Hostname: page-component-7479d7b7d-k7p5g Total loading time: 0 Render date: 2024-07-08T10:58:04.290Z Has data issue: false hasContentIssue false

Dynamic Behaviour of Dislocations in HF-Doped Ice Ih

Published online by Cambridge University Press:  20 January 2017

J. Perez
Affiliation:
Groupe d’Études de Métallurgie Physique et de Physique des Matériaux, E.R.A. no. 463, Institut National des Sciences Appliquées de Lyon, Bât. 502, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex, France
C. Maï
Affiliation:
Groupe d’Études de Métallurgie Physique et de Physique des Matériaux, E.R.A. no. 463, Institut National des Sciences Appliquées de Lyon, Bât. 502, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex, France
J. Tatibouët
Affiliation:
Groupe d’Études de Métallurgie Physique et de Physique des Matériaux, E.R.A. no. 463, Institut National des Sciences Appliquées de Lyon, Bât. 502, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex, France
R. Vassoille
Affiliation:
Groupe d’Études de Métallurgie Physique et de Physique des Matériaux, E.R.A. no. 463, Institut National des Sciences Appliquées de Lyon, Bât. 502, 20 avenue Albert Einstein, 69621 Villeurbanne Cedex, France
Rights & Permissions [Opens in a new window]

Abstract

A model of dislocation glide in ice Ih was recently proposed. This model was developed on certain assumptions, namely that transitions occur through cooperative movements of H2O molecules in the non-crystalline core of dislocations. A relation between the velocity vd of linear defects and shear stress τ or temperature T is obtained. This relation shows that vd varies linearly with τ at low values of τ and (or) T but varies more rapidly at higher stresses; this non-linearity is more pronounced the higher the temperature. Such an analysis is extended in order to take into account doping effects. The case of HF-doped ice is considered: it is shown that there is a strong accumulation effect of HF molecules in the dislocation cores, which induces an increase of the rate of transitions. The results are in agreement with experimental data concerning both the velocity of dislocations and high-temperature internal friction in HF-doped ice.

Résumé

Résumé

Un modèle de glissement des dislocations dans la glace Ih a été proposé récemment à partir des deux hypothèses suivantes: Les dislocations présentent un coeur étendu de matière non cristalline. Des transitions entre différentes configurations se produisent grâce à des mouvements coopératifs de molécules d’eau. Une relation entre la vitesse vd des dislocations, la contrainte τ et la température T, a été obtenue; celle-ci montre que vd varie linéairement avec τ aux faibles valeurs de τ et (ou) de T. Cette variation est plus rapide aux fortes contraintes et la non linéarité est d’autant plus importante que la température est élevée. Cette description a été développée de façon à rendre compte des effets dus au dopage. Le cas de la glace dopée à HF est étudié: un effet de ségrégation des molécules HF dans le coeur des dislocations pourrait provoquer un accroissement de la vitesse de transition. Une telle analyse est en accord avec les données expérimentales concernant tout aussi bien la vitesse des dislocations que le frottement intérieur haute température mesurés dans le cas de glace dopée à l’acide fluorhydrique.

Zusammenfassung

Zusammenfassung

Für das Gleiten längs Versetzungen in Ih-Eis wurde jüngst ein Modell entwickelt. Dieses Modell beruhte auf gewissen Annahmen, nämlich dass Übergänge durch kooperative Bewegungen von H2O–Molekülen im Kern der Versetzungen auftreten. Zwischen der Geschwindigkeit vd linearer Defekte und der Scherspannung τ oder Temperature T besteht eine Beziehung. Diese Beziehung zeigt, dass vd bei kleinen werten von τ und (oder) T sich mit τ linear verändert, jedoch schneller bei höheren Spannungen; diese Nichtlinearität ist umso ausgesprochener, je höher die Temperatur ist. Eine derartige Analyse wird auf den Fall von Verunreinigungs-effekten erweitert, hier auf die Verunreinigung mit HF (Fluorwasserstoff). Es zeigt sich, dass sich eine starke Akkumulation von HF-Molekülen in den Versetzungskernen einstellt, die ein Anwachsen der Über-gangsrate bewirkt. Die Ergebnisse passen gut zu experimentellen Daten, sowohl hinsichtlich der Versetzungs-geschwindigkeit wie der inneren Reibung bei hoher Temperatur in HF-verunreinigtem Eis.

