In vein material from the abandoned copper mine at Dhurode, County Cork, Republic of Ireland, the sulphosalt meneghinite is partly replaced by later minerals, notably a symplectite of galena and bournonite. Mineral analyses and proportions indicate that the bulk Pb/Sb ratio in the symplectite is almost identical to that of the meneghinite. It is inferred that Pb and Sb were the relatively immobile elements whose short-range segregation controlled the scale of symplectite intergrowth, during a diffusive replacement reaction in which Cu and S were added from the vein-forming fluid. This is the second sulphosalt-bearing symplectite for which immobile elements have been identified. In both cases, the inferred replacement reaction causes a volume increase, approximately 15% in the present example.

Zoned hibonites from a kalsilite, leucite, spinel, corundum, perovskite gneiss from the southern Indian granulite terrain near Punalur, Kerala, have rims that are the most Ti-rich yet recorded (0.83–0.87 Ti atoms per 19 O) and are essentially free of REE elements (ΣREE < 0.01 atoms per 19 O) while the cores are the most REE-rich compositions yet recorded (ΣREE = 0.55–0.65 atoms per 19 O). Within the limits of analytical uncertainty, the compositions of the hibonite can be related to the theoretical end-member CaAl12O19 by the substitutions REE R2+ ⇌ CaAl and R2+R4+ ⇌ Al2 with the REE-rich cores containing in excess of 50% of the REE R2+ Al11O19 end member. Minor substitution of Na for Ca occurs in the rims, while non-stoichiometry in both the cores and rims is indicated by partial 12-fold site occupancy. Ion-microprobe analysis of the REE-rich hibonites reveals strong enrichment in LREE with La/Lu c. 250 000.

Comparison of the infrared spectra of georgeite and a phase which can be reproducibily synthesised in the laboratory shows that the mineral is an amorphous analogue of malachite, Cu2CO3(OH)2. Synthetic studies also explain the chemical conditions under which georgeite may form, as well as those which can cause it to react to either malachite or chalconatronite. Parallels may be drawn between the laboratory observations and known mineral associations of georgeite.

Deep azure-blue beryl is reported from veins in Upper Devonian conglomerate from southeast Ireland. Microprobe analysis, Mössbauer spectroscopy and loss on ignition suggest an unusual chemistry with an exceptionally high degree of substitution of Fe and Mg for Al, and extreme amounts of Na and water held within channel sites in the structure. The calculated structural formula is:

Refractive indices (1.603 and 1.595) and the cell edge, a, (9.292 Å) are also unusually high. Colourless beryl from the same locality, some of which forms cores to blue beryl prisms, has less octahedral substitution and a lower Fe/Mg ratio. The origin of the beryl is tentatively linked to contemporaneous volcanic activity.

Orbicules in diorite from the Grenville Front zone of eastern Labrador are defined by shell structures alternately enriched and depleted in biotite, epidote and magnetite. Hornblende occurs locally in orbicule cores and the matrix, but not in the shells. The shells enclose plagioclase-rich (An40–45), leucodioritic cores containing biotite, epidote, magnetite and/or hornblende-bearing mafic clots. The matrix of the orbicules is mineralogically-similar to the orbicule cores, but is mesocratic, and contains relatively sodic plagioclase and accessory quartz and K-feldspar. In places, hornblende contains quartz oikocrysts, implying the resorption of early-formed clinopyroxene, and is rimmed by biotite and epidote. The latter phases also occur as inclusions in quartz-free hornblende interpreted to have crystallized directly from the magma. Epidote has a pistacite content of 21 to 26 and occurs as (1) tiny, idiomorphic crystals (‘epidote I’) enclosed by plagioclase or hornblende, and (2) relatively large (to 1 mm) grains with vermicular textures (‘epidote II’), particularly where in mutual contact with biotite (or hornblende) and plagioclase. These microstructures suggest that epidote is a magmatic phase which formed by direct crystallization from the magma, and by reaction of previously-formed minerals with the magma.

The following approximate paragenetic sequence has been inferred for orbicule cores and the matrix: clinopyroxene (clinopyroxene resorbed [→ poikilitic hornblende]), epidote I, Ca-Na plagioclase, biotite, hornblende (biotite and/or hornblende ± plagioclase resorbed [→ epidote II]), quartz + K-feldspar. Biotite compositions became progressively more Fe-rich during crystallization (XMg ⋍ 0.6 → 0.4), and the first-formed plagioclase (inclusions in quartz-free hornblende in orbicule cores) is more calcic (An51) than the last (matrix grains: An35).

