Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-22T06:23:15.924Z Has data issue: false hasContentIssue false

Floor diagrams and enumerative invariants of line bundles over an elliptic curve

Published online by Cambridge University Press:  07 July 2023

Thomas Blomme*
Affiliation:
Université de Neuchâtel, Rue Émile Argan 11, Neuchâtel 2000, Switzerland thomas.blomme@unige.ch
Rights & Permissions [Opens in a new window]

Abstract

We use the tropical geometry approach to compute absolute and relative enumerative invariants of complex surfaces which are $\mathbb {C} P^1$-bundles over an elliptic curve. We also show that the tropical multiplicity used to count curves can be refined by the standard Block–Göttsche refined multiplicity to give tropical refined invariants. We then give a concrete algorithm using floor diagrams to compute these invariants along with the associated interpretation as operators acting on some Fock space. The floor diagram algorithm allows one to prove the piecewise polynomiality of the relative invariants, and the quasi-modularity of their generating series.

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited. Compositio Mathematica is © Foundation Compositio Mathematica.
Copyright
© 2023 The Author(s)

1. Introduction

1.1 Overview

The goal of this paper is to study classical enumerative invariants of some ruled surfaces over an elliptic curve $\mathbb {C} E$, generalizing the case of the trivial $\mathbb {C} P^1$-bundle $\mathbb {C} E\times \mathbb {C} P^1$ studied by Böhm, Goldner and Markwig in [Reference Böhm, Goldner and MarkwigBGM22]. The principal tool is a correspondence theorem that relates the classical enumerative invariants to tropical counts of curves in suitable affine integer manifolds. Once in the scope of tropical geometry, it is then possible to use combinatorial techniques to relate the tropical counts to counts of floor diagrams and compute generating series using a Fock space approach.

Enumerative geometry

The varieties we are interested in are ruled surfaces over an elliptic curve. The latter are classified in [Reference HartshorneHar13]. According to the classification, all but two are of the following form: take an elliptic curve $\mathbb {C} E$ and a line bundle $\mathcal {L}$ over it, and then consider the projectivization $\mathbb {P}(\mathcal {L}\oplus \mathcal {O})$, where $\mathcal {O}$ is the trivial bundle, in order to get a complex surface that is a $\mathbb {C} P^1$-bundle over $\mathbb {C} E$. Such a surface is denoted by $\mathbb {C} X$. If the degree $\delta$ of the line bundle is non-zero, it can assumed to be positive and there is only one surface up to isomorphism which is thus denoted by $\mathbb {C} X_\delta$. If the degree is $0$, surfaces are classified by $\alpha \in \mathbb {C} E\simeq \mathrm {Pic}^0\mathbb {C} E$ up to inversion and the corresponding surface is denoted by $\mathbb {C} X_{0,\alpha }$.

Remark 1.1 Theorems 2.12 and 2.15 in the Surfaces chapter from [Reference HartshorneHar13] classify $\mathbb {C} P^1$-bundles over an elliptic curve, which are by definition obtained by projectivizing a rank $2$ vector bundle. In this paper, we only consider the surfaces associated to the decomposable ones. There are exactly two other surfaces up to isomorphism obtained from undecomposable one, and are not handled in this paper.

Constructed as a projectivization $\mathbb {P}(\mathcal {L}\oplus \mathcal {O})$, the surfaces $\mathbb {C} X$ contain several distinguished curves: the $0$-section $E_0$ image of $e\in \mathbb {C} E\mapsto [0:1]$ and the $\infty$-section $E_\infty$ image of $z\in \mathbb {C} E\mapsto [l:0]$. It also contains the fibers of $\mathbb {C} X\to \mathbb {C} E$. The second homology group of $\mathbb {C} X$ generated by the class of a fiber $F$ and the zero section $E_0$. We can then count the number of genus $g$ curves in some homology class $d_1 E_0+d_2 F$ passing through a suitable number of points. Such a count happens not to depend on the choice of the points as long as it is generic, nor the choice of the elliptic curve. It only depends on the choice of $\mathcal {L}$ through its degree $\delta$, as long as $\mathcal {L}$ is generically chosen if this degree is $0$. The paper aims at providing a concrete way to compute these invariants. Similarly, it is also possible to count curves with a fixed tangency profile with the divisors $E_0$ and $E_\infty$. One thus obtains instead so-called relative invariants.

Correspondence theorems and tropical geometry

In the case of toric surfaces, a major breakthrough in the computation of enumerative invariants was realized in the beginning of the 21st century with the use of tropical geometry. In [Reference MikhalkinMik05], Mikhalkin proved a correspondence theorem that relates counts of classical curves passing through some specified points, and counts of tropical curves in $\mathbb {R}^2$ satisfying the same kind of conditions. Using different techniques, namely log-geometry, Nishinou and Siebert [Reference Nishinou and SiebertNS06] also proved a similar correspondence theorem. Both approaches were generalized to various settings with new different kinds of constraints, for instance with the insertion of $\psi$-constraints. See [Reference ShustinShu06, Reference TyomkinTyo12, Reference TyomkinTyo17, Reference Mandel and RuddatMR20] or [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21] for generalizations or other proofs of the correspondence theorem.

Unfortunately, the tropical geometry approach is often restricted due to the possible appearance of so-called superabundant tropical curves in some situations. For such curves, the dimension of the space in which the tropical counterparts to the classical curves vary does not match the dimension of the associated complex space. This complicates the correspondence. For instance, in [Reference NishinouNis20], Nishinou gives a correspondence theorem for curves in abelian surfaces, which are all superabundant. In our case, superabundant curves can occur for the spaces $\mathbb {T} X_{0,\alpha }$ coming from a torsion element $\alpha$. In the case of the trivial bundle handled in [Reference Böhm, Goldner and MarkwigBGM22], this is avoided due to the fact that the superabundance comes from curves that realize sections of the line bundle, for which the realization theorem is easily proved.

Tropical geometry and concrete computations

The use of a suitable correspondence theorem allows one to reduce a complex count to a tropical count, whose computation is still waiting to be carried out. Computing the tropical invariants can be a rather difficult combinatorial task. In the case of invariants in toric surfaces, the tropical Caporaso–Harris formula, which is proved in the tropical setting in [Reference Gathmann and MarkwigGM07a], allows one to carry out the computation for the case of the projective plane $\mathbb {C} P^2$. It also computes enumerative invariants relative to a line. The idea of the tropical proof of the formula is to choose the points constraints in a degenerated way, so that the tropical curves split into simple pieces that are easier to handle. An iterated application of the Caporaso–Harris formula leads the tropical curve that we are looking for to break into small pieces and adopt a so-called floor decomposition. This amounts to choose the points through which the tropical curves pass in a stretched position. The fact that the curve break allows to project the problem onto the direction in which the points are stretched and reduce the 2-dimensional enumerative problem to a 1-dimensional enumerative problem.

Concrete computations and floor diagrams

Following the iteration of the Caporaso–Harris formula, it only suffices to handle tropical curves passing through a stretched position. To this end, Brugallé and Mikhalkin introduced floor diagrams in [Reference Brugallé and MikhalkinBM07] and [Reference Brugallé and MikhalkinBM08]. These were later used, for instance, by Mikhalkin and Fomin in [Reference Mikhalkin and FominMF10]. They enable concrete, and to some extent efficient, computations of tropical invariants. The use of floor diagrams has since been generalized to other situations, for instance by Block and Göttsche [Reference Block and GöttscheBG16a] to refined enumerative invariants, and by Cavalieri, Johnson, Markwig and Ranganathan [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR18, Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21] to compute descendant Gromov–Witten invariants of Hirzebruch surfaces.

Presented this way, floor diagrams may appear to be a mainly toric object, taking its meaning in tropical geometry. Yet, they also appear in non-toric situations, see [Reference BrugalléBru15], where the heuristic of floor diagrams in more general situations is explained.

Floor diagrams and Fock space

The use of floor diagrams essentially reduces a $2$-dimensional enumerative problem to a $1$-dimensional one. It reduces a problem on tropical curves to a problem on tropical covers. Tropical covers are maps between graphs studied in [Reference CaporasoCap14] and [Reference Cavalieri, Johnson and MarkwigCJM10]. It also emphasizes some deep relation between planar geometry, and operators on a Fock space. This approach was pioneered by Cooper and Pandharipande in [Reference Cooper and PandharipandeCP17], where they relate Severi degrees of $\mathbb {C} P^1\times \mathbb {C} P^1$ and $\mathbb {C} P^2$ to matrix elements of exponential of some operator on a Fock space. This approach was generalized in [Reference Block and GöttscheBG16a] to a wider family of toric surfaces, and in [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21] for Hirzebruch surfaces with the insertion of descendant conditions.

The dimension reduction coming from the use of floor diagrams essentially comes from the existence of a projection. In the case of toric surfaces, although it is possible to project in several directions, each time one obtains a problem on a line. When we do enumeration in, for instance, the trivial bundle $\mathbb {T} E\times \mathbb {T} P^1$, there are now two directions in which one can project: the vertical direction projects onto a line and the horizontal direction projects onto a circle. In [Reference Böhm, Goldner and MarkwigBGM22], the authors use the projection to $\mathbb {T} E$ to relate enumerative invariants of $\mathbb {T} E\times \mathbb {T} P^1$ to some counts over an elliptic curve, relating to some other problems they studied in [Reference Böhm, Goldner and MarkwigBGM18]. Such projection over a circle also relates to a Fock space interpretation using a trace formula which was already noticed in [Reference Cooper and PandharipandeCP17] to compute some invariants of $\mathbb {C} E\times \mathbb {C} P^1$.

Tropical geometry and refined invariants

The correspondence theorem [Reference MikhalkinMik05] for toric surfaces expresses the multiplicity of a tropical curve as a product over the vertices of the tropical curve. In [Reference Block and GöttscheBG16b], Block and Göttsche proposed to replace the vertices multiplicity $m$ by their quantum analog $[m]_q=({q^{m/2}-q^{-m/2}})/({q^{1/2}-q^{-1/2}})$, which is a symmetric Laurent polynomial in the variable $q$. This new multiplicity is called refined, since it specializes to the usual complex multiplicity when $q$ is set equal to $1$. In [Reference Itenberg and MikhalkinIM13], Itenberg and Mikhalkin proved that for the tropical enumerative problem of counting curves of fixed genus in a toric surface passing through a suitable number of points, the refined multiplicity from Block–Göttsche also provides an invariant. Furthermore, the setting in which Block and Göttsche extended the results from [Reference Cooper and PandharipandeCP17] in [Reference Block and GöttscheBG16a] is already adapted to their refined multiplicities, as they consider a deformed version of the Fock space and Heisenberg algebra from [Reference Cooper and PandharipandeCP17]. In this way, their computations yield the refined invariants versions of Severi degrees considered in [Reference Block and GöttscheBG16b] and [Reference Itenberg and MikhalkinIM13] rather than the usual ones. The meaning of these tropical refined invariants remains an intense area of studies [Reference Göttsche and ShendeGS14, Reference BousseauBou19, Reference MikhalkinMik17, Reference BlommeBlo21] that have already been generalized to different settings [Reference BlommeBlo22, Reference Göttsche and SchroeterGS19, Reference Blechman and ShustinBS19, Reference Schroeter and ShustinSS18], but remain quite mysterious.

1.2 Results

We now develop the various results of the paper, and their role in the previous considerations.

Complex setting

We consider enumeration of curves in $\mathbb {C} X$, which is either $\mathbb {C} X_\delta$ or some $\mathbb {C} X_{0,\alpha }$ for a generic choice of $\alpha$. A curve in $\mathbb {C} X_\delta$ is said to be of bidegree $(d_1,d_2)$ if it realizes the homology class $d_1 E_0+d_2 F$, where $E_0$ is the class of the zero section, and $F$ the class of a fiber. The number of genus $g$ irreducible curves of bidegree $(d_1,d_2)$ passing through $\delta d_1+2d_2+g-1$ points in general position is denoted by $N_{g,(d_1,d_2)}^{\delta,\mathrm {cpx}}$. The count including reducible curves is denoted with a $\bullet$. This count happens not no depend on the choice of the point configuration as long as it is generic, nor the choice of the elliptic curve, and only depends on the surface through the degree $\delta$. See § 2 for details.

Remark 1.2 The genus of a curve $\mathbb {C} C$ is defined to be $g=1-\chi (\mathbb {C} C)$. In particular, the genus of a reducible curves with $r$ components $\mathbb {C} C_i$ is $1-r+\sum _1^r g(\mathbb {C} C_i)$.

A curve of bidegree $(d_1,d_2)$ has $\delta d_1+d_2$ intersection points with the $0$-section $E_0$, and $d_2$ intersection points with the $\infty$-section $E_\infty$. Thus, one can further look for genus $g$ curves of bidegree $(d_1,d_2)$ that have a specified intersection profile with $E_0$ and $E_\infty$. Such data are given by two partitions $\mu _0\vdash \delta d_1+d_2$ and $\mu _\infty \vdash d_2$ ($\vdash n$ meaning partition $n$; see the end of the Introduction for notation about partitions). A curve is said to have tangency profile $(\mu _0,\mu _\infty )$ if it has $\mu _{0i}$ (respectively, $\mu _{\infty i}$) points of tangency index $i$ with $E_0$ (respectively, $E_\infty$).

We want to impose additional conditions of two types: having a tangency of order $i$ at a specific point of $E_0$ (respectively, $E_\infty$), having a tangency of order $i$ somewhere on $E_0$ (respectively, $E_\infty$). To this extent, let $\mu _0,\nu _0,\mu _\infty,\nu _\infty$ be four partitions such that $\mu _0+\nu _0\vdash \delta d_1+d_2$ and $\mu _\infty +\nu _\infty \vdash d_2$, one denotes by $N_{g,(d_1,d_2)}^{\delta,\mathrm {cpx}}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$ the number of irreducible curves passing through $|\nu _0|+|\nu _\infty |+g-1$ points in generic position such that:

  • we have $\mu _{0i}$ (respectively, $\mu _{\infty i}$) intersection points of tangency index $i$ at specified points of $E_0$ (respectively, $E_\infty$);

  • we have $\nu _{0i}$ (respectively, $\nu _{\infty i}$) more intersection points of tangency index $i$ at unspecified points of $E_0$ (respectively, $E_\infty$).

Similarly, the number with a $\bullet$ denotes the number including the reducible curves. This is exactly the analog of the enumerative problem defining the invariants $N_{d,g}(\alpha,\beta )$ involved in the Caporaso–Harris formula from [Reference Gathmann and MarkwigGM07a]. They also do not depend on the choice of the constraints as long as they are generic, nor the choice of the elliptic curve, and they only depend on $\mathbb {C} X$ through the degree $\delta$.

Tropical setting

In the tropical world, one defines tropical counts of genus $g$ tropical curves of bidegree $(d_1,d_2)$ in the tropical surface $\mathbb {T} X$, which is the total space of some tropical line bundle over a tropical elliptic curve $\mathbb {T} E$. Briefly, they are constructed as follows, see § 3 for more details.

  • In the case of the trivial line bundle, this total space is just $\mathbb {T} E\times \mathbb {R}\subset \mathbb {T} E\times \mathbb {T} P^1$, where $\mathbb {T} E$ is a tropical elliptic curve. Topologically, a tropical elliptic curve is just a circle. Thus, $\mathbb {T} E\times \mathbb {R}$ is an open cylinder, and $\mathbb {T} E\times \mathbb {T} P^1$ is a compact cylinder. Another way to obtain it is to take the strip $[0;l]\times \mathbb {R}\subset \mathbb {R}^2$ and to identify the points $(0,y)$ and $(l,y)$.

  • For a non-trivial degree $0$ line bundle, we still take the strip $[0;l]\times \mathbb {R}\subset \mathbb {R}^2$ but identify the two sides by a translation of size $\alpha$. Only the value of $\alpha$ mod $l$ is important, and we get a cylinder $\mathbb {T} X_{0,\alpha }$.

  • If the line bundle is of non-zero degree, the total space $\mathbb {T} X_\delta$ is still a cylinder but with a non-trivial integer structure. It can be constructed from the strip $[0;l+\varepsilon [\times \mathbb {R}$ identifying the small strips $[0;\varepsilon [\times \mathbb {R}$ and $[l;l+\varepsilon [\times \mathbb {R}$ by a shear transformation. In other words, still viewing it as some quotient of the strip $[0;l]\times \mathbb {R}$ identifying both sides, a line that crosses the right boundary component of the strip comes back from the left boundary component with a different slope. Only the degree $\delta$ matters and we get cylinders $\mathbb {T} X_\delta$.

Correspondence theorem

We provide a theorem that gives a correspondence between the count of complex curves in $\mathbb {C} X$ which are solution to the previous enumerative problem, and the count of tropical curves inside $\mathbb {T} X$ solution to the analog tropical problem, counted with their usual multiplicity as a product over the vertices. If $h:\Gamma \to \mathbb {T} X$ is a trivalent parametrized tropical curve (see § 3 for definitions), its multiplicity is

\[ m^\mathbb{C}_\Gamma=\prod_V m_V, \]

where the product is over the trivalent vertices $m_V=|{\det (a_V,b_V\!)}|$, with $a_V$ and $b_V$ are two out of the three outgoing slopes of $h$. In contrast to the toric case, there is no unique affine chart for $\mathbb {T} X$, so slopes are not really defined, but fortunately, the determinant is invariant under a change of chart, so that the multiplicity is well-defined.

Theorem 4.13 The count of genus $g$ parametrized tropical curve of bidegree $(d_1,d_2)$ in $\mathbb {T} X$ passing through $\delta d_1+2d_2+g-1$ points in general position with multiplicity $m^\mathbb {C}_\Gamma$ does not depend on the choice of the points and satisfies

\[ N_{g,(d_1,d_2)}^{\delta,\mathrm{cpx},\bullet}= N_{g,(d_1,d_2)}^{\delta,\mathrm{trop},\bullet} \quad \text{and} \quad N_{g,(d_1,d_2)}^{\delta,\mathrm{cpx}}=N_{g,(d_1,d_2)}^{\delta,\mathrm{trop}}. \]

The count of genus $g$ parametrized tropical curve of bidegree $(d_1,d_2)$ in $\mathbb {T} X$ and tangency profile $(\mu _0+\nu _0,\mu _\infty +\nu _\infty )$, prescribed tangencies at $|\mu _0|$ points on $E_0$ and $|\mu _\infty |$ points on $E_\infty$, passing through $|\nu _0|+|\nu _\infty |+g-1$ points in general position with multiplicity $({1}/{I^{\mu _0+\mu _\infty }}) m^\mathbb {C}_\Gamma$ (where $I^\mu =\prod _i i^{\mu _i}$) does not depend on the choice of the constraints and satisfies

\begin{gather*} N_{g,(d_1,d_2)}^{\delta,\mathrm{cpx},\bullet}(\mu_0, \mu_\infty,\nu_0,\nu_\infty)=N_{g,(d_1,d_2)}^{\delta, \mathrm{trop},\bullet}(\mu_0,\mu_\infty,\nu_0,\nu_\infty),\\ N_{g,(d_1,d_2)}^{\delta,\mathrm{cpx}}(\mu_0,\mu_\infty, \nu_0,\nu_\infty)=N_{g,(d_1,d_2)}^{\delta,\mathrm{trop}}(\mu_0, \mu_\infty,\nu_0,\nu_\infty). \end{gather*}

Tropical refined enumeration

Then, we show that replacing the complex multiplicity with the refined multiplicity from Block–Göttsche yields a tropical invariant. Following the definition of the complex multiplicity preceding the correspondence theorem, the refined multiplicity is defined as

\[ m_\Gamma^q=\prod_V [m_V]_q=\prod_V \frac{q^{m_V{/}2} -q^{-m_V{/}2}}{q^{1/2}-q^{-1/2}}\in\mathbb{Z}[q^{\pm 1/2}]. \]

Theorem 4.17 The count of genus $g$ parametrized tropical curve of bidegree $(d_1,d_2)$ in $\mathbb {T} X$ passing through $\delta d_1+2d_2+g-1$ points in general position with multiplicity $m_\Gamma ^q$ does not depend on the choice of the points as long as it is generic.

Remark 1.3 The analog statement for the relative refined counts, i.e. the refined count of curves with the tangency conditions to $E_0$ and $E_\infty$ is also true. The invariance with respect to the choice of the tropical elliptic curve $\mathbb {T} E$ follows from a scaling argument, and the independence on the choice of the cylinders if $\delta =0$ follows from the computation using floor diagrams.

Floor diagram algorithm

Following [Reference Brugallé and MikhalkinBM07], we introduce suitable floor diagrams and their multiplicities to provide an algorithm to compute the invariants involved in the above theorems, both classical and refined. As in the toric surface case, the floor diagram algorithm can also be seen as the iterated version of some Caporaso–Harris-type formula, which is stated in Theorem 5.22.

Generating series and behavior of the invariants

The floor diagram algorithm enables a concrete computation of the invariants. Although this could be the sought purpose, it is often more interesting to study the behavior of and the regularity of the families of invariants, varying some of their arguments, such as the genus or the degree. For instance, consider double Hurwitz numbers, which are cover of $\mathbb {C} P^1$ satisfying specific ramification data. There is a way to use tropical geometry to compute them. It was observed in [Reference Goulden, Jackson and VakilGJV05], and later studied in [Reference Shadrin, Shapiro and VainshteinSSV08], that double Hurwitz numbers with a prescribed number of ramification points are piecewise polynomial functions. This was recovered using tropical geometry in [Reference Cavalieri, Johnson and MarkwigCJM10]. Such behavior was also proved for double Gromov–Witten invariants of Hirzebruch surfaces in [Reference Ardila and BrugalléAB17]. We here prove a similar statement: we use the floor diagrams to prove a polynomiality statement for the relative Gromov–Witten invariants of $\mathbb {C} X$. We consider partitions $\nu _0$ and $\nu _\infty$ of fixed length $l_0$ and $l_\infty$, but of arbitrary size, provided that they satisfy $\|\nu _0\|-\|\nu _\infty \|=\delta d_1$ for some fixed $d_1$. Let $d_2=\|\nu _\infty \|$. We look for curves of genus $g$ of fixed bidegree $(d_1,d_2)$ and tangency profile $(\nu _0,\nu _\infty )$ passing through $l_0+l_\infty +g-1$ points in general position. We consider a partition $\nu$ of fixed length $l$ as a tuple $(\nu _1,\ldots,\nu _l)$.

Theorem 6.6 For any fixed genus $g$, degree $d_1$, partition lengths $l_0$ and $l_\infty$, the function $(\nu _0,\nu _\infty )\mapsto N^\mathrm {trop}_{g,(d_1,d_2)}(0,0,\nu _0,\nu _\infty )$ is a piecewise polynomial function in the variables $\nu _{0,1},\ldots,\nu _{0,l_0}$, $\nu _{\infty, 1},\ldots,\nu _{\infty, l_\infty -1}$.

Recently, Brugallé and Puentes [Reference Brugallé and Jaramillo PuentesBJ22] proved a polynomiality statement for the coefficients of a fixed codegree in the families of refined invariance of toric surfaces. Such a behavior could also be studied for the hereby introduced refined invariants using the floor diagrams.