Type
Research Article
Copyright
Copyright © International Glaciological Society 1980

1. Introduction

In a previous paper (Reference PerezPerez and others, 1978) a new model describing the dynamic behaviour of dislocations in ice was proposed. This model was developed making certain assumptions:

  • (i) Dislocations have a non-crystalline extended core: the free energy of an ice crystal containing a dislocation of unit length is lowered by a value of ΔG when a non-crystalline arrangement of H2O molecules can exist around the dislocation line, resulting in core energy and elastic energy being suppressed; the dimensions r * of this non-crystalline molecular arrangement is limited by the increase of entropy of configuration and by the energy of the interface between crystalline and non-crystalline domains. This description is very similar to the concept of “heterophase dislocations” developed by Reference Glicksman and VoldGlicksman and Vold (1972).

  • (ii) Rearrangements of H2O molecules in the core of dislocations occur through configurational modes of excitation. The mean time τ 1 for a molecule to rearrange is dependent on fluctuations in the concentration of broken bonds C and can be taken equal to (Reference AngellAngel, 1971)

    (1)

    Assuming a linear distribution of the number of bonds in terms of their energy, it was found that

    where E is the difference between the most probable potential energy of bonds in the non-crystalline core and that corresponding to the broken bonds, γ is a numerical factor equal to π 2/6 when E > kT and about
    when E is between 0. 10 and 0.15 eV.
  • (iii) H2O molecules may be constantly exchanging between the crystalline and noncrystalline regions; when no stress is applied the mean position of dislocations does not vary, but when a stress τ is applied, there is a transformation into non-crystalline ahead of the dislocation and “recrystallization” behind it through thermal fluctuations. Then the dislocations can glide after active configurations corresponding to a saddle-point are obtained through the correlated movement of n H2O molecules. Since the loose structure of ice implies a small value of the correlation length, the frequency of formation of such activated configuration can be given by

    where v a is the activation volume.

    By considering simplified geometrical situations, the preceding assumptions have lead the authors to the following expression for dislocation velocity in ice.

    (2)
    where b is the Burgers’ vector, G the shear modulus, and τ 0 ≈ 10–13 s; τ 0 can be identified either with the mean time for a molecule to be displaced with the velocity of sound within one molecular distance or to the reverse of the most probable frequency of translational modes of vibration as indicated by spectroscopy.

(Equation 2) has been used to fit experimental results obtained by X-ray topography (Reference MaïMaï, 1976), taking properly into account the variation of v d with stress, which is the more non-linear the higher the temperature.

New experimental results about dynamic behaviour of dislocations have been obtained in the case of HF-doped ice: on the one hand Reference MaïMaï and others (1978) have shown that HF induces a slight increase of the velocity of dislocations and moreover this velocity varies more rapidly with stress; on the other hand, the high-temperature internal friction of ice, which was interpreted in terms of movement of linear defects, is increased after HF doping and becomes more amplitude dependent (Reference VassoilleVassoille and others, 1978).

The aim of this paper is to present an improvement of the preceding model in order to account for those recent experimental results on dislocation velocity of HF-doped ice single crystals.

In the first part, the most typical experimental results are presented: it is noteworthy that both techniques (direct X-ray topographic observations and internal-friction measurements) lead us to very analogous results. In the second part, a simplified analysis of the effect of the substitutional impurities is introduced. Finally, all the experimental results are discussed in the light of the whole model; the high-temperature internal friction is particularly considered.

2. Experimental results

2.1 Experimental procedure

Specimens in the form of bars of rectangular section (8 mm × 2 mm) are mechanically cut from a single-crystal block freshly grown by the Bridgman method. The diffusion coefficient of hydrogen fluoride in ice being very high (Reference FletcherFletcher, 1970, p. 137) this property is used for doping the specimens by covering them over with an HF solution. The HF concentration is estimated from the electrical resistivity of the melted specimen after measurement. Moreover, the displacement of the relaxation peak (Reference VassoilleVassoille and others, 1977) confirms the result.

The rectangular bar is cut in two parts:

  • (i) One part is about 20 mm long and is fixed on the goniometer of a Lang camera. Before each series of measurements of dislocation velocity, the crystallographic orientation of the specimen is determined and a topographic observation of the whole crystal is done. Then, a section of this crystal is chosen in order to observe the displacement of dislocations induced by a comprcssional stress applied by putting a load on the crystal. This displacement is measured by the double-images technique showing the position of the dislocations both before and after the application of the load. The whole Lang assembly is put in a box where the temperature is controlled between 250 and 272 K.

  • (ii) The second part, about 80 mm long, is mounted in an inverted torsional pendulum. The variations of the logarithmic decay of oscillations with temperature is automatically provided (Reference EtienneEtienne and others, 1975); the amplitude of oscillations is variable, thus measurements of internal friction as a function of strain amplitude are possible.

