Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Kim, Ki Soo
Kim, Won Tae
Lee, Dai Gil
and
Jun, Eui Jin
1992.
Optimal tubular adhesive-bonded lap joint of the carbon fiber epoxy composite shaft.
Composite Structures,
Vol. 21,
Issue. 3,
p.
163.
Kim, Ki Soo
Lee, Dai Gil
Kwak, Yoon Keun
and
Namgung, Suk
1992.
Machinability of carbon fiber-epoxy composite materials in turning.
Journal of Materials Processing Technology,
Vol. 32,
Issue. 3,
p.
553.
Lee, Dai Gil
Jeong, Kwang Seop
Kim, Ki Soo
and
Kwak, Yoon Keun
1993.
Development of the anthropomorphic robot with carbon fiber epoxy composite materials.
Composite Structures,
Vol. 25,
Issue. 1-4,
p.
313.
Soo Hyun Kim
Kab Il Kim
and
Kyihwan Park
1994.
Modeling and digital control of direct drive arm.
p.
555.
Kim, Young Goo
Jeong, Kwang Seop
Lee, Dai Gil
and
Oh, Park Kyoun
1995.
A study on the composite screw rotors for superchargers.
Composite Structures,
Vol. 32,
Issue. 1-4,
p.
575.
Kim, Young Goo
Lee, Dai Gil
and
Oh, Park Kyoun
1995.
Manufacturing of the composite screw rotors by resin transfer molding.
Journal of Materials Processing Technology,
Vol. 48,
Issue. 1-4,
p.
641.
Jeong, Kwang Seop
Lee, Dai Gil
and
Kwak, Yoon Keun
1995.
Experimental investigation of the dynamic characteristics of carbon fiber epoxy composite thin beams.
Composite Structures,
Vol. 33,
Issue. 2,
p.
77.
Choi, Jin Kyung
and
Lee, Dai Gil
1995.
Experimental investigation of the static torque transmission capabilities of the adhesively bonded single lap joints.
Journal of Materials Processing Technology,
Vol. 48,
Issue. 1-4,
p.
341.
Park, Kyu Yeol
Choi, Jin Ho
and
Lee, Dai Gil
1995.
Delamination-Free and High Efficiency Drilling of Carbon Fiber Reinforced Plastics.
Journal of Composite Materials,
Vol. 29,
Issue. 15,
p.
1988.
Kim, Won Tae
and
Lee, Dai Gil
1995.
Torque transmission capabilities of adhesively bonded tubular lap joints for composite drive shafts.
Composite Structures,
Vol. 30,
Issue. 2,
p.
229.
Park, Kyu Ycol
Lee, Dai Gil
and
Nakagawa, Takco
1995.
Mirror surface grinding characteristics and mechanism of carbon fiber reinforced plastics.
Journal of Materials Processing Technology,
Vol. 52,
Issue. 2-4,
p.
386.
Kim, Young Goo
Jeong, Kwang Seop
Lee, Dai Gil
and
Lee, Jae Won
1996.
Development of the composite third robot arm of the six-axis articulated robot manipulator.
Composite Structures,
Vol. 35,
Issue. 4,
p.
331.
Cheon, Seong Sik
Lee, Dai Gil
and
Jeong, Kwang Seop
1997.
Composite side-door impact beams for passenger cars.
Composite Structures,
Vol. 38,
Issue. 1-4,
p.
229.
Oh, Je Hoon
Kim, Young Goo
and
Lee, Dai Gil
1997.
Optimum bolted joints for hybrid composite materials.
Composite Structures,
Vol. 38,
Issue. 1-4,
p.
329.
Cho, Durk Hyun
Lee, Dai Gil
and
Choi, Jin Ho
1997.
Manufacture of one-piece automotive drive shafts with aluminum and composite materials.
Composite Structures,
Vol. 38,
Issue. 1-4,
p.
309.
Cho, Durk Hyun
and
Lee, Dai Gil
1998.
Manufacturing of Co-Cured Composite Aluminum Shafts with Compression during Co-Curing Operation to Reduce Residual Thermal Stresses.
Journal of Composite Materials,
Vol. 32,
Issue. 12,
p.
1221.
Cheon, Seong Sik
Lim, Tae Seong
and
Lee, Dai Gil
1999.
Impact energy absorption characteristics of glass fiber hybrid composites.
Composite Structures,
Vol. 46,
Issue. 3,
p.
267.
Kang, Bong Soo
Kim, Soo Hyun
Kwak, Yoon Keun
and
Smith, Craig C.
1999.
Robust Tracking Control of a Direct Drive Robot.
Journal of Dynamic Systems, Measurement, and Control,
Vol. 121,
Issue. 2,
p.
261.
Oh, Je Hoon
Lee, Dai Gil
and
Kim, Hyun Surk
1999.
Composite robot end effector for manipulating large LCD glass panels.
Composite Structures,
Vol. 47,
Issue. 1-4,
p.
497.
Gil Lee, Dai
Sup Lee, Chang
Hoon Oh, Je
and
Su Jeon, Han
1999.
Composite heddle frame for high-speed looms.
Composite Structures,
Vol. 47,
Issue. 1-4,
p.
507.