A high-energy picosecond 355 nm ultraviolet (UV) laser operating at 100 Hz was demonstrated. A 352 mJ, 69 ps, 1064 nm laser at 100 Hz was realized firstly by cascaded regenerative, laser diode end-pumped single-pass and side-pumped main amplifiers. The stimulated Raman scattering-based beam shaping technique, thermally induced birefringence compensation and 4f spatial filter-image relaying systems were used to maintain a relatively homogeneous beam intensity distribution during the amplification process. By using lithium triborate crystals for second- and third-harmonic generation (THG), a 172 mJ, approximately 56 ps, 355 nm UV laser was achieved with a THG conversion efficiency of 49%. To the best of our knowledge, it is the highest pulse energy of a picosecond 355 nm UV laser so far. The beam quality factor ${M}^2$ and pulse energy stability were ${M}_x^2$=3.92, ${M}_y^2$=3.71 and root mean square of 1.48%@3 hours. This laser system could play significant roles in applications including photoconductive switch excitation, laser drilling and laser micro-fabrication.

Dietary n-3 PUFA may have potential benefits in preventing peptic ulcer disease (PUD). However, data from observational epidemiological studies are limited. Thus, we conducted a Mendelian randomisation analysis to reveal the causal impact of n-3 PUFA on PUD. Genetic variants strongly associated with plasma levels of total or individual n-3 PUFA including plant-derived α-linolenic acid and marine-derived EPA, DPA and DHA were enrolled as instrumental variables. Effect size estimates of the n-3 PUFA-associated genetic variants with PUD were evaluated using data from the UK biobank. Per one sd increase in the level of total n-3 PUFA in plasma was significantly associated with a lower risk of PUD (OR = 0·91; 95 % CI 0·85, 0·99; P = 0·020). The OR were 0·81 (95 % CI 0·67, 0·97) for EPA, 0·72 (95 % CI 0·58, 0·91) for DPA and 0·87 (95 % CI 0·80, 0·94) for DHA. Genetically predicted α-linolenic acid levels in plasma had no significant association with the risk of PUD (OR = 5·41; 95 % CI 0·70, 41·7). Genetically predicted plasma levels of n-3 PUFA were inversely associated with the risk of PUD, especially marine-based n-3 PUFA. Such findings may have offered an effective and feasible strategy for the primary prevention of PUD.

To alleviate the growth inhibition, and intestinal damage of Chinese mitten crab (Eriocheir sinensis) induced by low fishmeal diets (LF), an 8-week feeding trial was conducted to evaluate the addition of dietary soybean-derived bioactive peptides (SBP) in LF diets on the regulation of growth, digestion and intestinal health. The crabs were fed isonitrogenous and isoenergetic conventional diet and LF diets (10 % fishmeal replaced by soybean meal, LF) supplemented with 0, 1 %, 2 %, 4 % and 6 % SBP, respectively. The results showed that LF diet inhibited growth while inclusion of SBP quadratically remitted the growth inhibition induced by LF. For digestive function, increasing addition level of SBP quadratically improved the α-amylase and trypsin activities. For antioxidant function, LF group significantly increased the malondialdehyde content, while SBP linearly decreased the malondialdehyde level and cubically increased the anti-superoxide anion activity and total antioxidant capacity level. For intestinal health, the peritrophic membrane (PM) almost completely separated from the inner wall of the intestinal lumen, the epithelial cells reduced, the muscularis became thinner and the apoptotic signals increased in LF group; with SBP addition, the intestinal morphology was improved, with the PM adhering to the inner wall of the intestinal lumen, an increase in the number of epithelial cells and an increase in the thickness of the muscularis. Additionally, there was a decrease in apoptotic signals. Dietary SBP also increased the expression of PT and Crustin1 quadratically and decreased the expression of ALF1 linearly, ALF3 and ILF2 quadratically.

Nonlinear compression has become an obligatory technique along with the development of ultrafast lasers in generating ultrashort pulses with narrow pulse widths and high peak power. In particular, techniques of nonlinear compression have experienced a rapid progress as ytterbium (Yb)-doped lasers with pulse widths in the range from hundreds of femtoseconds to a few picoseconds have become mainstream laser tools for both scientific and industrial applications. Here, we report a simple and stable nonlinear pulse compression technique with high efficiency through cascaded filamentation in air followed by dispersion compensation. Pulses at a center wavelength of 1040 nm with millijoule pulse energy and 160 fs pulse width from a high-power Yb:CaAlGdO4 regenerative amplifier are compressed to 32 fs, with only 2.4% loss from the filamentation process. The compressed pulse has a stable output power with a root-mean-square variation of 0.2% over 1 hour.

