Hostname: page-component-7c8c6479df-p566r Total loading time: 0 Render date: 2024-03-19T02:50:07.995Z Has data issue: false hasContentIssue false

Study of SiH4-based PECVD Low-k Carbon-doped Silicon Oxide

Published online by Cambridge University Press:  17 March 2011

Hongning Yang
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
Douglas J. Tweet
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
Lisa H. Stecker
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
Wei Pan
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
David R. Evans
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
S.-T. Hsu
Affiliation:
Sharp Laboratories of America, Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
Get access

Abstract

In previous studies, low-k carbon-doped silicon oxide (SiOC) films were deposited using organosilicon precursor: (CH3)xSiH4−x. In this paper, we present the properties of PECVD low-k SiOC films produced by using conventional SiH4 based gas precursors. The SiH4 based SiOC films have similar gross physical and electrical characteristics to those of (CH3)xSiH4−x based SiOC. Since the precursors are inexpensive, commercially available and convenient to operate for existing tools, the process should not require additional cost as compared with that of PECVD silicon dioxide. We demonstrate the feasibility of integrating Cu with SiOC on damascene interconnection. The evaluation on electrical performance of the Cu/SiOC based damascene structure will be discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. For a review, see Loboda, M. J. in Advanced Metalization Symposium, Orlando, FL. 1999.Google Scholar
2. McClatchie, S., Beekman, K., Kiermasz, A., Proceedings of DUMIC Conference, Santa Clara, CA, 1998, pp. 311 (1998).Google Scholar
3. Naik, M. and et al. , Proceedings 1999 IEEE Int'l Interconnect Technology Conference, pp. 181 (1999).Google Scholar
4. Grill, A. and et al. , Mat. Res. Soc. Proc. 565, 107 (1999).10.1557/PROC-565-107Google Scholar
5. Yau, Wai-Fan and et al. , in Advanced Metalization Symposium, Orlando, FL. 1999.Google Scholar
6. Parratt, L.G., Phys. Rev. 95, 359 (1954).10.1103/PhysRev.95.359Google Scholar
7. Boer, D.K.G. de, Phys. Rev. B44, 498 (1991).10.1103/PhysRevB.44.498Google Scholar
8. Ryn, Chooo Kun and et al. , in Advanced Metalization Symposium, Orlando, FL. 1999.Google Scholar