Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-24T04:52:45.961Z Has data issue: false hasContentIssue false
  • English
  • Français

Three-Dimensional Contact Mechanics Studies of Zdol Hard Disk Lubricants

Published online by Cambridge University Press:  17 March 2011

Barry N. Lucas  and
Jack C. Hay
Barry N. Lucas
Affiliation:
Fast Forward Devices, LLC, 11020 Solway School Road, Suite 113, Knoxville, TN
Jack C. Hay
Affiliation:
Fast Forward Devices, LLC, 11020 Solway School Road, Suite 113, Knoxville, TN
Get access

Abstract

This paper reports the results of a study of the dynamic 3-dimensional response between a diamond point probe and a commercial hard-disk overcoat/lubricant system. The specific overcoat was CNx with a thickness of 50 Å. The lubricant layer was ZDOL with nominal thicknesses of 11 Å and 24 Å in unbonded and bonded conditions. The experiments were conducted with a constant lateral displacement oscillation in the z, x & y direction of 1 nm at a frequency of 125 Hz. Results of this study show that the bonded lubricant layer increases the lateral force required to maintain a constant lateral displacement oscillation compared to both the unlubricated CNx coating and the CNx coating with the unbonded lubricant.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 649: Symposium Q – Fundamentals of Nanoindentation & Nanotribology II , 2000 , Q3.9
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Oliver, W. C. and Pharr, G. M., J. Mater. Res., 7, 1564 (1992).Google Scholar
2. Loubet, J.-L., Bauer, M., Tonck, A., Bec, S., and Gauthier-Manuel, B. in Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructure, eds. Nastasi, M., Parkin, D. M., and Gleiter, H. (Kluwer Academic Publishers 1993) pp. 429–447.Google Scholar
3. Lucas, B. N., Oliver, W. C., Pharr, G. M., and Loubet, J.-L. in Thin Films: Stresses and Mechanical Properties VI eds. Gerberich, W. W., (Mater. Res. Soc. Symp. Proc. 436, 1996).Google Scholar
4. Hay, J. C. and Pharr, G. M. in Thin Films: Stresses and Mechanical Properties VII, eds. Cammarata, R. C. et al. (Mater. Res. Soc. Symp. Proc. 505, 1998).Google Scholar