The Wood Snipe Gallinago nemoricola is one of the least known shorebird species, and its habitat associations are very poorly understood. Here we provide the first assessment of the habitat use of the Wood Snipe during the breeding season. Between May and July 2021 at a 4-km2 alpine meadow in Sichuan province, China, we conducted population surveys and behavioural observations to identify sites where breeding Wood Snipe occurred and foraged. We quantified the habitat characteristics and food resource availability of these sites and compared them with randomly selected “background” sites. Comparison between 34 occurrence sites and 25 background sites indicated that during the breeding season, Wood Snipes are not distributed evenly across alpine meadow habitats, but preferred habitats in the lower part (3,378–3,624 m) of the alpine meadow with intermediate levels of soil moisture. In addition, comparison between 17 foraging sites and 24 background sites showed that the Wood Snipe tended to forage at sites with higher soil fauna abundance. We found weak evidence for denser vegetation cover at its height and no evidence for other biotic habitat variables such as vegetation composition or other abiotic habitat variables such as slope, soil penetrability, or disturbance level to influence Wood Snipe habitat associations. Our results suggest that the actual distribution range of the Wood Snipe during the breeding season may be smaller than expected from the extent of apparently suitable habitat. We advise caution in evaluating the potential habitat availability and distribution of the Wood Snipe, and call for further research to better understand the ecology of this rare species to inform its conservation.

The oscillatory Kelvin–Helmholtz (K–H) instability of a planar liquid sheet was experimentally investigated in the presence of an axial oscillating gas flow. An experimental system was initiated to study the oscillatory K–H instability. The surface wave growth rates were measured and compared with theoretical results obtained using the authors’ early linear method. Furthermore, in a larger parameter range experimentally studied, it is interesting that there are four different unstable modes: first disordered mode (FDM), second disordered mode (SDM), K–H harmonic unstable mode (KHH) and K–H subharmonic unstable mode (KHS). These unstable modes are determined by the oscillating amplitude, oscillating frequency and liquid inertia force. The frequencies of KHH are equal to the oscillating frequency; the frequency of KHS equals half the oscillating frequency, while the frequencies of FDM and SDM are irregular. By considering the mechanism of instability, the instability regime maps on the relative Weber number versus liquid Weber number (Werel–Wel) and the Weber number ratio versus the oscillating frequency (Werel/Wel–$\varOmega$s2) were plotted. Among these four modes, KHS is the most unexpected: the frequency of this mode is not equal to the oscillating frequency, but the surface wave can also couple with the oscillating gas flow. Linear instability theory was applied to divide the parameter range between the different unstable modes. According to linear instability theory, K–H and parametric unstable regions both exist. However, note that all four modes (KHH, KHS, FDM and SDM) corresponded primarily to the K–H unstable region obtained from the theoretical analysis. Nevertheless, the parametric unstable mode was also observed when the oscillating frequency and amplitude were relatively low, and the liquid inertia force was relatively high. The surface wave amplitude was small but regular, and the evolution of this wave was similar to that of Faraday waves. The wave oscillating frequency was half that of the surface wave.

In order to optimize the performance of the transmission network (TN), this paper introduces the random fractal search algorithm based on the beetle antenna search algorithm, thus proposing the random fractal beetle antenna algorithm (SFBA). The main work of this research is as follows: (1) in the beetle antenna search algorithm, this study used a population of beetles and introduced elite members of the population in order to make the algorithm more stable and to some extent improve the accuracy of its answers. (2) Utilizing the elite reverse learning method and the leader’s multilearning strategy for elites helps to strike a balance between the global exploration and local development of the algorithm. This strategy also further improves the ability of the algorithm to find the optimal solution. (3) Experiments on real experimental data show that the SFBA algorithm proposed in this paper is effective in improving TN performance. In summary, the research content of this paper provides a good reference value for the performance optimization of TN in actual production.

