In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

Direct numerical simulations are performed to explore the effects of the rotating direction of the vertically asymmetric rough wall on the transport properties of Taylor–Couette (TC) flow, up to a Taylor number of ${Ta} = 2.39\times 10^{7}$. It is shown that, compared with the smooth wall, the rough wall with vertical asymmetric strips can enhance the dimensionless torque ${Nu}_{\omega }$. More importantly, at high Ta, clockwise rotation of the inner rough wall (where the fluid is sheared by the steeper slope side of the strips) results in a significantly greater torque enhancement compared to counter-clockwise rotation (where the fluid is sheared by the smaller slope side of the strips), due to the larger convective contribution to the angular velocity flux. However, the rotating direction has a negligible effect on the torque at low Ta. The larger torque enhancement caused by the clockwise rotation of the vertically asymmetric rough wall at high Ta is then explained by the stronger coupling between the rough wall and the bulk, attributed to the larger biased azimuthal velocity towards the rough wall at the mid-gap of the TC system, the increased turbulence intensity manifested by larger Reynolds stress and a thinner boundary layer, and the more significant contribution of the pressure force on the surface of the rough wall to the torque.

N-3 long-chain (≥C20) PUFA (LC-PUFA) are vital fatty acids for fish and humans. As a main source of n-3 LC-PUFA for human consumers, the n-3 LC-PUFA content of farmed fish is important. Previously, we identified fatty acid-binding protein (fabp)-4 as a candidate gene for regulating the n-3 LC-PUFA content. Herein, we further assessed the role of fabp4 in this process. First, a 2059 bp promoter sequence of fabp4 in Trachinotus ovatus was cloned and, using progressive deletion, determined −2006 bp to −1521 bp to be the core promoter sequence. The PPAR-γ binding sites were predicted to occur in this region. A luciferase reporter assay showed that the promoter activity of fabp4 decreased following mutation of the PPARγ binding site and that PPARγ increased the fabp4 promoter activity in a dose-dependent manner, implying that T. ovatus fabp4 is a target of PPARγ. The overexpression of fabp4 or PPARγ increased the DHA content in hepatocytes, whereas suppression of their expression diminished this effect, suggesting that both fabp4 and PPARγ play an active role in regulating DHA content. Moreover, the inhibition of fabp4 attenuated the increase in PPARγ-mediated DHA content, and the overexpression of fabp4 alleviated this effect. Collectively, our findings indicated that fabp4, which is controlled by PPARγ, plays an important role in DHA content regulation. The new regulation axis can be considered a promising novel target for increasing the n-3 LC-PUFA content in T. ovatus.

With the progress in science and technology, hazardous chemicals are becoming more essential in chemical products, industrial and agricultural production, and daily life. Hazardous chemicals have poisoning, corrosive, explosive, and combusting natures; once on fire, they can trigger a chain of catastrophic incidences, resulting in casualties, property loss, and environmental pollution and posing hazards to life and property. Using the “8–12” explosion of the Ruihai Logistics warehouse in Tianjin Port (Binhai New District, China), the present study analyzes the characteristics of trauma of the casualties in this accident and the emergency medical rescue strategies. The goals were to improve the ability of emergency rescue in such accidents and to save people’s lives and property to the maximum extent.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

In this article, the development course and current research status of physiological information monitoring equipment are briefly reviewed and analyzed. The research progress of cardiopulmonary resuscitation (CPR) equipment at home and abroad, as well as the advantages and disadvantages of existing CPR equipment, are the main points of discussion. This article discusses the design feasibility and technical points of the portable integrated basic life support machine, based on existing equipment and technology, and summarizes possible interesting future research directions.

We aimed to describe the clinical features in coronavirus disease 2019 (COVID-19) cases. We studied 134 critically ill COVID-19 cases from 30 December 2019 to 20 February 2020 in an intensive care unit (ICU) at Wuhan Jinyintan Hospital. Demographics, underlying diseases, therapy strategies and test results were collected and analysed from patients on admission, admission to the ICU and 48 h before death. The non-survivors were older (65.46 (s.d. 9.74) vs. 46.45 (s.d. 11.09)) and were more likely to have underlying diseases. The blood group distribution of the COVID-19 cases differed from that of the Han population in Wuhan, with type A being 43.85%; type B, 26.92%; type AB, 10% and type O, 19.23%. Non-survivors tend to develop more severe lymphopaenia, with higher C-reactive protein, interleukin-6, procalcitonin, D-dimer levels and gradually increased with time. The clinical manifestations were non-specific. Compared with survivors, non-survivors more likely to have organ function injury, and to receive mechanical ventilation, either invasively or noninvasively. Multiple organ failure and secondary bacterial infection in the later period is worthy of attention.