Hence, both measurements (dislocation velocity and internal friction) are made on the same material.

2.2 Results on dislocation velocity

Experimental points (Reference MaïMaï and others, 1978) shown in Figure 1(b) exhibit, in the case of HF doped ice, a non-linear relation between velocity and stress in the whole temperature range 251–270 K. It must be recalled (Reference MaïMaï, 1976) that with the same ice before doping, this non-linear relation is observed only above 260 K (Fig. 1(a)).

Fig. 1. Experimental points and theoretical curves giving the dislocation velocity in pure ice (a) and HF-doped ice (b).

Furthermore HF induces an increase of the velocity of dislocations which is about twice that before doping.

2.3 Results on internal friction

When ice is doped with HF, the relaxation peak is observed at lower temperature than in case of pure ice (Fig. 2) indicating that the relaxation time is 70 times shorter. The HF content, which is supposed to be in substitutional solution, is then between 10 and 20 p.p.m. (Reference VassoilleVassoille and others, 1977).

Fig. 2. Internal friction versus temperature before HF doping (dashed line) and after doping for five different specimens (curves 1 to 5).

The high-temperature internal friction is clearly modified: it is increased (Fig. 2) and also it becomes more amplitude dependent (Fig. 3). Furthermore, the amplitude dependence appears at lower temperatures than in the case of pure ice.

Fig. 3. Internal friction versus strain amplitude before (a) and after (b) HF doping.

It is noteworthy that the curves of Figure 3 are correlated with those of Figure 1; indeed, as the high-temperature internal friction is interpreted in terms of movement of linear defects, only a non-linear relation between velocity and stress can induce an amplitude-dependent internal friction.

3. Discussion

3.1 Effect of a substitutional doping agent on dislocation velocity in ice

In an ice crystal we write [I]C for the molar fraction of a substitutional impurity and [I]NC for the molar fraction of the same impurity in the extended cores of dislocations. The chemical potential of this impurity has to have the same value in the two phases; hence

where [I]C max and [I]NC max are the maximum values of the impurity concentration in the crystalline and non-crystalline part respectively.

The partition coefficient is introduced as Ks = [I]NC max /[I]C max .

Therefore

It is necessary to estimate a value of K S in order to calculate the contribution ΔG(I), due to the impurity atoms, to the total variation of the free enthalpy induced by the extension of the dislocation core by one unit length in an ice crystal containing a concentration [I]C of dopant. [I ]C max can be obtained from the liquidus line of the equilibrium phase diagram of ice and impurity. [I]NC max corresponds to the maximum value of the concentration when the core begins to melt; in fact, melting is only possible when there is an equilibrium between the increase in interfacial energy and the decrease in configurational energy. The approximation of linearized free-enthalpy–temperature curves is used once more and Figure 4 shows that this melting occurs at a temperature T in a material having a concentration of impurity [I]NC max ; this temperature is between T F and T F′ (T F′ being the temperature at which a bulk mixture of ice and impurity of the same composition would begin to melt), as indicated in Figure 4 and by the relation

(3)

where Δγ is the increase of interfacial energy when the interface between crystal- and non-crystalline core is transformed into an interface between crystal and liquid, ΔS 0 is the melting entropy of the mixture of water and impurity (it is assumed that ΔS 0 is of the order of magnitude of the melting entropy of ice).

Fig. 4. Linearized approximation of the variation of the free enthalpy with temperature in the case of liquid water, ice, and non-crystalline core phase.

Equation (3) can be written

(4)

Then from the equilibrium phase diagram, it is easy to obtain [I]NC max corresponding to each value of (T FT F′) determined as a function of the temperature T using Equation (4).

At this stage an attempt can be made to apply this result to the case of ice doped with HF. In Figure 5, the liquidus line is shown and the solidus line is drawn with the points which correspond to a maximum content of HF in ice as determined by Reference Haltenorth and KlingerHaltenorth and Klinger (1977). (It has been assumed that HF forms mainly a substitutional solution.) In the range 240–270 K, the values of [HF]C max , [HF]NC max and K s are calculated from data in Figure 5 and Equation (4); these values are given in Table I.

Table I. Values of parameters for HF-doped ice

Fig. 5. Phase diagram HF-H20; experimental points are given by Reference Haltenorth and KlingerHaltenorth and Klinger (1977).

