LiNi0.5Mn1.5O4 cathode material, which has a higher working voltage (4.7 v) than NCM and a moderate specific capacity (148 mAh/g theoretical), has been studied to understand the source of capacity fade during the first 100 cycles in a half cell. The work mainly consisted of high resolution TEM observations and analysis of the surface microstructural properties, before and after cycling. We found that the pristine material consisted almost entirely of large FCC spinal domains but with cycling appears small simple cubic spinel domains at the surface. It is proposed that these small changes of the surface microstructure leads to impedance rise that results in the premature arrival to the upper cutoff voltage of 4.85V during charging and the subsequent loss of capacity with cycling.

Herein we describe a technique for preparing samples from cycled Li-ion batteries with minimal contact with atmospheric water for examination by TEM and to provide the results of an analysis of the SEI in Li-ion cells. The electrode samples were prepared in a glove box by manipulation with a diamond tipped pen to carefully dislodge particles directly onto the TEM sample holder. Electrodes were extracted from Li-ion cells that contained a cathode of high capacity, manganese rich NCM (HCMR-NCM). Nanometer-sized MnF2 crystal particles embed themselves in the SEI layer of the anodes as observed and confirmed by HRTEM lattice image analysis and EELS. Cross-sections of the SEI layer reveal that the thickness of the SEI and propensity for MnF2 crystal deposition is non-uniform.

This study aims to create controlled fine space by electrospinning, and to develop the electrode materials for high-performance energy devices. With the popularization of mobile devices, household appliances, hybrid vehicles, electric vehicles, and the like, the use of power storage devices is expanding, and further performance improvements are required. In this study, a novel electrode material was developed by compositing Si with carbon nanofibers derived from polyacrylonitrile (PAN) by electrospinning and heat treatment. The texture and structure of the nanofibers were observed and analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and transmission electron microscopy (TEM) combined with image processing. Nano spaces were created in the CNFs and Si particles were able to be contained in the CNFs. In the second and subsequent cycles of the charge/discharge experiments of lithium ion battery (LIB) electrode made from the materials, the capacity was more than twice the theoretical capacity using graphite, and good cycle performance was obtained.

This study compares the physico- and electro- chemical properties of LiNi0.8Mn0.10Co0.1O2 (NMC811) and LiNi0.83Mn0.06Co0.09Al0.1O2 (NMCA) prepared by an oxalic acid co-precipitation. Deposition of a SiO2 surface coating was attempted via reaction of the powder with an amino silane prior to the final heat treatment. It was found that either the presence of small amounts of Al3+, or the compositional gradient resulting from a two step co-precipitation, caused increased crystal growth of the NMCA in comparison to NMC811. This led to improved cyclability in LP40 electrolyte. However, the SiO2 coating appeared incomplete and negatively impacted performance. Crystal cleavage preferably on the {001} planes was observed after 100 charge-discharge cycles, with consequent cathode electrolyte interphase formation in the crystal cracks. This is believed to cause capacity decay via lithium loss, and increased charge transfer resistance. An FEC based electrolyte improved the cyclability in all cases and even under extreme conditions (45°C and upper cycling potential of 4.5 V) NMCA showed a capacity retention of 85% after 100 cycles.

Eumelanin is a redox active, quinone-based biopigment, featuring a broad band absorption in the UV-Vis region. The combination of the redox and optical properties makes eumelanin an interesting candidate to explore light-assisted storage technologies. Electrodes of melanin on indium tin oxide (ITO) current collectors were investigated for their morphological and voltammetric characteristics in aqueous electrolytes. Under solar light, we observed that the capacity and the capacitance of the melanin electrodes significantly increase with respect to the dark conditions (by 63% and 73%, respectively).

A perfluorinated ionic liquid, 1-(perfluorohexyl)-3-methylimidazolium iodide, was synthesized via microwave reaction and compared to a non-fluorinated analog. Typically, the synthesis of fluorinated ionic liquids involves long reaction times and multiple steps. We have demonstrated a shortened synthesis and a more straightforward procedure, by using a microwave reactor for the microwave-assisted synthesis of 1-(perfluorohexyl)-3-methylimidazolium iodide. The addition of fluorinated alkyl chains on imidazolium ionic liquid cations increases the molecular free volume of the ionic liquid which is beneficial for increasing CO2 physisorption. Computational and experimental data shows an increased CO2 solubility and capacity for fluorinated ionic liquids. The perfluoroalkyl functionalized ionic liquid is characterized using 1H and 19F NMR spectroscopy, FTIR spectroscopy, and DSC. By DSC, a crystallization onset is near -31 °C and while the onset of the melting point between -30 and -17 °C.

