We have constructed a computer controlled telescope using a 0.36-m f/11 Celestron optical tube assembly for teaching and research applications. We have constructed a heavy duty fork-type equatorial mount fitted with precision machined 24 inch drive disks for both axes. These are friction driven by stepper motors through one inch rollers. We have used an open loop control system triggerable by an ST-4 CCD camera to acquire and track any target object. Our telescope can home in on any target within a range of two arc-minutes. We have employed a commercial stepper motor controller card for which we have written a user friendly pc based telescope control software in C. Photometry using a solid state photometer, and imaging by an ST-6 CCD camera are possible.

We consider that this project is suitable for those wishing to construct some parts of a telescope and understand the principles of operation. A simpler model of this telescope could use DC motors instead of stepper motors. We shall be happy to send our design diagrams and details to those interested. This project was funded by the DST, and was assisted by IUCAA, Pune.