Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-25T00:20:56.957Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental device to test an iron losses model by a thermal method

Published online by Cambridge University Press:  25 August 2004

B. Ben Abdallah ,
R. Glises  and
J. P. Masson
B. Ben Abdallah
Affiliation:
CEGELY, Université Claude Bernard Lyon, 43 boulevard du 11 novembre 1918, 69622 Villeurbanne Cedex, France
R. Glises*
Affiliation:
UTBM-L2ES, rue Thierry MIEG, Bât. F, 90010 Belfort, France
J. P. Masson
Affiliation:
CEGELY, Université Claude Bernard Lyon, 43 boulevard du 11 novembre 1918, 69622 Villeurbanne Cedex, France
*
raynal.glises@univ-fcomte.fr
Get access

Abstract

The experimental determination of the iron losses created in a localized zone of an electric machine is a difficult operation. We try to verify and to valid by local thermal measurements the sum of local iron losses. To realize our verification, we determine the optimal measurement conditions by calculation and simulation before the realization of a prototype specially designed for this operation. This structure represents a part of an electric machine, with emphasis on inhomogeneous flux distribution areas. This device permits to obtain an experimental temperature mapping which is compared to the calculated temperature distribution obtained by finite elements modelling.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 28 , Issue 3 , December 2004 , pp. 347 - 353
Copyright
© EDP Sciences, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bertotti, G., Pasquale, M., IEEE Trans. Magn. 28, 2787 (1992) CrossRef
C. Cester, Étude des pertes magnétiques supplémentaires dans les machines asynchrones alimentées par onduleur à modulations de largeur d'impulsion, Thèse de Doctorat, Institut National Polytechnique de Grenoble, 21 juin 1996
Raulet, M.A., Masson, J.P., Gaude, D., J. Phys. IV France 8, 619 (1998) CrossRef
M.A. Raulet, J.P. Masson, Implementation of a dynamic hysteresis generator in the magnetic field diffusion equation. Electric and magnetic fields, Marseilles, May 1998
B. Ben Abdallah, Conception et tests d'un démonstrateur dédié à la validation de modèles locaux de pertes fer par méthode thermique, Thèse de Doctorat, Université Lyon I, 14 October 2002, Chap. 2.5
C. Chalesle, J.M. Kaufmann, F.M. Sargos, in An experimental study of the optimal slotting design in reluctance motors, International Conference on Electrical Machines, Lausanne, Switzerland, 18-24 September 1984, Proceedings part 1, pp. 277–280
M. Necati Özisik, Heat Transfer, a basic approach (Mc Graw-Hill International Editions, 1985)