In the case of the $\mathbb {C} X_{0,\alpha }$, instead of varying the intersection number with the zero-section $d_2$, it is also possible to vary the intersection number with a fiber $d_1$. The floor diagrams introduced in this paper allow one to recover the quasi-modularity statement from [Reference Böhm, Goldner and MarkwigBGM22]. Similarly to the polynomiality, the quasi-modularity is also a desirable property because it allows for a control of the asymptotic of the coefficients. Quasi-modular functions are a generalization of the modular forms, which are functions having nice transformations properties with respect to the action of the modular group ${\rm PSL}_2(\mathbb {Z})$. Following [Reference Kaneko and ZagierKZ95], quasi-modular forms express as a polynomial in the Eisenstein series $G_2$, $G_4$ and $G_6$, where $G_{2k}(y)=\sum _1^\infty (\sum _{d|n}d^k)y^n$ up to an affine transformation. They are stable by the operator $D=y({\mathrm {d}}/{\mathrm {d} y})$. The following theorem also generalizes the statement from [Reference Böhm, Goldner and MarkwigBGM22] because it also encompasses the case of relative invariants.

Theorem 6.9 For fixed $g$, $d_2$, $\mu _0$, $\mu _\infty$, $\nu _0$ and $\nu _\infty$, the generating series

\[ F_{g,d_2}(\mu_0,\mu_\infty,\nu_0,\nu_\infty)(y)=\sum_{d_1} N_{g,(d_1,d_2)}^\mathrm{trop}(\mu_0,\mu_\infty,\nu_0,\nu_\infty)y^{d_1}\!, \]

are quasi-modular forms.

Fock space approach

Finally, we adapt the considerations of [Reference Block and GöttscheBG16a] to our setting using our floor diagrams to relate the enumerative invariants to some matrix coefficients of some operators in a Heisenberg algebra acting on a Fock space, which is the content of Theorem 7.4. This allows one to express the generating series of the invariants considered in the paper.

1.3 Further directions

We now give several directions in which the result of the papers could be extended.

Descendant invariants

One further direction would be to add $\psi$-constraints, as in [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21]. It should be possible to adapt the setting, at least for degree $0$ line bundles, to compute descendant Gromov–Witten invariants of line bundles over an elliptic curve, and express their generating series in term of other operators on the Fock space. This corresponds to counting tropical curves with vertices which are not trivalent anymore. However, this computation remains formal since it only reduces the computation of descendant invariants to descendant invariants with a unique point condition, which remain to be computed. Moreover, the appearance of superabundant curves needs to be handled carefully.

Real refined enumeration

In some situations, namely in [Reference MikhalkinMik17] and [Reference BlommeBlo21], the tropical refined invariants are connected to some refined real enumerative invariants. More precisely, we perform a signed count of real rational curves with prescribed tangency conditions on the toric boundary of the considered variety, refined by the value of a suitable quantum index. Unfortunately, except the fibers, the surfaces $\mathbb {C} X$ do not contain any rational curves. However, some recent results of Itenberg and Shustin [Reference Itenberg and ShustinIS23] proved that a real refined invariance result for genus $1$ curves in some toric surfaces. One could look into a possible generalization of the result to the case of $\mathbb {C} X$.

1.4 Plan of the paper

The paper is organized as follows.

  • In § 2, we introduce the surfaces $\mathbb {C} X$ and present enumerative problems in it, leading to the definition of the enumerative invariants.

  • In § 3, we translate the first section in the tropical setting, introducing the tropical spaces $\mathbb {T} X$. We also define tropical curves inside $\mathbb {T} X$.

  • In § 4, we prove the main abstract results of the paper by giving the correspondence theorem to relate the tropical setting to the complex setting, and the tropical refined invariance statement.

  • In § 5, we get to the computational point of view by introducing floor diagrams that provide an algorithm to compute the invariants introduced in the preceding sections, and give some consequences such as a Caporaso–Harris-type formula.

  • Section 6 is devoted to some examples and consequences of the use of floor diagrams.

  • Finally, we provide an alternate point of view on floor diagrams using operators on some Fock space.

1.5 Notation

If $\mu =(\mu _1,\mu _2,\ldots )$ is a partition of an integer $d$, meaning $\sum i\mu _i=d$, we write $\mu \vdash d$. We set

\[ |\mu|=\sum \mu_i,\quad \|\mu\|=\sum_i i\mu_i,\quad I^\mu=\prod_i i^{\mu_i}. \]

If $\nu$ is a second partition, we say that $\nu \leqslant \mu$ if $\nu _i\leqslant \mu _i$ for each $i$, and we set

\[ \begin{pmatrix}\mu \\\nu \\\end{pmatrix}=\prod_i \begin{pmatrix}\mu_i \\\nu_i \\\end{pmatrix}. \]

2. Complex setting

2.1 Ruled surfaces over an elliptic curve

We consider ruled surfaces (i.e. $\mathbb {C} P^1$-bundles) over an elliptic curve $\mathbb {C} E$. They are constructed as the projectivization $\mathbb {P}(\mathcal {V})$ of a rank $2$ vector bundle $\mathcal {V}\to \mathbb {C} E$. These ruled surfaces are classified in [Reference HartshorneHar13]. We have the following alternative:

  • either $\mathcal {V}$ does split as the sum of two line bundles, in which case the ruled surface is of the form $\mathbb {P}(\mathcal {L}\oplus \mathcal {O})$ for some line bundle $\mathcal {L}$ on the elliptic curve $\mathbb {C} E$;

  • or $\mathcal {V}$ does not split, and it leads to two distinct ruled surfaces up to isomorphism [Reference HartshorneHar13].

We refer to [Reference Griffiths and HarrisGH14] for an introduction to line bundles and divisors on curves. Moreover, as elliptic curves are one-dimensional abelian varieties, we also refer to the section of [Reference Griffiths and HarrisGH14] for the construction of line bundles over abelian varieties as quotient of the trivial bundle on $(\mathbb {C}^*)^n$ (here just $\mathbb {C}^*$), writing the abelian variety as a quotient of $(\mathbb {C}^*)^n$. Here, $\mathbb {C} E$ can be written of the form $\mathbb {C}^*/\langle \lambda \rangle$. Assume that $\mathbb {C} E=\mathbb {C}^*/\langle \lambda \rangle$. Let $\alpha \in \mathbb {C}^*$ and $\delta \in \mathbb {Z}$. Then the quotient of $\mathbb {C}^*\times \mathbb {C}$ (respectively, $\mathbb {C}^*\times \mathbb {C}^*$ or $\mathbb {C}^*\times \mathbb {C} P^1$) by the action generated by

\[ (z,w)\longmapsto (\lambda z,\alpha z^\delta w), \]

is a line bundle (respectively, $\mathbb {C}^*$-bundle or $\mathbb {C} P^1$-bundle) over $\mathbb {C} E=\mathbb {C}^*/\langle \lambda \rangle$. It is of degree $\delta$. Moreover, up to isomorphism, every line bundle is of this form.

We specifically care about the ruled surfaces of the form $\mathbb {P}(\mathcal {L}\oplus \mathcal {O})$. The line bundle $\mathcal {L}$ can be assumed to be of degree $\delta \geqslant 0$. The ruled surfaces are then classified by the degree $\delta$ if $\delta >0$, or by $\mathcal {L}\in \mathrm {Pic}^0(\mathbb {C} E)$ up to inversion if $\delta =0$ since a line bundle and its opposite yield biholomorphic complex surfaces. This is due to the fact that $\mathbb {C} E$ acts by translation on itself, and the induced action is transitive on the set of degree $\delta$ line bundles if $\delta \neq 0$, and trivial on the set of degree $0$ line bundles. In the following, we assume that $\mathcal {L}$ is given of non-negative degree. If $\delta >0$, we denote the ruled surface by $\mathbb {C} X_\delta$, and if $\delta =0$, we denote the surface associated to an element $\alpha \in \mathrm {Pic}^0(\mathbb {C} E)\simeq \mathbb {C} E$ by $\mathbb {C} X_{0,\alpha }$. When we do not care about which surface, we just write $\mathbb {C} X$.

Remark 2.1 By abuse of notation, if $\delta =0$, $\alpha \in \mathbb {C}^*$ also denotes the line bundle in $\mathrm {Pic}^0(\mathbb {C} E)\simeq \mathbb {C} E$. Indeed, up to a change of basis of the form $(z,w z^k)$, we see that $\alpha$ only matters up to multiplication by $\lambda$, meaning $\alpha \in \mathbb {C}^*/\langle \lambda \rangle =\mathbb {C} E$.

The second homology group of $\mathbb {C} X$ is generated by the class $F$ of a fiber, and $E_0$ of the $0$-section $z\in \mathbb {C} E\mapsto [0: 1]$. Note that we also have an $\infty$-section $E_\infty$ given by $z\in \mathbb {C} E\mapsto [l: 0]$. Their classes satisfy

\[ E_\infty=E_0-\delta F. \]

The Chern class $c_1(\mathbb {C} X)\in H^2(\mathbb {C} X,\mathbb {Z})$ satisfies the following:

  • $c_1(\mathbb {C} X)\cdot F=2$ since the tangent bundle of $\mathbb {P}(\mathcal {L}\oplus \mathcal {O})$ restricted to a fiber is the sum of the trivial bundle and tangent bundle of $\mathbb {C} P^1$, which is isomorphic to $\mathcal {O}(2)$;

  • $c_1(\mathbb {C} X)\cdot E_0=\delta$ since the tangent bundle of $\mathbb {C} X$ restricted to $E_0$ is the sum of the tangent bundle of $\mathbb {C} E$, which is trivial, and the line bundle $\mathcal {L}$, which has Chern class $\delta$;

  • using the relation between $E_\infty$, $E_0$ and $F$, we get that $c_1(\mathbb {C} X)\cdot E_\infty =-\delta$, which is unsurprisingly the Chern class of $\mathcal {L}^{-1}$, for which the $0$-section and $\infty$-section are switched.

2.2 Curves in the total space and enumerative problems

2.2.1 Dimension of the moduli space of curves

We now consider curves inside the ruled surfaces $\mathbb {C} X$.

Definition 2.2 We say that a curve $\varphi :\mathbb {C} C\to \mathbb {C} X$, where $\mathbb {C} C$ is a genus $g$ Riemann surface, is of bidegree $(d_1,d_2)$ if it realizes the class $d_1 E_0+d_2 F$.

Remark 2.3 Recall that the genus of a curve $\mathbb {C} C$ is defined by the relation $\chi (\mathbb {C} C)=2-2g$. If the curve is irreducible, its first Betti number is $2g$, but this is no longer the case if it is reducible.

Example 2.4 The sections of the line bundle $\mathcal {L}$ realize the homology class $E_0$ and are therefore curves of bidegree $(1,0)$. Meromorphic sections with $a$ poles realize the class $E_0+ aF$.

For a class to be realizable, except $E_\infty$ itself, it has to intersect non-negatively with $E_\infty$ and $F$, implying that $d_1,d_2\geqslant 0$. Conversely, as both $E_0$ and $F$ are realized by complex curves, the cone of realizable class is defined by $d_1,d_2\geqslant 0$.

Let $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$ be the moduli space of curves of bidegree $(d_1,d_2)$ inside $\mathbb {C} X$. If the Picard group of $\mathbb {C} X$ was of rank $0$, it would just be $\mathbb {P}(H^0(\mathbb {C} X,\mathcal {L}_{(d_1,d_2)}))$, where $\mathcal {L}_{(d_1,d_2)}$ is a line bundle on $\mathbb {C} X$ having Chern class $(d_1,d_2)$. as the Picard group is not of rank $0$ but of rank $1$, $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$ is a projective bundle over $\mathrm {Pic}^0(\mathbb {C} E)$. Its dimension is given by the adjunction formula and is

\[ \dim\mathcal{M}(\mathbb{C} X,(d_1,d_2))=\frac{(\delta d_1+2d_2)(d_1+1)}{2}. \]

We now give the Proposition 15 from [Reference Kleiman and ShendeKS13], adapted to our setting: it is valid for any projective surface up to replacing the linear system by curves in a fixed class. It allows us to compute the dimension of the space of curves inside $\mathbb {C} X$.

Proposition 2.5 [Reference Kleiman and ShendeKS13]

Let $W$ be an irreducible subvariety of $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$, let $\mathscr {C}_W\to W$ be the tautological family of curves, let $\widetilde {\mathscr {C}_W}\to \mathscr {C}_W$ be the normalization, let $f_W :\widetilde {\mathscr {C}_W}\to \mathbb {C} X$ be the natural morphism, and let $0\in W$ be a general closed point. Assume that the curve $\mathscr {C}_0$ is reduced.

  1. (i) There exists a natural embedding $T_0 W\hookrightarrow H^0(\widetilde {\mathscr {C}_0},\mathcal {N}_{f_0}/\mathcal {N}^\mathrm {tor}_{f_0})$, where $\mathcal {N}$ denotes the normal sheaf and $T_0 W$ the tangent space to $W$.

  2. (ii) If $c_1(\mathbb {C} X)\cdot \mathscr {C}\geqslant 1$ for any irreducible component $\mathscr {C}\subset \mathscr {C}_0$, then

    \[ \dim W\leqslant h^0(\widetilde{\mathscr{C}_0},\mathcal{N}_{f_0}/\mathcal{N}^\mathrm{tor}_{f_0}) \leqslant c_1(\mathbb{C} X)\cdot(d_1,d_2)+p_g(\mathscr{C}_0)-1. \]
  3. (iii) If we have equality in item (ii) and $c_1(\mathbb {C} X)\cdot \mathscr {C}\geqslant 2$ for an irreducible component $\mathscr {C}$ of $\mathscr {C}_0$, then $\mathscr {C}$ is immersed.

  4. (iv) If item (ii) is an equality and $c_1(\mathbb {C} X)\cdot \mathscr {C}\geqslant 2$ for any irreducible component $\mathscr {C}$ of $\mathscr {C}_0$, then $\mathcal {N}_{f_0}$ is invertible and the map from item (i) is an isomorphism.

The proposition asserts that provided $\delta d_1+2d_2\geqslant 1$, which is always satisfied unless $d_1=d_2=0$, or $\delta =d_2=0$, any irreducible component of the space of reduced genus $g$ curves of bidegree $(d_1,d_2)$ inside $\mathcal {M}(\mathbb {C} F,(d_1,d_2))$ is of dimension at most $\delta d_1+2d_2+g-1$. Furthermore, if we consider only irreducible curves and we assume $\delta d_1+2d_2\geqslant 2$, which is always satisfied unless $\delta =0$ and $d_2=0$, or $\delta =1$ and $(d_1,d_2)=(1,0)$, curves are immersed. If $\delta =1$, curves of bidegree $(1,0)$ are just sections of the bundle, so the dimension count is given by Riemann–Roch and the fact that the curves are immersed is obvious. If $\delta =0$, beside $E_0$ and $E_\infty$, we later show in Proposition 2.13 that curves of bidegree $(d_1,0)$ can only occur if the line bundle $\mathcal {L}$ is torsion. If it is chosen generically, there are none and the assumption is always satisfied.

Furthermore, we have the strata of nodal curves of genus $g$ and bidegree $(d_1,d_2)$. By the adjunction formula, they have ${(\delta d_1+2d_2)(d_1-1)}/{2}+1-g$ nodes. Thus, each node imposing a codimension $1$ constraint, the dimension of the strata is at least

\[ \dim\mathcal{M}(\mathbb{C} X,(d_1,d_2))-\bigg(\frac{(\delta d_1+2d_2)(d_1-1)}{2}+1-g\bigg) =\delta d_1+2d_2+g-1. \]

In particular, provided there are nodal curves, there are components in the space of reduced genus $g$ curves of the expected dimension. There might be components of smaller dimension (although it is possible to show that there are, in fact, none) but they do not matter for the enumerative problem that we consider.

Remark 2.6 There might also be curves which are not nodal and can be deformed in a space of the expected dimension, but the computation that we do near the tropical limit proves that there are none either.

2.2.2 Classical invariants

We now have the following enumerative problem.

Problem 2.7 How many (irreducible) genus $g$ curves of bidegree $(d_1,d_2)$ passing through $\delta d_1 +2d_2 +g-1$ points in generic position are there?

If the constraints are chosen generically, as the number of constraints is chosen equal to the dimension, we expect a finite number of curves.

Proposition 2.8 The number of reduced irreducible genus $g$ curves of bidegree $(d_1,d_2)$ passing through a generic point configuration $\mathcal {P}$ of $\delta d_1 +2d_2 +g-1$ points is finite. It does not depend on the choice of $\mathcal {P}$ as long as it is generic.

Proof. Taking into account all choices of $\mathcal {P}$, we get a family of subspaces $W_\mathcal {P}$ of $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$ indexed by $\mathcal {P}\in \mathbb {C} X^{\delta d_1+2d_2+g-1}$: $W_\mathcal {P}$ is the subspace of curves passing through $\mathcal {P}$. Globally, the $W_\mathcal {P}$ cover $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$, and we thus have transversality with the subspace of reduced genus $g$ curves. Sard's lemma ensures that we also have transversality with a generic member of $(W_\mathcal {P})$. As the dimensions have been chosen to be complementary, we get a finite number of curves passing through a generic $\mathcal {P}$.

The number of intersection points (i.e. curves passing through $\mathcal {P}$) does not depend on the choice of $\mathcal {P}$ since it corresponds to the intersection number inside $\mathcal {M}(\mathbb {C} X,(d_1,d_2))$ between the space of genus $g$ reduced curves and $W_\mathcal {P}$.

Moreover, if the point configuration is chosen generically, no non-reduced curve can pass through them since its image varies in a space of strictly smaller dimension, and thus cannot meet the constraints by genericity. Thus, the reduced count in fact contains all the curves. The obtained invariant is momentarily denoted by $N_{g,(d_1,d_2)}^{\mathbb {C} X,\mathrm {cpx}}$.

Proposition 2.9 If $\delta \neq 0$, the number $N_{g,(d_1,d_2)}^{\mathbb {C} X_\delta,\mathrm {cpx}}$ does not depend on the choice of the elliptic curve $\mathbb {C} E$. Furthermore, if $\delta =0$, the number does not depend on the choice of $\alpha \in \mathrm {Pic}^0(\mathbb {C} E)$ as long as it is chosen generically (i.e. not a torsion element), nor the choice of $\mathbb {C} E$. Thus, the numbers only depend on $\delta$, and are denoted by $N_{g,(d_1,d_2)}^{\delta,\mathrm {cpx}}$.

Proof. The argument from Proposition 15 in [Reference Kleiman and ShendeKS13] also apply for any characteristic $0$ field. In particular, they apply for families by considering the field of (converging) Puiseux series $\mathbb {C}\{\{t\}\}$, and then specializing to the fibers. It suffices to take families of elliptic curves of the form $\mathbb {C}^*/\langle \lambda (t) t^l\rangle$, which can either be seen as families of complex elliptic curves, or as curves over the field of Puiseux series $\mathbb {C}\{\{t\}\}$.

The surfaces $\mathbb {C} X_{0,\alpha }$ require a little more care since there might be curves of bidegree $(d_1,0)$, but this class does not satisfy the assumptions of Proposition 15 in [Reference Kleiman and ShendeKS13]. Curves different from $E_0$ and $E_\infty$ occur in such a class only if $\alpha$ is a $d_1$-torsion element in $\mathbb {C} E\simeq \mathrm {Pic}^0(\mathbb {C} E)$. This follows from Proposition 2.13 as we have $D(\mathbb {C} C)=0$ for such a curve. Moreover, such curves may appear as irreducible components of curves of other bidegrees. If $(d_1,d_2)$ is fixed, the set of $\alpha \in \mathbb {C}^*$ for which the classes $(k,0)$ with $k\leqslant d$ contain holomorphic curves is discrete: it corresponds to the preimage in $\mathbb {C}^*$ of torsion elements up to $d_1$ in $\mathrm {Pic}^0(\mathbb {C} E)$. Thus, we can assume that $\alpha$ is not one of them. Moreover, this is still true for $\alpha '$ in a small neighbourhood of $\alpha$.

Finally, we can put the surfaces $\mathbb {C} X_{0,\alpha }$ in a family by considering the construction of $\mathbb {C} X_{0,\alpha }$ with $\alpha$ as a parameter: we quotient $\mathbb {C}^*\times \mathbb {C} P^1\times \mathbb {C}^*$ by the following action,

\[ (z,w,\alpha)\longmapsto (\lambda z,\alpha w,\alpha). \]

The quotient has a well-defined map to $\mathbb {C}^*$ by mapping $(z,w,\alpha )$ to $\alpha$, and it is stable by the action. The preimage of $\alpha \in \mathbb {C}^*$ is $\mathbb {C} X_{0,\alpha }$. Therefore, the intersection number $N_{g,(d_1,d_2}^{\mathbb {C} X_{0,\alpha },\mathrm {cpx}}$ remains the same for $\alpha '$ in a small neighbourhood of $\alpha$ and, thus, for generic $\alpha$.

Remark 2.10 The use of families of the form $\mathbb {C}^*/\langle \lambda t^l\rangle$ is interesting since it allows us to pass to the tropical limit, where a correspondence statement allows us to compute the invariants.

Remark 2.11 These invariants also appear in [Reference Gräfnitz, Ruddat and ZaslowGRZ22] as log Gromov–Witten invariants through degeneration of surfaces.

In total, we get a family of invariants $N_{g,(d_1,d_2)}^{\delta,\mathrm {cpx}}$ for $\delta \geqslant 0$ by counting irreducible curves. Counting reducible curves as well, we denote the invariant by $N_{g,(d_1,d_2)}^{\delta,\mathrm {cpx},\bullet }$.

Remark 2.12 The assumption that $\alpha \in \mathbb {C}^*$ is generic is necessary to get invariance for the following reason. If the parameter $\alpha$ becomes torsion, some irreducible curves might become reducible with some irreducible component being of bidegree $(k,0)$. These components fail to deform for generic $\alpha$ and, thus, the invariance also fails. The invariance could be recovered by carefully counting the curves having irreducible components of bidegree $(k,0)$.

2.2.3 Relative invariants

Let $\varphi :\mathbb {C} C\to \mathbb {C} X$ be a curve of bidegree $(d_1,d_2)$. Intersecting $\varphi (\mathbb {C} C)$ with the two distinguished divisors $E_0$ and $E_\infty$, we get $\delta d_1+d_2$ and $d_2$ intersection points, respectively, counted with multiplicity. The number of intersection points of each tangency index give two partitions $\mu _0\vdash \delta d_1+d_2$ and $\mu _\infty \vdash d_2$. We then say that $\mathbb {C} C$ has tangency profile $(\mu _0,\mu _\infty )$. Furthermore, as $E_0$ and $E_\infty$ are both identified with the elliptic curve $\mathbb {C} E$, we get two divisors

\[ \sum_{i}\sum_{1\leqslant j\leqslant\mu_{0i}}ip_{0ij} \quad \text{and} \quad \sum_{i}\sum_{1\leqslant j\leqslant\mu_{\infty i}}ip_{\infty ij}, \]

for some distinct points $p_{0ij},p_{\infty ij}\in \mathbb {C} E$. In particular, for each curve $\varphi :\mathbb {C} C\to \mathbb {C} X$, we get a divisor $D(\mathbb {C} C)=\sum _{ij} i(p_{0ij}-p_{\infty ij})$ on $\mathbb {C} E$. In fact, we have the following proposition.

