Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-05-08T04:21:13.462Z Has data issue: false hasContentIssue false
  • English
  • Français

Trapping of Chloride Ions in Cement Pastes Containing Fly Ash

Published online by Cambridge University Press:  25 February 2011

D. M. Roy ,
R. I. A. Malek ,
M. Rattanussorn  and
M. W. Grutzeck
D. M. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802 Also affiliated with the Department of Materials Sciences and Engineering
R. I. A. Malek
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
M. Rattanussorn
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
M. W. Grutzeck
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Chloride ions, when present at sufficient concentration in the concrete pore fluid, may be associated with corrosion of the reinforcing steel even in normally passivative environments. The effectiveness of fly ash containing pastes in trapping chloride ions was studied. A paste was prepared containing 30% low-calcium fly ash and 70% type I cement, with mixing water (50% by weight) containing 0.4% C1− with respect to the solid. Samples were cured at 25°C and 38°lC at 95% R.H. At designated times extending over a six-month period, the pore fluids were expressed from the hardened pastes using a squeezing cell designed for this purpose. Special precautions were taken to avoid carbonation of the fluids; contact with the atmosphere was minimized. The expressed fluids were analyzed by DC plasma emission spectrometry for cations and by automated selective ion exchange chromatography for anions. Other studies (XRD, thermal analysis) were carried out to identify the compounds formed and determine their mechanisms of formation. Investigations indicated that the mechanism of trapping chloride ion is partly chemical and partly physical through adsorption on the surface of fly ash particles (initially physical and subsequently chemical).

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 65: Symposium T – Fly Ash and Coal Conversion By-Products II , 1985 , 219
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Glasser, F.P., Angus, M.J., McCulloch, C.E., Macphee, D. and Rachman, A.A., in Scientific Basis of Nuclear Waste Management, Mat. Res. Soc. Symp. Proc. Vol. 44, (Materials Research Society, Pittburgh, PA, 1985) pp. 849–858.Google Scholar
2. Diamond, S., Baneyback, R.S. and Struble, L., in Proc. 5th Intl. Conf. on Alkali Aggregate Reactions in Concrete, Capetown (1981).Google Scholar
3. Page, C.L. and Vennesland, O., Materiaux et Constructions, 16 (91), 19–25 (1983).CrossRefGoogle Scholar
4. Glasser, F.P. and Marr, J., in The Chemistry of Chemically-Related Properties of Cement, edited by Glasser, F.P., British Cer. Soc. Proc. 35, 419–430 (1984).Google Scholar
5. Laschenko, V.A. and Loganina, V.I., Zhurnal Prikladnoi Khimii, 47, 645–647 (1974).Google Scholar
6. Malek, R.I.A. and Roy, D.M., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, Mat. Res. Soc. Symp. Proc. Vol. 43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985)Google Scholar
7. Malek, R.I.A., Licastro, P.H. and Roy, D.M., this volume.Google Scholar
8. Richartz, W., Zement-Kalk-Gips, 22, 447–56 (1969).Google Scholar
9. Budnikov, P.P. and Strelkov, M.I., in Symposium on Structure of Portland Cement Paste and Concrete, pp. 447–464, Highway Research Board (1966).Google Scholar
10. Grutzeck, M.W., Fajun, Wei and Roy, D.M., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, Mat. Res. Soc. Symp. Proc. Vol. 43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985) pp. 65–72.Google Scholar
11. Roy, D.M., Malek, R.I.A. and Silsbee, M., in Workshop on Blast Furnace Slag Cements and Concretes, Oct. 14–17, 1985, York, England.Google Scholar