It will be noticed that such values cannot be obtained without r*(HF) being known. However, an attempt will be made to calculate approximate values for (T FT F′); since experimental data on HF-doped ice show that the relation between the dislocation velocity and the stress on the one hand is less linear in the whole temperature range 250–270 K (i.e. r*(HF) > r*) and, on the other hand, exhibits only a small variation with temperature (i.e. the decrease of r*(HF) with temperature is less than that of r*), for every temperature a value r 0 *(HF) has been used in Equation (4) which is the average between r*(T) and r*(273). (The theoretical curve r*(T) which is chosen is that leading to the interpretation of experimental data, as will be mentioned later.)

The results presented in Table I indicate a strong accumulation effect of HF molecules in the dislocation cores: this conclusion is in agreement with the hypothesis of Reference Haltenorth and KlingerHaltenorth and Klinger (1977), nevertheless, the whole quantity of HF molecules being in the cores of the dislocations (maximum density: 1010 m–2) proved to be about three orders of magnitude less than the total content of HF in the crystal, which is self-consistent with our preceding assump-tion indicating that HF would mainly be found in substitutional solution.

Furthermore, K S seems to increase slightly with temperature, especially in the vicinity of T F; since the thermodynamic approach which was introduced to describe the melting of mixture ice–impurity is probably not precise enough, this K S variation will not be taken into account and an average value of K S ≈ 5 × 103 will be used.

The accumulation of HF molecules in the dislocations cores induces an additional variation of the free enthalpy ΔG(HF) which is given by

Once more, only the upper limit of the parameter ΔH HF is known: it is the enthalpy of dissolution of HF in water (3 × 109 J m–3) taken from an infinite dilution until a concentration of about 0.1 is reached; the other parameter, ΔS HF, is approximately the entropy of mixing HF molecules (concentration K S[HF]C) with H20 molecules in the dislocations cores (about 106 J m–3K–1).

In this case the relation giving ΔG (Reference PerezPerez and others, 1978) must be modified to take into account ΔG(HF); thus r*(HF) can be calculated in the case of an ice crystal doped with HF (with global concentration [HF]C) from the relation

(5)

Theoretical curves of r*(HF) as a function of temperature corresponding to [HF]C = 10–5 and to several values of the parameters ΔH HF and ΔS HF, are shown in Figure 6. It appears clearly that doping ice with HF induces an increase of r* which is, moreover, less dependent on temperature, in agreement with the preceding remarks about the experimental data.

Fig. 6. Theoretical values of r*(HF) versus temperature with [HF]C = 10–5; KS = 5 × 103; ΔS1 = 5 × 105 J m–3 K–1; γ1 = 4 × 10–3 J m–2 (A) or 7 × 10–2 (B); ΔHHF = 109 (a), 2 × 109 (b), 2.5 × 109 (c) J m–3; and ΔSHF = 3.66 × 106 (a), 7.33 × 106 (b), 9.14 × 106 (c) J m–3 K–1, Dashed lines: [HF]C = 0.

For better accuracy, it would be necessary to use the values of r*(HF) instead of r 0*(HF) in Table I and to recalculate as implied by iterative methods. Nevertheless, this proved to be unnecessary since the substitution of r 0*(HF) by r*(HF) leads to a variation in Ks which is small with regard to the approximation implied by taking Ks constant and equal to 5 × 103.

Not only do the HF molecules modify the radius of dislocation cores, but also the structure relaxation time τ 1 calculated in the preceding part of this work ( Equation 1)). In fact, the concentration of broken bonds C in the dislocations cores is probably modified by the presence of the HF molecules and becomes C′. Due to thermal activation, the hydrogen bonds whose energy is situated between ϵ and ϵ + dϵ exhibit the following equilibrium:

(6)

Following both this equilibrium and the linear distribution law it was assumed that the number of intrinsic broken bonds L B among those considered is given by:

The HF molecules can form only one hydrogen bond instead of two in the case of H2O molecules; thus, to have the bond ab (Fig. 7a) broken, two conditions are required, first the H2O molecule a can be replaced by one HF molecule (the probability is Ks[HF]C), and secondly the proton of HF is placed in position 2 (the probability is ½). Hence the number of extrinsic broken bonds can be expressed by

Fig. 7. Concentration of broken bonds such as AB as discussed in the text (a) as a function of [HF]C for several temperatures (b).

In fact, there is a modification of the equilibrium (6) when impurity molecules such as HF are added and the number of broken bonds is L B′. The analysis of this modification of equilibrium is similar to that of Reference KrögerKröger (1974) concerning the effect of HF on the concentration of ionic or Bjerrum defects in ice; this analysis being complicated, two extreme cases will be discussed:

  • (i)

    the number of broken bonds L B′ is approximately L B,
  • (ii)

    is approximately L B (HF).

