Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-12-07T05:47:20.687Z Has data issue: false hasContentIssue false

Low-cost Rolled X-ray Prism Lenses to increase photon flux density in diffractometry experiments

Published online by Cambridge University Press:  15 April 2014

H. Vogt*
Affiliation:
Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
A. Last
Affiliation:
Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
J. Mohr
Affiliation:
Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
F. Marschall
Affiliation:
Karlsruhe Institute of Technology (KIT), Institute of Microstructure Technology (IMT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
K.-U. Mettendorf
Affiliation:
Bruker AXS GmbH, Östliche Reinbrückenstraße 49, 76187 Karlsruhe, Germany
R. Eisenhower
Affiliation:
Bruker AXS GmbH, Östliche Reinbrückenstraße 49, 76187 Karlsruhe, Germany
M. Simon
Affiliation:
PI miCos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany
*
a)Author to whom correspondence should be addressed. Electronic mail: harald.vogt@kit.edu

Abstract

At the Institute of Microstructure Technology (IMT) of the Karlsruhe Institute of Technology (KIT), a new type of refractive X-ray optics has been developed. Owing to its comparably easy fabrication method and the large aperture, the so-called Rolled X-ray Prism Lenses (RXPL) have the potential to be used with X-ray tubes in an industrial environment as a low-cost alternative to existing optics. The lens itself is built out of a micro-structured foil which is cut into shape and rolled around a winding core to form a refracting element for X-rays. The resulting refractive structure can be used as illumination optics. Diffractometry experiments with an NIST 1976a sample were performed and showed up to an 18-fold enhanced integrated intensity compared to that acquired with a steel tube collimator.

Type
Technical Articles
Copyright
Copyright © International Centre for Diffraction Data 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Nazmov, V., Shabel'nikov, L., Pantenburg, F.-J, Mohr, J., Reznikova, E., Snigirev, A., Kouznetsov, S. and DiMichiel, D. (2004). “Kinoform X-ray lens creation in polymer materials by deep X-ray lithography,” Nucl. Instrum. Methods Phys. Res. B 217, 409416.CrossRefGoogle Scholar
Saile, V. (2009). Introduction: LIGA and Its Applications, LIGA and Its Applications, (Weinheim, Germany, Wiley–VCH Verlag GmbH & Co.) KGaA: 110.Google Scholar
Simon, M., Reznikova, E., Nazmov, V., Last, A. and Jark, W. (2008). X-ray prism lenses with large apertures. In: Khounsary, A. M., Morawe, C. und Shunji, G. (Ed.): Advances in X-Ray/EUV Optics and Components III. (San Diego, Kalifornien, USA, International Society for Optics and Photonics (SPIE)) (7077), p. 70771Q-170771Q-6.Google Scholar
Simon, M., Reznikova, E., Nazmov, V., Grund, T., and Last, A. (2010). A New Type of X-ray Condenser Lenses with Large Apertures Fabricated by Rolling of Structured Films, Proceedings of the 20th International Congress X-Ray Optics and Microanalysis, Karlsruhe, Germany, p. 85–90Google Scholar
Weisstein, E. W. (2013). “Archimedean Spiral.” from http://mathworld.wolfram.com/ArchimedeanSpiral.html.Google Scholar