Hostname: page-component-7c8c6479df-995ml Total loading time: 0 Render date: 2024-03-29T13:10:01.045Z Has data issue: false hasContentIssue false

Optical-televiewer-based identification and characterization of material facies associated with an Antarctic ice-shelf rift

Published online by Cambridge University Press:  14 September 2017

Bryn Hubbard
Affiliation:
Centre for Glaciology, Institute of Geography and Earth Sciences, Aberystwyth University, Aberystwyth, UK E-mail: byh@aber.ac.uk
Jean-Louis Tison
Affiliation:
Département des Sciences de la Terre et de l'Environnement, Faculté des Sciences, Université Libre de Bruxelles, Bruxelles, Belgium
Frank Pattyn
Affiliation:
Département des Sciences de la Terre et de l'Environnement, Faculté des Sciences, Université Libre de Bruxelles, Bruxelles, Belgium
Marie Dierckx
Affiliation:
Département des Sciences de la Terre et de l'Environnement, Faculté des Sciences, Université Libre de Bruxelles, Bruxelles, Belgium
Thierry Boereboom
Affiliation:
Département des Sciences de la Terre et de l'Environnement, Faculté des Sciences, Université Libre de Bruxelles, Bruxelles, Belgium
Denis Samyn
Affiliation:
Département des Sciences de la Terre et de l'Environnement, Faculté des Sciences, Université Libre de Bruxelles, Bruxelles, Belgium Department of Mechanical Engineering, Nagaoka University of Technology, Nagaoka, Japan
Rights & Permissions [Opens in a new window]

Abstract

We have drilled 13 boreholes within and around a through-cutting rift on the (unofficially named) Roi Baudouin Ice Shelf, East Antarctica. Logging by optical televiewer (OPTV) combined with core inspection has resulted in the identification and characterization of several material facies. Outside the rift, OPTV-imaged annual layering indicates ~150 years of accumulation over the 66 m length of one of the boreholes. Luminosity analysis of this image also reveals the presence of numerous dark melt layers as well as a systematic decrease in background luminosity, interpreted in terms of a progressive increase in light transmission during firnification. We identify four material facies within the rift: snow, granular ice, marine ice and unconsolidated platelets. We interpret the granular ice facies as snow that has been saturated by percolating sea water, and the underlying marine ice as compacted buoyant platelets that have adhered to the rift base. Core sections reveal the presence of tubular channels within the marine ice, indicating that it is macroporous and permeable to sea water. The lower boundary of this facies merges into a mushy layer of unconsolidated platelets that were successfully imaged by OPTV, revealing irregular sub-horizontal layering similar to that reported previously on the basis of (directional) borehole video.

Type
Research Article
Copyright
Copyright © The Author(s) [year] 2012

Introduction

An increasing body of evidence indicates that ice shelves are not composed exclusively of relatively uniform meteoric snow, firn and ice. Instead, they appear to be characterized by an intricate network of inherited structural weaknesses (e.g. Reference Shabtaie and BentleyShabtaie and Bentley, 1982; Reference Glasser and ScambosGlasser and Scambos, 2008) and to be composed of several different material types or facies, including marine ice formed by the aggregation and compaction of buoyant platelets formed within the sub-ice-shelf water cavity (e.g. Reference MorganMorgan, 1972; Reference Engelhardt and DetermannEngelhardt and Determann, 1987; Reference OerterOerter and others, 1992; Reference Tison, Ronveaux and LorrainTison and others, 1993; Reference Eicken, Oerter, Miller, Graf and KipfstuhlEicken and others, 1994; Reference Fricker, Popov, Allison and YoungFricker and others, 2001; Reference Holland, Corr, Vaughan, Jenkins and SkvarcaHolland and others, 2009). Indeed, this spatial variability in material composition (and therefore response to imposed stresses) may be central to dictating rates and patterns of both normal ice-shelf flow and ice-shelf disintegration during break-up. For example, the break-up pattern of the Larsen B ice shelf, Antarctic Peninsula, could only be modelled successfully upon introducing widespread spatial variations in ice softness, in this case assumed to involve marine or suture ice (Reference Khazendar, Rignot and LarourKhazendar and others, 2007). Steady-state modelling of the Larsen C ice shelf also shows an improved match between modelled and measured surface velocity vectors once spatial variations in ice softness, principally linear filaments of suture ice, are incorporated into the model (personal communication from D. Jansen, 2011). It is therefore clearly important to our understanding of current and future ice-shelf behaviour that we have a good knowledge of the spatial composition of ice shelves and in particular of zones of basal melting and of marine ice accretion.

