Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-25T13:24:32.362Z Has data issue: false hasContentIssue false

Structural Changes in Cellulose During Papermaking and Recycling

Published online by Cambridge University Press:  15 February 2011

Rajai H. Atalla*
Affiliation:
USDA Forest Service, Forest Products Laboratory One Gifford Pinchot Drive. Madison, WI 53705-2398
Get access

Abstract

Recent advances in understanding the structure of cellulose are used as the basis for analyzing the structural changes that occur in pulp fibers during papermaking, particularly in the drying stage. These changes are responsible for the degradation of papermaking properties, and they must be reversed during recycling if the maximum papermaking potential of the virgin fibers is to be recovered. A number of studies have assessed the structural transformations that can occur in cellulosic fibers upon exposure to elevated temperatures. The researchers have invariably observed that the changes occur at the secondary and tertiary levels of structure, the levels that can have significant effects on the properties of fibers. In addition, some studies have focused specifically on the structural effects of recycling; clear correlations of structural change with changes in paper characteristics have been reported. The results of the various studies point to directions for further investigations into enhancing the recovery of papermaking value from recycled fibers.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Atalla, R.H., in The Structures of Cellulose, Atalla, R.H., Ed., (ACS Symp. Series No. 340, American Chemical Society, Washington, DC, 1987, p. 1.)Google Scholar
2. Atalla, R.H. and VanderHart, D.L., in Cellulose and Wood: Chemistry and Technology, Schuerch, C., Ed., Proc. 10th Cellulose Conference, (Wiley-Interscience, NY, 1989, p. 169.)Google Scholar
3. Atalla, R.H., in Cellulose: Structural and Functional Aspects, Kennedy, J.F., Phillips, G.O., and Williams, P.A., Eds., (Ellis Horwood, 1989, p. 61.)Google Scholar
4. Atalla, R.H., J. Appl. Polym. Sci. 37, 295 (1983).Google Scholar
5. Jones, D.W., in Cellulose and Cellulose Derivatives, Pt. IV, Bikales, N. M. and Segal, L., Eds., (Wiley-Interscience, NY, 1971, p. 117.)Google Scholar
6. Atalla, R.H. and Vanderllart, D.L., Sci. 223, 283 (1984).Google Scholar
7. VanderHart, D.L. and Atalla, R.H., Macromol. 17, 1465 (1984).Google Scholar
8. VanderHart, D.L. and Atalla, R.H., in Structures of Cellulose, Atalla, R.H., Ed., ACS Symposium Series No. 340, (American Chemical Society, Washington, DC, 1987, p. 88.)Google Scholar
9. Haigler, C.H., in Biosynthesis and Biodegradation of Cellulose, Haigler, C.H. and Weimer, P.J., Eds., Marcel Dekker, NY, (1991), p. 99.Google Scholar
10. Atalla, R.H. and Nagel, S.C., Polymer Let. 12, 565 (1974).Google Scholar
11. Atalla, R.H. and Whitmore, R.E., Polymer Let. 16, 601 (1978).Google Scholar
12. Atalla, R.H. and Ellis, J.D., in Proceedings of the International Dissolving and Specialty Pulps Conference, TAPPI, p. 163, 1983.Google Scholar
13. Atalla, R.H., Ellis, J.D. and Schroeder, L.R., J. Wood Chem and Tech. 4, 465 (1984).Google Scholar
14. Atalla, R.H., in Hydrolysis of Cellulose, Brown, R.D. Jr. and Jurasek, L., Eds., Advances in Chemistry Series No. 181, (American Chemical Society, Washington, DC, 1979, p. 55.)Google Scholar
15. Horii, F., Yamamoto, H., Kitamaru, R., Tanahashi, M., and Higuchi, T., Macromol. 20, 2949 (1987).Google Scholar
16. Atalla, R.H., in Steam Explosion Techniques, Focher, B., Marzetti, A. and Crescenzi, V., Eds., (Gordon and Breach, Philadelphia 1991, p. 97.)Google Scholar
17. Atalla, R.H., Woitkovich, C.P., and Setterholm, V.C., Tappi J., 7(11), 116 (1985).Google Scholar
18. Bugajer, S., Effect of Recycling on Unbleached Kraft Paper, MS Research Project, (Institute of Paper Chemistry, Appleton, WI, 1975).Google Scholar