Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-23T07:29:49.073Z Has data issue: false hasContentIssue false

Study of the Processes Related to the Water Uptake of Eurobitum Bituminized Radioactive Waste: Effect of Salt Concentration

Published online by Cambridge University Press:  15 February 2011

An Mariën
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Steven Smets
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Elie Valcke
Affiliation:
W&D Expert Group, SCK•CEN, Boeretang 200, 2400 Mol, Belgium
Get access

Abstract

A coupled hydro-chemical-mechanical constitutive law for the Belgian Eurobitum bituminized waste is being developed by the International Centre for Numerical Methods and Engineering (Polytechnical University of Cataluña, Spain) to contribute to the study of the compatibility of Eurobitum with Boom Clay as a geological disposal environment. A large experimental programme is ongoing at SCK•CEN to support the development of a constitutive law for Eurobitum. Water uptake tests are being performed under different conditions to obtain insights in the parameters that influence the water uptake behaviour of Eurobitum. Furthermore, Environmental Scanning Electron Microscopy and microfocus X-ray Computer Tomography are used to characterize hydrated samples in order to improve the understanding of the water uptake processes.

The salt content, the distribution of the salt crystals, and the membrane efficiency in the Eurobitum samples affect the swelling and pressure increase rate. High membrane efficiencies and a large amount of hygroscopic salts inside the Eurobitum samples result in very high pressures when almost no swelling is allowed. The pressure in small inactive samples with 28 wt.% NaNO3has risen to ∼19 MPa after ∼3 years of hydration in nearly constant volume conditions. Slower pressure increase rates are being measured for samples with 6, 12, 18, and 33 wt.% NaNO3.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Morgan, P. and Mulder, A., The Shell bitumen Industrial Handbook, Shell Bitumen, ISBN-0-95 16625-1-1, (1995), p. 41.Google Scholar
2 Eshrich, H., EUROCHEMIC Report 80-14, Mol-Dessel, Belgium, (1980).Google Scholar
3 Craen, M. De, Wang, L., Geet, M. Van and Moors, H., Scientific Report SCK•CEN-BLG-990, SCK•CEN, Mol, Belgium, (2004).Google Scholar
4 Mariën, A., Smets, S., Li, X. and Valcke, E., Mater. Res. Soc. Symp. Proc. 1107, p.151159, (2008).Google Scholar
5 Valcke, E. and Gens, R., ICEM07-7284, Proc. 11th Int. Conf. on Environ. Rem. and Rad. Waste Man. ICEM"07, ISBN 0-7918-3818-8, Order number 1785CD, (2007).Google Scholar
6 Valcke, E., Mariën, A. and Geet, M. Van, this conference (to be completed).Google Scholar
7 Li, X., Bernier, F. and Valcke, E., Mater. Res. Soc. Symp. Proc. 932, p. 751758, (2006).Google Scholar
8 Mokni, N., Olivella, S., Li, X., Smets, S. and Valcke, E., Physics and Chemistry of the Earth, Parts A/B/C, Volume 33, Supplement 1, p. S436–S443, (2008).Google Scholar
9 Sneyers, A. and Iseghem, P. Van, Mater. Res. Soc. Symp. Proc. 506, p. 565572, (1998).Google Scholar