One major recent development in terms of identifying and quantifying sub-ice-shelf processes and materials involves exploration by autonomous vehicles (Reference JenkinsJenkins and others, 2010). However, such expeditions are still in their infancy and are logistically demanding, restricting spatial coverage. Further, despite accessing the underside of ice shelves, they do not yet sample ice directly. Options for accessing and sampling from the interior of ice shelves directly therefore rely primarily on borehole drilling from the surface. For example, the Amery Ice Shelf Ocean Research (AMISOR) project (Reference CravenCraven and others, 2004, Reference Craven2005, Reference Craven, Allison, Fricker and Warner2009; Reference Roberts, Craven, Allison and NashRoberts and others, 2007; Reference Treverrow, Warner, Budd and CravenTreverrow and others, 2010) drilled to the base of the Amery Ice Shelf, East Antarctica, at two locations along a flowband underlain by marine ice. These borehole logs reveal that continental ice is underlain by a <~200m thick layer of marine ice formed by the adhesion of buoyant platelets onto the ice-shelf base. This marine ice layer is also known, from the analysis of core segments and borehole video (Reference CravenCraven and others, 2005), to become progressively more permeable and less consolidated towards its base. Specifically, the video analysis revealed several material properties of both the continental ice and the underlying marine ice, including the presence of frequent (relatively dark) melt layers and lenses within the bubbly (and therefore brighter) continental ice, and the presence of platelet-like crystals both forming the underlying marine ice and suspended within the borehole fluid. Video footage also revealed that the marine ice hosted brine cells and had a layered structure, both of which increased in intensity towards the ice-shelf base until eventually, within some tens of metres of the shelf–water interface, the texture of the ice became flaky and the brine cells opened up to form voids, resulting in highly permeable ‘honeycomb’ ice (Reference CravenCraven and others, 2005).

Drilling through ice shelves is logistically demanding and slow, particularly since most such shelves are several hundred metres thick even at their seaward edge. One means of reducing this demand may be to drill boreholes through the relatively thin base of ice-shelf rifts. Such rifts are common, particularly in zones of high lateral shear near the margins of ice-shelf flow units (Reference GlasserGlasser and others, 2009), and the infilling melange may only be some metres to tens of metres thick (e.g. Reference Fricker, Bassis, Minster and MacAyealFricker and others, 2005). Although this melange is largely composed of wind-blown snow, frozen sea water and fragments of ice talus, distinguishing it from the internal composition of the ice shelf proper, Reference Khazendar, Tison, Stenni, Dini and BondesanKhazendar and others (2001) and Reference Khazendar and JenkinsKhazendar and Jenkins (2003) demonstrated that rifts are also highly likely to be sites for the rapid formation of marine ice from below. Thus, drilling through the base of a through-cutting rift may well also provide ready access to newly formed and actively forming marine ice, as well as to other melange materials.

Once boreholes have been drilled through an ice shelf, logging by digital optical televiewer (OPTV) has the potential to provide important information in terms of identifying and characterizing the ice types intersected. OPTV differs in one fundamental respect from traditional (directional) borehole video in that OPTV acquires a geometrically accurate image of the complete borehole wall. This is achieved by the probe’s downward-looking digital camera recording a 360˚ annular image of the borehole wall as reflected in a hyperboloidal mirror (Fig. 1 a and b). Accurate winch control then allows the probe to be raised and lowered at a precise rate along the borehole, typically producing images with a vertical resolution that can be user-set to a pixel dimension as small as 1 mm and at a lateral resolution of either 360 or 720 pixels per row (~1.0mm and ~0.5mm per pixel, respectively, for a borehole of 12 cm diameter). This geometrical accuracy provides a powerful means of mapping the structures that intersect a borehole wall because each visible intersecting plane appears as a sinusoidal trace on the raw OPTV image. Here, the dip and dip-direction of each such plane (orientated by magnetometers located within the OPTV probe) are represented respectively by the amplitude and phase of the associated sinusoid (Fig. 1c and d). Structural analysis of an OPTV log thereby allows all such features to be located, characterized in terms of their thickness and appearance, and their orientations to be logged.

Fig. 1. Illustration of the principles of OPTV operation. (a) Image of OPTV probe and (b) expanded sketch of probe head, (c) schematic illustration of a borehole intersecting three closely spaced layers dipping west and (d) illustration of their equivalent sinusoids on the raw OPTV image.

OPTV was recently applied for the first time to ice boreholes by Reference Hubbard, Roberson, Samyn and Merton-LynHubbard and others (2008). Subsequently, Reference Roberson and HubbardRoberson and Hubbard (2010) applied the technique to an array of boreholes drilled by hot water at Midre Lovénbreen, Svalbard, in an attempt to determine the structural composition of this polythermal valley glacier. Here, OPTV logs successfully revealed bubble-rich layers and bubble clouds, debris bands (including individual clasts) and several generations of stratification and folding. In this case, where boreholes were drilled by hot water and no core was therefore retrieved, the OPTV analysis was particularly valuable in that it allowed ‘virtual’ core images to be recreated by rolling the raw (outward-looking) images acquired of the borehole walls and viewing them inwards. OPTV analysis can also potentially provide important complementary information from boreholes from which actual ice core has been recovered. First, OPTV views laterally into the ice surrounding the borehole, thereby providing a deep-field image with the capacity to reveal properties not easily identifiable from (or intersected by) a core that is typically 8–12 cm in diameter. Second, OPTV images cover the entire length (and circumference) of a borehole wall, whereas core may not be retrieved from the borehole’s full length, for example being absent from englacial channels or voids. Core sections can also be fractured beyond reconstruction. Third, OPTV imaging can view unconsolidated materials that may not be recoverable as a solid core. This facility may be particularly valuable, for example in boreholes that intersect unconsolidated honeycomb ice or sub-ice-shelf platelets. Despite this potential, however, OPTV has not yet been applied to ice-shelf boreholes.

In this paper, we report on the character and genetic interpretation of material facies as revealed by OPTV logs and preliminary core inspection from a series of boreholes drilled in and around a through-cutting rift located near the seaward edge of the Roi Baudouin Ice Shelf (RBIS), Antarctica. The aims of the study are twofold: (1) to evaluate the suitability of OPTV logs for the investigation of ice-shelf facies; and (2) to report on the spatial prevalence of, and to provide preliminary interpretations for, the facies intersected by our boreholes on the RBIS.