Proposition 2.13 If $D_0$ is some divisor on $\mathbb {C} E$ such that $\mathcal {L}\simeq \mathcal {L}_{D_0}$, and $\varphi :\mathbb {C} C\to \mathbb {C} X$ is some curve of bidegree $(d_1,d_2)$, with $d_1\neq 0$, then $D(\mathbb {C} C)$ is equivalent to $d_1 D_0$ on $\mathbb {C} E$.

Proof. If $d_1=1$, it is exactly the fact that the divisor of a meromorphic section of $\mathcal {L}$ satisfies $\mathcal {L}\simeq \mathcal {L}_D$. Another way to view it is as follows: let $s$ and $s'$ be two meromorphic sections of the line bundle. Any linear combination $\alpha s+\beta s'$ of $s$ and $s'$ is still a meromorphic section, and its divisor depends only on $(\alpha,\beta )$ up to multiplication by a non-zero constant. Thus, taking their divisor, we get a map from $\mathbb {C} P^1$ to the Jacobian of the curve, that associates to $[\alpha :\beta ]$ the divisor of the section $\alpha s+\beta s'$. As maps from the projective line to a complex torus are constant, we get that $s$ and $s'$ have equivalent divisors.

If we now take any curve inside the total space $\mathbb {C} X$, it can be considered as a $d_1$-multisection, meaning there are $d_1$ points in the fiber over each point in the base. If $s$ is a meromorphic section of the line bundle, we can still consider linear combinations between the multisection and $s$, except these are now $d_1$-multisection. Varying the coefficients and taking the divisor, we similarly get a map from $\mathbb {C} P^1$ to the Jacobian of the curve. As these maps are constant, we get that the divisor of the multisection is equivalent to the divisor of $s$ viewed as a $d_1$-multisection, which is $d_1 D$.

Remark 2.14 In the case of the trivial bundle $\mathbb {C} E\times \mathbb {C} P^1$ sections are meromorphic functions. The statement then amounts to saying that the divisor of a meromorphic function is principal.

Imposing a tangency of order $i$ at a fixed point of $E_0$ (respectively, $E_\infty$) is a codimension $i$ condition, while imposing a tangency of order $i$ somewhere on $E_0$ (respectively, $E_\infty$) is codimension $i-1$. For the second enumerative problem, let $\mu _0+\nu _0\vdash \delta d_1+d_2$ and $\mu _\infty +\nu _\infty \vdash d_2$ be partitions. The number of solutions to the following enumerative problem counts curves with fixed tangency profile with the divisor $E_0+E_\infty$.

Problem 2.15 How many genus $g$ curves of bidegree $(d_1,d_2)$, have $\mu _{0i}$ (respectively, $\mu _{\infty i}$) intersection points of tangency order $i$ at fixed points of $E_0$ (respectively, $E_\infty$) and $\nu _{0i}$ (respectively, $\nu _{\infty i}$) more intersection of tangency order $i$ with $E_0$ (respectively, $E_\infty$) at non-fixed points, and pass through $|\nu _0|+|\nu _\infty |+g-1$ points in generic position in $\mathbb {C} X$?

As in the case of point constraints, the number of such curves does not depend either on the choice of the points as long as it is generic, the choice of the elliptic curve, and the choice of generic $\alpha \in \mathrm {Pic}^0(\mathbb {C} E)$ if $\delta =0$. The number of these curves is denoted by $N^{\delta,\mathrm {cpx},\bullet }_{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$ for the reducible count, and $N^{\delta,\mathrm {cpx}}_{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$ for the irreducible count.

3. Tropical line bundle over an elliptic curve

We now adapt the previous section to the tropical setting, defining the ruled surfaces over a tropical elliptic curve $\mathbb {T} E$ which are obtained from tropical line bundles. The reader is assumed to be familiar with some notions of tropical geometry. We refer to [Reference Brugallé and ShawBS14] for a introduction to tropical geometry, and to sections $3$ and $4$ of [Reference Mikhalkin and ZharkovMZ08] for more details on divisors and line bundles over tropical curves.

3.1 Total space of a tropical line bundle

3.1.1 Tropical elliptic curve

We take the following definition of a tropical elliptic curve.

Definition 3.1 A tropical elliptic curve $\mathbb {T} E$ is a quotient $\mathbb {R}/l\mathbb {Z}$ as a metric space, where $l$ is some positive real number.

As in the complex setting, tropical elliptic curves are also abelian groups. Topologically, a tropical elliptic curve is homeomorphic to $S^1$, just as any complex elliptic curve is homeomorphic to a torus $(S^1)^2$. Moreover, as complex elliptic curves are classified by a complex number $\tau$ (up to a ${\rm SL}_2(\mathbb {Z})$ action), tropical elliptic curves are classified by their length $l$.

3.1.2 The tropical cylinders

We adopt a construction mimicking the construction of line bundles over a complex torus done in [Reference Griffiths and HarrisGH14]. We consider the $\mathbb {Z}$-action on $\mathbb {R}^2$ generated by the following affine diffeomorphism:

\[ \varphi:(x,y)\longmapsto(x+l,y+\delta x-\alpha), \]

where $\delta \in \mathbb {Z}$ and $\alpha \in \mathbb {R}$. The diffeomorphism is an affine map whose linear part lies in ${\rm GL}_2(\mathbb {Z})$. Thus, the quotient space inherits a lattice structure from the standard lattice structure of $\mathbb {R}^2$. As the action onto the first coordinate is just a translation, projecting onto the first coordinate, we get a map

\[ \mathbb{R}^2/\langle\varphi\rangle\longrightarrow\mathbb{R}/l\mathbb{Z}. \]

This maps makes the quotient space $\mathbb {R}^2/\langle \varphi \rangle$ into a $\mathbb {R}$-bundle over the tropical elliptic curve $\mathbb {T} E=\mathbb {R}/l\mathbb {Z}$.

Remark 3.2 Changing $\mathbb {R}^2$ with $\mathbb {R}\times \mathbb {T}$ (where $\mathbb {T}=\mathbb {R}\cup \{-\infty \}$) or $\mathbb {R}\times \mathbb {T} P^1$ (where $\mathbb {T}=\mathbb {R}\cup \{-\infty,+\infty \}$) with the same action, we would get a line bundle or $\mathbb {T} P^1$-bundle over the elliptic curve $\mathbb {R}/l\mathbb {Z}$. This corresponds to the construction of [Reference Griffiths and HarrisGH14] leading to a $\mathbb {C}^*$, $\mathbb {C}$ or $\mathbb {C} P^1$-bundle according to the fiber that we choose.

Up to reversing the vertical direction inside $\mathbb {R}^2$, we can assume that $\delta \geqslant 0$. Then we have the following.

  • If $\delta >0$, using a horizontal translation inside $\mathbb {T} E$ and $\mathbb {R}^2$, one can assume that $\alpha =0$. The total space is denoted by $\mathbb {T} X_\delta$, and we write $\varphi _\delta :(x,y)\mapsto (x+l,y+\delta x)$ when necessary.

  • If $\delta =0$, using a basis of the form $(e_1+ke_2,e_1)$ for some $k\in \mathbb {Z}$ instead of the canonical basis of $\mathbb {R}^2$, the parameter $\alpha$ of the translation $\varphi$ becomes $\alpha -kl$. Thus, one can assume that $0\leqslant \alpha < l$. The total space is denoted by $\mathbb {T} X_{0,\alpha }$, and we write $\varphi _{0,\alpha }:(x,y)\mapsto (x+l,y-\alpha )$ when necessary. The parameter $\alpha$ can thus be seen as an element of $\mathbb {T} E$.

Topologically, the spaces that we obtain are cylinders. They differ by the lattice structure that they inherit from the standard lattice structure of $\mathbb {R}^2$.

Remark 3.3 One other way to obtain the cylinders would be the following. Consider a cover of $\mathbb {T} E=\mathbb {R}/l\mathbb {Z}$ by open set $(U_i)$, and a cocycle of affine functions on $U_i\cap U_j$, thus defining a tropical line bundle. Then glue the trivial bundles $U_i\times \mathbb {R}$ (respectively, $U_i\times \mathbb {T}$, $U_i\times \mathbb {T} P^1$) together over the $U_i\cap U_j$ using the cocycle. This constructs the total space of the $\mathbb {R}$-bundle (respectively, line bundle, $\mathbb {T} P^1$-bundle).

Concretely, taking a fundamental domain, the cylinders $\mathbb {T} X$ can be seen as follows.

  • If $\delta >0$, the cylinder $\mathbb {T} X_\delta$ is the quotient of the strip $[0;l]\times \mathbb {R}$ by the identification of both sides: $(0,y)\sim (l,y)$, but the lattice structure has monodromy $\bigl (\begin {smallmatrix} 1 & 0 \\ -\delta & 1 \\ \end {smallmatrix}\bigr )$: a straight line having slope $(1,p)$ crossing the right side of the strip comes back from the left side with slope $(1,p-\delta )$.

  • If $\delta =0$, the cylinder $\mathbb {T} X_{0,\alpha }$ is obtained identifying both sides of the strip $[0;l]\times \mathbb {R}$ by a translation: $(0,y)\sim (l,y-\alpha )$. The slope of a line crossing the boundary does not change.

We refer to the next section for pictures of the cylinders with curves inside it, making the lattice structure explicit.

3.2 Tropical curves in $\mathbb {T} X$

3.2.1 Abstract tropical curves

An irreducible abstract tropical curve is a connected metric graph with unbounded edges called ends that have infinite length. The number of neighbours of a vertex of $\Gamma$ is called its valence. Edges adjacent to vertices of valence $1$ are required to have infinite length, and we remove the $1$-valent vertices from $\Gamma$. The other edges are required to have finite length and are called bounded edges. The genus of an abstract tropical curve is defined by $g=1-\chi (\Gamma )$. As $\Gamma$ is connected, it is equal to its first Betti number.

Remark 3.4 Due to the enumerative problem that we study, the tropical curves considered in the paper do not have genus at their vertices and we do not include that in the definition. Such a generalization would be needed if one tried to consider descendant invariants, for instance, as in [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21].

3.2.2 Parametrized tropical curves

In all what follows, $\mathbb {T} X$ is assumed to be either some $\mathbb {T} X_\delta$, or some $\mathbb {T} X_{0,\alpha }$.

Definition 3.5 A parametrized tropical curve inside $\mathbb {T} X$ is a map $h:\Gamma \to \mathbb {T} X$ where $\Gamma$ is an abstract tropical curve, and:

  • $h$ is affine with integer slope on the edges of $\Gamma$;

  • at each vertex, one has the balancing condition that the sum of the outgoing slopes of $h$ is $0$.

Here, integer slope means that the slope of $h$ belongs to the tangent lattice. Concretely, drawing the curve inside $[0;l]\times \mathbb {R}$, it means that the derivative lies in $\mathbb {Z}^2$. The weight of an edge $e$ is the integer length of the slope of $h$ on $e$, which does not depend on the chosen chart. As the vertical direction $(0,1)$ is unchanged by the transition maps, we can speak about the vertical direction.

3.3 Cutting procedure

Before getting to the notion of bidegree of a tropical curve in $\mathbb {T} X$ and some examples, we explain how to relate tropical curves in $\mathbb {T} X$ to tropical curves in $\mathbb {R}^2$.

3.3.1 Relation to tropical curve in $\mathbb {R}^2$

Each cylinder is obtained as a quotient of $\mathbb {R}^2$ by a $\mathbb {Z}$-action. The action is generated by $\varphi _{0,\alpha }:(x,y)\mapsto (x+l,y+\alpha )$ in the case of $\mathbb {T} X_{0,\alpha }$, and by $\varphi _\delta :(x,y)\mapsto (x+l,y+\delta x)$ in the case of $\mathbb {T} X_\delta$. We just denote it by $\varphi$. The projection $\mathbb {R}^2\to \mathbb {T} X=\mathbb {R}^2/\langle \varphi \rangle$ is a covering map. It is not possible to lift right away tropical curves inside $\mathbb {T} X$ to tropical curves inside $\mathbb {R}^2$. We explain how to do so by ‘cutting’ the curve inside $\mathbb {T} X$.

Let $h:\Gamma \to \mathbb {T} X$ be a parametrized tropical curve. Let $\mathcal {Q}\subset \Gamma$ be a set of points located on the edges such that $\Gamma -\mathcal {Q}$ is connected and without cycles. For each point $q\in \mathcal {Q}$, $(\Gamma -\mathcal {Q})\cup \{q\}$ contains a unique loop. Let $\lambda _q\in \pi _1(\mathbb {T} X)\simeq \mathbb {Z}$ be the homotopy class realized by the loop inside $\pi _1(\mathbb {T} X)\simeq \mathbb {Z}$. Let $\mathcal {Q}'=\{q\in \mathcal {Q}:\lambda _q\neq 0\}$. The set $\mathcal {Q}'$ is called admissible: it is a minimal set of points such that $\Gamma -\mathcal {Q}'$ is connected, and its image contractible inside $\mathbb {T} X$.

Now, let $\Gamma '$ be the abstract tropical curve where the points from $\mathcal {Q}'$ have been removed and the edges containing a point from $\mathcal {Q}'$ have been replaced by a pair of unbounded ends. As the image of $\pi _1(\Gamma -\mathcal {Q}')$ is trivial, it is possible to lift $h|_{\Gamma -\mathcal {Q}'}$ into a map $\Gamma -\mathcal {Q}'\to \mathbb {R}^2$. Extending to infinity the edges obtained by removing points from $\mathcal {Q}'$, we get a parametrized tropical curve $h':\Gamma '\to \mathbb {R}^2$ of genus $g(\Gamma )-|\mathcal {Q}'|$. Moreover, from $\mathcal {Q}'$, each non-vertical end gets a marked point. Furthermore, ends are paired together according to the point $q\in \mathcal {Q}'$ they contain. For each pair of ends $\{e,e'\}$ containing marked points $q_e,q_{e'}\in \mathbb {R}^2$, small neighbourhoods of $q_e$ and $q_{e'}$ inside $e$ and $e'$, respectively, have the same image under $\mathbb {R}^2\to \mathbb {T} X$.

Conversely, take a parametrized tropical curve $h':\Gamma '\to \mathbb {R}^2$ with this additional data and assumption: each non-vertical unbounded end contains a marked point, they are paired together, and have the same projection under $\mathbb {R}^2\to \mathbb {T} X$ near their marked point. Then we get a parametrized tropical curve $h:\Gamma \to \mathbb {T} X$: it suffices to remove the non-vertical unbounded ends until their marked point, and project into $\mathbb {T} X$. One can merge the marked points two by two, and the assumption ensures that the balancing condition is satisfied. The obtained tropical curve is of genus $g(\Gamma ')$ plus the number of pairs.

Remark 3.6 In concrete terms, the cutting procedure just consists of cutting the curve so that a lift is possible, and then unfold the curve to the universal cover, extending the cut edges to unbounded ends.

Example 3.7 In Figure 1 there are two examples of tropical curves inside some $\mathbb {T} X_{0,\alpha }$ and $\mathbb {T} X_1$, respectively, with an admissible set of points, and the corresponding tropical curve inside $\mathbb {R}^2$. In Figure 1(a), the map $\varphi$ is just a translation. The points denoted by ‘$\oplus$’ are identified by $\varphi$, and the points denoted by ‘$\times$’ are identified by $\varphi ^2$. In Figure 1(b), note that the map $\varphi$ is now a shear transformation that changes non-vertical slopes.

Figure 1. Examples of application of the cutting process for a curve inside $\mathbb {T} X_{0,\alpha }$ in (a) and in $\mathbb {T} X_1$ for (b).

Finally, we note that a deformation of $h:\Gamma \to \mathbb {T} X$ with a choice of admissible set $\mathcal {Q}'$ leads to a deformation of the cut curve $h':\Gamma '\to \mathbb {R}^2$ provided the points of $\mathcal {Q}'$ never collide with a vertex. Conversely, a deformation of $h':\Gamma '\to \mathbb {R}^2$ with the marked points on non-vertical ends that continue to match the conditions induce a deformation of $h:\Gamma \to \mathbb {T} X$ provided the marked points never collide with vertices.

3.3.2 Menelaus relation

We have the following result that is the tropical analogue of Proposition 2.13.

Theorem 3.8 Let $h:\Gamma \to \mathbb {T} X$ be a parametrized tropical curve of bidegree $(d_1,d_2)$ inside the total space of a line bundle $\mathcal {L}_D$ for some divisor $D$. Let $x_i\in E$ be the projection of the unbounded ends of $\Gamma$, with weight $w_i$, which is chosen with a sign such that it is positive or negative according to whether it is oriented up or down. Then the divisor $\sum w_i x_i$ is equivalent to $d_1 D$.

Proof. Assume $\delta \neq 0$ and that $D=(0,\delta )\in E\times \mathbb {Z}$, so that the description of $\mathbb {T} X$ is given in the preceding section. Apply the cutting procedure to get a tropical curve $\widetilde {h}:\widetilde {\Gamma }\to \mathbb {R}^2$. According to the tropical Menelaus theorem [Reference MikhalkinMik17], we know that the sum of the moments of the coordinates of the unbounded ends is $0$, where the moment of an unbounded end of slope $(u,v)$ is the evaluation of $\det ((u,v),-)$ at any of its points.

Let $x_i$ be the abscissa of the unbounded ends of $\Gamma$, with $w_i$ their respective weight, which is positive or negative according to whether the end points up or down. Let $(l,y_j)$ be the intersection points between $\Gamma$ and the component of the boundary of the strip which is on the right, and $(u_j,v_j)$ the slope of $h$ at the point. The slope at the corresponding point $(0,y_j)$ on the left is $(-u_j,\delta u_j-v_j)$. The moment of $\widetilde {\Gamma }$ at these points are $u_jy_j-v_jl$ and $-u_jy_j$, respectively. First, the balancing condition guarantees that $\sum w_i=\delta d_1$, which is the degree of $d_1 D$. By tropical Menelaus theorem in the plane, we get that

\[ \sum w_i x_i=-\sum_j (u_jy_j-v_jl-u_jy_j)\equiv 0\mod l. \]

If $\delta =0$, we are inside $\mathbb {T} X_{0,\alpha }$ and the points which are identified are $(l,y_j)$ and $(0,y_j+\alpha )$. Thus, the moments become $u_jy_j-v_jl$ and $-u_jy_j-u_j\alpha$, respectively. We get

\[ \sum w_i x_i\equiv \alpha\sum u_j\mod l, \]

which yields the result since $\sum u_j=d_1$. For other line bundles $\mathcal {L}_D$ and other divisors $D$, the result follows by translation.

Remark 3.9 Similarly to the tropical Menelaus in the plane, Theorem 3.8 tells us that there is a relation between the position of the unbounded ends of a curve, and they cannot be chosen freely. The equality is only mod $l$ because the coordinates are numbers in $\mathbb {R}/l\mathbb {Z}$.

3.4 Bidegree of parametrized tropical curves and examples

Definition 3.10 We say that a parametrized curve $h:\Gamma \to \mathbb {T} X$ is of bidegree $(d_1,d_2)$ if it has $d_2$ unbounded edges (counted with weight) going to the top vertical direction, and $d_1$ intersection points (counted with multiplicity equal to the absolute value of the horizontal coordinate of their slope) with a generic vertical line.

Let $h:\Gamma \to \mathbb {T} X$ and $h':\Gamma '\to \mathbb {T} X$ be two parametrized tropical curves of respective bidegrees $(d_1,d_2)$ and $(d'_1,d'_2)$. Assume they are transverse to each other. For any intersection point $p$ of $\Gamma$ and $\Gamma '$, the intersection index $|{\det (\partial _p h,\partial _p h')}|$ is well-defined since it does not depend on the choice of the integer affine chart of $\mathbb {T} X$. Thus, we can speak of the intersection index between $\Gamma$ and $\Gamma '$ at $p$, and define their intersection number by adding the contributions of the various intersection points. Using the balancing condition, similarly to the tropical Bézout theorem in the plane, we get that the intersection number only depends on the bidegrees of the two curves, and is equal to $\delta d_1 d'_1+d_1 d'_2+d_2 d'_1$. Therefore, the bidegree of a curve is defined by its intersection number with the $\infty$-section and the class of the fiber. The balancing condition ensures that it does not depend on the chosen vertical fiber.

Remark 3.11 Alternatively, one could consider the classes realized by the parametrized tropical curve $h:\Gamma \to \mathbb {T} X$ inside the tropical homology group $H_{1,1}(\mathbb {T} X,\mathbb {Z})$. To do this one should consider the compact space that is a $\mathbb {T} P^1$-bundle over $\mathbb {T} E$ rather than a $\mathbb {R}$-bundle. The homology group is then generated by the class $F$ of a fiber, which is a vertical line, and some section, for instance the $0$-section, represented by the bottom boundary component of the cylinder. A curve is of bidegree $(d_1,d_2)$ if it realizes the class $d_1 E_0+d_2 F$.

Lemma 3.12 Counted with multiplicity, a curve of bidegree $(d_1,d_2)$ has $\delta d_1+d_2$ (counted with weights) unbounded ends in the direction $(0,-1)$.

Proof. It is just the intersection number of the curve with the class of the $0$-section. Alternatively, use the cutting procedure from § 3.3 to get a tropical curve inside $\mathbb {R}^2$. The balancing condition ensures that the sum of the outgoing slopes of the unbounded ends add up to $0$. there are by assumption $d_2$ ends in the direction $(0,11)$. The ends on the right have slope $(u_i,v_i)$, with $\sum u_i= d_1$, and each one of them is associated to an end on the left with slope $(-u_i,\delta u_i-v_i)$. Thus, all add up to $(0,\delta \sum u_i)=(0,\delta d_1)$. The result follows.

We now define the tangency profile of a parametrized tropical curve of bidegree $(d_1,d_2)$.

Definition 3.13 Let $\|\mu _0\|= \delta d_1+d_2$ and $\|\mu _\infty \|= d_2$ be partitions. A parametrized tropical curve of bidegree $(d_1,d_2)$ is said to have ramification profile $(\mu _0,\mu _\infty )$ if it has $\mu _{0i}$ ends of slope $(0,-i)$, and $\mu _{\infty i}$ ends of slope $(0,i)$.

3.5 Examples of tropical curves in cylinders

We now give several examples and illustrations of tropical curves living in the spaces $\mathbb {T} X_{0,\alpha }$, $\mathbb {T} X_1$ and $\mathbb {T} X_2$.

Example 3.14

  • The tropical graph of a section of the line bundle realizes the class $E_0$. It has exactly one intersection point with every fiber, $\delta$ unbounded ends going down, and none going up. By tropical graph, we mean the usual graph with vertical ends added at each corner point so that the balancing condition is satisfied.

  • The tropical graph of a meromorphic section of the line bundle realizes the class $E_0+d_2 F$, where $d_2$ is the number of poles of the section.

Example 3.15 In Figure 2 one can see three examples of tropical curves inside the total space of a degree $0$ line bundle. The pictures are drawn inside the strip $[0;l]\times \mathbb {R}$ both whose sides are identified.