The appearance of epidote early in the crystallization history of the diorite testifies to elevated PH2O and PTotal (PT). The most aluminous hornblende indicates maximum PT of 5 to 6 kbar. Orbicule shell structures are interpreted to have crystallized from supercooled boundary layers enclosing water-saturated globules within the dioritic magma. Although sufficient to suppress the formation of hornblende in the shell structures, the extent of magma supercooling did not permit the development of comb layering in the orbicules. Supercooling is attributed to an influx into the magma of water from an unidentified source.

Experiments to explore the dissolution behaviour of Pb-rich orthoclase (1% PbO) and quartz have been carried out in the presence of pH buffered and unbuffered potassium acetate and lithium acetate solutions at 150°C and 50 MPa (500 bars). In pH-unbuffered potassium acetate solutions Pb and Na solubilities (and pH) increase with increasing fluid acetate content, reflecting increased bulk dissolution of the feldspar; silica solubility decreases despite an increase in measured pH from 7.5 to 8.9. Similarly, in experiments at pH 6 using a potassium acetate pH buffer, quartz solubility decreases with increasing acetate content. The use of lithium acetate pH buffers (pH 6 at 25°C) in experiments with orthoclase plus quartz results in the precipitation of the lithium chlorite cookeite, complicating interpretation of the fluid chemistry. It is also apparent that in the presence of orthoclase plus quartz (but not albite alone) acetate decarboxylation takes place at much higher rates than expected for the experimental configuration used. The observed effects are unlikely to be due to the presence of acetate alone; the influence of species produced by acetate decay (especially carbonate) must also be considered. This study provides little support for models which call upon acetate to enhance the solubility of aluminosilicate minerals, and suggests that acetate decarboxylation in nature may limit its involvement in dissolution processes. It emphasises the potential of feldspars as sources of elements for mineralisation, such as Pb.

Inclusions occurring in leucites from the Oscar and Zirkel Mesa leucite lamproites consist of high (>10 wt.%) and low (<4 wt.%) K2O discrete glass phases which are interpreted to have resulted from silicate liquid immiscibility. Both glasses are quartz-normative and rich in Ti, Fe, Mg, Ca and Ba and poor in Al. The high-K glass is strongly peralkaline. Neither of the glasses have compositions representative of any known lamproites. These inclusions represent the first described examples of silicate-silicate immiscibility shown by glass in alkaline rocks.

Apophyllite, analcite, chabazite, prehnite and stilbite are described from pectolite-, chlorite-, calcite- and quartz-bearing veins and joint coatings in the late Carboniferous quartz dolerite of the Whin Sill of the northern Pennines. These veins represent the final hydrothermal stages in the sill's emplacement and are not related to the widespread lead-zinc-barium-fluorite mineralization of the northern Pennine orefield. Thermogravimetric studies of apophyllites from the two Whin Sill occurrences reveal that at one locality the minreal is fluorapophyllite, at the other hydroxyapophyllite.

Gypsum evaporites are forming under desiccating conditions in relict cave passages in Mynydd Llangattwg, south Wales. Sulphur isotope compositions of these sulphates indicate that oxidation of diagenetic pyrite in the overlying Millstone Grit is the source of sulphate solutions, rather than dissolution of evaporitic sulphate in the limestones.

The Penouta deposit is associated with a small Hercynian apogranite stock that intrudes Precambrian-Cambrian gneisses of the Ollo de Sapo Formation. Tin ore occurs as disseminations of cassiterite in the apogranite and as greisenized zones and quartz veins which traverse both the alkaline leucogranite and the surrounding metamorphic country rocks.

A fluid-inclusion study, utilizing microthermometric, crushing tests and Raman spectroscopic techniques on quartz from an intragranitic vein and a greisen of the host rock, indicates that the evolution of fluids was similar in both samples and occurred in the three main stages: The first stage is characterized by complex CO2 (CO2-N2-CH4-H2S) and complex CO2 aqueous (H2O-NaCl-CO2-N2-CH4-H2S) fluids of low salinity (Tm ice > −6°C), homogenization temperatures between 250 and 410°C homogenization pressures below 900 bars, and thermobarometric trapping conditions with temperatures below 700°C and pressures below 3250 bars. These fluids were probably responsible for the greisenization of the apogranite and wall rocks, and the precipitation of cassiterite. The second stage is represented by low-salinity aqueous solutions (H2O-NaCl) with Tm ice ⩾ −4.5°C, trapped at homogenization temperatures between 110 and 300 °C and homogenization pressures below 100 bars. This stage can be correlated with kaolinization. The third stage is characterized by higher salinity aqueous fluids (Tm ice ⩾ −16.5°C) containing Na+ and other cations, trapped at homogenization temperatures between 100 and 130°C and homogenization pressures below 5 bars. These fluids can be associated with the epigenetic or supergene phases of the orebody.