The limit between those two cases is given by

which corresponds to a critical value of ϵ given by:

Then the total number of broken bonds can be calculated

The concentration of broken bonds is:

This result is in agreement with the fact that when [HF]C is high, C′ is equal to ½Ks[HF]C, which corresponds to extrinsic broken bonds only (ϵ0 ≈ 0) and when [HF]C is small, C′ approaches the concentration of intrinsic broken bonds C (ϵ0 ≈ E). The variation of C′ versus [HF]C is numerically calculated and the result is shown in Figure 7b in the case of a temperature ranging between 240 and 270 K. Such a result will be used and the velocity of dislocations will be given by (Equation 2) in which r* and C arc replaced by r*(HF) and C′ respectively.

3.2 Application to velocity measurements

In our previous paper, it was shown how (Equation 2) could be used in the case of pure ice. Owing to the improvement of the theory, it is possible now to explain the results in both the cases of pure and HF-doped ice.

Though (Equation 2) is difficult to compare directly with the experimental data since the physical factors C (or C′) and r* (or r*(HF)) are not known, the latter depending on ΔS1 and γ 1 (and ΔH HF, ΔS HF), the effect of shear stress appears to be correctly described by the present analysis.

In fact, at low temperature (i.e. with low values of r*) and (or) at very low shear stress

Then we have

(7)

thus v d varies linearly with the stress τ, and this linear dependence disappears when τ increases and the non-linearity is the more pronounced the higher the temperature or the higher the HF content. This remark is in very good agreement with experimental data.

(Equation 7) has been used to obtain E from the temperature dependence of the slope at zero stress of the curves v d (τ), within a temperature range included between 251 and 270 K (Fig.8(a)). The values 0.10 eV < E < 0.11 eV was obtained. Thus the value E = 0.105 eV was used to draw the theoretical curves of v d against τ and T.

Fig. 8. Comparison between plots of either logarithm of the slope at zero stress of dislocation velocity (a) or logarithm of low stress internal friction (b) (solid line: pure ice; dashed line: doped ice).

In the case of HF-doped ice, (Equation 7) is still valid with C replaced by C′, so it is possible to obtain C′ from low-stress values of the velocity of dislocations measured in HF-doped ice (concentration ≈ 10–5). Figure 9 shows that the values of C′ are slightly higher than C (in both cases the calculation is done with τ 0 = 10–13 s and b = 4.5 × 10–10 m). Moreover the calculated points are in agreement with the theoretical curve plotted using results from Figure 7: thus the analysis of the preceding section does take into account the effect of HF, which induces an increase of the velocity by a factor ≈ 2.

Fig. 9. Concentration C as function of temperature; experimental points obtained from the slope of curves vd(τ) at τ = 0 and theoretical curves obtained with E = 0.105 eV in the case of pure ice (a) or with data of Figure 7 in the case of doped ice (b).

In the range of non-linear behaviour, other factors (γ 1, ΔSl, ΔH HF, and ΔS HF) should be defined from the stress dependence of v d and from the variation of this stress dependence with temperature. In the present work the values r* and r*(HF) are obtained from the results of Maï; these results are shown in Figure 10.

In the case of pure ice, a satisfactory agreement between experimental points and the theoretical curve is obtained by using γ l = (5±1) × 10–3 J m–2 and ΔS 1 = (5±1) × 105 J m–3 K–1. In the case of HF-doped ice, two simplifying assumptions are made:

  • (i) The parameters γ 1 and ΔS 1 are nearly the same as with pure ice.

  • (ii) As suggested by the variation of experimental values of r* and of r*(HF) with temperature (Fig. 10) the effect of the doping agent is negligible near the melting point T F of ice, that is ΔH HFT F ΔS HF ≈ 0.

Fig. 10. Variation of r* with temperature; experimental points correspond to X-ray observations in the case of pure ice (a) and of HF-doped ice (b). Theoretical curves are calculated with γ1 = 5 × 103 J m–2, ΔS1 = 5 × 105 J m–3 K–1, ΔHHF = 1.2 × 109 Jm–3, and SHF = 4.4 × 106 J m–3 K–1. All the results obtained by internal friction measurements done an six different specimens of pure ice are in the hatched band.

In these conditions, a reasonable agreement between experimental and the theoretical curves (b) (Fig. 10) is obtained by putting ΔH HF = (1.2±0.2) × 109 J m–3 and ΔS HF = (4.4±0.7) × 106 J m–3 K–1 in (Equation 5).