  • The examples in Figures 2(a) and (b) take place in the trivial bundle $\mathbb {T} E\times \mathbb {R}$ and depict two genus $1$ curves of respective bidegrees $(2,2)$ and $(1,2)$.

  • In Figure 2(c) a genus $1$ and bidegree $(1,1)$ curve is drawn in some $\mathbb {T} X_{0,\alpha }$ for some non-zero $\alpha$. The identification between the two sides is done with some vertical translation.

Both examples (Figures 2b and c) can be seen as tropical graphs of meromorphic sections of the respective line bundles. Note here, that, the slope does not change when crossing the boundary and coming back from the other side.

Figure 2. Examples of tropical curves (a) and (b) inside $\mathbb {T} E\times \mathbb {R}$ and (c) inside $\mathbb {T} X_{0,\alpha }$ for some non-zero $\alpha$.

Example 3.16 In Figure 3 we draw two sections of a degree $1$ bundle $\mathbb {T} X_1$.

  • In Figure 3(a), we draw a curve if we did not make the assumption that the translation parameter is $0$, so that the identification between the two sides of the strip is done with a non-zero vertical translation. The slope changes when the boundary is crossed since the left and right small strips between the whole and dotted lines are identified.

  • In Figure 3(b), we make the assumption that the translation parameter is $0$. However, we still have a change of slope when crossing the boundary of the chart. As a consequence, the unique end and the unique vertex live on the boundary of the chart. One can check that the balancing condition is indeed satisfied.

Figure 3. Examples of sections inside $\mathbb {T} X_1$. In (a), the chart has not been chosen so that points having the same height get identified. In (b) it is the case.

Example 3.17 In Figure 4, we draw a genus $1$ bidegree $(1,2)$, a genus $2$ bidegree $(2,2)$ curve in $\mathbb {T} X_1$ and a genus $1$ bidegree $(1,0)$ curve inside $\mathbb {T} X_2$. On can still observe the change of slope when an edge crosses the boundary. In the case of $\mathbb {T} X_1$, an edge of slope $1$ which crosses the boundary on the right comes back from the left with slope $0$. In the case of $\mathbb {T} X_2$, and edge of slope $1$ which crosses on the right comes back on the left with new slope $-1$.

Figure 4. Examples of tropical curves (a) and (b) inside $\mathbb {T} X_1$ and (c) in $\mathbb {T} X_2$.

Example 3.18 Note that in the case of $\mathbb {T} X_{0,\alpha }$, if $\alpha \in \mathbb {Q} l$, there exist curves that do not intersect $E_0$ nor $E_\infty$. They are elliptic curves that go around the cylinder direction at least once with the right slope. In Figure 5, the unique edge has slope $\frac {1}{2}$, and the two sides of the strip are identified with a translation by $l/2$. Those curves are superabundant. Such curves are called superabundant loops. They are characterized in Proposition 4.2.

Figure 5. Example of a superabundant loop inside $\mathbb {T} X_{0,l/2}$.

4. Enumerative problems and tropical invariants

4.1 Enumerative problems

Let $\mathcal {M}_{g,n}(\mathbb {T} X,(d_1,d_2),\mu _0,\mu _\infty )$ be the moduli space of irreducible parametrized tropical curves of genus $g$, bidegree $(d_1,d_2)$, tangency profile $(\mu _0,\mu _\infty )$, with $n$ marked points. A curve in $\mathcal {M}_{g,n}(\mathbb {T} X,(d_1,d_2),\mu _0,\mu _\infty )$ has exactly $|\mu _0|+|\mu _\infty |$ ends. Assuming the curve is trivalent, it has exactly $3g-3+|\mu _0|+|\mu _\infty |+n$ bounded edges. The $g$ cycles of the graph give $2g$ conditions on the lengths of the bounded edges. Adding the translation, we get an expected dimension of

\[ \dim\mathcal{M}_{g,n}(\mathbb{T} X,(d_1,d_2),\mu_0,\mu_\infty)= |\mu_0|+|\mu_\infty|+g-1+n. \]

It is possible that some combinatorial types vary in a space whose dimension is strictly bigger than the expected dimension. This happens when the cycles do not impose independent conditions on the edge lengths. Such combinatorial types are called superabundant. However, as in the planar case handled in [Reference MikhalkinMik05], it can be shown that they do not contribute any solution to the enumerative problems, and one can thus restrict to the space of simple tropical curves defined in the following, which vary in a space of the expected dimension. In our problem, the only superabundant curves that may appear are superabundant loops from Example 3.18. Those are handled using Proposition 4.2.

Definition 4.1 We say that the combinatorial type of a parametrized tropical curve $h:\Gamma \to \mathbb {T} X$ is simple if $\Gamma$ is trivalent and $h$ is an immersion.

The fact that $h$ is an immersion means that the parametrized curve $h:\Gamma \to \mathbb {T} X$ cannot have any edge mapped to a point, nor a flat vertex, i.e. a vertex whose adjacent edges are all mapped to a line.

Proposition 4.2 Let $\mathbb {T} X$ be a tropical cylinder that contains a tropical curve $h:\Gamma \to \mathbb {T} X$ that has no unbounded end and for which $h$ is an immersion. Then, $\mathbb {T} X$ is some $\mathbb {T} X_{0,\alpha }$ for $\alpha \in \mathbb {Q} l$, and $\Gamma$ is an elliptic curve mapped to $\mathbb {T} X_{0,\alpha }$ having constant slope proportional to $(l,-\alpha )$.

Proof. Assume $h:\Gamma \to \mathbb {T} X$ of bidegree $(d_1,d_2)\neq (0,0)$ has no unbounded end. We thus have $d_2=0$ since it has no top ends, and $\delta =0$ since the curve has $\delta d_1$ lower ends and $d_1\neq 0$. Thus, $\mathbb {T} X$ is some $\mathbb {T} X_{0,\alpha }$.

Then, apply the cutting procedure for some admissible set $\mathcal {Q}'$ to get a curve inside $\mathbb {R}^2$. The pairs of ends have slopes $\pm v_e$ for some $v_e\in \mathbb {Z}_{>0}\times \mathbb {Z}$, and the marked points on it differ by some integer multiple of $(l,-\alpha )$. For each pair of ends, let $(x_e,y_e)$ be the marked point from $\mathcal {Q}'$ on the end directed by $-v_e$, and $(x_e+k_el,y_e-k_e\alpha )$ the point on the end directed by $v_e$, for some $k_e\in \mathbb {Z}$. Menelaus relation for $\Gamma '$ ensures that

\[ \sum_e \det(-v_e,(x_e,y_e))+\det(v_e,(x_e+k_el,y_e+k_e\alpha))=0. \]

Thus, $\det (\sum _e k_e v_e,(l,-\alpha ))=0$. As $\sum _e k_e v_e\in \mathbb {Z}_{>0}\times \mathbb {Z}$, we have that $(l,-\alpha )$ has rational slope and $\alpha \in \mathbb {Q} l$. In particular, $\mathbb {T} X_{0,\alpha }$ contains tropical elliptic curves going once around the cylinder direction: the superabundant loops of slope $(l,-\alpha )$ as in Example 3.18. These are parametrized by the coordinate of their intersection point with a fixed fiber.

To conclude, assume $\Gamma$ has at least one vertex. Consider a superabundant loop $\Upsilon$ of slope $(l,-\alpha )$ of highest coordinate that also passes through a vertex $V$ of $\Gamma$. It is possible since there are only a finite number of vertices in $\Gamma$. Not all the adjacent edges of $\Gamma$ to $V$ can be contained in the same line since $h$ is an immersion. But if some edge does not have slope $(l,-\alpha )$, by balancing condition, there is at least one edge that goes above $\Upsilon$, and as $\Gamma$ has no unbounded ends, it has to meet another vertex $W$. A superabundant loop passing through $W$ would be higher than $\Upsilon$, contradicting the assumption on the choice of $\Upsilon$. Thus, all the edges of $\Gamma$ are contained in $\Upsilon$. As $h$ is an immersion, $\Gamma$ has no vertices. It is thus of genus $1$ and is a superabundant loop.

Remark 4.3 Assuming that $\alpha \notin \mathbb {Q} l$ ensures that there are no superabundant loops. If $(d_1,d_2)$ is fixed, it is only sufficient to assume that $\alpha \notin ({1}/{d_1!})\mathbb {Z} l$ to ensure that curves of bidegree $(d_1,d_2)$ cannot have any irreducible component being a superabundant loop.

We have the following evaluation map:

\[ \begin{array}{rccl} \mathrm{ev} & : \mathcal{M}_{g,n}(\mathbb{T} X,(d_1,d_2),\mu_0,\mu_\infty) & \longrightarrow & \mathbb{T} X^n \\ & (\Gamma,h,x_1,\ldots,x_n) & \longmapsto & (h(x_1),\ldots,h(x_n)), \\ \end{array} \]

that sends a parametrized curve to the position of its marked points. It is also possible to evaluate the position of some unbounded ends, and the evaluation map then takes values inside $\mathbb {T} X^n\times \mathbb {T} E^m$, where $m$ is the number of evaluated ends.

The following proposition computes the dimension of the moduli space of curves, throwing away the case where superabundant loops occur.

Proposition 4.4 Assume $\mathbb {T} X$ is some $\mathbb {T} X_\delta$ or some $\mathbb {T} X_{0,\alpha }$ for $\alpha \notin \mathbb {Q} l$. The dimension of the subspace of $\mathcal {M}_{g,n}(\mathbb {T} X,(d_1,d_2),\mu _0,\mu _\infty )$ parametrizing the curves having a simple combinatorial type is $|\mu _0|+|\mu _\infty |+g-1$. For combinatorial types where $\Gamma$ is not trivalent anymore but $h$ is still an immersion, the dimension is strictly less.

Proof. Assume $h:\Gamma \to \mathbb {T} X$ is simple. Using the cutting procedure with an admissible set $\mathcal {Q}'$, we get a curve $h':\Gamma '\to \mathbb {R}^2$ with a pairing between the non-vertical ends. The deformations of $h:\Gamma \to \mathbb {T} X$ correspond to deformations of $h':\Gamma '\to \mathbb {R}^2$ that keep satisfying the gluing condition from the cutting procedure: paired ends coincide under the projection $\mathbb {R}^2\to \mathbb {T} X$. Recall that for an end with outing slope $u_e\in \mathbb {Z}^2$, its moment $\mu _e$ is $\det (u_e,P)$, where $P$ is any point on $e$, e.g. $q_e$ from the cutting process. The gluing condition amounts to find deformations of $h:\Gamma '\to \mathbb {R}^2$ such that for each pair $\{e,e'\}$ the quantity $\mu _e+\mu _{e'}$ remains constant.

The moments satisfy the Menelaus relation: $\sum _e\mu _e=0$. It is, in fact, the only relation between them: if we had another relation, we could use both relations to get a relation not involving all the moments. Then, let $e_0$ be one of the end not involved in the relation. For each other end $e\neq e_0$, as $\Gamma '$ is trivalent, it is possible to deform a path from $e_0$ to $e$. This changes the value of $\mu _e$ and $\mu _{e_0}$ but not for any other end, preventing a relation not involving all the ends to exist.

To conclude, according to [Reference MikhalkinMik05], $h':\Gamma '\to \mathbb {R}^2$ varies in a space of dimension $|\mu _0|+|\mu _\infty |+2|\mathcal {Q}'|+g(\Gamma ')-1$. Thanks to Proposition 4.2, there is at least one vertical unbounded end. The gluing condition thus impose $|\mathcal {Q}'|$ independent conditions. As $g(\Gamma )=g(\Gamma ')+|\mathcal {Q}'|$, we get the result for simple combinatorial types.

We now assume that $h$ is still an immersion but $\Gamma$ is not trivalent anymore. Furthermore, we can assume that no vertex can be split into two vertices adding an edge of slope $0$: if it were the case, we could split the vertex $V$ into $V_1$ and $V_2$ adding an artificial bounded edge of slope $0$ and then delete it. The vertices $V_1$ and $V_2$ are still vertices of the new curve after the splitting, or might become marked points, if they were not at least trivalent. We would get into one of the following situations.

  • If the edge was disconnecting, we now have two simple tropical curves $h_j:\Gamma _j\to \mathbb {T} X$ and genus $g_j$ of smaller degree with tangency profile $(\mu _0^j,\mu _\infty ^j)$, for $j=1,2$. By induction on the degree, we can assume they vary in a space of respective dimension at most ${|\mu _0^j|+|\mu _\infty ^j|+g_j-1}$. Deformations of $\Gamma$ are obtained by taking deformations of $\Gamma _1$ and $\Gamma _2$ mapping $V_1$ and $V_2$ to the same image. Thus, as $g=g_1+g_2$, $\Gamma$ varies in a space of dimension at most

    \[ |\mu_0|+|\mu_\infty|+g-2<|\mu_0|+|\mu_\infty|+g-1. \]
  • If the edge is not disconnecting, we get a new parametrization of the image of $\Gamma$ by a simple tropical curve $\widetilde {h}:\widetilde {\Gamma }\to \mathbb {T} X$ which is of genus $g-1$. Deformations of $\Gamma$ are the deformations of $\widetilde {\Gamma }$ that map $V_1$ and $V_2$ to the same image. By induction, we can still assume that it varies in a space of dimension at most

    \[ |\mu_0|+|\mu_\infty|+(g-1)-1<|\mu_0|+|\mu_\infty|+g-2. \]

Therefore, we can assume no vertex can be split. Then, it is possible to find a one-parameter family deforming $\Gamma$ into a nearby simple tropical curve: for any non-trivalent vertex, choose a loop or a string between two unbounded ends and deform it, and continue for each remaining non-trivalent vertex. Thanks to the assumption on vertices, no cycle or string can arrive at a vertex and leave with the same slope, so each deformation deletes at least one non-trivalent vertex. If the dimension of the deformation space of $h:\Gamma \to \mathbb {T} X$ was at least $|\mu _0|+|\mu _\infty |+g-1$, this nearby simple tropical curve would vary in a space of dimension at least one more (using the deformation provided by the one parameter family), which contradicts the dimension count for simple tropical curves.

Remark 4.5 The proof of the statement concerning non-trivalent tropical curves can be seen as follows: the moduli space $\mathcal {M}_{g,n}(\mathbb {T} X,(d_1,d_2),\mu _0,\mu _\infty )$ is a polyhedral complex, and cells corresponding to non-trivalent curves are faces of cells corresponding to simple combinatorial types, thus of strictly smaller dimension.

Remark 4.6 Using Proposition 4.2, the restriction to $\mathbb {T} X$ being $\mathbb {T} X_\delta$ or $\mathbb {T} X_{0,\alpha }$ for $\alpha \notin \mathbb {Q} l$ prevents the appearance of superabundant loops. The latter are genus $1$ curve without unbounded ends that yet vary in a $1$-dimensional space: they are superabundant. The proof and statement of Proposition 4.4 can be adapted to work in the setting of $\mathbb {T} X_{0,\alpha }$ when $\alpha \in \mathbb {Q} l$. The dimension count for simple combinatorial types is still valid, except when there are no ends: Proposition 4.2 then ensures that the curve is a superabundant loop that varies in a $1$-dimensional space.

Now, the only difference is that when $\Gamma$ is not trivalent anymore, we need to take the following case into account: when splitting the vertices of $\Gamma$ that can be split in a way that disconnects $\Gamma$ into $\Gamma _1$ and $\Gamma _2$, one of the component might have no ends, and thus become a superabundant loop according to Proposition 4.2. Assume $\Gamma _2$ is the superabundant loop. Then the dimension of the space in which $\Gamma$ varies is equal to the dimension in which $\Gamma _1$ varies if $V_1$ is a vertex of $\Gamma _1$, or plus one if $V_1$ is not a vertex of $\Gamma _1$ (meaning $V$ was a quadrivalent vertex). Thus, the combinatorial types that vary in a space of dimension $|\mu _0|+|\mu _\infty |+g-1$ are the simple ones, that may additionally have superabundant loops attached to edges.

Unless stated otherwise, we consider $\mathbb {T} X$ as in the assumption of Proposition 4.4 so that there are no superabundant loops. We then consider the following enumerative problems.

Problem 4.7 How many parametrized tropical curves of bidegree $(d_1,d_2)$ and genus $g$ pass through $\delta d_1+2d_2+g-1$ points in generic position?

Let $\|\mu _0\|+\|\nu _0\|=\delta d_1+d_2$ and $\|\mu _\infty \|+\|\nu _\infty \| =d_2$ be partitions.

Problem 4.8 How many parametrized tropical curves of bidegree $(d_1,d_2)$, ramification profile $(\mu _0+\nu _0,\mu _\infty +\nu _\infty )$ and genus $g$ have $\mu _{0i}$ unbounded ends of slope $(0,-i)$ and $\mu _{\infty i}$ unbounded ends of slope $(0,i)$ which are fixed, and pass through an additional set of $|\nu _0|+|\nu _\infty |+g-1$ points in generic position?

Both enumerative problem amount to find the preimages of a generic point configuration by the evaluation map.

4.2 Correspondence theorem

Unless stated otherwise, we consider $\mathbb {T} X$ as in the assumption of Proposition 4.4 so that there are no superabundant loops. First, we prove that the solutions to the preceding enumerative problems need to be simple tropical curves.

Lemma 4.9 If the point configuration $\mathcal {P}$ is generic, the tropical curves passing through $\mathcal {P}$ are simple and their number is finite.

Proof. We consider the moduli space $\mathcal {M}_{g,n}(\mathbb {T} X,(d_1,d_2))$, with $n=\delta d_1+2d_2+g-1$ marked points. The enumerative problem consists in finding the antecedent of a generic $\mathcal {P}\in \mathbb {T} X^n$ by the evaluation map. The moduli space is the union of a finite number of polyhedra corresponding to the possible combinatorial types. We want to prove that only the linear maps associated to simple combinatorial types are surjective.

If a combinatorial type does not correspond to an immersion, then, as in the planar case, it is possible to reparametrize the image by an immersion which is of strictly smaller genus or fewer ends. This is done by gluing the parallel adjacent edges, and deleting the contracted edges. Thus, we restrict to the immersed case.

If the combinatorial type corresponds to an immersion, we have seen that the dimension is as expected for a trivalent curve, and strictly less for a non-trivalent one, unless we are in presence of superabundant loops, but the assumption ensures that there are none. In particular, for the immersions of smaller genus or with fewer ends obtained from non-immersed curves, the dimension is also strictly less. Then the evaluation map cannot be surjective for these combinatorial types. The result follows.

We now count the solutions of the preceding enumerative problems with suitable multiplicities. For a simple tropical curve $h:\Gamma \to \mathbb {T} X$, the multiplicity of a vertex $V$ is $|{\det (a_V,b_V\!)}|$, where $a_V$ and $b_V$ are the slopes of two out of the three edges adjacent to $V$. The determinant can be taken in any affine chart of the manifold, since its value does not depend on this choice.

Definition 4.10 The multiplicity of a connected simple tropical curve $h:\Gamma \to \mathbb {T} X$ is

\[ m^\mathbb{C}_\Gamma=\prod_V m_V, \]

where the product runs over the trivalent vertices of $\Gamma$.

Remark 4.11 In the presence of superabundant loops, i.e. in $\mathbb {T} X_{0,\alpha }$ for $\alpha \in \mathbb {Q} l$, it is possible to define a multiplicity so that the count matches the count when $\alpha \notin \mathbb {Q} l$. It shall be obtained by deforming the parametrized tropical curve to a nearby generic $\alpha$. For instance, in Figure 6, a superabundant loop can be deformed in an edge of weight two going once around the cylinder, or twice with weight one.

Figure 6. A superabundant loop of weight $2$ and its deformations when changing the gluing parameter $\alpha$.

Let $\mathcal {P}\subset \mathbb {T} X$ be a generic configuration of $\delta d_1+2d_2+g-1$ points inside $\mathbb {T} X$. Let

\[ N^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mathcal{P})=\sum_{h(\Gamma)\supset\mathcal{P}} m_\Gamma^\mathbb{C}, \]

where the sum runs over the irreducible parametrized tropical curves $h:\Gamma \to \mathbb {T} X$ of bidegree $(d_1,d_2)$ and genus $g$ that pass through $\mathcal {P}$. The corresponding sum over the curves including the reducible ones is denoted by $N^{\delta,\mathrm {trop},\bullet }_{g,(d_1,d_2)}(\mathcal {P})$.

For the second enumerative problem, fix partitions $\mu _0$, $\mu _\infty$, $\nu _0$ and $\nu _\infty$ such that $\|\mu _0\|+\|\nu _0\|=\delta d_1+d_2$ and $\|\mu _\infty \|+\|\nu _\infty \|=d_2$. Let $\mathcal {P}$ be this time a configuration of $|\nu _0|+|\nu _\infty |+g-1$ points, for each $i$, $|\mu _{0i}|$ points on $E_0$ and $|\mu _{\infty i}|$ points on $E_\infty$. Let

\[ N^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mu_0,\mu_\infty, \nu_0,\nu_\infty)(\mathcal{P})=\frac{1}{I^{\mu_0}I^{\mu_\infty}} \sum_{h(\Gamma)\supset\mathcal{P}} m_\Gamma^\mathbb{C}, \]

where the sum runs over the irreducible parametrized tropical curves $h:\Gamma \to \mathbb {T} X$ satisfying the following.

  • They are of bidegree $(d_1,d_2)$, genus $g$ and tangency profile $(\mu _0+\nu _0,\mu _\infty +\nu _\infty )$.

  • They pass through $\mathcal {P}$.

  • For any $i$, the curve pass through each of the $\mu _{0i}$ (respectively, $\mu _{\infty i}$) marked points on $E_0$ (respectively, $E_\infty$) with an end of weight $i$.

The count including reducible curves is denoted with a $\bullet$.

Remark 4.12 In the degree $0$ case, the counts a priori depend on the (generic) choice of the cylinder $\mathbb {T} X$. In fact, it follows from Theorem 5.19 that it does not, so that the counts only depend on the cylinder through the degree $\delta$, and that is why only the latter is emphasized in the notation. This invariance can also be shown by deforming the gluing parameter $\alpha$.

We have the following correspondence theorem that relates the enumerative problems over $\mathbb {C} X$, and $\mathbb {T} X$.

Theorem 4.13

  • The count $N^{\delta,\mathrm {trop}}_{g,(d_1,d_2)}(\mathcal {P})$ does not depend on the choice of $\mathcal {P}$ as long as it is generic, and it is equal to $N^{\delta,\mathrm {cpx}}_{g,(d_1,d_2)}$ (respectively, with $\bullet$).

  • The count $N^{\delta,\mathrm {trop}}_{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )(\mathcal {P})$ does not depend on the choice of $\mathcal {P}$ as long as it is generic, and it is equal to $N^{\delta,\mathrm {cpx}}_{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$ (respectively, with $\bullet$).

Proof. For the curves which are not superabundant, the proof of this correspondence theorem follows exactly the same steps as other versions of the correspondence theorem that take place inside toric surfaces. This follows from the fact that it is possible to degenerate the surfaces $\mathbb {C} X$ into a union of toric surfaces glued over their toric divisors, and endow it with a smooth log structure. We explain the main steps and refer the reader to [Reference Nishinou and SiebertNS06] for more details.