Due to the lack of research between the inner layers in the structure of colonic mucous and the metabolism of fatty acid in the constipation model, we aim to determine the changes in the mucous phenotype of the colonic glycocalyx and the microbial community structure following treatment with Rhubarb extract in our research. The constipation and treatment models are generated using adult male C57BL/6N mice. We perform light microscopy and transmission electron microscopy (TEM) to detect a Muc2-rich inner mucus layer attached to mice colon under different conditions. In addition, 16S rDNA sequencing is performed to examine the intestinal flora. According to TEM images, we demonstrate that Rhubarb can promote mucin secretion and find direct evidence of dendritic structure-linked mucus structures with its assembly into a lamellar network in a pore size distribution in the isolated colon section. Moreover, the diversity of intestinal flora has noticeable changes in constipated mice. The present study characterizes a dendritic structure and persistent cross-links have significant changes accompanied by the alteration of intestinal flora in feces in models of constipation and pretreatment with Rhubarb extract.

This study investigates the dynamics of low-viscosity nanodroplets impacting surfaces with static contact angles from θ = 73° to 180° via molecular dynamics (MD) simulations. Two typical morphologies of impacting nanodroplets are observed at the maximum spreading state, a Hertz-ball-like in a low-Weber-number range and a thin-film-like in a high-Weber-number range. Only inertial and capillary forces dominate the impact for the former, whereas viscous force also becomes dominant for the latter. Regardless of morphologies at the maximum spreading state, the ratio of spreading time to contact time always remains constant on an ideal superhydrophobic surface with θ = 180°. With the help of different kinematic approximations of the spreading time and scaling laws of the contact time, scaling laws of the maximum spreading factor ${\beta _{max}}\sim W{e^{1/5}}$ in the low-Weber-number range (capillary regime) and ${\beta _{max}}\sim W{e^{2/3}}R{e^{ - 1/3}}$ (or ${\beta _{max}}\sim W{e^{1/2}}O{h^{1/3}}$) in the high-Weber-number range (cross-over regime) are obtained. Here, We, Re, and Oh are the Weber number, Reynolds number, and Ohnesorge number, respectively. Although the scaling laws are proposed only for the ideal superhydrophobic surface, they are tested valid for θ over 73° owing to the ignorable zero-velocity spreading effect. Furthermore, combining the two scaling laws leads to an impact number, $W{e^{3/10}}O{h^{1/3}} = 2.1$. This impact number can be used to determine whether viscous force is ignorable for impacting nanodroplets, thereby distinguishing the capillary regime from the cross-over regime.

The orogenic process and crustal growth of the Changning–Menglian Palaeo-Tethys orogenic belt in the southeastern Tibetan Plateau is not fully understood. Triassic Caojian rhyolites and granites occur extensively in this orogenic belt and represent important constraints for this issue. This study aims to examine the relationships between the Triassic Caojian rhyolites and granites and to gain a better understanding of their possible petrogenesis. The study used zircon U–Pb geochronology, trace element analyses and Sr–Nd–Hf isotope data to better understand the relationships and possible origin of the rhyolites and granites. Recent zircon U–Pb ages indicated that the Caojian rhyolites were emplaced at 227.2 Ma, whereas age estimates for Caojian granites were slightly older (233.4–236.9 Ma). The Caojian rhyolites are enriched in large-ion lithophile elements and high-field-strength elements, with elevated FeOtot/MgO and Ga/Al ratios. However, they are significantly depleted in Ba, Sr, Eu, P and Ti. These geochemical characteristics indicate that they have an A-type affinity. Furthermore, the Caojian granites comprise biotite monzogranites and granodiorites and show unfractionated composition. Mineralogically, the Caojian granites were found to contain diagnostic I-type minerals such as hornblende. Geochemical data suggest that the petrogenesis of the Triassic Caojian rhyolites is characterized by rejuvenation of crystal mush represented by the Triassic Caojian granites. The necessary thermal input was supplied by mafic magma. This magmatic evolution was likely related to lithospheric delamination and upwelling of the asthenosphere during the Mid- to Late Triassic, forming post-collisional I-type granites and A-type volcanics in the Changning–Menglian Palaeo-Tethys orogenic belt.

Cu-doping and crystallographic site occupations within the half-Heusler (HH) TiNiSn, a promising thermoelectric material, have been examined by atom probe tomography. In particular, this investigation aims to better understand the influence of atom probe analysis conditions on the measured chemical composition. Under a voltage-pulsing mode, atomic planes are clearly resolved and suggest an arrangement of elements in-line with the expected HH (F-43m space group) crystal structure. The Cu dopant is also distributed uniformly throughout the bulk material. For operation under laser-pulsed modes, the returned composition is highly dependent on the selected laser energy, with high energies resulting in the measurement of excessively high absolute Ti counts at the expense of Sn and in particular Ni. High laser energies also appear to be correlated with the detection of a high fraction of partial hits, indicating nonideal evaporation behavior. The possible mechanisms for these trends are discussed, along with suggestions for optimal analysis conditions for these and similar thermoelectric materials.