Thus, these values of E (or C), and r* on the one hand, and C′ and r*(HF) on the other have been used in (Equation 2) to draw theoretical curves of v d = F(τ, T) for pure and doped ice respectively, Figure 1(a) and (b) shows a comparison between the theoretical curves and Maï’s experimental results.

It is noteworthy that ΔS 1 and γ 1 are, as predicted, lower than the entropy of melting ice (1.1 × 106 J m–3 K–1)and the ice–liquid-water interfacial energy (3 × 10–2 m–2) respectively; similarly, ΔH HF and ΔS HF are of the same order as the enthalpy of dissolution of HF in water (3 × 109 J m–3) and the entropy of mixing HF molecules with H20 molecules (about 106 J m–3 K–1) respectively.

3.3 Application to internal friction results

Since the high-temperature internal friction has been interpreted in terms of movement of dislocations, any description of this internal friction must imply the use of a relation between dislocation velocity and stress.

Indeed, the strain-rate of a crystal having a dislocation density ρ d is

The logarithmic decrement is given by

where

is the energy dissipated during one cycle of sinusoidal stress, and
is that maximum elastic energy during this stress cycle.

If the sine stress is given by

we obtain:
(8)

As a first step, it was proposed (Reference PerezPerez and others, 1976) that:

  • (i) kink diffusion induces amplitude-independent internal friction;

  • (ii) thermal activation of double kinks induces temperature and amplitude-dependent internal friction.

Actually, the result obtained at high-amplitude stresses or after HF doping have shown that this description is not in good agreement with all the experimental data.

Another attempt (Reference PerezPerez and others, 1978) was made by replacing v d in (Equation 9) by an empirical expression in agreement with results recalled in Figure I.

In fact, it is now possible to calculate (Equation 8) by using (Equation 2); after some simplification we get

(9)

where

(10)

P is the period of the pendulum, and K = GP2 ≈ 3 × 109 N m–2 s2

At low stress, (Equation 9) can be simplified and we have

(11)

Thus it can be concluded that though there is only one type of internal friction due to the movement of dislocations in ice, this can be observed either at low stress where it is only temperature dependent (Fig. 2) or at increasing stresses where it becomes amplitude dependent above a stress which is lower the higher the temperature.

3.3.1 Interpretation of amplitude-dependent internal friction

First, local internal friction must be calculated from global results shown in Figure 3 which correspond to a specimen with a stress gradient (Reference PerezPerez and others, 1965).

Then it has been verified that it is possible to find values of α such that straight lines are obtained when plotting

against sinh
(Fig. 1 1a and 11b for pure and HF-doped ice respectively). r* is calculated with regard to (Equation 10). All the values of r* versus temperature obtained for six different specimens of pure ice are in the hatched band in Figure 10.

In addition, the comparison between an HF-doped ice and the same ice before doping is shown in Figure 12. Despite the lack of accuracy, it can be noticed that HF doping induces an increase of r* which becomes less temperature dependent: these results are comparable to those obtained from X-ray topography (Fig. 10) and are in agreement with the preceding model.

3.3.2 Temperature-dependent internal friction measured at low stresses

Equations (10) and (11) have been used to. describe the low-stress temperature-dependent internal friction. In the case of pure ice where C is proportional to T 2, a straight line is obtained when In (δ(0, T) T/v)) is plotted as a function of T –2 (Fig. 8b). On the one hand, the slope gives E as (0.095±0.005) eV and, on the other hand, the ordinate extrapolated to infinite temperature gives the density of dislocations 5 × 107 < ρd < 5 × 108 m–2. It is noteworthy that these values are in agreement with those obtained from topographic observations (0.105±0.005) eV and 108±1 m–2 respectively.

The situation is more complicated with doped ice; C′ is given by (Section 3.1)

with C 1 and C 2 constants depending on doping concentration. This explains why the slope of the straight line obtained in the diagram In (δ(0, T) T)/v against T –2 is lower (Fig. 8b) after doping ice with HF. More generally, it appears that the present analysis of low-stress temperature-dependent internal friction is easily applicable only in the case of ice of high purity with fresh dislocations (freshly grown ice crystal or plastically deformed ice). With ice containing some impurities or with aged ice, the slope of the line In (δ(0, T) T/v)) = f (T –2) is always lower.

Fig. 11. Representation of the experimental data of Figure 3 in the diagram

, sinh
in the case of pure ice (a) or doped ice (b).

Fig. 12. Variation of r* obtained from internal friction measurements done on the same specimen before (black dots) and after (white dots) doping.

4. Conclusion

In short the following remarks can be drawn out:

  • (a) The present model provides the possibility of calculating, for the velocity v d of dislocations in ice, theoretical values which agree with experimental results, contrary to previous models. Moreover the non-linear relation between v d and the stress is thus properly described.

