Hostname: page-component-8448b6f56d-c47g7 Total loading time: 0 Render date: 2024-04-24T21:57:31.622Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of Dilute HF With Controlled Oxygen for Post Cu CMP Cleans

Published online by Cambridge University Press:  10 February 2011

K. K. Christenson  and
C. Pizetti
K. K. Christenson
Affiliation:
FSI International, 322 Lake Hazeltine Dr., Chaska, MN 55318, kchristenson@fsi-intl.com
C. Pizetti
Affiliation:
Metron Technologies Europe, christian3@compuserve.com
Get access

Abstract

Wet cleaning of wafers during the semiconductor production process often requires uniform removal of a few nanometers of material. Ideally, a single cleaning chemistry can be found that etches all exposed features at a comparable rate. Etch rates near 1 nm/min are desired for batch process and near 10 nm/min for single-wafer processes. A mixture of 500:1 DHF (dilute HF) with dissolved oxygen controlled near parts-per-million (ppm) levels has been found to meet these requirements for post copper CMP (chemical-mechanical polishing) cleans with exposed SiO2 and Cu metal.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 566: Symposium P – Chemical-Mechanical Poilshing-Fundamentals and Challenges , 1999 , 267
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Christenson, K. et al., “Effects of Sequential Chemistries on Particle Removal, “4'th International Symposium on Cleaning Technology in Semiconductor Device Manufacturing, R., Novak and J., Ruzyllo, eds., The Electrochemical Society, Pennington, NJ, PV95–20, 1996, pp. 567–574.Google Scholar
2. Christenson, K., Smith, S. and Werho, D., “Removing Metallic Contaminants in an RCA-2 Clean as a Function of Blend Ratio and Temperature,” Microcontamination magazine, Cannon Communications, June 1994.Google Scholar
3. Christenson, K., unpublished work.Google Scholar
4. Pourbaix, M., Atlas of Electrochemical Equilibria in Aqueous Solutions, 2 nd ed., NACE International, Houston, 1974, p. 389.Google Scholar
5. Skoog, D. and West, D., Fundamentals ofAnalytical Chemistry,3rd ed., Holt, Rinehart and Winston, , New York, 1976, p. 299.Google Scholar
6. Kirkaldy, J.S. and Young, D.J., Diffision in the Condensed State, Institute of Metals, London, 1987, pp. 94–95.Google Scholar
7. Christenson, K., “Benefits and Challenges of Centrifugal Spray Processor Technology,” Solid State Technology magazine, PennWell, Tulsa, OK, 40, 12, Dec. 1998, p. 55.Google Scholar