Fluid inclusion data and geochemical evidence lead to a genesis of Ba-F (Pb-Zn) lodes of the Spanish Central System as related to fluid mixing of hot (>300 °C), low saline (<0.6 molal), Na-K deep fluids and cool (<100 °C), oxidized, more saline (>2.8 molal), Na-K-Ca-Mg brines of phraeatic origin. Ore formation took place at relative low depth and temperatures (from 270 to 120 °C) in a regime of increasing fO2, (Ca + Mg)/Na ratio and pH of the fluids towards the surface. Such evolution destabilizes the chloride metal complexes, allowing for the precipitation of Zn and Pb carried by the deep solution.

Vertical fluorite-baryte zonation is explained in terms of mineral solubilities. Fluorite deposition in the deeper mineralized zone is related to a slight increase of mCa2+ of the fluid in the lower part of the fluid mixing zone; further increase of mCa2+ and mMg2+ towards the surface promotes fluorite dissolution. Increase of fO2 in the shallow part of the hydrothermal system promotes the oxidation of , resulting in baryte formation.

We propose an ore genesis related to fluid mixing in shallow hydrothermal systems associated with an extension of Permo-Triassic age. Such interpretation is in agreement with the present day ideas for the genesis of many of the Ba-F deposits in the Hercynian Belt of Europe.

The Mari Rosa mine lies within a low-grade Precambrian alternating series of black shales and metagreywackes in the Spanish Hercynian massif. There are two generations of mineralized veins: V2, gold-(stibnite)-bearing quartz veins, parallel to the main cleavage, and V3, stibnite-bearing quartz veins which postdate the main deformation event.

Four main types of inclusions have been identified. Type I, II and IV are aqueous-carbonaceous inclusions, with variable degrees of filling, while type III are non-aqueous and typically single-phase at room temperature. Except for type I (absent in V3), similar inclusions have been observed in both V2 and V3 veins. Gas compositions are always characterised by CH4-N2-CO2 assemblages, ranging from CO2-rich mixtures in the earliest inclusions (type I), to N2-rich mixtures in the latest inclusions (type IV).

Gold precipitation in V2 veins can be related to type I inclusions at T > 380°C (TH = 300–380°C). A subsequent drop in XCO2 and cooling are recorded in type II and III inclusions, interpreted to be the result of unmixing of a previously homogeneous fluid derived from type I. This boiling would provoke the precipitation of stibnite at 300°C and 1 kbar. The type IV inclusions, which are the richest in H2O, represent a late fluid circulation at lower temperatures (TH = 190–280°C).

The chain of Late Subhercynian granitoids can be traced along the Srednogorie-Istranca-Pontid belt. The Demirköy pluton outcrops in the Istranca segment. The rocks of the pluton range from diorite through grandiorite to perthite granite with granodiorite predominating. On the basis of 25 chemical analyses, the intrusive setting of the granitoid has been investigated. Calcic to calc-alkaline and peraluminous to metaluminous character indicate a subduction-related origin. Low to moderate concentrations of the large-ion lithophiles (LIL), high field strength elements (HFS), light rare earth elements (La, Ce) and low HFS/LIL ratios indicate a mantle-derived magma with subduction-related enrichment. Trace element discrimination diagrams such as Rb/Zr-Nb, Rb/Zr-Y, Rb-SiO2 and Rb-(Nb + Y), are particularly indicative of normal arc-setting for the samples.

The Demirköy granitoid is chemically indistinguishable from the Upper Cretaceous granitoids of Strednogorie to the west and the Pontids to the east. This extensive maximum of plutonism can be considered as a time marker in the northern Tethys subduction system.

In the Ordovician Snowdon Volcanic Group caldera quartz-magnetite-hematite-pyrite assemblages occur in a breccia vein in rhyolitic tuff and vein swarms in basalt. The veins developed pre-cleavage. Elevated levels of tin and tungsten in the veins, and of fluorine in the wall rocks, suggest a magmatic contribution to the mineralising fluids. The chemistry of the veins differs from that of the base-metal sulphide veins found elsewhere in the caldera.

Based on geological studies, 141 rock analyses and 5 trace element analyses of metabasites, the present paper deals with the rock association, chemical features, protolith formation and the original tectonic settings upwards through the Lower Proterozoic metamorphic strata in the Dabieshan-Lianyungang area, in the south-east of the North China Platform. The results of the study indicate that the lower and middle parts of the metamorphic strata comprise terrigenous clastics, phosphoritic and aluminous sedimentary formations which formed under stable continental margin conditions. In the middle-upper part a calc-alkaline volcano-sedimentary formation under the active continental margin was developed. The Lower Proterozoic meta-strata of sedimentary-volcanosedimentary origin from bottom upwards suggest that the tectonic evolution of the south-eastern margin of the North China Platform is a process from stabilization to mobilization. This process suggests a northward subduction of the Yangtze Plate under the North China Plate during the later part of the early Proterozoic.