Dual-chirped difference frequency generation (DFG) is an advantageous technique for generating the broadband mid-infrared (IR) idler wave, which is inaccessible by a population-inversion-based laser system. In principle, the generated idler wave may even suffer a spectrum broadening compared with the driving pulsed lasers if the pump and signal waves are oppositely chirped. However, broadband phase-matching is always the determining factor for the resulting efficiency and the bandwidth of the generated idler wave. In this study, specific to an oppositely dual-chirped DFG scheme, we derive the precondition to realize broadband frequency conversion, wherein a negative $(1/\unicode[STIX]{x1D710}_{p}-1/\unicode[STIX]{x1D710}_{i})/(1/\unicode[STIX]{x1D710}_{s}-1/\unicode[STIX]{x1D710}_{i})$, in terms of the correlation coefficient of the group velocity ($\unicode[STIX]{x1D70E}$), is necessary. However, most birefringence bulk crystals can only provide the required material dispersions in limited spectral regions. We show that the periodically poled lithium niobate crystal that satisfies an inactive Type-II (eo-o) quasi-phase-matching condition has a stable negative $\unicode[STIX]{x1D70E}$ and exerts the expected broadband gain characteristic across an ultra-broad idler spectral region $(1.7{-}4.0~\unicode[STIX]{x03BC}\text{m})$. Finally, we propose and numerically verify a promising DFG configuration to construct a tunable mid-IR spectrum broader based on the broadband phase-matched oppositely dual-chirped DFG scheme.

Since December 2019, several new infectious diseases, mainly lung diseases caused by novel coronavirus infections, have been discovered in Wuhan, Hubei Province. With the spread of the epidemic, cases in other regions of China and abroad have been confirmed. This sudden outbreak of a new type of infectious disease has seriously threatened people’s health and safety, and China has adopted strong prevention and control measures in response. To provide a reference for international health emergency management workers, this article summarizes, from an academic perspective, the main prevention and control measures taken in China.

Disasters such as an earthquake, a flood, and an epidemic usually lead to large numbers of casualties accompanied by disruption of the functioning of local medical institutions. A rapid response of medical assistance and support is required. Mobile hospitals have been deployed by national and international organizations at disaster situations in the past decades, which play an important role in saving casualties and alleviating the shortage of medical resources. In this paper, we briefly introduce the types and characteristics of mobile hospitals used by medical teams in disaster rescue, including the aspects of structural form, organizational form, and mobile transportation. We also review the practices of mobile hospitals in disaster response and summarize the problems and needs of mobile hospitals in disaster rescue. Finally, we propose the development direction of mobile hospitals, especially on the development of intelligence, rapid deployment capabilities, and modularization, which provide suggestions for further research and development of mobile hospitals in the future.

This article presents a brief review of our case studies of data-driven Integrated Computational Materials Engineering (ICME) for intelligently discovering advanced structural metal materials, including light-weight materials (Ti, Mg, and Al alloys), refractory high-entropy alloys, and superalloys. The basic bonding in terms of topology and electronic structures is recommended to be considered as the building blocks/units constructing the microstructures of advanced materials. It is highlighted that the bonding charge density could not only provide an atomic and electronic insight into the physical nature of chemical bond of materials but also reveal the fundamental strengthening/embrittlement mechanisms and the local phase transformations of planar defects, paving a path in accelerating the development of advanced metal materials via interfacial engineering. Perspectives on the knowledge-based modeling/simulations, machine-learning knowledge base, platform, and next-generation workforce for sustainable ecosystem of ICME are highlighted, thus to call for more duty on the developments of advanced structural metal materials and enhancement of research productivity and collaboration.

Both fibronectin (FN) and filamentous actin (F-actin) fibers play a critical role for endothelial cells (ECs) in responding to shear stress and modulating cell alignment and functions. FN is dynamically coupled to the F-actin cytoskeleton via focal adhesions. However, it is unclear how ECs cooperatively remodel their subcellular FN matrix and intracellular F-actin cytoskeleton in response to shear stress. Current studies are hampered by the lack of a reliable and sensitive quantification method of FN orientation. In this study, we developed a MATLAB-based feature enhancement method to quantify FN and F-actin orientation. The role of F-actin in FN remodeling was also studied by treating ECs with cytochalasin D. We have demonstrated that FN and F-actin codistributed and coaligned parallel to the flow direction, and that F-actin alignment played an essential role in regulating FN alignment in response to shear stress. Our findings offer insight into how ECs cooperatively remodel their subcellular ECM and intracellular F-actin cytoskeleton in response to mechanical stimuli, and are valuable for vascular tissue engineering.

In this paper the asymmetric shock reflection configurations in two-dimensional steady flows have been studied theoretically. For an overall Mach reflection, it is found that the horizontal distance between both triple points in the Mach stem is related to the angles of two slip streams. Based on the features of the converging stream tube, several assumptions are put forward to perform better the wave configurations near the slip streams. Therefore, we present an analytical model here to describe the asymmetric overall Mach reflection configurations which agrees well with the computational and experimental results.