We divide the corrosion products on ancient bronzes into two categories, i.e., "inward growth" and “outward growth” corrosions. Several selected Chinese ancient bronzes with the "inward growth” corrosion are studied; and their chemical compositions, microstructures and morphologies are characterized systematically. According to the results, it is found that the “inward growth” corrosion can be further divided into three types, i.e., "noble patina", "noble-like patina" and "lamellar peeling patina". We propose that the growth mechanism of the “inward growth” corrosion is that the corrosion initiates at and develops along α-Cu phase. Furthermore, the effect of alloy Sn content on the “inward growth” corrosion is also studied.

We investigate, from first principles, the electrochemical sodiation mechanism of rutile-type vanadium dioxide as a possible electrode material for sodium-ion batteries. The computed voltages versus sodium metal are low in comparison to current state-of-the-art sodium-ion battery cathodes, which we can relate to the large space demand of sodium ions in the compact rutile structure and the resulting severe lattice deformations compared to other working metals. Due to the same reason large anisotropic unit cell volume changes are predicted during cycling. We furthermore find a change of the preferred reaction mechanism during discharge, with a switching between insertion- and conversion-type reaction at higher degrees of sodiation. The predicted capacities on the other hand are appreciable, making a further consideration of this material as high-potential anode in combination with sodium working metal interesting.

Sarin gas is a dangerous chemical warfare agent (CWA). It is a nerve agent capable of bringing a person to death in about 15 minutes. A lethal concentration of sarin molecules in air is about 30 mg/m3. Experimental research on this gas requires very careful safety protocols for handling and storage. Therefore, theoretical and computational studies on sarin gas are very welcome and might provide important safe guides towards the management of this lethal substance. In this work, we investigated the interactions between sarin, air and nanoporous graphene, using tools of classical molecular dynamics simulations. Aiming to cast some light in the possible sarin selective filtration by graphene, we designed a bipartite simulation box with a porous graphene nanosheet placed at the middle. Sarin and air molecules were initially placed only on one side of the box so as to create an initial pressure towards the passage of both to the other side. The box dimensions were chosen so that the hole in the graphene was the only possible way through which sarin and air molecules can get to the other side of the box. The number of molecules that passed through the hole in graphene was monitored during 10 ns of simulation and the results for different temperatures were compared. The results show that, as far as the size of the holes are small, van der Waals forces between graphene and the molecules play a significant role on keeping sarin near graphene, at room temperature.

Betavoltaics (BV) cells (or nuclear batteries) have long-lasting power and high volumetric energy densities that open a broad range of applications that are not currently available, especially in low-power electronics for the internet-of-things, internal medical devices, and harsh environments. The introduction of very low-power electronics has opened up a market for the wide and accepted use of BV cells. As BVs have potentially decades-long useful lifetimes and are anticipated to be used in harsh environments, a method to describe accelerated contact aging has been developed. Monte Carlo radiation simulations show that energy can be deposited in the interface 10-50 times faster than real-world applications. The models can be used to design contact aging experiments for BV cell deployments.

We report a facile method to fabricate CuNi nano-octahedra and nanocubes using a colloidal synthesis approach. The CuNi nanocrystals terminated with exclusive crystallographic facets were controlled and achieved by a group of synergetic capping ligands in a hot solution system. Specifically, the growth of {111}-bounded CuNi nano-octahedra is derived by a thermodynamic control, whereas the generation of {100}-terminated CuNi nanocubes is steered by a kinetic capping of chloride. Using a reduction of 4-nitrophenol with sodium borohydride as a model reaction, CuNi nano-octahedra and nanocubes demonstrated a strong facet-dependence due to their different surface energies although both exhibited remarkable catalytic activity with the high rate constant over mass (k/m). A kinetic study indicated that this is a pseudo first-order reaction with an excess of sodium borohydride. CuNi nanocubes as the catalysts showed better catalytic performance (k/m = 385 s-1•g-1) than the CuNi nano-octahedra (k/m = 120 s-1•g-1), indicating that 4-nitrophenol and hydrogen were adsorbed on the {100} facets with their molecules parallel to the surface much easier than those on {111} facets.