The union of the images of all tropical curves passing through $\mathcal {P}$ induces a polyhedral subdivision of the strip $[0;l]\times \mathbb {R}$. Up to adding fibers to this union, we can assume that for each vertical edge in the subdivision, the whole vertical line containing it is in the subdivision. Using the $\mathbb {Z}$ action generated by the map $(x,y)\mapsto (x+l,y+\delta x)$, it extends periodically to a polyhedral subdivision $\Xi _1$ of $\mathbb {R}^2$. If $\delta =0$, the action is rather generated by $(x,y)\mapsto (x+l,y-\alpha )$. For any value of $(d_1,d_2)$, we can assume that $\alpha,l\in \mathbb {Q}$ but such that there are no superabundant loop of bidegree $(k,0)$ for any $k\leqslant d_1$. By periodically extending the subdivision of $[0;l]$, we also get a subdivision of $\mathbb {R}$. We consider the cones over both subdivisions.

  • The cone over the subdivision in $\mathbb {R}$ is a fan in $\mathbb {R}^2$ whose rays are generated by $(1,p_i)$, where $p_i$ is a point of the above subdivision of $\mathbb {R}$. It is denoted by $\Sigma$, and is depicted in Figure 7. The fan $\Sigma$ defines an almost toric variety $\mathcal {T}$: it is a partial compactification of $(\mathbb {C}^*)^2$ by a chain of $\mathbb {C} P^1$, glued along their toric boundary. The ‘almost toric’ is because the variety is not constructed from a finite fan. This non-finite fan projects to $\mathbb {R}_+$, giving a map from $\mathcal {T}$ to $\mathbb {C}$. The variety $\mathcal {T}$ is then fibered over $\mathbb {C}$, the special fiber being the chain of $\mathbb {C} P^1$.

    Figure 7. The fan $\Sigma$ defining the variety $\mathcal {T}$.

    The action of $\mathbb {Z}$ on $(\mathbb {C}^*)^2$ generated by the map $(t,z)\mapsto (t,a t^l z)$ descends to an action on the fan. The action on $\mathbb {R}^2$ is given by the following matrix:

    \[ \begin{pmatrix} 1 & 0 \\ l & 1 \\ \end{pmatrix}, \]
    i.e. the shear transformation of size $l$ parallel to the horizontal direction. Taking the quotient by the action, the quotient of $\mathcal {T}$ is a family of elliptic curves $\mathbb {C} E_t=\mathbb {C}^*/\langle a t^l\rangle$ that degenerates to the central fiber $\mathbb {C} E_0$, which is a chain of $\mathbb {C} P^1$ glued along their toric boundary. The difference is that the chain makes a cycle.
  • Similarly, we consider the cone over $\Xi _1$ gives a fan inside $\mathbb {R}^3$. A cone of $\Xi$ is generated by $(1,\sigma )$, where $\sigma$ is some cell of $\Xi _1$. The fan $\Xi$ defines an almost toric variety $\mathcal {T}'$ of dimension three. It is a partial compactification of $(\mathbb {C}^*)^3$ whose boundary consists of toric surfaces glued along their toric divisors.

    The fan $\Xi _1$ is mapped to $\Sigma$ by $(t,x,y)\mapsto (t,x)$. We consider the $\mathbb {Z}$-action on $(\mathbb {C}^*)^3$ generated by the map

    \[ (t,z,w)\longmapsto(t,a t^l z,z^\delta w). \]
    This action is compatible with the previous $\mathbb {Z}$-action on $(\mathbb {C}^*)^2$, and the projection $(t,z,w)\mapsto t$. The quotient of $\mathcal {T}'$ by the $\mathbb {Z}$-action is then a family $\mathcal {X}_t$ that admits a factorization $\mathcal {X}_t\to \mathbb {C} E_t$. This maps realizes $\mathcal {X}_t$ as a line bundle of degree $\delta$ over the elliptic curve $\mathbb {C} E_t$.

    The central fiber $\mathcal {X}_0$ is a union of toric surfaces glued along their toric boundary.

The previous description extends the setting of a degeneration of toric surfaces to a more general setting. It is possible to be more general by considering the quotient of $(\mathbb {C}^*)^3$ by a map $(t,z,w)\mapsto (t,a t^l z,b t^a z^\delta w)$, but up to a change of basis, we can assume that the map is of the assumed form. In the case of a degree $0$ line bundle, it is of the form

\[ (t,z,w)\mapsto(t,a t^l z,b t^{\alpha} w). \]

We have obtained a family of elliptic curves $\mathbb {C} E_t$ that degenerates to a union of $\mathbb {C} P^1$ glued over their toric divisors, and a degeneration of the degree $\delta$ line bundles over $\mathbb {C} E_t$ to a union of toric varieties glued over their toric divisors. We can now apply the method from [Reference Nishinou and SiebertNS06] to get a correspondence theorem. We refer the reader to it for more details. We summarize the main steps.

  • Endow the special fiber $\mathcal {X}_0$, which is a union of toric surfaces glued along their toric divisors, with a log-structure obtained from the toric construction.

  • Find the prelog curves in the special fiber $\mathcal {X}_0$, i.e. the reducible nodal curves that matches the point constraints. These curves are the limit curves of the families of curves inside $\mathcal {X}_t$ that match the constraints.

  • Given a prelog curve, find the possible log-structures on it so that they can be deformed to the general fiber.

The count of the solutions yields the expected multiplicity $m^\mathbb {C}_\Gamma =\prod m_V$. It is obtained as follows.

  • The complement of the marked points on a curve $\Gamma$ passing through $\mathcal {P}$ is a union of trees, each one possessing a unique unbounded end. Indeed, there are no cycles, otherwise the curve would vary in a one parameter family. Analogously, there are no components with at least two unbounded ends. Thus, there is exactly one unbounded end in each component.

  • When looking for the prelog curves, their search can be done by pruning the trees in the forest from the previous point. Each vertex provides ${m_V}/{w_{V1}w_{V2}}$ solutions, where $w_{VA}$ and $w_{V2}$ are the weights of the adjacent edges not in direction of the unbounded end of the tree.

  • The upgrading from prelog curves to log curves gives a $w$ factor for each edge of each tree. In particular, edges which are not marked contribute $w$, and edges marked $w^2$.

The product yields the expected multiplicity. The case of relative invariants is handled similarly. The difference is that we now may have tangencies with the toric divisors corresponding to the ends of the tropical curve and not only bounded edges. The count of prelog curves is the same, but we do not multiply anymore by $w$ when enhancing the prelog curves to log curves, yielding the expected multiplicity.

Remark 4.14 In the case of superabundant loops, the element $\alpha$ is torsion in $\mathrm {Pic}^0(E)$. It is also possible to find a correspondence theorem by choosing a family of line bundles that are also torsion in $\mathrm {Pic}(\mathbb {C} E)$. The correspondence works the same way for simple tropical curves. Superabundant loops might be dealt with separately, lifting them as elliptic curve inside $\mathbb {C} X_{0,\alpha }$.

Remark 4.15 In some sense, the proof of the correspondence theorem consists in observing that the proof from Nishinou and Siebert [Reference Nishinou and SiebertNS06] generalizes for non-superabundant tropical curves inside a family of varieties that degenerates to a union of toric varieties glued along their toric divisors, and not only toric ones. This approach is also used in [Reference NishinouNis20] for curves in abelian surfaces, with the crucial difference that in this case the curves are now all superabundant.

4.3 Refined enumeration

Following the correspondence theorem and the definition of the classical complex multiplicity, we set the following definition.

Definition 4.16 Let $h:\Gamma \to \mathbb {T} X$ be a simple irreducible parametrized tropical curve. Its refined multiplicity is defined as follows:

\[ m^q_\Gamma=\prod_V [m_V]_q\in\mathbb{Z}[q^{\pm 1/2}], \]

where $[a]_q=({q^{a/2}-q^{-a/2}})/({q^{1/2}-q^{-1/2}})$ denotes the $q$-analog of $a$.

For a generic choice of conditions $\mathcal {P}$ inside $\mathbb {T} X$, we can now make the count of tropical solutions using instead the refined multiplicity, getting Laurent polynomials

\begin{gather*} BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mathcal{P})=\sum_{h(\Gamma)\supset\mathcal{P}} m^q_\Gamma,\\ BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mu_0, \mu_\infty,\nu_0,\nu_\infty)(\mathcal{P})=\frac{1}{I_q^{\mu_0}I_q^{\mu_\infty}} \sum_{h(\Gamma)\supset\mathcal{P}} m^q_\Gamma, \end{gather*}

where $I_q^\mu =\prod [i]_q^{\mu _i}$. As usual, one can count reducible curves, and their count is denoted with a $\bullet$. We have the following invariance theorem.

Theorem 4.17 The refined count $BG^{\delta,\mathrm {trop}}_{g,(d_1,d_2)}(\mathcal {P})$ (respectively, $BG^{\delta,\mathrm {trop}}_{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$) does not depend on the choice of $\mathcal {P}$ as long as it is generic (respectively, with $\bullet$).

Proof. The proof reduces to the proof of invariance in [Reference Itenberg and MikhalkinIM13]. We consider a generic path $\mathcal {P}_s$ between two generic choices of point configuration $\mathcal {P}_0$ and $\mathcal {P}_1$. Given the assumption, there are no superabundant curves that can appear. Moreover, assume only one of the points moves: $p_s\in \mathcal {P}_s$.

We know that locally, a deformation of $p_s$ induces a deformation of the solutions, which have the same multiplicity since the latter is constant on the combinatorial types. We know that the complement of the marked points in any of the curves solution to the problem is a union of trees that each possess a unique unbounded end. Otherwise it would be possible to deform the curve in a one parameter family, contradicting the generic choice of the configuration. As the marked point $p_s\in \mathcal {P}_s$ moves, it is possible to deform any curve passing through $\mathcal {P}_s$. We have two possibilities:

  • both sides of the edge that $p_s$ splits belong to the same tree;

  • they belong to different components of $\Gamma \backslash h^{-1}(\mathcal {P}_s)$.

In the first case, only the unique path between both sides of the cut edge move. This is a cycle in $\Gamma$. Meanwhile in the second case, it is the path from the marked points to both unbounded ends in each tree that move. According to [Reference Itenberg and MikhalkinIM13], which uses Proposition 3.9 in [Reference Gathmann and MarkwigGM07b], the only possibilities that can occur when moving a point are:

  1. (a) the curve degenerates to a curve that has a quadrivalent vertex;

  2. (b) the curve degenerates to a curve with a vertex that coincides with a marked point;

  3. (c) the curve degenerates to a curve that has two quadrivalent vertices related by a pair of parallel edges.

In each case, the invariance of counts with refined multiplicity comes from [Reference Itenberg and MikhalkinIM13].

Remark 4.18 The only difference with the planar case is that if one of the marked points is the only marked point belonging to a cycle that is not homologically trivial in $\mathbb {T} X$, then the event (c) cannot occur. In fact, one can also use the cutting process to prove the invariance locally by reducing to the planar case from [Reference Itenberg and MikhalkinIM13].

Only the degree $\delta$ is emphasized in the notation of the invariants. If $\delta \neq 0$, it is because for each tropical elliptic curve $\mathbb {T} E$ there is a unique choice of surface $\mathbb {T} X_\delta$, and a scaling argument shows that the invariant does not depend on the choice of $\mathbb {T} E$ either. If $\delta =0$, the computation using floor diagrams proves that the count does not depend on the choice of $\mathbb {T} E$ nor $\alpha$ as long as the latter is chosen generically. This can also be done as follows: apply the cutting procedure to get inside $\mathbb {R}^2$, fix the configuration $\mathcal {P}$, and move the parameter of gluing $\alpha$ instead. The refined count does not depend on the choice of the constraints. The scaling argument takes care of the invariance with respect to $\mathbb {T} E$.

Remark 4.19 It is possible to extend the result to the case of $\mathbb {T} X_{0,\alpha }$ where there are superabundant loops, meaning that $\alpha$ is torsion. We have two possibilities:

  • either we treat curves with a superabundant loop as reducible curves, and we need to define a refined multiplicity whose value does not really matter since these curves are deformed separately;

  • or we define the multiplicity by slightly deforming the gluing parameter $\alpha$ and deforming the curves along with it.

In the first case we obtain an invariant for each surface $\mathbb {T} X_{0,\alpha }$ but that does depend on whether $\alpha$ is torsion or not. The second case corresponds to a way of counting curves so that the count does not depend on the choice of the parameter $\alpha$, even if it is torsion.

Concretely, the presence of superabundant loops makes appear reducible curves that would not appear otherwise. It is possible to make them into irreducible tropical curves as follows. Choose a parametrization of the reducible tropical curve by a disconnected graph. Each superabundant loop now corresponds to a circle. Choose an intersection point between the superabundant loop and the rest of the curve. Then, add an edge between the circle and the corresponding point on some other component of the parametrizing graph. The curve is irreducible but has a contracted edge. It is now possible to deform the curve when changing the gluing parameter $\alpha$. The deformation appears on Figure 6. The number of possibilities of deformations is exactly described by floor multiplicities.

5. Vertical floor diagrams

We now intend to provide an algorithm to compute the count of parametrized tropical curves of bidegree $(d_1,d_2)$ in $\mathbb {T} X$. This gives us the value of the invariants

\[ N^{\delta}_{g,(d_1,d_2)} \quad \text{and} \quad N^{\delta}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty), \]

as well as

\[ BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)} \quad \text{and} \quad BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty). \]

We now allow ourselves to remove the ‘cpx’ and ‘trop’ from the notation, since Theorem 4.13 states their equality. We start with the definition of a floor diagram, then we discuss how to construct a floor diagram from a tropical curve before giving the way to count the floor diagrams so that their count matches the previous invariants.

5.1 Floor diagrams

Definition 5.1 A floor diagram $\mathfrak {D}$ of bidegree $(d_1,d_2)$ in $\mathbb {T} X$ is an oriented weighted graph satisfying the following requirements:

  1. (a) the edges, called elevators have a weight $w_e\in \mathbb {N}$;

  2. (b) counted with weight, there are $\delta d_1+d_2$ unbounded elevators oriented inward, and $d_2$ oriented outward;

  3. (c) each vertex $\mathcal {F}$, called a floor, has a weight $w_\mathcal {F}\in \mathbb {N}$;

  4. (d) the sum of the weights of the floors is $d_1$;

  5. (e) there are no oriented cycles;

  6. (f) for a floor $\mathcal {F}$, its divergence $\mathrm {div} \mathcal {F}=\sum _{e\ni \mathcal {F}}\pm w_e$, with the sign of $\pm w_e$ being $+$ (respectively, $-$) if $e$ ends (respectively, starts) at $\mathcal {F}$, is equal to $\delta w_\mathcal {F}$.

The genus of $\mathfrak {D}$ is, by definition, its genus as an unoriented graph plus its number of floors. The partitions $\mu _0\vdash \delta d_1+d_2$ and $\mu _\infty \vdash d_2$ induced by the unbounded elevators are called the tangency profile of the floor diagram.

For a floor $\mathcal {F}$, its valency is equal to the number of elevators adjacent to it and is denoted by $\mathrm {val}(\mathcal {F})$.

Definition 5.2 Let $\mathfrak {D}$ be a floor diagram of bidegree $(d_1,d_2)$ and tangency profile $(\mu _0,\mu _\infty )$. A marking of $\mathfrak {D}$ is an increasing injection $\mathfrak {m}:[\![ 1;|\mu _0|+|\mu _\infty |+g(\mathfrak {D})-1]\!] \to \mathfrak {D}$, where points are sent either to a floor or to an elevator of $\mathfrak {D}$, endowed with the partial order induced by the orientation, and such that:

  • each floor $\mathcal {F}$ is marked by exactly one point;

  • each component of the complement of the markings on the elevators contains a unique unbounded elevator.

Remark 5.3 To handle solutions of the enumerative problem where we do not only have point constraints but conditions on the ends of the curves, in the previous definition, one should allow the markings of a diagram to be located at ‘infinity’, i.e. the end of the unbounded elevators. We then have to distinguish between fixed elevators, which are elevators with a marking at their infinite extremity (corresponding to the $\mu _0$ and $\mu _\infty$ constraints), and marked elevators, which are just elevators containing a marked point but not at their extremity.

In order to keep things simple, we keep the main framework of diagrams avoiding constraints at infinity, and present a remark to explain what changes in their presence.

Example 5.4 In Figure 8 we can see two examples of marked floor diagrams. As in [Reference Brugallé and MikhalkinBM07], we only mark the image of the markings, main difference being that it is no longer unique since not all edges bear a marked point. The number of markings is then equal to the number of increasing maps to the diagram.

Figure 8. Four floor diagrams with markings.

The first two marked diagrams are for $\delta =0$. They have the same underlying diagram but different markings. They are both of genus $2$ since there are two floors and no apparent cycle. The bidegree is $(5,3)$ as the sum of floors weights is $5$ while the sum of weights at top infinity is $3$.

The last two diagrams are for $\delta =1$. We can check that the balancing condition is satisfied at each floor, and that the complement of marked elevators contains a unique unbounded elevator in each of the marking. The genus is still $2$ while the bidegree is $(3,1)$.

We refer to § 6.1 for more examples of floor diagrams and markings on it.

5.2 Floor diagrams from a tropical curve

We now explain how to get a marked floor diagram $(\mathfrak {D},\mathfrak {m})$ from a parametrized tropical curve $h:\Gamma \to \mathbb {T} X$ passing through a vertically stretched configuration of points. In all what follows, we consider a parametrized tropical curve $h:\Gamma \to \mathbb {T} X$ of bidegree $(d_1,d_2)$ and fixed tangency profile $(\mu _0,\mu _\infty )$.

Remark 5.5 We only consider tropical curves only passing through point constraints, but everything also works when we add constraints on the position of some unbounded ends of the curves. The difference is that we get marked floor diagrams with fixed elevators instead of only marked elevators.

Definition 5.6 A generic point configuration $\mathcal {P}$ on $\mathbb {T} X$ is said to be stretched if the difference between the $y$-coordinate of the points taken in the standard chart of $\mathbb {T} X$ is very large when compared to the length $l$ of the elliptic curve $\mathbb {T} E$.

Before getting to the process, we give a few lemmas about the edges of parametrized tropical curves inside $\mathbb {T} X$.

Lemma 5.7 Let $h:\Gamma \to \mathbb {T} X$ be a parametrized tropical curve of bidegree $(d_1,d_2)$. The slope of an edge can only take a finite number of values.

Proof. Let $e$ be a bounded edge of $\Gamma$ with slope $(u,v)$. Assume $u\neq 0$. The intersection index with a fiber $F$ gives intersection number $|u|$, and it cannot be more than the intersection number between $\Gamma$ and $F$. Thus, one has $|u|\leqslant \Gamma \cdot F=d_1$. Assuming $v\neq 0$, we can similarly intersect with a section and get this time $|v|\leqslant \Gamma \cdot E_0=\delta d_1+d_2$.

Lemma 5.8 Let $h:\Gamma \to \mathbb {T} X$ be a parametrized tropical curve of bidegree $(d_1,d_2)$ and let $e$ be a non-vertical edge of $\Gamma$ with slope $(u,v)$. Then there exists $M$ only depending on the bidegree $(d_1,d_2)$ and the length $l$ of $\mathbb {T} E$ such that one has

\[ l(e)\leqslant M. \]

In other words, Lemma 5.8 asserts that there is a uniform bound on the length of non-vertical edges for curves of a fixed bidegree in $\mathbb {T} X$.

Proof. Let $e$ be a bounded edge of $\Gamma$. If the length of $e$ is too big, it rolls several times around the cylinder and provides too many intersection points with a fiber $F$. In fact, it provides at least $\lfloor {l(e)}/{l} \rfloor$ intersection points, which each contribute $|u|$ to the intersection index. Then, one gets that $\lfloor {l(e)}/{l} \rfloor |u|\leqslant d_1$. Hence, as $|u|\geqslant 1$, it suffices to take $M=l(d_1+1)$.

Definition 5.9 A vertical edge of $\Gamma$ is called an elevator. A connected component of the complement of vertical edges is called a floor.

We now assume that our configuration of points $\mathcal {P}$ is stretched in the vertical direction, meaning the difference between the heights of two points in the configuration are very large when compared with $l$, $d_1$, $d_2$ and $\delta$. We also assume that $\Gamma$ passes through $\mathcal {P}$. We define a diagram $\mathfrak {D}(\Gamma )$ from $\Gamma$ as follows, and then show that it is actually a floor diagram.

  • The vertices of $\mathfrak {D}$ are the floors of $\Gamma$. The weight of a floor $\mathcal {F}$ is its intersection number with a fiber $F$.

  • The edges of $\mathfrak {D}$ are the elevators of $\Gamma$, oriented with an increasing $y$-coordinate. The weight of an elevator is its weight as an edge of $\Gamma$, i.e. the integral length of the slope of $h$ on it.

  • The floor diagram $\mathfrak {D}$ is marked by the marked points of $\mathcal {P}$.

If $\Gamma$ has tangency profile $(\mu _0,\mu _\infty )$, so has $\mathfrak {D}$. We now have to check the various requirements to ensure that with the marking $\mathfrak {m}$ provided by the marked points $\mathcal {P}$, $(\mathfrak {D},\mathfrak {m})$ is indeed a floor diagram of bidegree $(d_1,d_2)$, tangency profile $(\mu _0,\mu _\infty )$, and of genus $g(\mathfrak {D})=g(\Gamma )$. This is the content of the following proposition.

Proposition 5.10 Let $h:\Gamma \rightarrow \mathbb {T} X$ be a tropical curve of bidegree $(d_1,d_2)$ passing by the stretched configuration $\mathcal {P}$, and let $\mathfrak {D}$ be the graph constructed by the preceding construction. Then, one has:

  1. (i) the floors weights satisfy $\sum _\mathcal {F} w_\mathcal {F}=d_1$;

  2. (ii) for each floor $\mathcal {F}$ of $\Gamma$ one has $\mathrm {div} \mathcal {F}=\sum _{e\ni \mathcal {F}}\pm w_e$;

  3. (iii) each floor contains exactly one marked point;

  4. (iv) each elevator contains at most one marked point;

  5. (v) the floors have genus $1$, and in particular $g(\mathfrak {D})=g(\Gamma )$;

  6. (vi) each floor is adjacent to at least one unmarked elevator, and components of the complement of the marked elevators contain a unique unbounded elevator.

In particular, $\mathfrak {D}$ is a floor diagram, and $\mathfrak {m}$ is a marking on $\mathfrak {D}$.

Proof. (i) The total intersection number between $\Gamma$ and a generic fiber $F$ is $d_1$, and only the floors contribute to the intersection, since the elevators have also a vertical slope. The result follows.