Field Site and Methods

Field site

The (unofficially named) RBIS is located on the Princess Ragnhild Coast, East Antarctica, at ~70˚ S, 24˚ E (Fig. 2a). The ice shelf extends southwest–northeast for ~350km along the coast and has a flow-parallel width of ~50– 100 km. The rift investigated herein is located within ~5km of the seaward edge of the ice shelf and both are aligned approximately parallel to each other (Fig. 2b). The rift forms the easternmost limb of a suite of fractures related to the presence of an ice rise located ~10 km upflow. Measured ice velocity in the region of the rift is ~350–380ma–1 (Reference Pattyn, de Brabander and HuyghePattyn and others, 2005), markedly lower than that predicted theoretically in the absence of the ice rise. The ice shelf overlies a relatively shallow ocean cavity with a sub-ice-shelf water column thickness of ~200–300m (Pattyn and others, unpublished information). We drilled 13 boreholes, each 5–66m long, in either the rift or the adjacent ice shelf. Of these, six penetrated the base of the rift, extending into the underlying cavity, and six were logged by OPTV (Fig. 2b; Table 1).

Table 1. Summary data for boreholes cored on the RBIS in 2008 and 2010

Fig. 2. Location map of (a) the general study site on the Roi Baudouin Ice Shelf (PES is Princess Elisabeth Station) and (b) the individual boreholes reported herein. Boreholes logged by OPTV are represented as open circles.

Methods

Boreholes were drilled (during December 2008 or December 2010) either by a mechanical SIPRE-type corer or by an adapted Eclipse ice drill. The latter was modified to enable coring through permeable ice saturated with sea water, requiring contacts within the drill assembly (including those within the slip ring) to be electrically isolated. Importantly, these adaptations allow the Eclipse drill to operate in boreholes filled with sea water, permitting coring below the local water level to the base of the ice shelf. Once drilled, OPTV analysis was carried out as soon as possible and usually within some tens of minutes in order to avoid borehole closure by freezing and, where boreholes penetrated the cavity, clogging by buoyant platelets rising up the sea-water column in the boreholes. The latter effect was unfortunately common, generally occurring within some minutes of the corer being removed from the hole and effectively preventing OPTV logging of several rift boreholes. Once logged, OPTV images were collated, analysed and prepared for presentation (including rolling to create virtual core images) using WellCAD software. This analysis included calculating the luminosity (expressed in non-dimensioned units of RGB pixel brightness) of each 1mm depth step, represented by the mean value of each ring of 720 pixels. Within some metres (depending on the optical transmissivity of the material being cored) of the borehole surface, recorded light is dominated by that transmitted from the surface, but below this zone it is exclusively composed of that reflected back from the borehole walls to the OPTV sensor. Since borehole illumination, achieved by a circular array of white LEDs, is uniform in time and therefore also in space as the probe moves along a borehole, the net luminosity of the recorded signal varies with the reflectivity of the material forming the borehole wall.

Results

Ice-shelf boreholes

The OPTV logs of the two boreholes cored into the ice shelf proper, 08-S1 and 10-S1 (Fig. 2b; Table 1), reveal similar material properties, with 66m long 10-S1 providing the longer record. The log of 10-S1 (Fig. 3 and 4), has three notable features. First, regularly repeated dark layers, which have a typical luminosity of <100 units lower than the local image background, can be observed along most of the length of the core. The spacing of these layers gradually decreases from ~1.0m near the borehole’s upper surface (e.g. five regularly spaced darker layers between 4 and 9 m depth in Fig. 3) to ~0.15m near its base (e.g. seven regularly spaced darker layers between 51.5 and 52.5 m depth in Fig. 3 and 4b). Although still visible, these layers are more difficult to distinguish from the (now darker) background towards the base of the borehole. Second, sharply defined very dark layers, typically with a luminosity that is >100 units lower than the local image background, are observed intermittently along the full length of the borehole. For example, four distinctive dark bands are located between 30 and 31 m depth, each of which is 5–20 cm thick (Fig. 3 and 4a). Thus, the luminosity of these layers is typically similar to, or darker than, that of the thinner and more regular layers noted above. Finally, if both the above sets of dark layers are removed from the analysis, the background reflected light intensity of the OPTV log of 10-S1 decreases consistently down the borehole, from typical values of ~400 near the ice-shelf surface to ~150 at the base of the borehole, visible in both Figures 3 and 4.

Fig. 3. OPTV log of the full length of ice-shelf core 10-S1. The raw OPTV image is plotted on the left-hand side of each panel and its rolled equivalent is plotted on the right. The luminosity trace overlaid on the raw OPTV image is sampled each millimetre in the vertical and is scaled to decrease, over the range 450–100 (non-dimensioned) units, to the right.

Fig. 4. Expanded rolled OPTV images of two 1 m long virtual core segments from ice-shelf core 10-S1 (Fig. 3): (a) 30–31m depth and (b) 51.5–52.5m depth.

