Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-16T10:48:57.234Z Has data issue: false hasContentIssue false
  • English
  • Français

Titanium-Aluminide Alloys Between the Compositions Ti3 Al and TiAl

Published online by Cambridge University Press:  26 February 2011

J. C. Mishurda ,
J. C. Lin ,
Y. A. Chang  and
J. H. Perepezko
J. C. Mishurda
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, WI 53706.
J. C. Lin
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, WI 53706.
Y. A. Chang
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, WI 53706.
J. H. Perepezko
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin, Madison, WI 53706.
Get access

Abstract

Many questions still remain about the Ti-Al phase diagram, particularly for the compositions between the intermetallic compounds Ti3Al and TiAl. In an experimental study of the phase equilibria, titanium-aluminum alloys with 44, 46, 48, 50 at.% aluminum were produced by drop casting, HIP, and a double forging process method. Differential thermal analysis (DTA), optical metallography, and residual oxygen analysis were performed in order to characterize the low and high temperature phase equilibria of the alloys. The experimental results are compared with the calculated Ti-Al phase diagram which is being modeled concurrently. For the bcc, hcp and liquid phases, the Margules type of equations are used to represent the excess Gibbs energies. A maximum of six parameters are used for each of the phases. For the TiAl (Llo) and Ti3Al (D019 ) phases, the Wagner-Schottky type of equations are used to represent the Gibbs energies. All of the other phases are treated as line compounds. Values of the solution parameters were obtained by optimization using existing thermochemical and phase boundary data reported in the literature. The calculated results show that the high temperature hcp phase field is stable between approximately 34 at% Al, in equilibrium with β and α2 up to about 48 at% Al in equilibrium with γ and L and forms from the liquid by a peritectic reaction β+L-α. The experimental results obtained to date for the four alloys are consistent with the calculated equilibria which is being refined and also allows for an estimate of the metastable equilibria.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 133: Symposium H – High-Temperature Ordered Intermetallic Alloys III , 1988 , 57
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murray, J. L., Phase Diagrams of Binary Titanium Alloys, (ASM International, Metals Park, OH, 1989), p. 12 and pp. 22–24.Google Scholar
2. Graves, J. A., et al., Scripta Metall., 21, 567 (1989).Google Scholar
3. Levi, C. G., Valencia, J. J., and Mehrabian, R., in Processing of Structural Metals by Rapid Solidification, edited by Froes, F. H. and Savage, S. J. (ASM, Metals Park, OH, 1989).Google Scholar
4. McCullough, C., Valencia, J. J., Mateos, H., Levi, C. G., Mehrabian, R., and Rhyne, K. A., Scripta Metall., 22, 1131 (1988).Google Scholar
5. Shull, R. D., McAlister, A. J. and Reno, R. C., “Proc. 5th Int. Conf. on Ti” eds. Lutjering, G., Zwicker, U. and Bunk, W. (Deutsche Gesellschaft für Metallkunde, Munich) 3. 1459 (1985).Google Scholar
6. Jones, S. A., Shull, R. D., McAlister, A. J. and Kaufman, M. J., Scripta Met., 22 1235 (1988).Google Scholar
7. Chuang, Y. Y., Schmid, R., and Chang, Y. A., Metall Trans. A, 15A, 1921 (1984).Google Scholar
8. Liang, W. W., Chang, Y. A., Lau, S., and Gyuk, I., Acta Metall., 21, 629 (1973).Google Scholar
9. Hsiao, Y. J., Chang, Y. A., and Ipser, H., J. Electrochem. Soc., 124, 1286 (1977).Google Scholar
10. Gyuk, I., Liang, W. W., and Chang, Y. A., J. Less-Common Met., 38, 249, (1974).Google Scholar