This article outlines the evolution of a rescue team in responding to adenovirus prevention with a deployable field hospital. The local governments mobilized a shelter hospital and a rescue team consisting of 59 members to assist with rescue and response efforts after an epidemic outbreak of adenovirus. We describe and evaluate the challenges of preparing for deployment, field hospital maintenance, treatment mode, and primary treatment methods. The field hospital established at the rescue scene consisted of a medical command vehicle, a computed tomography shelter, an X-ray shelter, a special laboratory shelter, an oxygen and electricity supply vehicle, and epidemic prevention and protection equipment. The rescue team comprised paramedics, physicians, X-ray technicians, respiratory therapists, and logistical personnel. In 22 days, more than 3000 patients with suspected adenovirus infection underwent initial examinations. All patients were properly treated, and no deaths occurred. After emergency measures were implemented, the spread of adenovirus was eventually controlled. An emergency involving infectious diseases in less-developed regions demands the rapid development of a field facility with specialized medical personnel when local hospital facilities are either unavailable or unusable. An appropriate and detailed prearranged action plan is important for infectious diseases prevention. (Disaster Med Public Health Preparedness. 2018;12:109–114)

Disaster can strike people in any community at any time anywhere in the world. Disasters occur with high frequency, take on multiple forms, and exert wide influence, typically causing property damage, injuries, and death. As the world’s largest developing country, China incurs great costs when a disaster hits. After the Wenchuan earthquake in 2008, the Chinese government focused its attention on the construction of an emergency response system, the creation of disaster prevention and mitigation systems, and the development of a disaster medicine program. Here, we describe the current status of disaster medicine in China, focusing on the following four aspects: the Emergency Management System, Education & Training, Rescue Practices, and Research. We also discuss the future of disaster medicine in China. (Disaster Med Public Health Preparedness. 2018;12:157–165)

Twins reared apart provide a fascinating experiment to distinguish genetic from environmental influences. However, there is as yet no broad report on distribution of twins reared apart, especially in the Chinese population. In this study, information on 18,295 volunteer twin pairs of all age groups was compiled in nine provinces or cities of China, and questionnaires were used for zygosity determination. It was discovered that twins reared apart from 0 to 10 years of age accounted for 2.2% of all twin interviewees, with the proportion of this 0–10 group separated before 1, 2, and 5 years old, accounting for 65.3%, 76.1%, and 91.3%, respectively. The proportion of twins reared apart is not significantly related to zygosity or gender, but it is related to region and twin age. As the age of twins lowers, the proportion of those reared apart gradually decreases. Twins reared apart will become rarer in the future and therefore should be cherished as a resource.

Cryopreservation can cause cumulus cell damage around the immature oocytes, which may result in poor subsequent development. To evaluate the effect of the meiosis stage on the cumulus cell cryoinjury and determine the suitable stage for cryopreservation in immature oocytes, mouse oocytes at germinal vesicle (GV) and germinal vesicle breakdown (GVBD) stages were vitrified using open pulled straw (OPS) method. Cumulus cells damage was scored immediately after thawing by double-fluorescent staining. The survival rate of the oocytes was evaluated and the subsequent development of oocytes was assessed through in vitro culture (IVC) and in vitro fertilization (IVF) separately. After vitrification, a higher proportion of cumulus cells of GV oocytes were damaged than those of GVBD and untreated control groups. The survival rate of vitrified GVBD oocytes (94.1%) was significantly higher (p < 0.05) than that of GV oocytes (85.4%). Oocytes vitrified at GVBD stage (55.7%) showed similar cleavage rate compared to those at GV stage (49.2%), but significantly higher (p < 0.05) blastocyst rate (40.9% vs. 27.4%). These results demonstrate that oocytes at GVBD stage remain better cumulus membrane integrity and developmental ability during vitrification than those at GV stage, indicating they are more suitable for immature oocytes cryopreservation in mice.

Combining the long serial analysis of gene expression (LongSAGE) and the generation of longer cDNA fragments from serial analysis of gene expression tags for gene identification (GLGI) technique, a new strategy called modified GLGI (M-GLGI) was developed to isolate unknown 3′ expressed sequence tags (ESTs) and discover novel genes. A 17 bp LongSAGE tag was used as sense primer instead of a 10-base SAGE tag; PCR reaction was performed under an appropriate annealing temperature for each tag; universal DNA polymerase was used in PCR amplification instead of Pfu enzyme; a common cloning strategy using pMD-18T vector and Escherichia coli DH5α cells were used instead of a special vector and competent cells. Moreover, ESTs isolated by M-GLGI had 3′ ends with the polyadenylation signals and poly(dA) tails. This method is more sensitive for identifying genes expressed in low abundance than conventional EST sequencing.

The fractional concentration of Ni-vacancies in NiAl at high temperature has been determined for compositions between 50 and 53 at.% Ni from measurements using perturbed angular correlation of gamma rays (PAC). The vacancies were detected by quadrupole interactions induced at nearby 111In/Cd impurity probes present on the Al sublattice in high dilution. One set of measurements was made at high temperature. A second set made after rapid quenching exhibited an enhancement of Ni-vacancy site fractions that is attributed to diffusion and trapping of vacancies during quenching. The composition dependence of the enhancement was analyzed assuming that the enhancement is proportional to the root-mean-square diffusion length during quenching. The experimental dependence on composition is found to be consistent with bulk diffusion data. The methodology developed clarifies how local environments of impurity probes are modified during rapid quenching. In addition, it is shown that there is an enormous increase in the mobility of vacancies with increasing deviation of the composition from stoichiometry. Diffusion mechanisms that can explain the data trends are discussed.