Rift boreholes

We drilled ten boreholes into the base of the rift proper and one was drilled into the ramp formed in the rift tip (Fig. 2b; Table 1). Several of these boreholes intersected apparently fundamentally different material facies. The OPTV log of 08-T1, cored for 38m into the rift tip, was of uniformly high luminosity, similar to the material forming the matrix between the dark layers in 10-S1 (above). Indeed, the OPTV log of 08-T1 contrasts with that of 10-S1 in that the former is characterized by (1) fewer dark layers and (2) no apparent systematic decrease in the intensity of the background reflected light with depth.

All of the remaining ten boreholes were drilled directly into the base of the rift (Fig. 2b), intersecting a series of material facies which always appeared in the same order but which were not all present at every borehole. These facies are as described below.

Surface snow

Snow was present in the uppermost sections of most rift boreholes and was identified visually at the surface and as a very bright backscatter in OPTV logs. Where present, this layer extended only for a few metres below the surface.

Granular ice

This facies, defined by a distinctively granular structure, was relatively massive and appeared highly uniform on OPTV logs. However, it did occasionally contain isolated bubble clusters, particularly at depth. It was present in most rift boreholes, but generally decreased in representation westwards, away from the rift tip. The upper surface of the granular ice also commonly coincided with the level of the saline-water table (sea level) within the rift and the two were always observed to be in close proximity. This facies typically extended for some metres below sea level.

Marine ice

Progressing down-borehole, granular ice gradually gave way to a less massive and more strongly layered ice facies that was very similar in character to the marine ice imaged on the Amery Ice Shelf (Reference CravenCraven and others, 2005, Reference Craven, Allison, Fricker and Warner2009). This facies was present in all rift boreholes, either on its own or beneath the granular facies (and never above it), and showed an increased prevalence further west, away from the rift tip, as the thickness of the granular ice diminished. Indeed, in some of the most westerly boreholes (e.g. 08-R3), the marine ice facies extended the full thickness of the rift, cropping out at its upper surface (Fig. 5). Although this facies appeared to be homogeneous in OPTV images, containing no notable bubble-defined layering, it was characterized by a green hue, particularly under transmitted light near the surface. We interpreted this as due to the presence of a low concentration of chlorophyll-bearing marine algae, supported by occasional observations of dense patches of algae in core sections recovered from this facies. Such algae were not observed within the overlying granular ice. Although not clearly imaged by OPTV, core sections of marine ice did reveal the development of a strong sub-horizontal crystal alignment with depth, giving the facies a fissile texture.

Fig. 5. OPTV log of the full length of rift core 08-R3 with (progressing left to right) the raw OPTV image, the rolled OPTV image and annotations. Note that no solid core was retrieved from below 13.26m depth where unconsolidated platelet ice was encountered. Although not visible in the OPTV log, the ‘core base’ at 13.26m marks the point at which no more core could be recovered by mechanical coring. An annotated expansion (represented in three dimensions as a virtual core) of the unconsolidated platelet ice forming the lowermost part of this log is presented in Figure 8.

One further notable aspect of this facies is that it contained sinuous tubular channels, similar in appearance to large worm-holes (Fig. 6). These tubes were intersected by our cores on several occasions (e.g. 10-R3) and are typically 1–3cm in diameter and appear to have no preferential orientation. Unfortunately, no OPTV log was recovered from a borehole segment intersecting such a tube, principally because most of the rift holes became blocked with buoyant ice platelets before OPTV logging was possible. However, the tubes were observed directly in the recovered core sections (Fig. 6).

Fig. 6. Photographic image of a typical worm-hole-like tubular conduit located within core 10-R3. The core is retained within a wooden core holder and the tube extends approximately vertically along the top of the core. The tube is ~25mm in diameter.

Ice platelets

Towards the base of the rift cores, the marine ice became so fragile that it formed only a weakly consolidated mass of thin platy crystals (Fig. 7). Below this point, the crystals were effectively unconsolidated and samples could no longer be retrieved by traditional coring (since the retaining core dogs could no longer hold the unconsolidated slurry within the barrel), effectively forming a sea-water-saturated ‘mushy layer’ (Reference Feltham, Untersteiner, Wettlaufer and WorsterFeltham and others, 2006). This transition marked the indistinct interface between the base of the solid ice shelf and the platelet-rich uppermost layers of the underlying sea water. One OPTV log, recovered from 08-R3 (Fig. 5 and 8), did extend for ~4m below the point at which solid core was no longer retrievable, thereby presumably penetrating the uppermost layers of the platelet-rich cavity. This lowermost section of the OPTV log of 08-R3 revealed the presence of unconsolidated material that was characterized by small-scale sub-horizontal wavy layering (Fig. 8), strikingly similar in appearance to that imaged by directional video at the base of the Amery Ice Shelf (fig. 13 in Reference CravenCraven and others, 2005). These layers were repeated every few centimetres throughout the facies. Unfortunately, OPTV images could not be obtained from deeper into this facies because the buoyancy of the unconsolidated mass prevented further OPTV probe penetration.

Fig. 7. Photographic image of a sample of highly flaky marine ice just above the point at which it becomes completely unconsolidated and can no longer be retrieved by coring.

Fig. 8. Rolled OPTV virtual core image of a 1 m interval (15–16 m) near the base of core 08-R3 (Fig. 5): (a) actual OPTV image, (b) interpretative sketch. Brighter light reflected off repeated irregular sub-horizontal layering is interpreted as marking the boundary of layers of aggregated sub-ice-shelf platelets.