  • (b) It is shown that doping ice with about 10 p.p.m. of HF induces a slight increase of C (concentration of broken bonds) leading to an increase of v d by a factor ranging from 1 to 10; experiments yield a factor which approximates 2; it will be remembered that the relations obtained from assuming the reorientation of the H2O molecules indicates, for the same doping, a factor of 10 to 100 depending on purity of non-doped ice. This appears to be another argument against the description of obstacles to dislocation glide in ice in the form of proton disorder. It is noteworthy that, if HF induces a softening effect in ice, NH3 leads rather to a hardening effect as shown by Reference Jones and GlenJones and Glen (1969) on an ice single crystal doped with 5 p.p.m. NH3, though it was not observed in the case of ice with only 0.6 p.p.m. NH4OH (Reference Nakamura and JonesNakamura and Jones, 1973). This hardening effect can be explained by the preceding analysis: the equilibrium reaction (6) is displaced towards the left side by NH3 molecules if the existence of an accumulation of such molecules in the core is once more admitted. Thus the concentration C of broken bonds is decreased and v d is expected to decrease.

  • (c) When the temperature is not high enough (typically less than 200 to 250 K), the preceding assumption concerning the extended core is probably no longer valid. In these conditions the crystalline core aspect seems more probable since it allows obstacles to dislocation glide which were anticipated (proton disorder, Peierls hills,…) to be considered. This last remark may explain that the softening effect of HF at 253 K is small compared with the effects observed at 203 K (Reference Jones and GlenJones and Glen, 1969). Experimental data in an extended temperature range are needed in order either to improve the model or to test the applicability of the models quoted previously (Reference WhitworthWhitworth, 1978).

  • (d) Such a description of the dynamic behaviour of dislocations has been applied to interpret the high-temperature internal friction of ice measured at low frequency. Theoretical expressions have been obtained which are in a fair agreement with experimental features observed in the case of pure or HF-doped ice.

To sum up, a model of a dislocation with a non-crystalline extended core added to the assumption of correlated movements of H2O molecules seems, at present, the only model able to take into account all the experimental features of dynamic behaviour of dislocations in ice. When the ice is HF-doped, the radius of the extended core is increased and becomes less temperature dependent; moreover, the rate of transition from one configuration to another by correlated movements of H2O molecules is higher, leading to a small increase of dislocation velocity. These characteristics have lead us to interpret in a self-consistent way both types of results obtained either by direct X-ray measurements of the velocity of dislocations or by internal friction measurements at low frequency.

References

Angell, C. A. 1971. Two-state thermodynamics and transport properties for water as zeroth-order results of a “bond lattice” model. Journal of Physical Chemistry, Vol. 75, No. 24, p. 3698705.Google Scholar
Etienne, S., and others. 1975. Estimation du coefficient d’amortissement en présence de perturbations; application à la mesure du coefficient de frottement intérieur du matériau, [par] S. Etienne, J. Perez, et B. Dubuisson. Journal of Physics E, Vol. 8, No. 8, p. 66670.Google Scholar
Fletcher, N. H. 1970. The chemical physics of ice. Cambridge, Cambridge University Press. (Cambridge Monographs on Physics.)CrossRefGoogle Scholar
Glicksman, H. E., and Vold, C. L. 1972. Heterophase dislocations: an approach towards interpreting high temperature grain boundary behaviour. Surface Science, Vol. 31, p. 5067.CrossRefGoogle Scholar
Haltenorth, H., and Klinger, J. 1977. Solubility of hydrofluoric acid in ice Ih, single crystals. Solid State Communications, Vol. 21, No. 6, p. 53335.Google Scholar
Jones, S. J., and Glen, J. W. 1969. The effect of dissolved impurities on the mechanical properties of ice crystals. Philosophical Magazine, Eighth Ser., Vol. 19, No. 157, p. 1324.Google Scholar
Kröger, F. A. 1974. The chemistry of imperfect crystals. Second edition. Vol. 2. Amsterdam, North-Holland Publishing Co. [Ch. 18 “Ice”, p. 78399.]Google Scholar
Maï, C. 1976. Étude par topographie X du comportement dynamique des dislocations dans la glace Ih. Comptes Rendus Hebdomadaires des Séances de l'Académic des Sciences (Paris), Sér. B, Tom. 282, No. 22, p. 51518.Google Scholar
Maï, C., and others. 1978. Vitesse des dislocations dans la glace dopée avec HF, [par] C. Maï, J. Perez, J. Tatibouët, et R. Vassoille. Journal de Physique, Lettres, Tom. 39, No. 17, p. 30710.Google Scholar
Nakamura, T., and Jones, S. J. 1973. The effect of impurities on the mechanical properties of ice single crystals. Ottawa, Environment Canada. Inland Waters Directorate. Water Resources Branch. (Scientific Series, No. 24.)Google Scholar
Perez, J., and others. 1965. Calculation of the amplitude dependence of internal friction from measurements of torsional damping, [by] J. Perez, D. Péguin, and P. [F.] Gobin. British Journal of Applied Physics, Vol. 16, No. 9, p. 134751.Google Scholar
Perez, J., and others. 1976. Internal friction and microplasticity of ice Ih, by J. Perez, C. Maï, J. Tatibouët, and R. Vassoille. Nuovo Cimento, Ser. 11, Vol. 33B, No. 1, p. 8695.Google Scholar
Perez, J., and others. 1978. Cooperative movements of H20 molecules and dynamic behaviour of dislocations in ice Ih, by J. Perez, C. Maï, and R. Vassoille. Journal of Glaciology, Vol. 21, No. 85, p. 36174.Google Scholar
Vassoille, R., and others. 1977. Comportement anélastique de la glace I h dopée avec HF, [par] R. Vassoille, J. Perez, C. Maï, [et] J. Tatibouët. Journal of Physics and Chemistry of Solids, Vol. 38, No. 11, p. 1297300.Google Scholar
Vassoille, R., and others. 1978. Inelastic behaviour of ice Ih single crystal in the low-frequency range due to dislocations, by R. Vassoille, C. Maï, and J. Perez. Journal of Glaciology, Vol. 21, No. 85, p. 37584.CrossRefGoogle Scholar
Whitworth, R. W. 1978. The core structure and the mobility of dislocations in ice. Journal of Glaciology, Vol. 21, No. 85, p. 34159.Google Scholar
Figure 0