(ii) We cut the curve along the strip to get an honest tropical curve inside $\mathbb {R}^2$. The sum of all the slopes of the outgoing edges is $0$ by the balancing condition. By definition, the elevators adjacent to the floor contribute exactly to $(\mathrm {div} \mathcal {F})\times (0,-1)$. Meanwhile, let $P$ be one of intersection points with right side of the strip. Let $(u_P,v_P)$ be its slope. The slope of the edge coming on the other side of the strip is $(u_P,v_P-\delta u_P)$ with ingoing orientation. Thus, taking the outgoing orientation, the two slopes add up to $(0,\delta u_P)$. Adding all the contribution, we get $(0,\delta \sum _P u_P)$. Moreover, the intersection index $w_\mathcal {F}$ between $\mathcal {F}$ and a fiber is precisely $\sum _P u_P$. Hence, by the balancing condition, one gets

\[ \mathrm{div} \mathcal{F}=\delta w_\mathcal{F}. \]

(iii) By Lemma 5.7, the slope of a curve of bidegree $(d_1,d_2)$ can only take a finite set of values. By Lemma 5.8, the length of non-vertical edges is bounded by the degree. As there are a finite number of edges, it is not possible to find a path from two points in the stretched configuration without having to pass through an elevator. Thus, a floor contains at most one marked point. It contains at least one otherwise it is possible to translate vertically the floor and get a $1$-parameter family of curves passing through $\mathcal {P}$, contradicting the genericity of $\mathcal {P}$.

(iv) As the configuration $\mathcal {P}$ is generic, no two marked points have the same projection to $\mathbb {T} E$, and thus an elevator cannot contain more than one marked point.

(v) As in the planar case and proved in [Reference MikhalkinMik05], the complement of the marked points $\Gamma \backslash h^{-1}(\mathcal {P})$ is without cycle, and each component contains a unique unbounded end.

  • As solutions are trivalent, it is possible to deform cycles and paths between two unbounded ends, thus, there are no cycles, and at most one unbounded end per component.

  • An Euler characteristic computation ensures that there is at least one end per component. Alternatively, a bounded component would give a relation between the marked points at its boundary, resulting in a non-generic choice of constraints. Thus, there are at least one end per component.

Thus, a floor cannot be of genus greater than $2$, otherwise, as it contains a unique marked point, the complement of the marked points would still contain some cycle.

(vi) Following the preceding point, not all the elevators adjacent to a floor can be marked, since it would lead to a bounded component in $\Gamma -h^{-1}(\mathcal {P})$. The rest follows from the same observation.

Remark 5.11 The difference between the markings for diagrams on a cylinder and the planar case from [Reference Brugallé and MikhalkinBM07, Reference Brugallé and MikhalkinBM08] is that the floors from a diagram in a cylinder do not contain any unbounded end from the tropical curve $\Gamma$. Thus, the unbounded end (which is vertical) is reached by a path of elevators.

In particular, the point $(v)$ can be refined in the following proposition: each floor is a graph whose total space is homeomorphic to a circle. Then, the projection $\pi :\mathbb {T} X\to \mathbb {T} E$ restricts on the floor to a cover of $\mathbb {T} E$.

Proposition 5.12 Let $h:\Gamma \to \mathbb {T} X$ be a genus $g$ parametrized tropical curve of bidegree $(d_1,d_2)$ passing through a stretched configuration of points $\mathcal {P}$. Each floor of $\Gamma$ is homeomorphic to a circle. The degree $w_\mathcal {F}$ of the floor splits as

\[ w_\mathcal{F}=d_\mathcal{F} k_\mathcal{F}, \]

where $d_\mathcal {F}$ is the degree of the cover $\pi _\mathcal {F}:\mathcal {F}\to \mathbb {T} E$, and $k_\mathcal {F}$ is the common horizontal coordinate of slope of $h$ on the edges of $\mathcal {F}$.

Proof. As the curve is trivalent, and the floor $\mathcal {F}$ contains a unique cycle, if an edge of $\mathcal {F}$ was not contained in the cycle, it would be separating. In particular, on one side would be a graph without cycle whose vertices are at some point adjacent to elevators. Thus, their slopes would be vertical by the balancing condition. Hence, $\mathcal {F}$ is homeomorphic to a circle and every vertex of $\mathcal {F}$ must be adjacent to some elevator. In particular, the horizontal slope of the edges on $\mathcal {F}$ is constant using to the balancing condition. Let us denote this number by $k_\mathcal {F} >0$. Furthermore, there are $d_\mathcal {F}$ points in $\mathcal {F}$ resulting from the intersection of $\mathcal {F}$ with a fiber $F$. Each of them contributes $k_\mathcal {F}$ to the intersection between $\mathcal {F}$ and $F$. Hence,

\[ w_\mathcal{F}=d_\mathcal{F} k_\mathcal{F}. \]

Remark 5.13 The possible splittings of $w_\mathcal {F}$ as a product $dk$ are partially depicted in Figure 6(b) and (c). The integer $d$ is the number of turns that the floor makes, and $k$ the ‘speed’ at which it makes them.

5.3 Multiplicities of floor diagrams

5.3.1 Classical multiplicity

We now define the multiplicity of a marked floor diagram $(\mathfrak {D},\mathfrak {m})$ so that it matches the sum of the multiplicities of the tropical curves $h:\Gamma \to \mathbb {T} X$ it encodes. The fact that the multiplicity is the right one is proven in Theorem 5.19.

Definition 5.14 Let $(\mathfrak {D},\mathfrak {m})$ be a marked floor diagram. The multiplicity $m(\mathcal {F})$ of a floor $\mathcal {F}$ is

\[ m(\mathcal{F})=w_\mathcal{F}^{\mathrm{val}(\mathcal{F})-1}\sigma_1(w_\mathcal{F}), \]

where $\sigma _1(n)=\sum _{d|n}d$ is the sum of divisors. Let $\mathfrak {D}^\infty _{m}$ (respectively, $\mathfrak {D}^\infty _{um}$, $\mathfrak {D}^b_{m}$, $\mathfrak {D}^b_{um}$) be the set of unbounded elevators which are marked (respectively, unbounded unmarked, bounded marked, bounded unmarked). The multiplicity of $(\mathfrak {D},\mathfrak {m})$ is defined as follows:

\[ m(\mathfrak{D},\mathfrak{m})=\prod_\mathcal{F} m(\mathcal{F}) \prod_{e\in\mathfrak{D}^\infty_{m}}w_e \prod_{e\in\mathfrak{D}^b_{m}}w_e^2\prod_{e\in\mathfrak{D}^\infty_{um}}w_e^2 \prod_{e\in\mathfrak{D}^b_{um}}w_e^3, \]

where the first product is over the floors of $\mathfrak {D}$.

Remark 5.15 In the presence of constraints on the unbounded ends, i.e. when considering the relative invariants $N^\delta _{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$, we get fixed elevators, corresponding to elements in the partition $\mu _0$ or $\mu _\infty$. We deal with the diagram multiplicities as in [Reference Gathmann and MarkwigGM07a]. We take as diagram multiplicity $({1}/{I^{\mu _0+\mu _\infty }})m(\tilde {\mathfrak {D}},\tilde {\mathfrak {m}})$, where $(\tilde {\mathfrak {D}},\tilde {\mathfrak {m}})$ is the marked diagram where the infinite markings have been replaced by finite markings on their respective elevators. The multiplicity of $(\tilde{\mathfrak{D}},\tilde{\mathfrak{m}})$ has indeed been defined above.

We refer to the proof of Theorem 5.19 for details but briefly explain the meaning of the different terms in the multiplicity. The floor multiplicity corresponds to the various possible shapes of the floor and the product of the vertices on it, as partially depicted in Figure 6(b) and (c). In a sense, it corresponds to the computation of some $N^\delta _{1,(w_\mathcal {F},-)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$, where $|\nu _0|+|\nu _\infty |=1$. Choosing a shape of floor amounts to choose a splitting $w_\mathcal {F}=d_\mathcal {F} k_\mathcal {F}$, and the sum over these possibilities makes appear the $\sigma _1(w_\mathcal {F})$. Concerning elevators, as each elevator is adjacent to two vertices, it contributes to a factor $w_e^2$ to the multiplicity. The contribution $w_e^3$ of the unmarked elevators comes from the fact that in contrast to the planar case, fixing the elevators adjacent to a vertex and the position of a point is not enough to ensure a unique solution. In fact, there are precisely $w_e$ possible positions, where $w_e$ is the weight of the unmarked elevator in the direction of the unique unmarked unbounded elevator.

Example 5.16 The multiplicities of the marked diagrams in Figure 8 are respectively:

  • $m(\mathfrak {D}_1,\mathfrak {m}_1)=2^3\sigma _1(2)\cdot 3^1\sigma _1(3)\cdot 2\cdot 2^3\cdot 2,$

  • $m(\mathfrak {D}_2,\mathfrak {m}_2)=2^3\sigma _1(2)\cdot 3^1\sigma _1(3)\cdot 2\cdot 2^2\cdot 2^2,$

  • $m(\mathfrak {D}_3,\mathfrak {m}_3)=2^2\sigma _1(2)\cdot 1^2\sigma _1(1)\cdot 2^2,$

  • $m(\mathfrak {D}_4,\mathfrak {m}_4)=2^2\sigma _1(2)\cdot 1^2\sigma _1(1)\cdot 2^2.$

The first and second diagram have each two possible markings since we need to choose which of the marking is on the bottom end of weight $2$. The third diagram has only one marking but the last one has three since we need to choose which of the three markings lies on the right unbounded elevator.

5.3.2 Refined multiplicity

The multiplicity giving the refined invariants is more complicated to handle, since its value does not only depend on the valency and weight of a floor, but also on the weights of the adjacent elevators. With the same notation as in Definition 5.14, we set the following.

Definition 5.17 Let $(\mathfrak {D},\mathfrak {m})$ be a marked floor diagram. Let $\mathcal {F}$ be a floor, and let $(u_i)_{1\leqslant i\leqslant N}$ be the weights of the adjacent elevators. The refined multiplicity $m^q(\mathcal {F})$ of a floor $\mathcal {F}$ is

\[ m^q(\mathcal{F})=\sum_{kd=w_\mathcal{F}} d^{N-1}\prod_{i=1}^N \frac{[ku_i]_q}{[u_i]_q}= \sum_{kd=w_\mathcal{F}} d^{N-1}\prod_{i=1}^N \frac{q^{ku_i/2}-q^{-ku_i/2}}{q^{u_i/2}-q^{-u_i/2}}. \]

The refined multiplicity of $(\mathfrak {D},\mathfrak {m})$ is defined as follows:

\[ m^q(\mathfrak{D},\mathfrak{m})=\prod_\mathcal{F} m^q(\mathcal{F}) \prod_{e\in\mathfrak{D}^\infty_{m}}[w_e]_q \prod_{e\in\mathfrak{D}^b_{m}}[w_e]_q^2\prod_{e\in\mathfrak{D}^\infty_{um}}w_e[w_e]_q \prod_{e\in\mathfrak{D}^b_{um}}w_e[w_e]_q^2, \]

where the first product is over the floors of $\mathfrak {D}$.

Remark 5.18 The definition is adapted to the setting of fixed elevators by dividing by $I_q^{\mu _0+\mu _\infty }$.

5.4 Statement

We now have the main result of the section, asserting that the count of marked floor diagrams coincides with the number of tropical curves.

Theorem 5.19 One has

\begin{gather*} \sum_{(\mathfrak{D},\mathfrak{m})}m(\mathfrak{D},\mathfrak{m})=N^{\delta}_{g,(d_1,d_2)} \quad \text{and} \quad \sum_{(\mathfrak{D},\mathfrak{m})}m(\mathfrak{D},\mathfrak{m})= N^\delta_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty),\\ \sum_{(\mathfrak{D},\mathfrak{m})}m^q(\mathfrak{D},\mathfrak{m})= BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)} \quad \text{and} \quad \sum_{(\mathfrak{D},\mathfrak{m})}m^q(\mathfrak{D},\mathfrak{m})= BG^{\delta,\mathrm{trop}}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty), \end{gather*}

where the first sum is over the marked floor diagrams of genus $g$ and bidegree $(d_1,d_2)$, and the second sum over the marked floor diagrams of genus $g$, bidegree $(d_1,d_2)$ and ramification profile $(\mu _0+\nu _0,\mu _\infty +\nu _\infty )$, with elevators corresponding to $\mu _0$ and $\mu _\infty$ fixed.

Proof. We have already proved the following: if the point configuration $\mathcal {P}$ is stretched, all the sought parametrized tropical curves passing through $\mathcal {P}$ admit a floor decomposition. Thus, we need to prove that the multiplicity of a marked floor diagram $(\mathfrak {D},\mathfrak {m})$ matches the sum of the multiplicities of the tropical curves it encodes.

To recover a tropical curve from a floor diagram, one just needs to recover the floors and the position of the unmarked elevators. This is done as follows. By assumption, the complement of marked elevators is a forest of trees that each contain a unique unbounded elevator. For a floor $\mathcal {F}$, assuming all the adjacent elevators are marked, we show in the following that this is indeed sufficient to impose a finite number of shape of the floor $\mathcal {F}$, and fix the position of the remaining elevator $e$ up to $w_e$-torsion. We then proceed by induction, pruning the trees of the forest.

Let $\mathcal {F}$ be a floor all of whose adjacent elevators but one bear a marking. Let $(u_i)$ be the collection of weights of the adjacent elevators (with a sign according to whether the elevator goes up or down), $x_i$ their position in $\mathbb {T} E$, with the first elevator being the unmarked one. The floor $\mathcal {F}$ is a circle with some adjacent elevators, and it might go around the cylinder several times. Thus, one has to consider all the possible splittings of $w_\mathcal {F}$ as a product $w_\mathcal {F}=d\cdot k$, where $d$ is the degree of the topological cover $\pi |_\mathcal {F}:\mathcal {F}\to \mathbb {T} E$, and $k$ the common horizontal coordinate of the slopes of the edges on $\mathcal {F}$.

  • First, assume that $d=1$. We consider the chart given by the strip $[0;l]\times \mathbb {R}$. Then the floor that we are looking for is the tropical graph (i.e. the usual graph inside $\mathbb {T} X$ plus vertical ends to make it balanced at corners of the graph) of some piecewise affine function on $[0;l]$ satisfying the gluing condition on the boundary of the strip leading to $\mathbb {T} X$.

Remark 5.20 The problem amounts to find a meromorphic sections of a line bundle that have prescribed poles and zeros, and one non-fixed pole/zero $x_0$ which should have multiplicity $u_1$.

The condition for the existence of such a piecewise affine function is that the divisor $\sum _1^N u_ix_i$ is equivalent to the divisor of the line bundle defining $\mathbb {T} X$ inside $\mathrm {Pic}^0(\mathbb {T} E)\simeq \mathbb {Z}\times \mathbb {T} E$: the degree ensures that the change of slope between $0$ and $l$ is the right one, and the component in $\mathbb {T} E$ ensures that points on both sides of the strip are glued together. The degree condition is already ensured by the divergence condition in the diagram. The remaining constraint determines uniquely $u_1x_1$:

\[ u_1x_1+\sum_2^N u_k x_k=\left\{ \begin{array}{@{}ll} w_\mathcal{F}\alpha & \text{if }\delta=0 \\ 0 & \text{if }\delta\neq 0 \\ \end{array}\right. \in \mathbb{T} E\simeq\mathbb{R}/l\mathbb{Z}. \]

Thus, it gives $u_1$ possibilities for the position $x_1$ of the unmarked elevator, translating by the $u_1$-torsion elements. This accounts for one of the $u_1$ factor in the formula. (The others come from the vertex multiplicity.) For each possible choice of $x_1$, the choice of piecewise affine function is unique up to a constant shift because the difference of two such functions gives an affine function on $\mathbb {T} E$, which is necessarily constant. The point condition on the floor fixes the constant.

  • If $d\neq 1$, we unfold the floor to the $d$-fold cover of $\mathbb {T} E$. We thus take a chart given by the strip $[0;dl]\times \mathbb {R}$. For each elevator, one has to choose a lift (no pun intended), there are $d^{\mathrm {val}(\mathcal {F})-1}$ possibilities for the lifts of the marked elevators. We now look for a piecewise affine function on $[0;dl]$. The same reasoning gives $u_1$ solutions for the position of $x_1$ inside $[0;dl]$. We then project the solutions back to $\mathbb {T} E$ and get floors that make $d$ rounds around the cylinder. However, one has to divide by the $d$ deck transformations of the cover. However, as there are now $d$ possible shifts to make the floor pass through the fixed point, we have to multiply again by $d$, cancelling the previous division. Note that the position of the unmarked elevator is fixed in the cover, we do not and cannot choose its lift under the covering map since the relation $\sum u_i x_i\equiv \ast$ has to be satisfied in the $d$-fold cover of $\mathbb {T} E$.

The vertex multiplicity of every vertex on $\mathcal {F}$ is equal to $u_i k$, where $u_i$ is the weight of the adjacent elevator. Thus, we get the following contribution:

(5.1)\begin{equation} u_1\sum_{dk=w_\mathcal{F}} d^{\mathrm{val}(\mathcal{F})-1}\bigg(\prod_1^N ku_i\bigg)=u_1\bigg(\prod_1^N u_i\bigg)w_\mathcal{F}^{\mathrm{val}(\mathcal{F})-1}\sigma_1(w_\mathcal{F}), \end{equation}

where $\sigma _1(n)=\sum _{d|n}d$. We then make the product over all the floors to reconstruct all the tropical curves. Finally, we get:

  • the product of all the $m(\mathcal {F})$;

  • a marked bounded edge $e$ is adjacent to two floors, thus we multiply by $w_e^2$;

  • an unmarked bounded edge is adjacent to two floors, hence a factor $w_e^2$ coming from the multiplicities of the adjacent vertices, and as its position is only determined up to $w_e$-torsion, an additional factor $w_e$, as present in (1);

  • a marked unbounded end is adjacent to only one floor, hence a contribution $w_e$;

  • an unmarked unbounded end is adjacent to only one floor, and its position is fixed up to $w_e$-torsion, hence a contribution of $w_e^2$.

We thus get the announced multiplicity. In the refined case, (1) is replaced by

\[ u_1\sum_{kd=w_\mathcal{F}} d^{\mathrm{val}(\mathcal{F})-1}\prod_i[ku_i]_q= u_1\prod_i [u_i]_q\sum_{dk=w_\mathcal{F}} d^{\mathrm{val}(\mathcal{F})-1}\prod_i \frac{[ku_i]_q}{[u_i]_q}=u_1m^q(\mathcal{F})\prod_i [u_i]_q . \]

Making the product of all contribution, we get the multiplicity from Definition 5.17.

Remark 5.21 The multiplicity of a floor $\mathcal {F}$ is derived from the solution to the following special instance of our enumerative problem: the genus is $1$, all but one ends are fixed and we have a unique additional point condition.

As in [Reference Arroyo, Brugallé and Lopez De MedranoABL11], the floor diagram decomposition can be seen as the iterated application of some Caporaso–Harris-type formula for the relative invariants $N^\bullet _{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$. In our case, the formulas for classical and refined invariants are as follows. Despite their massive expression, their proof is not that difficult and relies on the existence of floor diagrams. Their shape becomes clearer with the Fock space approach which is the content of § 7. If $\mu \geqslant \nu$ are two partitions, then $\binom {\mu }{\nu }$ is by definition $\prod _i \binom {\mu _i}{\nu _i}$. Recall that $I^\mu =\prod _i i^{\mu _i}$, and $I_q^\mu =\prod _i [i]_q^{\mu _i}$.

Theorem 5.22 We have the following recursive formulas:

\begin{align*} & N^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty) \\ & \quad = \sum_{k:\nu_{0k}>0} k N^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0+e_k,\mu_\infty,\nu_0-e_k,\nu_\infty)\\ & \qquad + \sum \begin{pmatrix}\mu_0 \\\mu'_0 \\\end{pmatrix} \begin{pmatrix}\nu'_0 \\\nu_0-e_k \\\end{pmatrix} I^{\nu'_0-\nu_0}s^{|\mu'_0-\mu_0|+|\nu'_0-\nu_0|}\sigma_1(s)k^2 N^{\delta,\bullet}_{g',(d_1-s,d_2)}(\mu'_0,\mu_\infty,\nu'_0,\nu_\infty)\\ & \qquad + \sum \begin{pmatrix}\mu_0 \\\mu'_0 \\\end{pmatrix}\begin{pmatrix}\nu'_0 \\\nu_0 \\\end{pmatrix} I^{\nu'_0-\nu_0} s^{|\mu_0-\mu'_0|+|\nu'_0-\nu_0|}\sigma_1(s) k^2 N^{\delta,\bullet}_{g',(d_1-s,d_2)}(\mu'_0+e_k, \mu_\infty,\nu'_0,\nu_\infty), \end{align*}

and

\begin{align*} & BG^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty) \\ &\quad = \sum_{k:\nu_{0k}>0} [k]_q BG^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0+e_k,\mu_\infty,\nu_0-e_k,\nu_\infty)\\ &\qquad + \sum \begin{pmatrix}\mu_0 \\\mu'_0 \\\end{pmatrix}\begin{pmatrix}\nu'_0 \\\nu_0-e_k \\\end{pmatrix} I_q^{\nu'_0-\nu_0}\bigg(\sum_{dl=s}d^{|\mu'_0-\mu_0|+|\nu'_0-\nu_0|} \frac{[lk]_q}{[k]_q}\\ & \qquad \times \prod_i \bigg(\frac{[il]_q}{[i]_q}\bigg)^{\mu_{0i} -\mu'_{0i}+\nu'_{0i}-\nu_{0i}}\bigg)k[k]_q BG^{\delta, \bullet}_{g',(d_1-s,d_2)}(\mu'_0,\mu_\infty,\nu'_0,\nu_\infty) \\ &\qquad + \sum \begin{pmatrix}\mu_0 \\\mu'_0 \\\end{pmatrix}\begin{pmatrix}\nu'_0 \\\nu_0 \\\end{pmatrix} I_q^{\nu'_0-\nu_0}\bigg(\sum_{dl=s}d^{|\mu'_0-\mu_0| +|\nu'_0-\nu_0|}\frac{[lk]_q}{[k]_q}\\ & \qquad \times \prod_i \bigg(\frac{[il]_q}{[i]_q}\bigg)^{\mu_{0i} -\mu'_{0i}+\nu'_{0i}-\nu_{0i}}\bigg)k[k]_q BG^{\delta,\bullet}_{g',(d_1-s,d_2)}(\mu'_0+e_k, \mu_\infty,\nu'_0,\nu_\infty), \end{align*}

where the second and third sums are over $g',s,k,\mu '_0,\nu '_0$ such that, respectively,

\[ \begin{array}{l@{\qquad}l} \hline \text{Second sum} & \text{Third sum} \\ \hline \mu'_0\leqslant \mu_0 & \mu'_0\leqslant \mu_0 \\ \nu'_0\geqslant \nu_0-e_k & \nu'_0\geqslant \nu_0 \\ \|\nu'_0\|+\|\mu'_0\|=\delta(d_1-s)+d_2 & \|\nu'_0\|+\|\mu'_0\|+k=\delta(d_1-s)+d_2 \\ g-g'=|\nu'_0-\nu_0| & g-g'=|\nu'_0-\nu_0|+1.\\ \hline\end{array} \]

Proof. The proof is similar to the tropical proof of the Caporaso–Harris formula in [Reference Gathmann and MarkwigGM07a]. The three sums emphasize the three possible events when taking one of the $|\nu _0|+|\nu _\infty |+g-1$ marked points and moving it far down.

  • The marked point goes on an elevator, and we then count the same curves but with a bottom elevator that is now fixed. The factor $k$ is present due to the fact that for relative invariant, tropical curves are counted with a multiplicity $({1}/({I^{\mu _0+\mu _\infty }}))m_\Gamma$.

