Article contents
Novel Laser Ablation Sampling Device for the Rapid Radiocarbon Analysis of Carbonate Samples by Accelerator Mass Spectrometry
Published online by Cambridge University Press: 17 February 2016
Abstract
Conventional radiocarbon analysis of carbonate records with accelerator mass spectrometry (AMS) is time consuming and the achievable spatial resolution is limited, because individual samples have to be taken and need to be converted to graphite for the measurement. A new laser ablation (LA) in situ sampling technique for rapid online 14C analyses of carbonate records by AMS is presented. By focusing a 193-nm ArF excimer laser on carbonate samples, carbon dioxide is generated and can directly be introduced into the gas ion source of an AMS. A dedicated LA cell for AMS was constructed in a way that combines rapid gas exchange with the capacity to carry sample specimen with maximum dimensions of 15×2.5×1.5 cm3. With the presented setup, negative carbon ion currents up to 20 µA were achieved. A low 14C background of 0.011±0.002 F14C was observed on 14C-free marble and different standard and reference materials could be well reproduced within errors. The novel technique allows scanning carbonate samples continuously over several cm per hour with achievable measurement precisions of less than 1% for modern samples. This approach allows acquiring highly spatially resolved 14C records at a far higher rate than with any currently available method.
- Type
- Research Article
- Information
- Copyright
- © 2016 by the Arizona Board of Regents on behalf of the University of Arizona
References
REFERENCES
- 11
- Cited by