Fig. 1. Experimental points and theoretical curves giving the dislocation velocity in pure ice (a) and HF-doped ice (b).

Figure 1

Fig. 2. Internal friction versus temperature before HF doping (dashed line) and after doping for five different specimens (curves 1 to 5).

Figure 2

Fig. 3. Internal friction versus strain amplitude before (a) and after (b) HF doping.

Figure 3

Fig. 4. Linearized approximation of the variation of the free enthalpy with temperature in the case of liquid water, ice, and non-crystalline core phase.

Figure 4

Table I. Values of parameters for HF-doped ice

Figure 5

Fig. 5. Phase diagram HF-H20; experimental points are given by Haltenorth and Klinger (1977).

Figure 6

Fig. 6. Theoretical values of r*(HF) versus temperature with [HF]C = 10–5; KS = 5 × 103; ΔS1 = 5 × 105 J m–3 K–1; γ1 = 4 × 10–3 J m–2 (A) or 7 × 10–2 (B); ΔHHF = 109 (a), 2 × 109 (b), 2.5 × 109 (c) J m–3; and ΔSHF = 3.66 × 106 (a), 7.33 × 106 (b), 9.14 × 106 (c) J m–3 K–1, Dashed lines: [HF]C = 0.

Figure 7

Fig. 7. Concentration of broken bonds such as AB as discussed in the text (a) as a function of [HF]C for several temperatures (b).

Figure 8

Fig. 8. Comparison between plots of either logarithm of the slope at zero stress of dislocation velocity (a) or logarithm of low stress internal friction (b) (solid line: pure ice; dashed line: doped ice).

Figure 9

Fig. 9. Concentration C as function of temperature; experimental points obtained from the slope of curves vd(τ) at τ = 0 and theoretical curves obtained with E = 0.105 eV in the case of pure ice (a) or with data of Figure 7 in the case of doped ice (b).

Figure 10

Fig. 10. Variation of r* with temperature; experimental points correspond to X-ray observations in the case of pure ice (a) and of HF-doped ice (b). Theoretical curves are calculated with γ1 = 5 × 103 J m–2, ΔS1 = 5 × 105 J m–3 K–1, ΔHHF = 1.2 × 109 Jm–3, and SHF = 4.4 × 106 J m–3 K–1. All the results obtained by internal friction measurements done an six different specimens of pure ice are in the hatched band.

Figure 11

Fig. 11. Representation of the experimental data of Figure 3 in the diagram , sinh in the case of pure ice (a) or doped ice (b).

Figure 12

Fig. 12. Variation of r* obtained from internal friction measurements done on the same specimen before (black dots) and after (white dots) doping.