  • The marked points goes on a floor, of degree denoted by $s$, and exactly one unfixed bottom elevator arrives on the floor. We get terms in the second sum.

    • The $\mu _0$ fixed ends are split between those that do not arrive on the floor and those who do, respectively $\mu '_0$ and $\mu _0-\mu '_0$.

    • One unfixed elevator of weight $k$ arrives on the floor.

    • Including the unfixed ends leaving the floor, there are $\nu '_0\geqslant \nu _0-e_k$ unfixed ends.

    The other terms are here to account for the different shapes of the floors, and the multiplicities of the vertices on it. The binomial coefficients are here to account for the symmetries between the different unbounded ends.

  • Finally, the marked point still goes on a floor, but only fixed bottom elevators arrive on it. Then, one unmarked elevator needs to leave the floor, and the other are free. The position of the free elevators is determined by the other. We get the last sum with similar bookkeeping.

Remark 5.23 The recursive formula from Theorem 5.22 along with some initialization for $d_1=1$ and $g=1$, or $g=0$ and $d_1=0$ allows one to compute all relative invariants.

Remark 5.24 It is also possible to get a Caporaso–Harris-like formula by taking a point far up. Concretely, it means starting the floor diagram by the top floor rather than by the first floor.

6. Examples and applications

We now give several examples of computation of invariants $N^\delta _{g,(d_1,d_2)}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )$. We also give a polynomiality result about some of their generating functions, and quasi-modularity for another.

6.1 Concrete computations

Example 6.1 We compute $N^\delta _{1,(d_1,d_2)}$ for any bidegree. As the genus is $1$, there is only one floor diagram that contributes: a floor diagram with more floors would be of genus at least $2$. However, if $d_2\geqslant 1$, there are two possible markings, since the non-marked end can be above or under the floor. Their multiplicities are both $d_1^{\delta d_1+2d_2-1}\sigma _1(d_1)$, giving

\[ N^\delta_{1,(d_1,d_2)}=2d_1^{\delta d_1+2d_2-1}\sigma_1(d_1). \]

If $d_2=0$, there is no elevators above the floor, and one thus has

\[ N^\delta_{1,(d_1,d_2)}=d_1^{\delta d_1-1}\sigma_1(d_1). \]

Example 6.2 We take $\delta =0$, $g=2$ and compute $N^0_{2,(d,2)}$ for any $d$. The floor diagrams $\mathfrak {D}$ we are looking for are depicted on Figure 9. There are three possible shapes. For each shape, one has to look for all the possible splittings of the degree $d$ among the two floors of the curve: $w$ and $d-w$. Finally, one has to account for the different labellings $\mathfrak {m}$ of the floor diagrams. There are $n=5$ points for marking $\mathfrak {D}$. As both floors are marked, exactly two elevators have no marked point. Taking into account the fact that each component of the complement of the marked elevators possesses a unique unbounded end, this allows one to make the list of all possibilities depicted in Figure 9.

  • The first diagram possesses three possible markings. In exactly two of them, the unique bounded elevator of weight $2$ is unmarked. They give the following contribution:

    \[ w^2\sigma_1(w)(d-w)^2\sigma_1(d-w)(2^2+2^3+2^3). \]
  • For the second diagram in Figure 9, the possible images of the markings are drawn under it. There are five possibilities. Then, one has to count the increasing functions to the each of the image, as for usual floor diagrams in [Reference Brugallé and MikhalkinBM07]. This yields the following contribution:

    \[ w\sigma_1(w)(d-w)^3\sigma_1(w)( 1+1+3+3+2 ). \]
  • The last floor diagram is the symmetric version of the second one and yields the same contribution.

Finally, we get that

\begin{align*} N^0_{2,(d,2)}=\sum_{w=1}^{d-1} 20 w^2\sigma_1(w)(d-w)^2\sigma_1(d-w) + 20w\sigma_1(w)(d-w)^3\sigma_1(w). \end{align*}

Figure 9. Floor diagrams of genus $2$ and bidegree $(d,2)$ in $\mathbb {T} X_0$ with their markings.

Example 6.3 We now assume $\delta =1$, $g=2$ and compute $N^1_{2,(2,0)}$ and $N^1_{2,(2,1)}$. For $N^1_{2,(2,0)}$, there is just one floor diagram of genus $2$, on the left of Figure 10, and it possesses exactly one marking, depicted under it. It yields

\begin{align*} N^1_{2,(2,0)}=1. \end{align*}

For $N^1_{2,(2,1)}$, there are two floor diagrams of genus $2$ and bidegree $(2,1)$. They are drawn on the right of Figure 10. There are $n=5$ points to mark the diagram. Thus, exactly two elevators are unmarked.

  • The first diagram (middle of Figure 10) has three possible markings. The edge of weight $2$ is unmarked for the first two, and marked for the last. They give the following contribution:

    \[ 2^3+2^3+2^2. \]
  • Similarly to the previous example, we depict the possible markings of the second floor diagram (right of Figure 10) according to their image. When counting them with the number of increasing functions to the fixed image, they yield the following contribution:

    \[ 1+3+1+4+4. \]

We thus get

\[ N^1_{2,(2,1)}=33. \]

Figure 10. Floor diagrams of genus $2$ and bidegree $(2,0)$ and $(2,1)$ in $\mathbb {T} X_1$ with their markings.

Example 6.4 Back with $\delta =0$, we now take $g=3$ and compute the relative invariant

\[ N_{3,(3,w)}(0,0,w^1,w^1). \]

There are now two floor diagrams of genus $3$. One has three floors, and one has two, and they are depicted on Figure 11.

  • The first one possesses four different markings, which are each of multiplicity $w^{9}$. In this case, we have on Figure 11, $a=b=c=1$. If the bidegree was $(d,w)$ rather than $(3,w)$, one would have to multiply by the floors multiplicities $abc\sigma _1(a)\sigma _1(b)\sigma _1(c)$ for all the splittings $a+b+c=d$.

  • The second floor diagram possesses two possible markings, and additionally to the splitting of $3=a+b$ among the two floors, one has to account for the splitting of $w$ among the two bounded edges between the two floors. They yield the following contribution:

    \[ 12w^3\sum_{i=1}^{w-1} i^2(w-i)^3 , \]
    as the floors contribute $2^2 1^2\sigma _1(2)\sigma _1(1)+2^2 1^2\sigma _1(2)\sigma _1(1)=12$. If the bidegree was rather $(d,w)$, one would make the sum over the splittings $d=a+b$, with floors multiplicities $a^2b^2\sigma _1(a)\sigma _1(b)$.

In total, we get

\[ N^0_{3,(3,w)}(0,0,w^1,w^1)=4w^9+12w^3\sum_{i=1}^{w-1} i^2(w-i)^3. \]

Note that as for any polynomial $P$, $\sum _{k=1}^nP(k)$ is still a polynomial in $n$, the result is, in fact, a polynomial in $w$. This fact is generalized in the next subsection.

Figure 11. Floor diagrams used for the computation of $N^0_{3,(d,w)}(0,0,w^1,w^1)$.

Remark 6.5 Note that in each case, the number of floors is bounded by the genus, since each floor contributes $1$ to the genus, and by the first coordinate of the bidegree, since each floor is of degree at least $1$.

6.2 Polynomiality of relative invariants

We now consider partitions $\nu _0$ and $\nu _\infty$ of fixed length $l_0$ and $l_\infty$, but of arbitrary size, provided that $\|\nu _0\|-\|\nu _\infty \|=\delta d_1$ for some fixed $d_1$. Let $d_2=\|\nu _\infty \|$. We look for curves of genus $g$ of bidegree $(d_1,d_2)$ and tangency profile $(\nu _0,\nu _\infty )$ passing through $l_0+l_\infty +g-1$ points. For the following theorem, we consider a partition $\nu$ of fixed length $l$ as a tuple $(\nu _1,\ldots,\nu _l)$.

Theorem 6.6 For any fixed genus $g$, degree $d_1$, partition lengths $l_0$ and $l_\infty$, the function $(\nu _0,\nu _\infty )\mapsto N^\delta _{g,(d_1,d_2)}(0,0,\nu _0,\nu _\infty )$ is a piecewise polynomial function in the variables $\nu _{0,1},\ldots,\nu _{0,l_0}$, $\nu _{\infty, 1},\ldots,\nu _{\infty, l_\infty -1}$.

Remark 6.7 The last variable $\nu _{\infty, l_\infty }$ does not appear since the variables are constrained by the relation $\|\nu _0\|-\|\nu _\infty \|=\delta d_1$.

Proof. As the genus $g$, number of marked points $l_0+l_\infty +g-1$ and total weight of the floors $d_1$ are fixed, up to the choice of the weight of the edges, there are a finite number of floor diagrams. Thus, we only need to show that spreading the weight among the edges leads to a polynomial for each marked floor diagram $(\mathfrak {D},\mathfrak {m})$.

Let $\mathfrak {D}_1$ be a minimal subset of the set of bounded edges of a marked floor diagram $(\mathfrak {D},\mathfrak {m})$ such that the complement is simply connected. Thus, if one fixes the weight $w_e$ of an edge $e\in \mathfrak {D}_1$, as the weights of the unbounded ends are prescribed by $\nu _0$ and $\nu _\infty$, there is a unique way to complete the weights of the other edges with numbers (eventually negative) so that the condition $\mathrm {div} \mathcal {F}=\delta w_\mathcal {F}$ is satisfied.

For each choice of weights $w_e$ on the marked edges, the multiplicity given by the formula of Definition 5.14 is a polynomial in the variables. Then, we need to make a sum over all the possible values of the weights $w_e$ of the marked edges. As for any polynomial $P$ the function $\sum _0^n P(k)$ is still a polynomial in $n$, the result follows by induction.

Finally, the fact that the weights need to be positive integers impose some linear conditions on the variables, and if some weights coincide, we may have to divide by the automorphism group of the floor diagram. Thus, each floor diagram does not always contribute solutions, and we only get a piecewise polynomial function.

Remark 6.8 It is straightforward to extend the result to the case where some of the ends of the tropical curves are fixed but we restrict to the case where they are not to keep relatively easy notation.

6.3 Quasi-modularity

We finish this section by proving the quasi-modularity of the following generating series: let $g$, $d_2$ be fixed integers and $\mu _0$, $\mu _\infty$, $\nu _0$, $\nu _\infty$ be fixed partitions with $\|\mu _0+\nu _0\|=\|\mu _\infty +\nu _\infty \|=d_2$, we consider the generating series for invariants in $\mathbb {T} X_{0,\alpha }$,

\[ F_{g,d_2}(\mu_0,\mu_\infty,\nu_0,\nu_\infty)=\sum_{d_1=1}^\infty N_{g,(d_1,d_2)}^{0}(\mu_0,\mu_\infty,\nu_0,\nu_\infty)y^{d_1}. \]

Quasi-modular functions are some generating functions that generalize modular functions, which are holomorphic functions on the Poincaré half-plane that have a nice behavior under the action of the modular group ${\rm PSL}_2(\mathbb {Z})$ acting by homography. We use the following characterization [Reference Kaneko and ZagierKZ95]: a function is quasi-modular if and only if it expresses as a polynomial in the Eisenstein series $G_2,G_4,G_6$, where $G_{2k}(y)=\sum _{n=0}^\infty (\sum _{d|n}d^k) y^n$ (this convention might differ from the usual one by a constant function and a scaling factor). We also use the fact that quasi-modular functions are stable by the differential operator $D=y({\mathrm {d}}/{\mathrm {d} y})$.

Theorem 6.9 The functions $F_{g,d_2}(\mu _0,\mu _\infty,\nu _0,\nu _\infty )(y)$ are quasi-modular forms.

Remark 6.10 Theorem 6.9 extends the result from [Reference Böhm, Goldner and MarkwigBGM22] for generating series of relative invariants.

Proof. As $d_2$, $g$ and the ramification profile are fixed, up to the choice of the weights of the floors, there are a finite number of floor diagrams. Thus, to show that the generating series are quasi-modular, we only need to show that the generating series for the multiplicities of each floor diagram is a quasi-modular form. For a floor diagram $\mathfrak {D}$, the generating series for the various weights that we can put on the floors is as follows:

\[ W\sum_{a_1,\ldots,a_p} \bigg(\prod_1^p a_i^{\mathrm{val}\mathcal{F}_i-1}\sigma_1(a_i)\bigg)y^{\sum a_i}, \]

where $W=\prod _{e\in \mathfrak {D}^\infty _{m}}w_e \prod _{e\in \mathfrak {D}^b_{m}}w_e^2\prod _{e\in \mathfrak {D}^\infty _{um}}w_e^2 \prod _{e\in \mathfrak {D}^b_{um}}w_e^3$ is the contribution of the elevators, and the floors of $\mathfrak {D}$ are labeled $\mathcal {F}_1,\ldots,\mathcal {F}_p$, having respective weights $a_1,\ldots,a_p$, so that $\sum a_i=d_1$. This factors as

\[ W\prod_{i=1}^p \bigg(\sum_1^\infty a^{\mathrm{val}\mathcal{F}_i-1}\sigma_1(a)y^a\bigg). \]

Each sum under the product can be recognized as $D^{\mathrm {val}\mathcal {F}_i-1}G_2(y)$, where $G_2(y)=\sum _1^\infty \sigma _1(n)y^n$ and $D=y({\mathrm {d}}/{\mathrm {d} y})$. Hence, the generating series for each floor diagram is a quasi-modular form. Thus, so are the generating series for invariants.

Quasi-modularity is a desirable property because it allows for a control of the asymptotics of the coefficients. Moreover, as they express as a polynomial in the Eisensetin series, it means that the knowledge of the degree of this polynomial and a finite number of values is sufficient to recover all values of the invariants.

7. The Fock space approach

The goal of this section is to use the floor diagram approach to relate the invariants considered in this paper to some coefficients of operators on a Fock space. This approach was pioneered by Cooper and Pandharipande [Reference Cooper and PandharipandeCP17] to express Severi degrees of $\mathbb {P}^1\times \mathbb {P}^1$ and some double Hurwitz number. The approach was later generalized by Block and Göttsche [Reference Block and GöttscheBG16a] to both fit the setting of their refined invariants, and to apply for $h$-transverse polygons, which are basically the polygons for which the floor diagram approach works for the Severi degrees. In [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21], the authors use floor diagrams to express descendant invariants of Hirzebruch surfaces in terms of operators on a Fock space, and one point relative descendant invariants.

We describe two settings: one for the classical invariants $N^{\delta,\bullet }_{g,(d_1,d_2)}$, and one for the refined invariants $BG^{\delta,\bullet }_{g,(d_1,d_2)}$.

We consider the Heisenberg algebra $\mathcal {H}$, modeled on the hyperbolic lattice, generated over $\mathbb {Q}$ by $a_n,b_n$ for $n\in \mathbb {Z}$ and the following relations:

\[ [a_n,a_m]=[b_n,b_m]=0 \quad \text{and} \quad [a_n,b_m]=n\delta_{n+m,0}, \]

where $\delta _{i,j}=1$ if $i=j$ and $0$ otherwise is the Kronecker symbol. Its deformation $\mathcal {H}^q$ is the $\mathbb {Q}[q^{\pm 1/2}]$-algebra generated by the same generators, but with the relations

\[ [a_n,a_m]=[b_n,b_m]=0 \quad \text{and} \quad [a_n,b_m]=[n]_q\delta_{n+m,0}. \]

The operators $a_{-n},b_{-n}$ are called creation operators and $a_n,b_n$ are called annihilation operators. By definition, $a_0=b_0=0$. For a partition $\mu$, let

\begin{gather*} a_\mu=\prod_i \frac{(a_i)^{\mu_i}}{\mu_i!},\quad a_{-\mu}=\prod_i \frac{(a_{-i})^{\mu_i}}{\mu_i!},\\ b_\mu=\prod_i \frac{(b_i)^{\mu_i}}{\mu_i!},\quad b_{-\mu}=\prod_i \frac{(b_{-i})^{\mu_i}}{\mu_i!}\in\mathcal{H}\ (\text{respectively, }\mathcal{H}^q). \end{gather*}

The Fock space $\mathcal {F}$ (respectively, $\mathcal {F}^q$) is the free $\mathbb {Q}$-vector space (respectively, $\mathbb {Q}[q^{\pm 1/2}]$-vector space) generated by the creation operators acting on the vacuum $v_\emptyset$. In other words, by definition for any $n>0$ one has $a_nv_\emptyset =b_nv_\emptyset =0$, and $\mathcal {F}$ has a basis indexed by double partitions: let $|\mu,\nu \rangle =a_{-\mu }b_{-\nu }v_\emptyset$. The vectors $|\mu,\nu \rangle$ form a basis of $\mathcal {F}$. The condition $\langle v_\emptyset \mid v_\emptyset \rangle =1$, and $a_n$ (respectively, $b_n$) being adjoint to $a_{-n}$ (respectively, $b_{-n}$) defines a scalar product for which

\[ \langle \mu,\nu \mid \mu',\nu'\rangle = \begin{cases} \displaystyle\frac{I^\mu}{\mu!}\frac{I^\nu}{\nu!}\delta_{\nu,\mu'} & \text{in }\mathcal{F}, \\ \displaystyle\frac{I_q^\mu}{\mu!}\frac{I_q^\nu}{\nu!}\delta_{\nu,\mu'} & \text{in }\mathcal{F}^q.\end{cases} \]

The Fock space $\mathcal {F}$ (respectively, $\mathcal {F}^q$) is graded in the following way: $\bigoplus _n \mathcal {F}_n$, where $\mathcal {F}_n$ is generated by $|\mu,\nu \rangle$ for $\|\mu \|+\|\nu \|=n$. Then $\mathcal {H}$ (respectively, $\mathcal {H}^q$) becomes a graded algebra: $\mathcal {H}=\bigoplus _{n\in \mathbb {Z}}\mathcal {H}_n$, and elements $a_{-n},b_{-n}$ belong to $\mathcal {H}_n$.

We now introduce a family of operators on the Fock space. Let $\delta \in \mathbb {N}$, we set

\begin{align*} H_\delta(t) &= \sum_{k>0}b_{-k}b_{k} + \sum_{s,\mu,\nu,k} t^s s^{|\mu|+|\nu|}\sigma_1(s) k^2 a_{-\mu}a_\nu b_k \\ & \quad + \sum_{s,\mu,\nu,k} t^s s^{|\mu|+|\nu|}\sigma_1(s) k^2 b_{-k}a_{-\mu}a_\nu , \end{align*}

and its deformation

\begin{align*} H^q_\delta(t) &= \sum_{k>0}b_{-k}b_{k} + \sum_{s,\mu,\nu,k} t^s \bigg[\sum_{dl=s} d^{|\mu|+|\nu|}\prod \bigg(\frac{[li]_q}{[i]_q}\bigg)^{\mu_i+\nu_i}\bigg] k[k]_q a_{-\mu}a_\nu b_k \\ & \quad + \sum_{s,\mu,\nu,k} t^s \bigg[\sum_{dl=s} d^{|\mu|+|\nu|}\prod \bigg(\frac{[li]_q}{[i]_q}\bigg)^{\mu_i+\nu_i}\bigg] k[k]_q b_{-k}a_{-\mu}a_\nu , \end{align*}

where in each case, the first sum over the tuples $(s,\mu,\nu,k)$ is with $s,k>0$ and such that

\[ \|\mu\|+s\delta=\|\nu\|+k, \]

while the second is over those such that

\[ \|\mu\|+s\delta+k=\|\nu\|. \]

The various monomials in the function $H_\delta$ correspond to the various vertices that can occur in a floor diagram.

  • The term $b_{-k}b_k$ corresponds to a marked point on an elevator of weight $k$.

  • The term $a_{-\mu }a_\nu b_k$ corresponds to a floor with $|\mu |$ elevators leaving the floor, $|\nu |$ arriving on it, and a remaining elevator of weight $k$. In the setting of the floor diagrams, it is the unique elevator that goes in the direction of the unique unbounded end of the complement of marked points on elevators. As its position is fixed by the constraints, it behaves like a fixed elevator for the next floor that it meets.

  • Similarly for the term $b_{-k}a_{-\mu }a_\nu$ but with the specific elevator on the other side.

  • The positive integer $s$ corresponds to the weight of the floor. In this way, the previous relation on the indices of the sum is just the condition on the divergence of a floor, which comes from the balancing condition. The $s^{|\mu |+|\nu |}\sigma _1(s)$ is the floor multiplicity appearing in Definition 5.14, and the $k^2$ part of the multiplicity of the specific elevator. Their refined counterpart appears for the deformed operator $H_\delta ^q(t)$.

Remark 7.1 Note how the monomials in the expressions of the operators $H_\delta (t)$ and $H_\delta ^q(t)$ correspond to the terms in the Caporaso–Harris formula.

Remark 7.2 Sometimes, one includes an additional variable $u$, for instance in [Reference Cooper and PandharipandeCP17]. It is used to recover the Euler characteristic of the graph encoded by the floor diagram. In the classical case, one then sets

\begin{align*} \widetilde{H}_\delta(t,u) &= \sum_{k>0}b_{-k}b_{k} + \sum_{s,\mu,\nu,k} t^s u^{|\mu|} s^{|\mu|+|\nu|}\sigma_1(s) k^2 a_{-\mu}a_\nu b_k \\ & \quad + \sum_{s,\mu,\nu,k} t^s u^{|\mu|+1} s^{|\mu|+|\nu|}\sigma_1(s) k^2 b_{-k}a_{-\mu}a_\nu . \end{align*}

Precisely, the $b_{-k}b_k$ correspond to a half-closed interval, which is of Euler characteristic $0$, and each monomial in the other sum corresponds to a floor which encodes a graph of genus $1$, including the leaves of the elevators ending on the floor, but not the one that starts from the floor. The exponent of $u$ is then precisely the opposite of the Euler characteristic. However, this additional variable is not really needed due to the necessary relation between the number of marked points $n$, the genus $g$ and the bidegree $(d_1,d_2)$: $n=\delta d_1+2d_2+g-1$.

Remark 7.3 Since the operators do not all commute, one needs to care about the order of the operators in the monomials. In particular, this prevents to write the two sums as a unique sum with $k\in \mathbb {Z}\backslash \{0\}$ since the position of the $b$ operator is important.

We now state the main theorem of the section. Concretely, it means that the invariants, relative invariants, and their refined counterparts can be expressed as some coefficients of powers of the operators $H_\delta (t,u)$ (respectively, $H^q_\delta (t,u)$).