Interpretation

Ice-shelf boreholes

The ice-shelf cores (08-S1 and 10-S1) both began in surface snow. However, while the former terminated in firn, the latter (being >66m long) penetrated through the firn and into the underlying ice. Three specific characteristics of the OPTV images retrieved from 10-S1 were reported: (1) regular layering by dark bands, (2) intermittent layering by thicker dark bands and (3) a general down-core decrease in luminosity. We interpret the first of these, the ‘primary’ layering, as annual layers similar to those previously identified on the basis of directional video by for example Reference Hawley, Waddington, Alley and TaylorHawley and others (2003) and Reference Hawley and MorrisHawley and Morris (2006). In such logs, the darker zones mark the more melt-influenced icy layers formed during the summer, and the lighter zones the colder winter accumulation. The summer layer spacing of ~1.0m near the surface of 10-S1 accords with regional mass-balance approximations which indicate an accumulation of ~0.3mw.e. a–1 (Reference Van de Berg, Van den Broeke, Reijmer and Van MeijgaardVan de Berg and others, 2006). However, this primary layering was frequently disrupted by the second layer type, which was darker (indicating less reflected light, consistent with bubble-poor ice) and had sharper boundaries with the matrix material. These characteristics, along with the intermittent occurrence of this ‘secondary’ layering along the borehole, are consistent with an interpretation as refrozen surface melt layers. Although comparison with the spacing of annual layers (below) suggests that these melt events do not occur each summer, they do appear throughout the full borehole length. The presence of these secondary melt layers also makes it difficult to derive an age–depth relationship for 10-S1 by primary-layer counting. However, the age range of this borehole may be approximated by interpolating primary-layer spacing from zones that are devoid of melt layers (e.g. 5–9, 17–19, 22–25, 36–40, 50–51 and 56–60m in Fig. 3), suggesting that the record extends back for ~150 years from present. Although the frequent melt layers disrupt the core’s potential to provide an undisturbed palaeoenvironmental record, they do provide independent information on the scale and timing of major surface melting events and directly affect only a minor proportion of the core’s total length. Palaeoenvironmental reconstructions should therefore still be possible from cores such as this, as long as the physical influence of melting events is isolated and removed from the analysis. Finally, we interpret the general down-hole decrease in the luminosity of the OPTV image of 10-S1 (at a rate of 3.5 unitsm–1 depth, averaged linearly over the full 66m borehole length; Fig. 3) in terms of progressive firnification, specifically the gradual isolation and coalescence of bubbles resulting in a net increase in the optical transmissivity (and concomitant decrease in reflectivity) of the borehole wall.

Rift boreholes

The material imaged in the rift tip (08-T1) was similar to that forming the matrix of 10-S1. However, in contrast to the OPTV log of 10-S1, that of 08-T1 is uniform and includes only three slightly darker layers that are each only a few centimetres thick. Further, luminosity does not decrease measurably with depth along 08-T1. We interpret these properties, in association with the location of the borehole in the rift tip, as indicative of infilling by blown snow (as opposed to surface firnification on the ice shelf; see above). This process, described by Reference Leonard, Tremblay, MacAyeal and JacobsLeonard and others (2008) for a rift on the Ross Ice Shelf, would result in little or no seasonal signal, while the possible rapidity of aeolian infilling may also explain the absence of firnification-related bubble nucleation with depth.

Within the rift proper, we interpret the uppermost granular ice facies as snow and firn that have become saturated by percolating saline water, causing the observed grain rounding. This interpretation is also consistent with the general thinning of this facies westwards, away from the apex of the rift, where the rate of surface accumulation by snow trapping is expected to be lower. Progressing westwards and with depth into the base of the rift, this facies gives way to the marine ice facies. All of the properties of this facies, and in particular its occasional high algal content and gradual disintegration into unconsolidated platelets at the base of the rift boreholes, suggest formation by the progressive accumulation and compaction of buoyant platelets formed within the sub-ice-shelf cavity, consistent with previous interpretations. The fact that these platelets rose up the water column rapidly in completed boreholes, commonly preventing OPTV access within some minutes of drilling penetrating the cavity (08-R3 being the sole exception in this study), indicates that the platelets were both buoyant and mobile. The ubiquitous presence of this facies within our rift boreholes, typically to a thickness of some metres to tens of metres, also indicates that platelet marine ice formed throughout the rift.

