control occurred during the first harvest and dissipated in subsequent harvests. Cumulative alfalfa yield for the establishment year of the spring seeding was 26% lower in the untreated check relative to the mean of the herbicide-treated plots in 2004; but no differences were detected in 2005. Forage quality was highest where weed content of the forage was lowest. Effective management of weeds with herbicides during alfalfa establishment can improve forage yield and quality, and weed control is particularly important when summer annual weed populations are severe and emerge with the crop.

Field studies were conducted at 35 sites throughout the north-central United States in 1998 and 1999 to determine the effect of postemergence glyphosate application timing on weed control and grain yield in glyphosate-resistant corn. Glyphosate was applied at various timings based on the height of the most dominant weed species. Weed control and corn grain yields were considerably more variable when glyphosate was applied only once. The most effective and consistent season-long annual grass and broadleaf weed control occurred when a single glyphosate application was delayed until weeds were 15 cm or taller. Two glyphosate applications provided more consistent weed control when weeds were 10 cm tall or less and higher corn grain yields when weeds were 5 cm tall or less, compared with a single application. Weed control averaged at least 94 and 97% across all sites in 1998 and 1999, respectively, with two glyphosate applications but was occasionally less than 70% because of late emergence of annual grass and Amaranthus spp. or reduced control of Ipomoea spp. With a single application of glyphosate, corn grain yield was most often reduced when the application was delayed until weeds were 23 cm or taller. Averaged across all sites in 1998 and 1999, corn grain yields from a single glyphosate application at the 5-, 10-, 15-, 23-, and 30-cm timings were 93, 94, 93, 91, and 79% of the weed-free control, respectively. There was a significant effect of herbicide treatment on corn grain yield in 23 of the 35 sites when weed reinfestation was prevented with a second glyphosate application. When weed reinfestation was prevented, corn grain yield at the 5-, 10-, and 15-cm application timings was 101, 97, and 93% of the weed-free control, respectively, averaged across all sites. Results of this study suggested that the optimum timing for initial glyphosate application to avoid corn grain yield loss was when weeds were less than 10 cm in height, no more than 23 d after corn planting, and when corn growth was not more advanced than the V4 stage.

The critical period for weed control for many crops has been well investigated and the results have been used to develop better weed management recommendations. However, research is limited on the critical period for weed control for alfalfa, a perennial crop with multiple harvests. With the advent of new, more effective POST herbicides for alfalfa, an understanding of the critical period may further enhance forage yield. The objective of this study was to determine the critical period for weed control in spring-seeded alfalfa. Alfalfa was seeded conventionally at two locations in Pennsylvania in the spring of 2004 and 2005; glyphosate and glyphosate-resistant alfalfa were used for weed management. A surrogate weed, Japanese millet, was seeded at three planting rates to simulate varied levels of weed density. In the analysis, the critical period for weed control was identified for the 2004 seedings, but not for 2005. In 2004, the critical period varied by location, but began at the 0.5 trifoliate alfalfa growth stage and ended at the 7 trifoliate growth stage. When identified, the critical period was similar for both first-harvest yield and first-year cumulative yield. Higher weed density caused the critical period to begin earlier than under lower weed densities, but weed density had no effect on when the critical period ended. Under moderate to heavy weed populations, the critical period for weed control can increase herbicide use efficiency and maximize alfalfa returns, although under low weed severity, the critical period may not exist.

A survey of seven production fields in Indiana, Illinois, and Ohio was conducted to assess henbit and purple deadnettle growth and soybean cyst nematode (SCN) development and reproduction on these weeds. Autumn and spring growth of purple deadnettle and henbit was influenced by location within each state. In general, winter annual weeds were larger in size and reached maturity earlier in the spring at the southern sample sites than those in the north. All growth stages of SCN were found to be associated with henbit and purple deadnettle at both autumn and spring sample timings. SCN juveniles were generally found infecting roots at highest abundance in the spring. SCN cyst and egg production also were widespread and occurred to a much higher degree during the autumn than the spring developmental period. The results of this survey indicate that management tactics designed to minimize the potential for SCN reproduction on winter annual weeds would probably be most effective if conducted in the autumn, when the majority of SCN reproduction occurred. However, spring populations of winter annual weeds that harbor SCN juveniles might facilitate additional SCN reproduction and population increase if the weeds are not controlled in a timely manner prior to planting.