Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T15:57:06.830Z Has data issue: false hasContentIssue false

Synchrotron X-Ray Topography of Dislocation Arrays

Published online by Cambridge University Press:  26 February 2011

J. C. Bilello*
Affiliation:
School of Engineering and Computer Science California State University, Fullerton Fullerton, California 92634
Get access

Abstract

The application of relatively low resolution x-ray topography methods, typically ∿ 1 micrometer, is limited in studies which involve large scale dislocation networks. However, the ability to non-destructively image wide areas for “thick” specimens at high intensity with a tunable x-ray source makes the synchrotron an ideal probe for a range of problems previously inaccessible by other methods. Some examples will be discussed such as: (a) crack initiation and propagation in fatigued bicrystals, (b) real-time in situ plastic deformation studies in strain-annealed Mo crystals, and (c) strain distributions in vapor deposited and LPE thin films on Si and GaAs substrates.

Type
Research Article
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bilello, J. C. and Bowen, D. K., in Applications of X-ray Topographic Methods to Materials Science, edited by Weissmann, S., Balibar, F., and Petroff, J-F., (Plenum Press, New York, 1984) pp. 211221.Google Scholar
2. Bilello, J. C., Chen, H., Hmelo, A. B., Liu, J. M., Birnbaum, H. K., Herley, P. J. and Green, R. E. Jr., Nucl. Instrum. & Meth., 215, 291 1983.Google Scholar
3. Bilello, J. C., in Mechanical Properties and Behavior of Solids: Plastic Instabilities, edited by Balakrishnan, V. and Bottani, C. E. (World Scientific Publishing Co., Singapore, 1986), pp. 118.Google Scholar
4. Bowen, D. K., Hmelo, A. B., Davies, S. T., and Bilello, J. C., Daresbury Laboratory Journal, 1982, 47.Google Scholar
5. Bilello, J. C., in Applications of X-ray Topographic Methods to Materials Science, edited by Weissmann, S., Balibar, F., and Petroff, J-F., (Plenum Press, New York, 1984), pp. 333342.Google Scholar
6. Hmelo, A. B., Bilello, J. C., Davies, S. T. and Bowen, D. K., in Applications of X-ray Topographic Methods to Materials Science, edited by Weissmann, S., Balibar, F., and Petroff, J-F., (Plenum Press, New York, 1984).Google Scholar
7. Bilello, J. C., in Mechanical Properties and Behavior of Solids: Plastic Instabilities, edited by Balakrishnan, V. and Bottani, C. E. (World Scientific Publishing Co., Singapore, 1986). pp. 146.Google Scholar
8. Hmelo, A. B., Bilello, J. C., Davies, S. T. and Bowen, D. K., Materials Lett., 2, 6 1983.Google Scholar
9. Wakharkar, V. and Bilello, J. C., presented at the 1986 APS Spring Meeting, Las Vegas, NV., 1986 (Unpublished).Google Scholar
10. Petroff, J-F. and Sauvage, M., J. Cryst. Growth, 43, 628 1978.Google Scholar
11. Kuo, C-L. and Bilello, J. C., to be published Jour. Appl. Phys., (1987).Google Scholar
12. Kuo, C-L., Vanier, P. and Bilello, J. C., Jour. Appl. Phys., 55, 375 1984.Google Scholar
13. Hart, M., J. Cryst. Growth, 55, 409, (1981).Google Scholar
14. Stock, S. R., Chen, H. and Birnbaum, H. K., in Applications of X-ray Topographic Methods to Materials Science, edited by Weissmann, S., Balibar, F., and Petroff, J-F., (Plenum Press, New York, 1984), pp. 135143.Google Scholar
15. Stock, S., Chen, H. and Birnbaum, H. K., Phil. Mag. 53A, 73, (1986).Google Scholar
16. Barnett, S. J., Tanner, B. K. and Brown, G. T., Mat. Res. Soc. Symp. Proc., Vol. 41, (1984), pp. 8388.Google Scholar
17. Tanner, B. K., X-ray Diffraction Topography, (Pergamon Press, New York, 1976), pp. 6397.CrossRefGoogle Scholar