Finally, the unique observations of worm-hole-like tubes within the granular ice and marine ice facies provide clear evidence of conduit-based water flow through the lowermost layers of the rift melange. We assume that these conduits are formed during the early stages of ice formation when the material is still erodible and then become frozen-in as the material consolidates and (possibly) de-waters. It is therefore apparent that this marine ice is highly porous and permeable, consistent with previous indications (e.g. Reference CravenCraven and others, 2005). One characteristic of marine ice that remains poorly understood is its very low measured bulk salinity (typically 0.05–0.5%; e.g. Reference Tison, Khazendar and RoulinTison and others, 2001) relative to that measured in sea ice (typically 1–20%; Reference WeeksWeeks, 2010), despite both ice types being formed by the aggregation and consolidation of frazil ice frozen from sea water. Reference Eicken, Oerter, Miller, Graf and KipfstuhlEicken and others (1994) argued that the standard mechanisms of post-formational desalination proposed for sea ice are in fact insufficiently effective to reduce the salinity of marine ice to measured values. Instead, these authors tentatively invoked a mechanism of salt-water expulsion from already low-salinity platelets during buoyancy-driven aggregation and densification. Reference TabrahamTabraham (1998) introduced the ‘mushy layer’ concept into a solidification model for marine ice. In this approach, relatively recently proposed to describe the desalination process in sea ice, convective movements in the interstitial liquid are driven by density instabilities due to salinity gradients in a temperature field increasing downwards. This leads to the development of convective ‘chimneys’ known as ‘brine channels’ in sea ice, exporting salts from the mushy layer to the ocean below. However, Reference TabrahamTabraham (1998) also recognized that, although the model of drainage through channels produced some desalination in marine ice, the amount of desalination was found to be less than the levels observed within actual marine ice, the main problem being shutdown of the flow with continuing solidification. The author suggested that combining mushy-layer desalination with compaction might be sufficiently efficient to reach the observed low salinity values. Alternatively, Reference Tison, Khazendar and RoulinTison and others (2001) showed that by treating marine ice as a two-phase compound (pure frazil ice crystals in a consolidating interstitial fluid) and applying a boundary-layer model for consolidation of the interstitial liquid, marine ice salinities could be reproduced if fractionation coefficients derived from the solidification of freshwater ice were used rather than those for columnar (dendritic skeletal layer) sea-water ice.

The 0.05–0.5% salinity range discussed above has generally been observed in thick (102–103 m) marine ice layers, and to the best of our knowledge no internal desalination chimneys (either active or relict) have been described in such layers. The marine ice salinity range in our RBIS dataset covers a range more typical of sea ice (<9% in the lower layers), with very low salinities (0.1%) only being measured in the upper few metres over a total thickness of a maximum of 10–20m (Pattyn and others, unpublished information). The occurrence of the wormhole-like tubes in the less consolidated lower layers could therefore represent the signature of mushy-layer-like convection processes in the early stages of consolidation of the marine ice layer. The fact that these tubes lack the typical vertical tree-like structure of sea-ice brine channels might reflect the geometrical control of the sub-horizontal accumulation pattern of the loose large frazil ice platelets. An alternative, or supplementary, hypothesis is that once the marine ice layer is formed, salt would continue to be expelled from the layer by freezing-front rejection accompanying ongoing recrystallization within the layer. The removal of that salt-rich water through an effective internal drainage system would then decrease the bulk salinity of the remaining marine ice. Such a process would also involve the delivery of relatively high-salinity water to the underlying water column.

Summary and Discussion

OPTV logging of 13 boreholes, supplemented by visual analysis of their associated cores, from within and around a rift on the seaward edge of the RBIS has revealed the presence and stratigraphy of several distinctive material facies. OPTV has the capacity to image these material types along with their internal variability, such as that associated with annual layering in snow, firn and ice. The technique may also have the capacity to provide a rapid borehole-based approximation of firn/ice reflectivity and therefore, indirectly, density. Importantly, the technique also has the capacity to image the immediate sub-ice-shelf cavity which may otherwise be extremely difficult to investigate.

Beyond technique evaluation, this study has resulted in the following glaciological findings and associated implications:

  1. 1. That annual layering is present at least in the uppermost layers of the ice shelf (at least for 66 m) and that this depth covers a time range of ~150 years. As anticipated, layer spacing decreases with depth.

  2. 2. That surface accumulation has been, for the full length of the record, interrupted by frequent episodes of summer melting. These events have commonly resulted in the formation of ice layers that are several centimetres thick and introduce additional complications in terms of obtaining continuous undisturbed palaeoclimatic records from such cores. Nonetheless, such cores may well be used to provide detailed palaeoclimatic information as long as the firn and ice influenced by the melt layers is excluded from the analysis. OPTV logging can assist in this.

  3. 3. That the OPTV logs of ice-shelf snow and firn darken with depth as bubble nucleation causes the reflectance of these materials to decrease. It is therefore possible that borehole-based OPTV luminosity could provide a proxy for the near-surface density of continental snow and ice.

  4. 4. That the material filling in the rift tip is blown snow that has been deposited rapidly and which shows very little variation in internal structure.

  5. 5. That the melange forming the floor of the rift is composed of distinctive material facies in the following stratigraphic arrangement: surface snow overlies granular ice overlies marine ice overlies unconsolidated platelets. The first two of these facies become less prevalent moving away from the rift tip, such that only marine ice and unconsolidated platelets were present in the westernmost boreholes. We hypothesize that the granular ice forms by the saturation of snow/firn by percolating sea water, while the underlying marine ice forms by the accumulation of buoyant platelets at the base of the solid ice shelf, consistent with previous investigations.

  6. 6. That marine ice contains organic matter, presumably of marine origin, giving it a distinctive green hue in OPTV images. Towards its base, marine ice also becomes mushy and is increasingly penetrated by tubular conduits, making the layer highly permeable.

  7. 7. That platelet ice is present ubiquitously in thicknesses of at least several metres beneath the rift. These platelets consolidate at the rift base as irregular sub-horizontal layers, but individual crystals appear to be both mobile and buoyant.

These findings and implications are based on OPTV and visual analysis alone and are therefore tentative. Future efforts will focus on direct core sampling in order to evaluate these interpretations by rigorous multi-parameter analysis. Nonetheless it is clear from this research that OPTV-based borehole analysis has a significant contribution to make to the investigation of ice-shelf properties. In particular, the reconstruction of internal layering, which may not always be readily achievable from core analysis, has potential implications for topics such as the interpretation of internal reflecting horizons revealed by ice radar and as a check on core-derived palaeoclimatic reconstructions. Finally, the technique may represent the principal analytical tool in borehole sections from which core segments are missing or broken and in boreholes drilled by steam or hot water from which no ice core may be recovered.