We present experimentally obtained time-averaged vertical temperature profiles $\theta (z)$ in horizontal convection (HC) in water (Prandtl number $Pr \simeq 6$), which were measured near the heating and cooling plates that are embedded in the bottom of HC samples. Three HC rectangular samples of different sizes but the same aspect ratio $\varGamma \equiv L:W:H = 10:1:1$ ($L$, $W$ and $H$ are the length, width and height of the sample, respectively) were used in the experiments, which allowed us to study HC in a Rayleigh-number range $2 \times 10^{10} \lesssim {Ra} \lesssim 9 \times 10^{12}$. The measurements revealed that above the cooling plate, the mean temperature profiles have a universal scaling form $\theta (z/\lambda _c)$ with $\lambda _c$ being a $Ra$-dependent thickness of the cold thermal boundary layer (BL). The $\theta (z/\lambda _c)$-profiles agree well with solutions to a laminar BL equation in HC, which is derived under assumption that the large-scale horizontal velocity achieves its maximum near the plate and vanishes in the bulk. Above the heating plate, the mean temperature field has a double-layer structure: in the lower layer, the $\theta$ profiles scale with the hot thermal BL thickness $\lambda _h$, while in the upper layer, they again scale with $\lambda _c$. Both scaling forms are in good agreement with the solutions to the BL equation with a proper parameter choice.

In this article, we discuss the backgrounds and technical details about several smart manufacturing projects in a tier-one electronics manufacturing facility. We devise a process to manage logistic forecast and inventory preparation for electronic parts using historical data and a recurrent neural network to achieve significant improvement over current methods. We present a system for automatically qualifying laptop software for mass production through computer vision and automation technology. The result is a reliable system that can save hundreds of man-years in the qualification process. Finally, we create a deep learning-based algorithm for visual inspection of product appearances, which requires significantly less defect training data compared to traditional approaches. For production needs, we design an automatic optical inspection machine suitable for our algorithm and process. We also discuss the issues for data collection and enabling smart manufacturing projects in a factory setting, where the projects operate on a delicate balance between process innovations and cost-saving measures.

The Yangtze Block in South China constitutes an important Precambrian landmass in the present East Asian continent. The Neoproterozoic sedimentary successions of the Hengdan Group in the NW Yangtze Block record essential information for deciphering the Neoproterozoic tectonics along the NW margin. However, its depositional age, provenance and tectonic properties remain uncertain. Here, a combined analysis of detrital zircon U–Pb dating and geochemistry is performed on representative samples from the Hengdan Group. Concordant dating results of samples from the bottom and upper parts constrain the maximum depositional age at c. 720 Ma. Detrital zircon age patterns of samples reveal a uniformly pronounced age peak at c. 915–720 Ma, which is consistent with the magmatic pulses in domains at the NW end of the Yangtze Block. In addition, these samples display left-sloping post-Archaean Australian shale (PAAS)-normalized rare-earth element patterns and variable trace element patterns, resembling sediments accumulated in a basin related to an active continental margin geodynamic setting. Provenance analysis reveals that the main sources featured intermediate to felsic components, which experienced rapid erosion and sedimentation. These integrated new investigations, along with previous compilations, indicate that the Hengdan Group might have been deposited in a fore-arc basin controlled by subduction beneath the Bikou Terrane. Thus, such interpretation further supports proposals for subduction-related tectonics along the western margin of the Yangtze Block during the early Neoproterozoic.