Theorem 7.4 We have

\begin{align*} N^{\delta,\bullet}_{g,(d_1,d_2)} &= \langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}} H_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle,\\ BG^{\delta,\bullet}_{g,(d_1,d_2)}& = \langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}} H^q_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle, \end{align*}

and

\begin{align*} N^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty) &= \frac{\mu_\infty !}{I^{\mu_\infty+\nu_\infty}}\frac{\mu_0!}{I^{\mu_0+\nu_0}} \langle \mu_\infty,\nu_\infty \mid \mathrm{Coeff}_{t^{d_1}} H_\delta(t)^{|\nu_0|+|\nu_\infty|+g-1} \mid \mu_0,\nu_0 \rangle,\\ BG^{\delta,\bullet}_{g,(d_1,d_2)}(\mu_0,\mu_\infty,\nu_0,\nu_\infty) &= \frac{\mu_\infty !}{I_q^{\mu_\infty+\nu_\infty}}\frac{\mu_0!}{I_q^{\mu_0+\nu_0}} \langle \mu_\infty,\nu_\infty \mid \mathrm{Coeff}_{t^{d_1}} H^q_\delta(t)^{|\nu_0|+|\nu_\infty|+g-1} \mid \mu_0,\nu_0 \rangle. \end{align*}

The operator $H_\delta (t)$ is a power series in $t$, and $\mathrm {Coeff}_{t^{d_1} }$ means that we just take the corresponding coefficient. Similarly for the deformed version.

Remark 7.5 In view of Remark 7.1, the Caporaso–Harris formula corresponds just to expanding one term of the product $H_\delta (t)^{\delta d_1+2d_2+g-1}$ in Theorem 7.4.

Remark 7.6 With the $u$ variable to recover the genus, the first equality in the theorem becomes, for instance,

\[ N^{\delta,\bullet}_{g,(d_1,d_2)} = \langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}u^{g+d_2-1}} H_\delta(u,t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle. \]

Remark 7.7 Note that in the expression of $H_\delta$, the assumption on the indices of each sum ensures degree of the monomial $a_{-\mu }a_\nu b_k$ (respectively, $b_{-k}a_{-\mu }a_\nu$) is equal to $\delta s$. Thus, $H_\delta$ belongs to $\sum \mathcal {H}_{-\delta s}t^s$, and so do its powers $H_\delta ^n$. In particular,

\[ \langle 0,1^{d_2} \mid H_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle = t^{d_1}\langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}} H_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle, \]

since every other term in the series is $0$ by degree consideration.

As in [Reference Cooper and PandharipandeCP17] and [Reference Block and GöttscheBG16a], these relations allow us to find some expressions of the generating series of the invariants.

Corollary 7.8 One has the following generating series:

\begin{align*} \sum_{d_1,d_2,g}N_{g,(d_1,d_2)}^{\delta,\bullet} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} &= \langle e^{a_1 F} e^{QH_\delta(E_0)}e^{a_{-1}} \rangle ,\\ \sum_{d_1,d_2,g} BG_{g,(d_1,d_2)}^{\delta,\bullet} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} &= \langle e^{a_1 F} e^{QH^q_\delta(E_0)}e^{a_{-1}} \rangle. \end{align*}

Proof. We have the following. On the first line, we use Theorem 7.4, on the second we replace $|0,1^{\delta d_1+d_2}\rangle$ by $e^{a_{-1}}v_\emptyset$ since only one term of the exponential series contributes to the coefficient for degree reasons, and we set $n=\delta d_1+2d_2+g-1>0$.

\begin{align*} & \sum_{d_1,d_2,g} N_{g,(d_1,d_2)}^{\delta,\bullet} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} \\ & \quad = \sum_{d_1,d_2,g} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} \langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}} H_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle\\ & \quad = \sum_{d_1,d_2,n} \frac{1}{n!} E_0^{d_1}F^{d_2} \langle 0,1^{d_2} \mid \mathrm{Coeff}_{t^{d_1}} (QH_\delta(t))^{n} e^{a_{-1}}\mid 0,0 \rangle \\ & \quad = \sum_{d_2,n} F^{d_2} \biggl \langle 0,1^{d_2} \mid \frac{(QH_\delta(E_0))^{n}}{n!} e^{a_{-1}}\mid 0,0\biggr\rangle \\ & \quad = \sum_{d_2} F^{d_2} \langle 0,1^{d_2} \mid e^{QH_\delta(E_0)} e^{a_{-1}} \mid 0,0 \rangle \\ & \quad = \langle e^{a_1 F} e^{QH_\delta(E_0)}e^{a_{-1}} \rangle. \end{align*}

The computation is verbatim for refined invariants.

Similarly, one can compute generating series for relative invariants. For $\mu$ a partition, let $U_0^\mu =\prod _i U_{0i}^{\mu _i}$ and similarly for $V_0$, $U_\infty$ and $V_\infty$. Then, as noted in [Reference Block and GöttscheBG16a], for indeterminates $U$ and $V$, one has

\[ \exp\bigg( \frac{1}{n}(b_{-n}U + a_{-n}V)\bigg)v_\emptyset = \sum_{\mu,\nu}\frac{1}{I^{\mu+\nu}}U^\mu V^\nu |\mu,\nu\rangle. \]

Corollary 7.9 One has the following generating series:

\begin{align*} & \sum_{d_1,d_2,g,\mu,\nu} N_{g,(d_1,d_2)}^{\delta,\bullet}(\mu_0,\mu_\infty,\nu_0,\nu_\infty) \frac{Q^{|\nu_0|+|\nu_\infty|+g-1}}{(|\nu_0|+|\nu_\infty|+g-1)!} E_0^{d_1}F^{d_2} \\ & \quad = \bigl \langle e^{F\sum (({b_{n}U_{\infty n}+a_{n}V_{\infty n}})/{n})} e^{QH_\delta(E_0)}e^{\sum (({b_{-n}U_{0n}+a_{-n}V_{0n}})/{n})}\bigr\rangle . \end{align*}

To get the generating series of invariants for irreducible curves, as stated in [Reference Block and GöttscheBG16a], one only needs to take the logarithm. This comes from the fact that the number of reducible curves is obtained by taking union of different irreducible components.

Corollary 7.10 One has the following relations:

\begin{align*} \sum_{d_1,d_2,g} N^\delta_{g,(d_1,d_2)} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} &= \log\langle e^{a_1 F} e^{QH_\delta(E_0)} e^{a_{-1}} \rangle ,\\ \sum_{d_1,d_2,g} BG^\delta_{g,(d_1,d_2)} \frac{Q^{\delta d_1+2d_2+g-1}}{(\delta d_1+2d_2+g-1)!} E_0^{d_1}F^{d_2} &= \log\langle e^{a_1 F} e^{QH^q_\delta(E_0)} e^{a_{-1}} \rangle . \end{align*}

Proof. If $S$ is the generating series for irreducible invariants, then the generating series for reducible invariants with $r$ components is exactly $({1}/{r!})S^r$. Taking the sum, we get that the generating series for reducible invariants is exactly $e^S$. The result follows.

Remark 7.11 Note that in this setting, the superabundant loops are not considered as curves since they do not appear in any $\mathbb {T} X_{0,\alpha }$. To get the corresponding generating series, one would have to multiply by their generating series. This corresponds to compute the invariants $N_{g,(d,0)}^{\delta,\bullet }$ for $\mathbb {C} X_{0,\alpha }$, where $\alpha$ is a torsion element, and include them as possible components. These numbers are $0$ for generic $\alpha$, but might be non-zero if $\alpha$ is torsion.

To prove Theorem 7.4, we introduce Feynman graphs. Their main interest is that they are related to floor diagrams relatively easily, and that they provide a combinatorial interpretation of the vacuum expectation of monomials in the Heisenberg algebra, thus relating floor diagrams counts to vacuum expectations of operators. We follow what happens in [Reference Cavalieri, Johnson, Markwig and RanganathanCJMR21].

Let $P=m_\infty m_n \cdots m_1 m_0$ be a product of monomials in the Heisenberg algebra such that:

  • all the $m_i$ are monomials in the $a_k$ and $b_k$;

  • $m_0$ contains only $a_k$ and $b_k$ with negative indices;

  • $m_\infty$ contains only $a_k$ and $b_k$ with positive indices;

  • for all monomials $m_i$, every operator with a negative index stands left of an operator with a positive index.

The goal is to compute the vacuum expectation $\langle P\rangle$. One associates a family of graphs called Feynman graphs to any product $P$ in the following way:

  1. To any monomial $m_i$, associate a germ of graph with exactly one vertex, a thick edge of weight $k$ leaving the vertex on the left (respectively, right) for each $b_k$ (respectively, $b_{-k}$), and a thin edge of weight $k$ to the left (respectively, right) for each $a_k$ (respectively, $a_{-k}$).

  2. For each $b_{-k}$ (respectively, $a_{-k}$) in $m_0$, we associate a germ with a thick (respectively, thin) edge of weight $k$ pointing to the right.

  3. For each $b_k$ (respectively, $a_k$) in $m_\infty$, we associate a germ with a unique vertex and a thick (respectively, thin) edge of weight $k$ pointing to the left.

  4. The germs are ordered by the order on the indices of the $m_i$.

  5. A Feynman graph is any (marked, weighted, ordered) graph obtained by gluing pairs of half-edges such that no half-edge is left alone. A gluing between two germs of edges can occur if:

    • it connects a right half-edge to a left half-edge of a vertex on its right;

    • one of the half-edge is thickened and the other is thin;

    • they share the same weight.

The following theorem is Proposition 5.1 in [Reference Block and GöttscheBG16a]. It relates the vacuum expectation of a product $P$ to the Feynman graphs obtained from $P$.

Proposition 7.12 (Wick's theorem)

The vacuum expectation $\langle P\rangle$ for a product of monomials $P$ is equal to the weighted sum of all Feynman graphs for $P$, where each Feynman graph is weighted by the product of weights of all edges (interior edges and ends).

Remark 7.13 Note that the weight of an edge is $k\in \mathcal {N}$ in the classical setting, and $[k]_q\in \mathbb {Z}[q^{\pm 1/2}]$ in the refined setting.

Proof. We only give a sketch of proof and leave the bookkeeping task to the reader. When trying to compute the vacuum expectation, take any operator $a_k$ or $b_k$ with a positive entry. assume it is some $a_k$. We move it to the right part of the product. It commutes to every other operator except if it encounters some $b_{-k}$, where by the commutation relation we then have

\[ a_k b_{-k}=k+b_{-k}a_k. \]

Thus, the vacuum expectation that we are trying to compute becomes a sum of two new vacuum expectations:

  • one where $a_k$ and $b_{-k}$ are deleted and replaced by a factor $k$;

  • one where we have replaced $a_kb_{-k}$ with $b_{-k}a_k$.

In the end, when $a_k$ is moved completely to the right, we get $a_k v_\emptyset =0$. Thus, we exactly get a sum of vacuum expectations for every $b_{-k}$ to the right of $a_k$. This corresponds to drawing an edge between the two germs of edges corresponding to $a_k$ and $b_{-k}$. Note that the order between the monomials and the germs of edges on the graph is reversed since the graph is drawn from left to right when the monomials are read from right to left. Therefore, moving every monomial with a positive entry to the right, the vacuum expectation expresses as a sum over all the possibilities to connect an operator $a_k$ (respectively, $b_k$) to a $b_{-k}$ (respectively, $a_{-k}$) on its right. These are exactly the Feynman's graphs. They are counted with a weight equal to the product of the weights of the edges.

Proof of Theorem 7.4 We only treat the classical case. The refined case is handled the same way. We consider the following vacuum expectation:

\[ \langle 0,1^{d_2}\mid \mathrm{Coeff}_{t^{d_1}}H_\delta(t)^{\delta d_1+2d_2+g-1} \mid 0,1^{\delta d_1+d_2} \rangle . \]

First, replace $|0,1^{\delta d_1+d_2}\rangle$ by $({a_{-1}^{\delta d_1+d_2}}/{(\delta d_1+d_2)!})|v_\emptyset \rangle$ and $\langle 0,1^{d_2}|$ by $\langle v_\emptyset |({a_1^{d_2}}/{d_2!})$. Then we expand the product $H_\delta (t)$, and remember only the $t^{d_1}$ term. Proposition 7.12 asserts that it can be expressed as a sum over suitable Feynman graphs, with some multiplicity coming from the coefficients of the monomials in the expression of $H_\delta$. More precisely, after the expansion of the product, one gets a sum of monomials $P$ of the form $m(P)m_\infty m_{\delta d_1+2d_2+g-1}\cdots m_1 m_0$, where:

  • $m_\infty =a_1^{d_2}$;

  • $m_0=a_{-1}^{\delta d_1+d_2}$;

  • every other $m_i$ is either some $b_{-k}b_k$, some $b_{-k}a_{-\mu }a_\nu$ or some $a_{-\mu }a_\nu b_k$;

  • $m(P)$ is ${1}/{d_2!(\delta d_1+d_2)!}$ times the product of the coefficients of the chosen monomials $m_i$ in the expansion.

Clearly, the Feynman graphs for the product of monomials in the previous expansion correspond exactly to the marked floor diagrams from § 5.1. One just needs to check that their multiplicities are identical. The multiplicity from Definition 5.14 gives a multiplicity $w^{\mathrm {val}(F)-1}\sigma _1(w)$ for every floor $\mathcal {F}$ of weight $w$ in the diagram, and a product on the elevators of the diagram. On the Feynman graph side, we recover the floors multiplicities in the term $s^{|\mu |+|\nu |}\sigma _1(s)$. Using Proposition 7.12, every edge of weight $k$ brings a contribution $k$. This matches the contribution in the multiplicity from Definition 5.14, except for the edges that are not marked. The missing factor $k^2$ from these edges comes from the coefficients in $H_\delta (t)$.

The proof of the formula for relative invariants is readily the same but with more bookkeeping, which is thus left to the reader. The only difference is that one needs to add a factor $({\mu _0!}/{I^{\mu _0+\nu _0}})({\mu _\infty !}/{I^{\mu _\infty +\nu _\infty }})$ to compensate for the weight of the unbounded ends in the formula.

Acknowledgements

The author thanks H. Markwig for suggesting the problem and for numerous discussions during the week at Oberwolfach concerning floor diagrams, and J. Rau for helping to make some nice images of tropical curves inside a cylinder. The author also thanks the other organizers of this conference, R. Cavalieri and D. Ranganathan. The author thanks the anonymous referee for helpful remarks, and Erwan Brugallé and Ilya Tyomkin for discussions about the dimension of the moduli space of curves.

Conflicts of Interest

None.

References

Ardila, F. and Brugallé, E., The double Gromov–Witten invariants of Hirzebruch surfaces are piecewise polynomial, Int. Math. Res. Not. IMRN 2017 (2017), 614641.CrossRefGoogle Scholar
Arroyo, A., Brugallé, E. and Lopez De Medrano, L., Recursive formulas for Welschinger invariants of the projective plane, Int. Math. Res. Not. IMRN 2011 (2011), 11071134.Google Scholar
Blechman, L. and Shustin, E., Refined descendant invariants of toric surfaces, Discrete Comput. Geom. 62 (2019), 180208.CrossRefGoogle Scholar
Block, F. and Göttsche, L., Fock spaces and refined severi degrees, Int. Math. Res. Not. IMRN 2016 (2016), 65536580.CrossRefGoogle Scholar
Block, F. and Göttsche, L., Refined curve counting with tropical geometry, Compos. Math. 152 (2016), 115151.CrossRefGoogle Scholar
Blomme, T., Refined count of real oriented rational curves, Preprint (2021), arXiv:2107.07286.Google Scholar
Blomme, T., Refined count for rational tropical curves in arbitrary dimension, Math. Ann. 382 (2022), 11991244.CrossRefGoogle Scholar
Böhm, J., Goldner, C. and Markwig, H., Tropical mirror symmetry in dimension one, Preprint (2018), arXiv:1809.10659.Google Scholar
Böhm, J., Goldner, C. and Markwig, H., Counts of (tropical) curves in $E\times \mathbb {P}1$ and Feynman integrals, Ann. Inst. Henri Poincaré D: Comb. Phys. Interact. 9 (2022), 121158.CrossRefGoogle Scholar
Bousseau, P., Tropical refined curve counting from higher genera and lambda classes, Invent. Math. 215 (2019), 179.CrossRefGoogle ScholarPubMed
Brugallé, E., Floor diagrams relative to a conic, and GW–W invariants of del Pezzo surfaces, Adv. Math. 279 (2015), 438500.CrossRefGoogle Scholar
Brugallé, E. and Jaramillo Puentes, A., Polynomiality properties of tropical refined invariants, Comb. Theory 2(2) (2022), Paper No.~1.Google Scholar
Brugallé, E. and Mikhalkin, G., Enumeration of curves via floor diagrams, C. R. Math. 345 (2007), 329334.CrossRefGoogle Scholar
Brugallé, E. and Mikhalkin, G., Floor decompositions of tropical curves: the planar case, Preprint (2008), arXiv:0812.3354.Google Scholar
Brugallé, E. and Shaw, K., A bit of tropical geometry, Amer. Math. Monthly 121 (2014), 563589.CrossRefGoogle Scholar
Caporaso, L., Gonality of algebraic curves and graphs, in Algebraic and complex geometry (Springer, 2014), 77108.CrossRefGoogle Scholar
Cavalieri, R., Johnson, P. and Markwig, H., Tropical Hurwitz numbers, J. Algebraic Combin. 32 (2010), 241265.CrossRefGoogle Scholar
Cavalieri, R., Johnson, P., Markwig, H. and Ranganathan, D., A graphical interface for the Gromov-Witten theory of curves, in Algebraic geometry: Salt Lake City 2015, Proceedings of Symposia in Pure Mathematics, vol. 97 (American Mathematical Society, Providence, RI, 2018), 139167.CrossRefGoogle Scholar
Cavalieri, R., Johnson, P., Markwig, H. and Ranganathan, D., Counting curves on Hirzebruch surfaces: tropical geometry and the Fock space, Math. Proc. Cambridge Philos. Soc., 171 (2021), 165205.CrossRefGoogle Scholar
Cooper, Y. and Pandharipande, R., A Fock space approach to Severi degrees, Proc. Lond. Math. Soc. 114 (2017), 476494.CrossRefGoogle Scholar
Gathmann, A. and Markwig, H., The Caporaso–Harris formula and plane relative Gromov–Witten invariants in tropical geometry, Math. Ann. 338 (2007), 845868.CrossRefGoogle Scholar
Gathmann, A. and Markwig, H., The numbers of tropical plane curves through points in general position, J. Reine Angew. Math. 2007 (2007), 155177.CrossRefGoogle Scholar
Göttsche, L. and Schroeter, F., Refined broccoli invariants, J. Algebraic Geom. 28 (2019), 141.CrossRefGoogle Scholar
Göttsche, L. and Shende, V., Refined curve counting on complex surfaces, Geom. Topol. 18 (2014), 22452307.CrossRefGoogle Scholar
Goulden, I. P., Jackson, D. M. and Vakil, R., Towards the geometry of double Hurwitz numbers, Adv. Math. 198 (2005), 4392.CrossRefGoogle Scholar
Gräfnitz, T., Ruddat, H. and Zaslow, E., The proper Landau-Ginzburg potential is the open mirror map, Preprint (2022), arXiv:2204.12249.Google Scholar
Griffiths, P. and Harris, J., Principles of algebraic geometry (John Wiley & Sons, 2014).Google Scholar
Hartshorne, R., Algebraic geometry, vol. 52 (Springer, 2013).Google Scholar
Itenberg, I. and Mikhalkin, G., On Block–Göttsche multiplicities for planar tropical curves, Int. Math. Res. Not. IMRN 2013 (2013), 52895320.CrossRefGoogle Scholar
Itenberg, I. and Shustin, E., Real enumerative invariants relative to the anti-canonical divisor and their refinement, Preprint (2023), arXiv:2303.06203.Google Scholar
Kaneko, M. and Zagier, D., A generalized Jacobi theta function and quasimodular forms, in The moduli space of curves (Springer, 1995), 165172.CrossRefGoogle Scholar
Kleiman, S. L. and Shende, V. V., On the Göttsche threshold, in A celebration of algebraic geometry, with an appendix by Ilya Tyomkin, Clay Mathematics Proceedings, vol. 18 (American Mathematical Society, Providence, RI, 2013), 429449.Google Scholar
Mandel, T. and Ruddat, H., Descendant log Gromov-Witten invariants for toric varieties and tropical curves, Trans. Amer. Math. Soc. 373 (2020), 11091152.CrossRefGoogle Scholar
Mikhalkin, G., Enumerative tropical algebraic geometry in $\mathbb {R}^2$, J. Amer. Math. Soc. 18 (2005), 313377.CrossRefGoogle Scholar
Mikhalkin, G., Quantum indices and refined enumeration of real plane curves, Acta Math. 219 (2017), 135180.CrossRefGoogle Scholar
Mikhalkin, G. and Fomin, S., Labeled floor diagrams for plane curves, J. Eur. Math. Soc. 12 (2010), 14531496.Google Scholar
Mikhalkin, G. and Zharkov, I., Tropical curves, their jacobians and theta functions, Curves Abelian Varieties 465 (2008), 203230.CrossRefGoogle Scholar
Nishinou, T., Realization of tropical curves in abelian surfaces, Preprint (2020), arXiv:2007.16148.Google Scholar
Nishinou, T. and Siebert, B., Toric degenerations of toric varieties and tropical curves, Duke Math. J. 135 (2006), 151.CrossRefGoogle Scholar
Schroeter, F. and Shustin, E., Refined elliptic tropical enumerative invariants, Israel J. Math. 225 (2018), 817869.CrossRefGoogle Scholar
Shadrin, S., Shapiro, M. and Vainshtein, A., Chamber behavior of double Hurwitz numbers in genus 0, Adv. Math. 217 (2008), 7996.CrossRefGoogle Scholar
Shustin, E., A tropical approach to enumerative geometry, St. Petersburg Math. J. 17 (2006), 343375.CrossRefGoogle Scholar
Tyomkin, I., Tropical geometry and correspondence theorems via toric stacks, Math. Ann. 353 (2012), 945995.CrossRefGoogle Scholar
Tyomkin, I., Enumeration of rational curves with cross-ratio constraints, Adv. Math. 305 (2017), 13561383.CrossRefGoogle Scholar
Figure 0

Figure 1. Examples of application of the cutting process for a curve inside $\mathbb {T} X_{0,\alpha }$ in (a) and in $\mathbb {T} X_1$ for (b).

Figure 1

Figure 2. Examples of tropical curves (a) and (b) inside $\mathbb {T} E\times \mathbb {R}$ and (c) inside $\mathbb {T} X_{0,\alpha }$ for some non-zero $\alpha$.

Figure 2

Figure 3. Examples of sections inside $\mathbb {T} X_1$. In (a), the chart has not been chosen so that points having the same height get identified. In (b) it is the case.

Figure 3

Figure 4. Examples of tropical curves (a) and (b) inside $\mathbb {T} X_1$ and (c) in $\mathbb {T} X_2$.

Figure 4

Figure 5. Example of a superabundant loop inside $\mathbb {T} X_{0,l/2}$.

Figure 5

Figure 6. A superabundant loop of weight $2$ and its deformations when changing the gluing parameter $\alpha$.

Figure 6

Figure 7. The fan $\Sigma$ defining the variety $\mathcal {T}$.

Figure 7

Figure 8. Four floor diagrams with markings.

Figure 8

Figure 9. Floor diagrams of genus $2$ and bidegree $(d,2)$ in $\mathbb {T} X_0$ with their markings.

Figure 9

Figure 10. Floor diagrams of genus $2$ and bidegree $(2,0)$ and $(2,1)$ in $\mathbb {T} X_1$ with their markings.

Figure 10

Figure 11. Floor diagrams used for the computation of $N^0_{3,(d,w)}(0,0,w^1,w^1)$.