Acknowledgements

This paper forms a contribution to the Belgian Research Programme on the Antarctic (Belgian Federal Science Policy Office), project No. EA/11/3A ‘Belgian Ice Sheet Shelf Ice Measurements in Antarctica (BELISSIMA)’ and to UK Royal Society grant RG1430. B.H. was also supported by the Climate Change Consortium of Wales (C3W). We thank the International Polar Foundation for Antarctic for support, and A. Hubert, R. Wagemans and K. Soete for invaluable assistance in the field. We also thank two anonymous reviewers and the scientific editor, Helen Fricker, for comments that led to the improvement of the manuscript.

References

Craven, M and 6 others (2004) Initial borehole results from the Amery Ice Shelf hot-water drilling project. Ann. Glaciol., 39, 531–539 (doi: 10.3189/172756404781814311)Google Scholar
Craven, M and 7 others (2005) Borehole imagery of meteoric and marine ice layers in the Amery Ice Shelf, East Antarctica. J. Glaciol., 51(172), 75–84 (doi: 10.3189/172756505781829511)Google Scholar
Craven, M, Allison, I, Fricker, HA and Warner, R (2009) Properties of a marine ice layer under the Amery Ice Shelf, East Antarctica. J. Glaciol., 55(192), 717–728 (doi: 10.3189/002214309789470941)CrossRefGoogle Scholar
Eicken, H, Oerter, H, Miller, H, Graf, W and Kipfstuhl, J (1994) Textural characteristics and impurity content of meteoric and marine ice in the Ronne Ice Shelf, Antarctica. J. Glaciol., 40(135), 386–398 Google Scholar
Engelhardt, H and Determann, J (1987) Borehole evidence for a thick layer of basal ice in the central Ronne Ice Shelf. Nature, 327(6120), 318–319 Google Scholar
Feltham, DL, Untersteiner, N, Wettlaufer, JS and Worster, MG (2006) Sea ice is a mushy layer. Geophys. Res. Lett., 33(14), L14501 (doi: 10.1029/2006GL026290)Google Scholar
Fricker, HA, Popov, S, Allison, I and Young, N (2001) Distribution of marine ice under the Amery Ice Shelf, East Antarctica. Geophys. Res. Lett., 28(11), 2241–2244 (doi: 10.1029/2000GL012461)CrossRefGoogle Scholar
Fricker, HA, Bassis, JN, Minster, B and MacAyeal, DR (2005) ICESat’s new perspective on ice shelf rifts: the vertical dimension. Geophys. Res. Lett., 32(23), L23S08 (doi: 10.1029/2005GL025070)CrossRefGoogle Scholar
Glasser, NF and Scambos, TA (2008) A structural glaciological analysis of the 2002 Larsen B ice-shelf collapse. J. Glaciol., 54(184), 3–16 (doi: 10.3189/002214308784409017)Google Scholar
Glasser, N and 7 others (2009) Surface structure and stability of the Larsen C ice shelf, Antarctic Peninsula. J. Glaciol., 55(191), 400–410 (doi: 10.3189/002214309788816597)CrossRefGoogle Scholar
Hawley, RL and Morris, EM (2006) Borehole optical stratigraphy and neutron-scattering density measurements at Summit, Greenland. J. Glaciol., 52(179), 491–496 (doi: 10.3189/172756506781828368)Google Scholar
Hawley, RL, Waddington, ED, Alley, RA and Taylor, KC (2003) Annual layers in polar firn detected by borehole optical stratigraphy. Geophys. Res. Lett., 30(15), 1788 (doi: 10.1029/2003GL017675)Google Scholar
Holland, PR, Corr, HFJ, Vaughan, DG, Jenkins, A and Skvarca, P (2009) Marine ice in Larsen Ice Shelf. Geophys. Res. Lett., 36(11), L11604 (doi: 10.1029/2009GL038162)Google Scholar
Hubbard, B, Roberson, S, Samyn, D and Merton-Lyn, D (2008) Digital optical televiewing of ice boreholes. J. Glaciol., 54(188), 823–830 (doi: 10.3189/002214308787779988)CrossRefGoogle Scholar
Jenkins, A and 6 others (2010) Observations beneath Pine Island Glacier in West Antarctica and implications for its retreat. Nature Geosci., 3(7), 468–472 (doi: 10.1038/ngeo890)Google Scholar
Khazendar, A and Jenkins, A (2003) A model of marine ice formation within Antarctic ice shelf rifts. J. Geophys. Res., 108(C7), 3235 (doi: 10.1029/2002JC001673)Google Scholar
Khazendar, A, Tison, JL, Stenni, B, Dini, M and Bondesan, A (2001) Significant marine-ice accumulation in the ablation zone beneath an Antarctic ice shelf. J. Glaciol., 47(158), 359–368 (doi: 10.3189/172756501781832160)Google Scholar
Khazendar, A, Rignot, E and Larour, E (2007) Larsen B Ice Shelf rheology preceding its disintegration inferred by a control method. Geophys. Res. Lett., 34(19), L19503 (doi: 10.1029/2007GL030980)Google Scholar
Leonard, KC, Tremblay, L-B, MacAyeal, DR and Jacobs, SS (2008) Interactions of wind-transported snow with a rift in the Ross Ice Shelf, Antarctica. Geophys. Res. Lett., 35(5), L05501 (doi: 10.1029/2007GL033005.)Google Scholar
Morgan, VI (1972) Oxygen isotope evidence for bottom freezing on the Amery Ice Shelf. Nature, 238(5364), 393–394 Google Scholar
Oerter, H and 6 others (1992) Evidence for basal marine ice in the Filchner–Ronne Ice Shelf. Nature, 358(6385), 399–401 Google Scholar
Pattyn, F, de Brabander, S and Huyghe, A (2005) Basal and thermal control mechanisms of the Ragnhild Glaciers, East Antarctica. Ann. Glaciol., 40, 225–231 (doi: 10.3189/172756405781813672)Google Scholar
Roberson, S and Hubbard, B (2010) Application of borehole optical televiewing to investigating the 3-D structure of glaciers: implications for the formation of longitudinal debris ridges, Midre Lovénbreen, Svalbard. J. Glaciol., 56(195), 143–156 (doi: 10.3189/002214310791190802)Google Scholar
Roberts, D, Craven, M, Cai M-H, Allison, I and Nash, G (2007) Protists in the marine ice of the Amery Ice Shelf, East Antarctica. Polar Biol., 30(2), 143–153 (doi: 10.1007/s00300-006-0169-7)Google Scholar
Shabtaie, S and Bentley, CR (1982) Tabular icebergs: implications from geophysical studies of ice shelves. J. Glaciol., 28(100), 413–430 Google Scholar
Tabraham, J (1998) The desalination of marine ice. (PhD thesis, University of Cambridge)Google Scholar
Tison, J-L, Ronveaux, D and Lorrain, RD (1993) Low salinity frazil ice generation at the base of a small Antarctic ice shelf. Antarct. Sci., 5(3), 309–322 Google Scholar
Tison, JL, Khazendar, A and Roulin, E (2001) A two-phase approach to the simulation of the combined isotope/salinity signal of marine ice. J. Geophys. Res., 106(C12), 31 387–31 401 (doi: 10.1029/2000JC000207)Google Scholar
Treverrow, A, Warner, RC, Budd, WF and Craven, M (2010) Meteoric and marine ice crystal orientation fabrics from the Amery Ice Shelf, East Antarctica. J. Glaciol., 56(199), 877–890 (doi: 10.3189/002214310794457353)CrossRefGoogle Scholar
Van de Berg, WJ, Van den Broeke, MR, Reijmer, CH and Van Meijgaard, E (2006) Reassessment of the Antarctic surface mass balance using calibrated output of a regional atmospheric climate model. J. Geophys. Res., 111(D11), D11104 (doi: 10.1029/2005JD006495)Google Scholar
Weeks, WF (2010) On sea ice. University of Alaska Press, Fairbanks, AK Google Scholar
Figure 0