The extent of intertidal flats in the Yellow Sea region has declined significantly in the past few decades, resulting in severe population declines in several waterbird species. The Yellow Sea region holds the primary stopover sites for many shorebirds during their migration to and from northern breeding grounds. However, the functional roles of these sites in shorebirds’ stopover ecology remain poorly understood. Through field surveys between July and November 2015, we investigated the stopover and moult schedules of migratory shorebirds along the southern Jiangsu coast, eastern China during their southbound migration, with a focus on the ‘Critically Endangered’ Spoon-billed Sandpiper Calidris pygmaea and ‘Endangered’ Nordmann’s Greenshank Tringa guttifer. Long-term count data indicate that both species regularly occur in globally important number in southern Jiangsu coast, constituting 16.67–49.34% and 64.0–80.67% of their global population estimates respectively, and it is highly likely that most adults undergo their primary moult during this southbound migration stopover. Our results show that Spoon-billed Sandpiper and Nordmann’s Greenshank staged for an extended period of time (66 and 84 days, respectively) to complete their primary moult. On average, Spoon-billed Sandpipers and Nordmann’s Greenshanks started moulting primary feathers on 8 August ± 4.52 and 27 July ± 1.56 days respectively, and their moult durations were 72.58 ± 9.08 and 65.09 ± 2.40 days. In addition, some individuals of several other shorebird species including the ‘Endangered’ Great Knot Calidris tenuirostris, ‘Near Threatened’ Bar-tailed Godwit Limosa lapponica, ‘Near Threatened’ Eurasian Curlew Numenius arquata and Greater Sand Plover Charadrius leschenaultii also underwent primary moult. Our work highlights the importance of the southern Jiangsu region as the primary moulting ground for these species, reinforcing that conservation of shorebird habitat including both intertidal flats and supratidal roosting sites in this region is critical to safeguard the future of some highly threatened shorebird species.

Accurate disparity prediction is a hot spot in computer vision, and how to efficiently exploit contextual information is the key to improve the performance. In this paper, we propose a simple yet effective non-local context attention network to exploit the global context information by using attention mechanisms and semantic information for stereo matching. First, we develop a 2D geometry feature learning module to get a more discriminative representation by taking advantage of multi-scale features and form them into the variance-based cost volume. Then, we construct a non-local attention matching module by using the non-local block and hierarchical 3D convolutions, which can effectively regularize the cost volume and capture the global contextual information. Finally, we adopt a geometry refinement module to refine the disparity map to further improve the performance. Moreover, we add the warping loss function to help the model learn the matching rule of the non-occluded region. Our experiments show that (1) our approach achieves competitive results on KITTI and SceneFlow datasets in the end-point error and the fraction of erroneous pixels $({D_1})$; (2) our proposed method particularly has superior performance in the reflective regions and occluded areas.

Radiocarbon (14C) has become a unique and powerful tracer in source apportionment of atmospheric carbonaceous particles. In this study, the Asia Pacific Economic Cooperation summit (APEC) held in Beijing in 2014 was used as a demonstration to research the source apportionment of atmosphere PM2.5. We used a 200 kV single stage accelerator mass spectrometer recently completed at China Institute of Atomic Energy (CIAE). The PM2.5 samples related to above case were collected, and the characteristics of radiocarbon in organic carbon (OC) and elemental carbon (EC) in samples were analyzed using the AMS. The results show that the Before-APEC pollution emission mode is different from the During-APEC and After-APEC pollution emission modes. For Before-APEC, During-APEC and After-APEC, the average values of fossil carbon fraction of OC are 0.463, 0.431 and 0.615, respectively, and those of EC are 0.644, 0.561 and 0.687. The fossil source contributions of traffic activities using fossil fuels to OC and EC are 15.8 % and 21.9 %, respectively. The fossil source contributions of industrial activities to OC and EC are 38.0 % and 8.2 %, respectively. It is about 7–10 days that is needed to take to regenerate the PM2.5 pollution caused by human activities.

Echinococcus granulosus sensu stricto (s.s.), Echinococcus multilocularis and Echinococcus canadensis are the common causes of human echinococcosis in China. An accurate species identification tool for human echinococcosis is needed as the treatments and prognosis are different among species. The present work demonstrates a method for the simultaneous detection of these three Echinococcus species based on multiplex polymerase chain reaction (mPCR). Specific primers of this mPCR were designed based on the mitochondrial genes and determined by extensive tests. The method can successfully detect either separated or mixed target species, and generate expected amplicons of distinct size for each species. Sensitivity of the method was tested by serially diluted DNA, showing a detection threshold as less as 0.32 pg for both E. granulosus s.s. and E. canadensis, and 1.6 pg for E. multilocularis. Specificity assessed against 18 other parasites was found to be 100% except weakly cross-react with E. shiquicus. The assay was additionally applied to 69 echinococcosis patients and 38 healthy persons, confirming the high reliability of the method. Thus, the mPCR described here has high application potential for clinical identification purposes, and can further provide a useful tool for evaluation of serology and imaging method.