Fig. 1. Illustration of the principles of OPTV operation. (a) Image of OPTV probe and (b) expanded sketch of probe head, (c) schematic illustration of a borehole intersecting three closely spaced layers dipping west and (d) illustration of their equivalent sinusoids on the raw OPTV image.

Figure 1

Table 1. Summary data for boreholes cored on the RBIS in 2008 and 2010

Figure 2

Fig. 2. Location map of (a) the general study site on the Roi Baudouin Ice Shelf (PES is Princess Elisabeth Station) and (b) the individual boreholes reported herein. Boreholes logged by OPTV are represented as open circles.

Figure 3

Fig. 3. OPTV log of the full length of ice-shelf core 10-S1. The raw OPTV image is plotted on the left-hand side of each panel and its rolled equivalent is plotted on the right. The luminosity trace overlaid on the raw OPTV image is sampled each millimetre in the vertical and is scaled to decrease, over the range 450–100 (non-dimensioned) units, to the right.

Figure 4

Fig. 4. Expanded rolled OPTV images of two 1 m long virtual core segments from ice-shelf core 10-S1 (Fig. 3): (a) 30–31m depth and (b) 51.5–52.5m depth.

Figure 5

Fig. 5. OPTV log of the full length of rift core 08-R3 with (progressing left to right) the raw OPTV image, the rolled OPTV image and annotations. Note that no solid core was retrieved from below 13.26m depth where unconsolidated platelet ice was encountered. Although not visible in the OPTV log, the ‘core base’ at 13.26m marks the point at which no more core could be recovered by mechanical coring. An annotated expansion (represented in three dimensions as a virtual core) of the unconsolidated platelet ice forming the lowermost part of this log is presented in Figure 8.

Figure 6

Fig. 6. Photographic image of a typical worm-hole-like tubular conduit located within core 10-R3. The core is retained within a wooden core holder and the tube extends approximately vertically along the top of the core. The tube is ~25mm in diameter.

Figure 7

Fig. 7. Photographic image of a sample of highly flaky marine ice just above the point at which it becomes completely unconsolidated and can no longer be retrieved by coring.

Figure 8

Fig. 8. Rolled OPTV virtual core image of a 1 m interval (15–16 m) near the base of core 08-R3 (Fig. 5): (a) actual OPTV image, (b) interpretative sketch. Brighter light reflected off repeated irregular sub-horizontal layering is interpreted as marking the boundary of layers of aggregated sub-ice-shelf platelets.